Applied Mechanics Commons^™

การทำความเย็นส่วนบุคคลโดยใช้วัสดุเปลี่ยนสถานะสำหรับบุคลากรที่สวมใส่ชุดป้องกันการติดเชื้อส่วนบุคคล, พรพุทธ วิสุทธิวัชรกุล

Chulalongkorn University Theses and Dissertations (Chula ETD)

ชุดป้องกันส่วนบุคคล (PPE) เป็นอุปกรณ์สำคัญที่ช่วยลดความเสี่ยงในการติดเชื้อของบุคลากรทางการแพทย์ อย่างไรก็ตาม การสวม PPE เป็นเวลานาน โดยเฉพาะในสภาพอากาศร้อนและชื้นอย่างประเทศไทย มักนำไปสู่การกักเก็บความร้อนในร่างกาย การระบายความร้อนลดลง และเกิดความไม่สบาย ความเหนื่อยล้า รวมถึงภาวะเครียดจากความร้อน งานวิจัยนี้จึงได้พัฒนาแบบจำลองชีวความร้อนอย่างง่าย (simplified bioheat model) โดยอ้างอิงโครงสร้างแบบจำลองแบบ passive ของ Fiala และเสริมด้วยการตอบสนองทางสรีรวิทยาแบบ active ที่จำเป็น เพื่อใช้ทำนายอุณหภูมิของร่างกายและประเมินความสบายทางความร้อนเมื่อสวม PPE ร่วมกับการระบายความร้อนด้วยวัสดุเปลี่ยนสถานะ (Phase Change Material: PCM) ผลการตรวจสอบความถูกต้องเทียบกับแบบจำลองอ้างอิงของ Fiala แสดงให้เห็นว่าแบบจำลองที่พัฒนาขึ้นมีความแม่นยำดี โดยมีความคลาดเคลื่อนของอุณหภูมิอยู่ภายใน ±0.2°C นอกจากนี้ผลการจำลองยังพบว่า PCM สามารถลดความเครียดจากความร้อนและเพิ่มความสบายทางความร้อนอย่างมีนัยสำคัญในช่วง 60 นาทีแรกของการทำงาน แม้ว่าประสิทธิภาพจะลดลงเมื่อ PCM หลอมละลายเต็มที่ก็ตาม ข้อจำกัดของงานวิจัยนี้ คือ แบบจำลองตั้งอยู่บนสมมติฐานของสภาวะอากาศร้อน (เริ่มต้นที่ 30°C) ทำให้ยังไม่สามารถแทนสภาวะอากาศเย็นได้อย่างสมบูรณ์ อีกทั้งไม่ได้พิจารณาการตอบสนองทางสรีรวิทยาระยะยาว เช่น ภาวะขาดน้ำ ความเหนื่อยล้า หรือความเครียดเชิงกลจากน้ำหนัก PCM ที่เพิ่มขึ้น ถึงแม้จะมีข้อจำกัดดังกล่าว แบบจำลองนี้ยังคงสามารถทำนายอุณหภูมิร่างกายและค่าความรู้สึกทางความร้อนแบบพลวัต (DTS) ได้อย่างมีประสิทธิภาพก่อนการใช้งานจริง จึงสามารถนำไปใช้เป็นเครื่องมือช่วยวางแผนระยะเวลาการทำงานที่ปลอดภัย และช่วยกำหนดปริมาณ รวมถึงตำแหน่งการติดตั้ง PCM ที่เหมาะสม ผลลัพธ์จากงานวิจัยนี้สามารถเป็นฐานข้อมูลสำคัญสำหรับการออกแบบชุด PPE ที่ปลอดภัย และช่วยลดภาระความร้อนสำหรับบุคลากรทางการแพทย์ในสภาพแวดล้อมร้อนชื้นได้ดียิ่งขึ้น

Controlling Nitrogen Pickup During Induction Melting Of Ultrahigh-Strength Cr-Ni-Mo-V Steels, Kingsley T. Amatanweze, Viraj A. Athavale, Mario F. Buchely, Laura N. Bartlett, Ronald J. O'Malley, Daniel M. Field

