Engineering Education Commons^™

A Third-Year Review Of Design And Packaging Of Sensor Systems, M. Brian Thomas, Andrea Mitofsky, Vukica Jovanovic, John Eiler

Engineering Technology Faculty Publications

Faculty from the Electrical Engineering and Design Engineering Technology Departments at Trine University have developed a joint design module for upper-level courses in their respective disciplines. In this module, student teams collaborate in designing and prototyping the electronics and packaging for a hand-held sensor system. The principal objective of the collaboration is for students to incorporate design factors external to their discipline in a program-focused design project. This effort advances the students' abilities to work effectively in multidisciplinary teams during their senior capstone courses. The design module was introduced in the fall 2011 semester, and was repeated in fall 2012 …

A Collaborated Process With A Wireless Autonomous Vehicle At It's Center, Thomas B. Stout, Steve C. Hsiung

Engineering Technology Faculty Publications

Developing partnerships between high schools, community colleges and universities is critical for the successful transitions to a lifelong STEM careers. How do you develop these partnerships? The sharing of a technology platform such as autonomous vehicles can bridge the gap by using a common core group of materials. Collaborations between teachers and faculty indifferent schools that share common interests in teaching control systems and robotics technology can be an excellent start. The university as catalyst in the process by designing the curriculum, system hardware and software then through the common interest deploying them in the high schools and community college. …

Enabling Multidisciplinary Perspective In Student Design Project: Fast Fashion And Sustainable Manufacturing Systems, Vukica M. Jovanovic, Manveer Mann, Petros J. Katsioloudis, Daniel L. Dickerson

Engineering Technology Faculty Publications

Fast fashion retailers are growing faster than any other type of retailer due to their ability to offer trendy low-cost clothing mimicking latest runway trends with turnaround times as low as two weeks. Fueled by short production and distribution lead times, fast fashion retailers combine rapid prototyping, small batches of fashionable product designs, and efficient transportations and delivery. Among others, the methods applied in fast-fashion industry include mass customization and personalization, and lean manufacturing. Current trends in manufacturing lean towards the application of digital and rapid manufacturing methods and increased use of product lifecycle management, knowledge management systems and computer …

Delivery Of Hands-On Technical Courses Through Real-Time Distance Learning, Steve C. Hsiung, John M. Ritz, Ece Yaprak, Feng Jao

Engineering Technology Faculty Publications

It is generally believed that it is too challenging to deliver technical laboratory courses using distance learning technologies. The focus of this research was to develop strategies that may be used to address these challenges. A research team composed of faculty from several universities and community colleges explored what might be needed to make these types of technical laboratory course instruction possible using distance learning technologies. The team explored delivering a microcontroller embedded systems design course through audio-visual distance learning technologies. The team's research and development activities are discussed. These include focuses on the technical training equipment that had to …

Dissemination Of Microprocessor Courses Through Classroom And Interactive Cyber-Enabled Technologies, Steve C. Hsiung, John M. Ritz, Ece Yaprak, Thomas B. Stout, Richard L. Jones

Engineering Technology Faculty Publications

The project is in the middle stages of the implementation. There seems to be a positive attitude of learning and using of the training system and curriculum package by all project staffs. Microchip, Inc. and microEngineering Labs, Inc. have donated supplies to support the hardware and software development for this project. The next objectives are team training, recruitment of interested trainees/teachers to participate in training for summers 2014, and assess the effectiveness of the implementations with teachers and students. Photo 2 is the project logo that describes all the concepts of this project.

Simulating Real-World Work Experience In Engineering Capstone Courses, Thomas H. Deagostino, Vukica M. Jovanovic, M. Brian Thomas

Engineering Technology Faculty Publications

Experiential learning and cooperative education provide students with the necessary tools to succeed in the workplace by simulating their future working environment. Various studies have shown that many graduates have gaps related to their so called "soft skills", which are related to teamwork, time management, working under pressure and tight deadlines. The main purpose of the inclusion of the industry expert in senior design discussions is to provide meaningful feedback through a competitive led by industry practitioners. In this simulation, the senior engineering students take on the role of actual engineering job functions, on a demanding, continuous basis for the …

Initial Investigation Of Analytic Hierarchy Process To Teach Creativity In Design And Engineering, Jennifer G. Michaeli, Gene Hou, Xiaoxiao Hu, May Hou