Materials Science and Engineering Faculty Research & Creative Works

Nitrogen pickup during air induction melting can result in porosity and a loss of fracture toughness in ultrahigh-strength quenched and tempered steel castings. Nitrogen atoms are easily adsorbed into liquid steel upon exposure to the air, and argon shrouding alone has limited effectiveness. Previous studies have shown that proper charge sequencing and maintaining a high amount of dissolved oxygen in the melt prior to tapping and deoxidation can limit nitrogen pickup in the melt. In the current study, the effect of melt practice and charging procedure on nitrogen pickup was studied as a function of hold time in a series …

Parametric Analysis Of Water Jet Descaling Efficiency Of Reheated Continuously Cast Thin Slab, Tochukwu P. Ojiako, Mario F. Buchely, Simon Lekakh, Ronald J. O'Malley, Richard Osei, Taha Tayebali

Materials Science and Engineering Faculty Research & Creative Works

Efficient oxide scale removal is critical for maintaining surface quality and process efficiency in steel manufacturing. This study optimizes water jet descaling by evaluating the performance of flat and rotary jet nozzles under varying process parameters. Using a combined approach of experimental analysis and computational fluid dynamics, it investigates the influence of pressure (138–275 bar), lead angle (0°, 15°, 25°), working distance (50–100 mm), and spray angle (15°–25°) on descaling efficiency. Findings indicate that flat jet nozzles achieve superior performance at short working distances due to concentrated impact forces, while rotary jet nozzles sustain efficiency over extended distances through dynamic …

Effect Of Gating Design On Filling And Inclusion Control In An Al-Killed Cr-Mo-Ni Steel, Kingsley T. Amatanweze, Koushik Balasubramanian, Soumava Chakraborty, Viraj A. Athavale, Mario F. Buchely, Laura N. Bartlett, Ronald J. O'Malley, Daniel M. Field, Krista R. Limmer, Katherine M. Sebeck

Materials Science and Engineering Faculty Research & Creative Works

The effect of gating system design on the inclusion population and size distribution in an aluminum-killed low-alloy advanced high strength steel casting was studied. A mold with four different gating systems: pressurized and non-pressurized with side risers, naturally pressurized with a side riser, and naturally pressurized with a top riser, was designed using computational fluid dynamics and solidification software. The design allowed inclusion populations in castings produced with each gating system to be compared during the same pouring event. Samples taken from different positions just below the top surface of each casting were analyzed using an SEM/EDS system with automated …

Analysis Of Ptfe Radial Lip Seals For Wheel Bearing Applications, Madison Vogt

Theses and Dissertations--Mechanical and Aerospace Engineering

A numerical analysis was conducted to investigate the viscoelastic effects of nonlinear materials on the sealing zone and contact pressure distribution of radial lip seals in a conventional geometric topology. The use of nonlinear materials in radial lip seal applications is desirable to improve operation and reliability of rotating machinery due to their high operating temperatures, chemical compatibility, and low friction coefficients. Examples include, but are not limited to, seals within industrial air compressors, turbine engines, aircraft landing systems, chemical processing equipment, and Freon pumps. This work focuses on analyzing the nonlinear viscoelastic response of pure Polytetrafluoroethylene (PTFE) and PTFE …

Growth Kinetics And Stability Of Metal Halide Perovskite Nanocrystals: Influence Of Stirring Speed And Water Exposure, You-Lin Huang

Theses and Dissertations--Mechanical and Aerospace Engineering

Cesium lead bromide (CsPbBr₃) perovskite nanocrystals (NCs) have garnered significant interest due to their exceptional optoelectronic properties, including high photoluminescence quantum yield, tunable bandgap, and excellent carrier dynamics. These attributes make them promising candidates for applications in light-emitting diodes, photovoltaics, and sensing technologies. However, optimizing their synthesis and improving their environmental stability remain critical challenges. This dissertation explores the growth kinetics of CsPbBr₃ NCs, focusing on the effects of stirring speed and water exposure on their structural and optical properties.