Engineering Technology Faculty Publications

This paper investigates the use of Analytic Hierarchy Process to teach design creativity and innovation in undergraduate engineering students. Examples are included to assess its effectiveness in the classroom. The purpose of this research is to investigate the suitability of the Analytic Hierarchy Process (AHP) to teach design innovation and creativity in undergraduate engineering classrooms. AHP is a very structured, multi-criteria, decision-making process and traditionally has been used to solve complex problem sets. This investigation takes a fresh look at how AHP provides the framework to engage and encourage students to think creatively and innovatively in design and engineering. This …

Teaching Laboratory Courses Using Distance Learning Technologies, Steve C. Hsiung, John Ritz

Engineering Technology Faculty Publications

Conducting laboratory activities is essential for teaching and learning in engineering and technology subjects. This article discusses explorations made by a research team to find solutions to enable the distance-learning delivery of laboratory courses on embedded microcontroller technology topics. In addition, this article includes a review of videoconferencing and course management tools, uniquely designed laboratory equipment and supporting curriculum materials, and statistical evidence showing students can learn technical laboratory content in distance-learning environments.

Lessons In On-Campus And Distance Learning Delivery Of An Introductory Naval Architecture Course, Jennifer G. Michaeli

Engineering Technology Faculty Publications

This paper describes the author’s experiences in multi-mode (face-to-face and online) delivery of an introductory-level course on the topic of Naval Architecture geared towards anaudience of engineering and engineering technology undergraduate students with no previousmaritime background. The goal of this course is to expose talented undergraduate engineering students to the marine industry and to prepare those interested in pursing a career in this field with an introductory understanding of the complex nature of designing and building ships and other marine vessels. This course was offered in Spring 2013 and Fall 2013 to a group of engineering and engineering technology students. …

Measuring The Educational Benefits Of Diversity In Engineering Education: A Multi-Institutional Survey Analysis Of Women And Underrepresented Minorities, Terrell Lamont Strayhorn, Leroy L. Long Iii, Michael Steven Williams, Marjorie Luce Dorime-Williams, Derrick L. Tillman-Kelly

Publications

Changing demographics of the U.S. population drive growing emphases on diversity in engineering education. Still, questions persist about the educational benefits of race and gender diversity within the student population, despite decades of supportive research. The present study sought to estimate the educational benefits that accrue to undergraduate engineering students who interact with diverse peers and perspectives. Furthermore, differences across gender and race were explored. Multi-institutional survey data were analyzed for over 100 undergraduate engineering students using a 2007 administration of the National Survey of Student Engagement (NSSE). Findings show that encouraging contact among students from different economic, social, or …

African American And Hispanic Stem Students' Engagement At Predominantly White Institutions, Terrell Lamont Strayhorn, Fei Bie, Leroy L. Long Iii, Blossom A. Barrett

Publications

Although research has shown that involvement is a helpful predictor of students’ future success, underrepresented minorities (i.e., African Americans and Hispanics) face unique obstacles at predominantly White institutions, which limit their engagement in educationally purposeful activities. Survey data from a 2007 administration of the National Survey of Student Engagement (NSSE) were analyzed to measure African American and Hispanic students’ engagement in educationally purposeful activities. Results from the present study found that student satisfaction in college is positively related to time spent preparing for class and frequency of interactions with faculty members about careers. Furthermore, African American and Hispanic science, technology, …

Integrating Information Into The Engineering Design Process, Michael Fosmire, David Radcliffe

Purdue University Press Books

Engineering design is a fundamental problem-solving model used by the discipline. Effective problem-solving requires the ability to find and incorporate quality information sources. To teach courses in this area effectively, educators need to understand the information needs of engineers and engineering students and their information gathering habits. This book provides essential guidance for engineering faculty and librarians wishing to better integrate information competencies into their curricular offerings. The treatment of the subject matter is pragmatic, accessible, and engaging. Rather than focusing on specific resources or interfaces, the book adopts a process-driven approach that outlasts changing information technologies.

After several chapters …

Ole Miss Engineer 2013-2014

Ole Miss Engineer

No abstract provided.

Active Learning Using Model-Eliciting Activities And Inquiry-Based Learning Activities In Dynamics, Jeffrey Phillip Georgette

Master's Theses

This thesis focuses on a year-long project of implementing active learning in undergraduate dynamics courses at Cal Poly San Luis Obispo from 2012-2013. The purpose is to increase conceptual understanding of critical dynamics concepts and to repair misconceptions of the students. Conceptual understanding in Dynamics is vital to understanding the big picture, building upon previous knowledge, and better understanding the behavior of engineering systems. Through various hands-on activities, students make predictions, test their conceptions, and solve real world problems. These active learning methods allow students to improve their learning of Dynamics concepts. Education research on active learning is present in …

Computer Self-Efficacy, Cognitive Actions, And Metacognitive Strategies Of High School Students While Engaged In Interactive Learning Modules, Harry Budi Santoso

All Graduate Theses and Dissertations, Spring 1920 to Summer 2023

The purpose of this research was to investigate high school students’ computer self-efficacy, cognitive actions, and metacognitive strategies in a self-regulated learning (SRL) framework while utilizing an interactive learning module. The researcher hypothesized that computer self-efficacy is correlated positively with cognitive actions and metacognitive strategies while the students are engaged with interactive learning modules. This research used a mixed-methods approach to answer the research questions. Two research questions guided this research: (1) How is students’ computer self-efficacy related to cognitive actions and metacognitive strategies while using interactive learning modules?; and (2) How do students plan monitor their cognitive actions, and …

Motor Protection Lab Experiment Using Sel-710, Ozro Corulli

Electrical Engineering

Advancements in microprocessor based relay technology for power protection applications provide quicker response times and new methods of mitigation. This project develops a lab experiment for Cal Poly class EE444 - Power Systems Laboratory based on the Schweitzer SEL-710 motor protection relay. Learning objectives for this lab include relay setup, programming, and protection schemes for the following conditions: undervoltage, loss of phase, fault, locked rotor, and thermal overload. Today, utility companies across the globe use SEL relays for primary system protection, putting engineers familiar with their operation in high demand.

An Investigation Of The Asit Problem-Solving Method On Middle School Technology Education Student's Ability To Produce Creative Solutions, Jared Aaron Merrill

Theses and Dissertations

This study compared two groups of students being instructed in various methods of problem solving over a two-week period. The control group was instructed using the standard Career and Technology Education (CTE) Introduction curriculum on using brainstorming to solve problems. The treatment group was instructed using a structured problem solving method developed to help focus problem solving on finding a solution that satisfies the conditions. Students were selected from 7th grade students at a suburban middle school in Utah. The independent variable in this study was the type of problem solving instruction received. The dependent variables of interest were the …

The Humanistic Side Of Engineering: Considering Social Science And Humanities Dimensions Of Engineering In Education And Research, Morgan Hynes, Jessica Swenson

Journal of Pre-College Engineering Education Research (J-PEER)

Mathematics and science knowledge/skills are most commonly associated with engineering’s pre-requisite knowledge. Our goals in this paper are to argue for a more systematic inclusion of social science and humanities knowledge in the introduction of engineering to K-12 students. As part of this argument, we present a construct for framing the humanistic side of engineering with illustrative examples of what appealing to the humanistic side of engineering can look like in a classroom setting, and opportunities for research that examines the dynamics the humanistic side of engineering introduces into engineering learning and teaching. The illustrative examples are drawn from interactions …

Secondary Students' Conceptual Understanding Of Engineering As A Field, Devlin B. Montfort, Shane Brown, Victoria Whritenour

Journal of Pre-College Engineering Education Research (J-PEER)

Researchers have long been interested in how to recruit and retain more and more diverse students into engineering programs. One consistent challenge in this research is understanding the impacts of interventions from the point of view of the student, and how their preconceptions may influence that effectiveness. This study investigated how secondary students understand the concept of engineering, including what engineering is and what engineers do. The purpose of this work was to describe students’ conceptions of engineering, and to determine how those perceptions relate to student interest in engineering careers. The investigation was founded on the theoretical framework of …

Validating The Critical Engineering Literacy Test (Celt) With Cognitive Interviews, Margot L. Keimig, Senay Purzer

The Summer Undergraduate Research Fellowship (SURF) Symposium

The CELT learning assessment focuses on the critical thinking skills of engineering students and allows for the improvement of information literacy, one’s ability identifying and implementing important information. With the pairing of cognitive interviewing, the CELT will allow for the identification of errors and will better determine the reasoning in the decisions made by the students taking the test. The CELT test uses multiple choice and open response questions to evaluate the students and the areas where improvements need to be made. Over the course of the year, the students’ information literacy skills will be expanded and then re-evaluated at …

Visualizing Mechanics: Improving Student Learning Through Video Demonstrations, Blake A. Wetherton, Olumide A. Awofeso, Carolyn E. Creighton, Adam F. Potrzebowski, Charles M. Krousgrill, Jeffrey F. Rhoads

The Summer Undergraduate Research Fellowship (SURF) Symposium

The Purdue Mechanics Freeform Classroom (PMFC) is a project that seeks to reform engineering mechanics education by integrating content and technology; enhancing communication between students, their peers, and instructors; accommodating a broader range of learning styles; and facilitating greater depths of understanding. In an attempt to increase the PMFC’s efficacy, a series of demonstration videos has been produced. As demonstrated by the popularity and pervasiveness of websites such as YouTube, short videos have the potential to captivate audiences. As such, these videos have incredible promise in educational contexts. In the PMFC series of videos, entitled Visualizing Mechanics, each imitates the …