The synthesis of CsPbBr₃ NCs was performed using both mechanochemical (MC) and antisolvent methods, enabling an …

Machining-Induced Residual Stress Modeling Using Physics-Informed Neural Networks, Md Mehedi Hasan

Theses and Dissertations--Mechanical and Aerospace Engineering

Process-induced residual stress (RS) plays a critical role in determining the structural integrity, fatigue life, corrosion resistance, and dimensional stability of manufactured components. Tensile residual stress can be harmful to the machined workpiece by lowering fatigue strength, while compressive residual stress helps to prevent such issues. Therefore, accurate prediction and control of machining-induced residual stresses are essential for optimizing manufacturing processes and enhancing component performance. However, existing modeling approaches—empirical, analytical, and numerical—often have limited predictive accuracy, demand extensive calibration, or involve high computational costs. Traditional finite element analysis (FEA) provides modeling insights but is constrained by its high computational cost …

Damping Modulation Of Dampened Kapton Surfaces, Sebastian Esteban

Honors Undergraduate Theses

When droplets are vibrated or disturbed, they can exhibit a complex sloshing motion, an understudied behavior in drop physics. Droplet sloshing involves a complex combination of transverse and longitudinal motion that changes the droplet's effective weight on the surface the droplet is on. Our current understanding stems from preliminary work focusing on a cantilever beam of fixed thickness and variable viscosity of the liquid being sloshed. This investigation will focus on how variable cantilever thickness and constant viscosity for a liquid being sloshed affects the beam's deflection under consistent vibration. It will also investigate how the natural frequency of a …

Horizontal Infiltration Of Water Through Porous Snow As A Gravity Current, Anthony Cheng

Dartmouth College Master’s Theses

On the surface of the Greenland ice sheet or around the margins of the Antarctic ice shelf, water infiltrates porous ice. It is important to understand this infiltration process since water populating the pore space of ice directly impacts the density, porosity, and wetness of ice. These properties influence the mechanics and tensile strength of ice, as greater amounts of infiltration result in faster or more widespread deformation events, which may lead to adverse climatic effects such as sea level rise and ocean current disruption. While studies have considered the thermodynamics and fluid mechanics of water vertically percolating through snow …

Application-Driven Materials Development Of Solid-State Conductive Composites Of Ultra-High Molecular Weight Polyethylene, Peder Solberg

Dartmouth College Ph.D Dissertations

Ultra-high molecular weight polyethylene (UHMWPE) is a linear long chain homopolymer valued for its toughness, wear resistance, and chemical inertness. In the medical field, these properties make it the material of choice for bearing surfaces despite recognized tradeoffs between wear resistance, toughness, and oxidation resistance. Electrically conductive composites of UHMWPE show promise to enable new types of smart and active load-bearing implants in a future of personalized medicine, if beneficial properties can be maintained with the addition of solid-state additives.

Clinical need-finding conducted through Dartmouth’s Training Program in Surgical Innovation revealed several potential applications for conductive, load-bearing polymers. These include: …

Degradation Of Polymers And Polymer Composites In Extreme Environments, Ben T. Jewell

Dissertations, Master's Theses and Master's Reports

Polymeric materials are widely used in engineering applications due to their high strength-to-weight ratio, easy manufacturability, and cost-effectiveness. When incorporated into composites, they provide further performance enhancements, enabling use in demanding structural applications. However, long-term exposure to harsh environments including elevated temperatures, UV radiation, harsh chemicals, and radiation, can drive degradation processes that alter the material’s network structure, and in turn, degrade its mechanical performance. Exposure to thermo-oxidative conditions is one of the most common environments driving polymer degradation, leading to chain scission and crosslinking events, with the resulting oxidative products causing discoloration, reduced ductility, and changes in glass transition …

Knowledge Integrated Deep Learning For Enhanced Fault Diagnosis And Prognosis For Rotating Machinery And Its Applications On Marine Systems, Yunsheng Su

Dissertations, Master's Theses and Master's Reports

This dissertation develops a knowledge-informed deep learning framework for robust fault diagnosis and prognosis across various engineered systems, including bearings, lithium-ion batteries, and mooring systems in wave energy converters (WECs). A deep transfer learning (DTL) method is first developed to improve bearing fault diagnosis by fusing data from multiple sources and extracting key features using convolutional neural networks (CNNs). Building upon this, a knowledge-informed deep network (KIDN) framework is proposed, integrating physics-based features with deep learning to enhance diagnostic accuracy and generalizability. A constrained Gaussian process (CGP) model is further employed to guide adaptive network design and reduce model tuning …

Akronauts Turbopump Research Project, Gerald Drabeck Iii, Michael Mccalla, Joshua Skelton

Williams Honors College, Honors Research Projects

The idea of this project is to design a turbo pump template capable of fitting into future Akronauts rocket designs. This allows the rockets to travel higher due to the reduced net weight. Many methods were used to verify the rigidity and feasibility of the design, such as Finite Element Analysis and fluid dynamics simulations.

Dual Rotating Mount For Forward Facing Sonar, Javid Miller

Williams Honors College, Honors Research Projects

This project aims to create a mount for forward facing sonar (FFS) that will allow anglers to be able to rotate their sonar transducer manually, or in unison with their trolling motor. When in use with the trolling motor, the rotation will be transferred using a belt and pulley assembly. This assembly will be able to be disengaged to allow for manual rotation. This device is designed for use with the Minn Kota Ultrex trolling motor.

Experimental And Analytical Investigation Of Particle Dynamics In Newtonian And Non-Newtonian Fluids In A Taylor-Couette Cell, Andres F. Velez Mendoza

Dissertations and Theses

This doctoral dissertation investigates heavy particle sedimentation in Newtonian and non-Newtonian fluids, aiming to understand their behavior in Drilling Fluid (DF) systems used in oil and gas industry, where such phenomenon can lead to operational issues such as lost circulation, well control problems, and even blowouts. To simulate DF dynamics under operational conditions, this study utilizes a Taylor-Couette (TC) cell, which consists of a rotating inner cylinder and a stationary outer cylinder separated by a 9.0 mm annular gap. The TC cell allows for the investigation of the sedimentation behavior of spherical particles within both Newtonian fluids (deionized water and …

Ease Of Product Disassembly Through A Systematic Structured Time-Based Design For Disassembly Methodology, Emeka S. Igwe

College of Graduate Studies: Theses & Dissertations

This research introduces a systematic time-based design for disassembly (DfD) framework aimed at optimizing product disassembly by addressing important features like liaisons between components in product, component accessibility and the overall modularity of the product. This study specifically covers electromechanical and mechatronic systems in both household and industrial setup, identifying their disassembly challenges and high value pointers for improvement. The methodology involves using a design for disassembly framework called LeanDfD in carrying out a holistic disassembly process and evaluating quantitative metrics like disassembly time and complexity and suggesting further redesign strategies to minimize disassembly time and cost. Adopting this systematic …

Viscoelastic Property Analysis Of A Magnetorheological Elastomer Micropump For Insulin Delivery In Type 1 Diabetes, Victor Buitimea

College of Graduate Studies: Theses & Dissertations

Over two decades, there has been a significant rise in awareness regarding Type 1 Diabetes (T1D), leading to a deeper comprehension of numerous variables, including hereditary factors, patterns of occurrence, and health challenges. According to the Type 1 Diabetic Index, around 8.7 million people worldwide are affected by this chronic autoimmune illness marked by a lack of insulin and hyperglycemia. The introduction of artificial pancreas systems could save more than half a million patients by 2040. Despite the availability of various insulin delivery technologies that are offered to diabetic patients, many still are skeptical of this modern system. The issues …

Smart Materials For Noise And Vibration Damping In High-Speed Rail Systems: A Comparative Analysis, Hyginus Chidiebere Onyekachi Unegbu, Danjuma Saleh Yawas, Bashar Dan-Asabe, Abdulmumin Akoredeley Alabi

Makara Journal of Technology

Effective noise and vibration control remains a critical challenge in high-speed rail systems, directly influencing passenger comfort and the longevity of infrastructure. This study evaluated four advanced materials—piezoelectric materials, shape memory alloys (SMAs), magnetorheological (MR) fluids, and damping composites—focusing on their potential for mitigating noise and vibration in high-speed rail applications. A combination of experimental and simulation-based analyses was employed to assess these materials based on their noise reduction coefficient, vibration transmissibility ratio, thermal stability, and durability under varying environmental conditions. The findings revealed that damping composites and SMAs demonstrated superior performance, offering enhanced noise attenuation and vibration control compared …

Deformation Mechanism In Gold Nanoparticles Under Compressive Loading: Insights From Atomistic Modelling And Unsupervised Machine Learning, Tanuj Gupta