Development Of Pneumatic Robot For Outreach, Eshamogbo E. Ojuba, John Lumkes

The Summer Undergraduate Research Fellowship (SURF) Symposium

To encourage the current generation of high school and middle school students to pursue careers in engineering, it is important to have challenging hands-on engineering activities for them. Such activities should be interesting, compelling, and, most importantly, educative. A mini-excavator was built for fluid power outreach, but this tool only demonstrates fluid power, without showing other important aspects of engineering. The tool being developed is able to demonstrate fluid power, as well as other important aspects of engineering, such as controls, electronics, and programming. This tool is an electronically-controlled device that allows the user control a pneumatic circuit, coupled with …

Engineering Experience Through The Cansat Competition - An Opportunity For Student Development Of An Aerospace System, Trey Mcferrin

Von Braun Symposium Student Posters

No abstract provided.

Lunabotics: A Student Competition For Exploring The Challenges Of Regolith Harvesting In Extraterrestrial Environments, Ethan Hopping, Roberto Dextre

Von Braun Symposium Student Posters

No abstract provided.

2013 Student Launch Initiative Project With Dielectrophoresis, Amit Patel, Jacob Cranford

Von Braun Symposium Student Posters

No abstract provided.

Sweet (Small Wind Energy Estimation Tool), Thomas Woolmington, Keith Sunderland

Other resources

Description:

Generic Wind Energy Estimation Model incorporating Turbulence Intensity.

Requirements:

Manufacturer specific wind turbine characteristic

Mean wind speed at a specific height

Site conditions in terms of TI and Surface Roughness

Disclaimer:

This model has been designed as an estimation tool for estimating the wind power yield of a custom turbine for an idealised set of site conditions for a given year.

While the assumptions that are made in this estimation tool are mathematically plausible they should not in any way be interpreted as an alternative to a real world site assessment.

A list of assumptions to which the model …

Free Your Mind-Unlock Your Inner Creativity, Alyssa Black, William Dow, Stephanie Harrison, Adam Kerbs, Katheleen Mcguire, Phillip Stroch, Jessica Urbano, Bradley Chase, Frank G. Jacobitz, Thomas Schubert

School of Engineering: Faculty Scholarship

Creativity is a major factor in many careers, subjects, and disciplines. Although many people first assume engineering to be a field of study that does not require any creativity, it is actually an essential tool for successful engineers. The mark of a truly accomplished engineer is the ability to problem-solve effectively; in other words, to generate creative solutions. Although the goal as engineers is to become more creative throughout one’s career, is it even possible to gain creativity? Is creativity an innate quality, or a learned one? Since the engineering process demands creativity, we looked into how creativity can be …

Bridging The Gap Between Engineering Design And Pk-12 Curriculum Development Through The Use The Stem Education Quality Framework, Margaret Pinnell, James Rowley, Sandi Preiss, Rebecca P. Blust, Rebecca Beach, Suzanne Franco

Mechanical and Aerospace Engineering Faculty Publications

This paper will describe a unique partnership among the Department of Teacher Education and School of Engineering at the University of Dayton (UD) and the Dayton Regional STEM Center (DRSC). This partnership resulted in the development of the STEM Education Quality Framework (SQF), a tool to guide educators in teaching, learning and refining STEM education. The SQF resulted in a variety of educational tools, including a STEM curriculum template, that was implemented in the DRSCs teacher professional development and curriculum development program entitled the STEM Fellow Program. The STEM Fellow program was later modeled in a unique, NSF sponsored six …

Issues In Organisation And Management Of Multidisciplinary Group Design Projects, Ken Keating, Claire Brougham, Graham Gavin, Ger Reilly

Conference Papers

No abstract provided.

Defining Characteristics Of An Integrated Stem Curriculum In K-12 Education, Vinson Robert Carter

Graduate Theses and Dissertations

The purpose of the study was to obtain consensus concerning the defining characteristics of integrated STEM (Science, Technology, Engineering, and Mathematics) curriculum. This study utilized a three round modified Delphi study to solicit recommendations from experts of STEM education in order to: 1) create a set of categorical and defining curricular components needed to develop and implement appropriate integrated STEM curriculum; 2) identify the characteristics that set integrated STEM education curriculum apart from single-discipline curricula; 3) discuss the components necessary to gauge whether an initiative, project, or curriculum should be referred to as integrated STEM education; and 4) examine whether …