All Dissertations

Gold nanoparticles (AuNPs) offer exciting possibilities due to their inertness, malleability, and tunable structures, making them valuable for applications ranging from nanomedicine to electronics. Their optical, mechanical, and other properties can be tailored by modifying shape and structure, underscoring the importance of understanding their deformation behaviour at the nanoscale. This study used classical molecular dynamics simulations with LAMMPS to investigate the deformation mechanisms of gold nanospheres (AuNS) under uniaxial compression. Employing the embedded atom method (EAM) potential to model atomic interactions, AuNS with 20 nm in diameter were compressed along the z-direction using planar indenters moving at a constant …

Greek Key-Inspired Fractal Metamaterials With Enhanced Flexibility And Energy Absorption., Zhennan Zhang

Electronic Theses and Dissertations

Architected materials with intricate three-dimensional (3D) geometries offer unique properties and functionalities but face challenges in manufacturing costs and complexity. This research explores the integration of simple 2D Greek Key-inspired lattices into fractal designs to achieve exceptional mechanical performance. Using 3D printing and kerfing, these fractal structures demonstrate enhanced flexibility and energy absorption capabilities. Through three-point bending and in-plane tensile tests, the 2D fractal lattices exhibited a 600-fold reduction in bending force and a tensile stretch capacity of up to 520%, significantly outperforming brittle parent materials. Out-of-plane compression tests revealed a five-fold increase in energy absorption compared to honeycomb structures, …

Influence Of Hygrothermal Conditions Of The Bistability Of Asymmetric Carbon Fiber Laminate Composites, Celia Hill

All Theses

Carbon fiber-reinforced polymer (CFRP) laminates have widespread use in many industries because of their exceptional strength-to-weight ratio. Carbon fiber laminates following an asymmetric layup orientation can exhibit bistability meaning the laminate can exist at two stable geometric configurations. The morphing characteristics of bistable CRFP has a growing level of interest because of its potential in various applications including space aircraft structures for easy repair, automotive structures for energy dissipation and ergonomics, robotics for flexible motion and energy harvesting. Existing research shows that both moisture and temperature affect the material properties and behavior of CFRP laminates, however, the influence of moisture …

Hitch Cart “Landing Gear”, Rebekah White, Jose Raygoza, Randy Hernandez, Brandon Leon

Mechanical Engineering

This report aims to allow our sponsor, to review our design process of the Hitch Cart Landing Gear Prototype. In the design overview section of this report, we discuss the primary design modifications we made to the wheel mechanism of the existing hitch cart prototype, including the addition of the ACME screws and the folding brackets. This allows our sponsor to see the intended improvements made to the past prototype and understand the primary goal of our project. Then, in the implementation section, we cover the entire manufacturing process to allow our sponsor to understand what manufacturing steps must be …

The Waterbug: Adaptive Paddle Board Frame, Remy James Elio Lacchia, Katie Kellum, Madeline Evenson, Shelbi Sullaway

Mechanical Engineering

People with disabilities, particularly wheelchair users, face limitations in participating in outdoor activities like paddleboarding. Central Cal Adaptive, a nonprofit organization, aims to bridge this gap by offering adapted paddleboarding experiences. However, their current paddleboard presents challenges such as portability, range of motion, stability, and safety. Our team, comprising Madeline Evenson, Remy Lacchia, Katie Kellum, and Shelbi Sullaway, has collaborated with Central Cal Adaptive to refine the existing paddleboard design. The team’s goal is to enhance the paddleboard's functionality to better cater to wheelchair users' needs, ensuring lightweight, portable, and safe features for an improved outdoor experience.

Our paddleboard concept …

Finite Element Analysis And Verification Of Transverse Mechanical Properties Of Generally Cylindrical Orthotropic Constitutive Modeling Of 3-Phase Nanocomposite Unit Cell, Christopher J. Hawkins

Master's Theses

Fiber-reinforced composites are increasingly popular due to their specific strength and stiffness, making them ideal for high-performance applications. However, these materials primarily exhibit superior properties in-plane, while their out-of-plane characteristics remain comparatively weaker. Previous research has shown that the most effective method to enhance out-of-plane properties involves the incorporation of carbon nanotubes. Experimental tests have demonstrated significant improvements in properties such as tension, flexural, short beam shear, and fracture toughness. Alongside these experimental studies, analytical equations have been developed to predict the behavior of these composites under various loading conditions, including tension, bending, shear, and fracture. Existing models primarily address …

An Efficient Computational Frameworks For Design And Analysis Of Metamaterials, Raj Pradip Khawale

All Dissertations

Advancement in additive manufacturing helps in building artificial lattice structures with unique properties that are not available in naturally occurring materials or in continuum structures. Specifically, beam-based lattices are well known for producing lightweight structures with very high strength, auxetic behavior, and energy absorption capabilities. In recent years, numerous research studies have been conducted on generating algorithms and frameworks to obtain unusual properties based on the variation in the cell geometry and material properties. However, the exploration of the full design space is hampered in practice primarily due to restrictions on cell tiling variation. Additionally, the lattices are very intricate, …

3d Printed Microfluidic Fabrication Methodology, Characterization, Mechanical Design, And Applications In Electrostatic Artificial Muscles And Benthic Microbial Fuel Cells, Terak B. Hornik

Master's Theses

The fabrication of microfluidic devices often requires specialized methods. The development of these methods requires careful characterization and understanding of the processes involved. Using primarily PolyJet 3D printing technology, microfluidics offers a wide scope of applications such as microfluidic benthic microbial fuel cells (MBMFCs) and electrostatic artificial muscles. MBMFCs benefit from the confinement of the microbes resulting in close proximity between the electrode and the organisms. Using a modular design called the Sponge, assembly and upscaling is possible. Electrostatic artificial muscles benefit from a microfluidic approach due to the non-linearity of electrostatic attraction creating disproportionate benefits when miniaturized. When designed …

An In-Situ Method For Quantifying Entropy Generation In Fatigue Via A Novel Thermographic Approach, Peyton J. Wilson

LSU Master's Theses

This work features a new approach that is used to measure the rate of plastic work during a cyclic fatigue test, based on the first and second laws of thermodynamics. Using the one-dimensional Fourier heat equation coupled with the concept of fracture fatigue entropy, the rate of plastic work during fatigue can be measured without the need to interrupt a fatigue test, and the accumulated entropy to failure can be quantified. Experimental fatigue tests are conducted on Aluminum 6061-T6 specimens under cyclic axial loading and Carbon Steel 1018 specimens under fully reversed cyclic bending loading. The obtained results in addition …

Seismic Resilience Of Timber Homes, Melia R. Costa

College of Engineering Summer Undergraduate Research Program

The vast majority of residential buildings in California are wood-frame structures. A home is typically a very large investment for families, and damage to the home can be detrimental to a family’s economic success. Thus, reducing the economic impacts of an earthquake on residential timber housing is crucial. A full scale, two-story section of a residential timber house is in construction in the Parson’s Geotechnical and Earthquake Engineering Laboratory on the Cal Poly campus in San Luis Obispo, California. Once built it will be put through earthquake simulation tests on a shake table with various magnitudes of seismic activity. Next, …

Assessing The Importance Of Air-Decking Blasting In Controlling Bigv At An Open Pit Gold Mine In Tanzania Using Ann Model, Karim R. Baruti

Tanzania Journal of Engineering and Technology (TJET)

Air-decking blasting technique is used to control blast induced ground vibration (BIGV) in several mines including open-pit gold mines located in Tanzania. While the importance of air-deck to control BIGV is practically evident, theoretical models such as BIGV prediction models cannot be used to assess the importance of air-decking. The main objective of this study was to assess the importance of the air-decking blasting technique to control BIGV using the artificial neural network (ANN)Model. To achieve this objective, ANNs were modeled and trained to learn the pattern of data using Multilayer Perception with Back Propagation to predict BIGV. The main …

Dynamic Model Of An Overhead Crane, Leonard Ruesga

UNLV Theses, Dissertations, Professional Papers, and Capstones

In this thesis a novel spatial model of an overhead crane was developed. The model includes: bridge, trolley, driving and follower wheels for the bridge and trolley, drum, cable, and the payload. The model accounts for the winding/unwinding of the cable around the drum as the payload is raised/lowered. The cable and the payload were considered as rigid bodies with uniformly distributed mass. First, the kinematic equations of the model were developed by using constraint equations. Second, the dynamic equations were derived through use of Newton’s Laws. Developing the rotational dynamic equations required the determination of the angular momentum vectors …