Engineering Education Commons^™

Every Publication Needs An Author Verified Tl;Dr Statement, Sarah Oerther, Daniel B. Oerther

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

No abstract provided.

Future Of Bse Days 2025: Growing A Regenerative Bse, Derek M. Heeren, Santosh Pitla, Jennifer R. Keshwani, Mark Stone

Department of Agricultural and Biological Systems Engineering: Presentations and White Papers

The Future of BSE Days 2025: Growing a Regenerative BSE brought together over 150 faculty, staff, students, and partners to envision the next quarter-century of the Department of Biological Systems Engineering. The event emphasized regeneration—not only of resources and ecosystems, but also of ideas, learning models, and relationships. Across seven major sessions—three Spark Talks and four Pillar Workshops—participants explored how BSE can thrive amid technological disruption, demographic change, and societal transformation.

Key Outcomes

Redefining Impact: This session challenged participants to evolve from counting outputs to valuing relationships, collaboration, and community well-being.

Adaptive Learning Models: This discussion introduced design studios, micro-credentials, …

Using Design Thinking To Upcycle, Lily Chabica

ENGS 15.11: Design and Education

This 60-minute lesson introduces the power of design thinking as a tool for sustainability. Through short discussions, visual examples, and a hands-on “Trash Island” design challenge, students will explore how creativity can transform waste into value. The session combines theory (understanding upcycling vs. recycling) with active practice (building prototypes from found materials). By the end, students will connect environmental responsibility to personal agency. They will realize that design can drive everyday impact.

A Novel Low-Complex Optimized Resource Allocation Algorithm Using Gwo Optimization Technique In Energy Scavenging For Wban, M. Samir Abou El-Seoud, Amira Olazan, Albashir A. Youssef

Computer Science

In wireless body area networks (WBANs) powered by energy scavenging, effectively managing renewable energy is critical to ensuring delay-sensitive services. This paper proposes a novel low-complex optimized resource allocation algorithm using the Grey Wolf Optimization (GWO) technique to allocate resources, specifically energy and communication channels, and maximize user utility while guaranteeing the worst-case delay. To achieve this, firstly, a formulation of a user utility optimization problem that accounts for the stochastic nature of energy scavenging and consumption without requiring prior knowledge of these processes is performed. Utilizing GWO optimization techniques, optimization problems broke down into four sub-problems: battery management, collection …

Transforming Engineering Education: Project-Based Learning And Technology Integration In A Senior-Level Mechanisms Course, Krishnanand Kaipa, Anurag Purwar, Orlando M. Ayala, Sebastian Bawab

Mechanical & Aerospace Engineering Faculty Publications

Engineering education faces the challenge of preparing students for a rapidly evolving, interdisciplinary field that demands a strong foundation in theoretical principles, practical skills, and the ability to solve real-world problems. This study describes a project-based learning (PBL) intervention implemented in a senior-level mechanical engineering course focused on mechanisms analysis and design. The intervention combined foundational coursework with bio-inspired design projects, where students developed walking end-effector robotic mechanisms for medical applications. Students utilized tools such as MotionGen software and SnappyXO kits to synthesize, simulate, prototype, and test their designs. Qualitative analysis of student evaluations and project reports revealed that the …

Wip-Monarch Accelerator Program To Engineering: A Reflection On The First Semester, Kristin Eden, Jeffrey W. Fergus, Stacie I. Ringleb

Mechanical & Aerospace Engineering Faculty Publications

This work in progress paper examines the Monarch Accelerator Program to Engineering (MAP2E) program. The MAP2E Program was developed to assist students who desire to become engineers but may need additional assistance in math and science. and it allows students to develop their math and science skills while creating a pathway to personal or professional enriching skills. Furthermore, the MAP2E program allows students to develop their math and science skills and create parallel pathways to personal or professionally enriching skills. For instance, a student may hope to one day start their own engineering firm. A business administration pathway would allow …

Developing Entrepreneurial Mindsets In Construction Management Through Experiential Projects, Dalya Ismael

Engineering Technology Faculty Publications

Entrepreneurial Minded Learning (EML), a framework supported by the Kern Entrepreneurial Engineering Network (KEEN), promotes critical thinking and innovation by encouraging students to explore real-world problems through the 3Cs: Curiosity, Creating Value, and Connections. In construction management education, the focus often remains on technical skills and project execution, neglecting the development of entrepreneurial skills like adaptability, value creation, and stakeholder engagement, leaving a gap in preparing students for the challenges of the industry. To bridge this gap, micro-moment activities were introduced prior to the main project to prime students for EML-based thinking. These short, focused exercises encouraged students to solve …

Engagement In Practice: Partnering With Communities To Address Nuisance Flooding Challenges, Carol L. Considine, Mujde Erten-Unal, Dalya Ismael, Luka Alandra Hamal-Serenity, Farzaneh Soflaei

Engineering Technology Faculty Publications

Many communities are already experiencing the impacts of climate change that disrupt their daily lives. In Coastal Virginia, these impacts take the form of nuisance and stormwater flooding caused by sea level rise and changes in precipitation. Coastal Virginia has one of the highest relative sea level rise rates on the Atlantic Coast and the regional planning district commission recommends that Atlas 14 rainfall intensity, duration, and frequency curves be increased by 20% to account for changes in rainfall. The Coastal Community Design Collaborative (CCDC), a partnership between Hampton University Architecture and Old Dominion University Engineering & Technology, has had …

Embrace The Journey: Exploring Induction Experiences Of Teachers In Ohio Independent Stem Schools, Laura Sass

Indiana STEM Education Conference

The beginning years of a new teacher are a critical period. This study investigated perceptions of induction activities of new teachers in Ohio Independent STEM schools. STEM-based pedagogies such as problem-based learning and inquiry are core strategies in STEM schools but can be new for beginning teachers. Through a Q-sort, thirteen participants from three Independent STEM Schools ranked statements on a +5 to -5 scale of agreement. This along with a post-sort survey resulted in themes. Positive school culture and colleague collaboration and the impact of the mentoring were found to be the most impactful. This research aligns with literature …

Shaping Engineering Technology Students’ Perceptions Of Manufacturing Through Experiential Learning In A Flipped Classroom – A Case Study, Rustin Webster

School of Engineering Technology Faculty Publications

This study examined how an introductory, survey-based manufacturing systems and processes course – which uniquely integrated a flipped classroom structure and multiple experiential learning elements – influenced engineering technology (ET) students’ perceptions of careers, workforce expectations, workplace dynamics, and essential industry skills within manufacturing. Pooled qualitative data from 52 ET student’s pre- and post-course reflection surveys, administered across four cohorts, were analyzed using topic modeling, sentiment analysis, comparative assessments, keyword frequency analysis, and/or impact assessment. The data offered valuable insights into students understanding of essential job skills, definitions of a good job, and perceptions of factory work. Before the course, …

Indiana Stem Teachers’ Perceptions Of The Shift From In-Person To Virtual Training During The Covid-19 Pandemic, Steve Heinold

Indiana STEM Education Conference

The COVID-19 pandemic brought uncertainty to Indiana teachers in 2020. School closings caused disruptions to teachers’ classroom settings, ongoing training, and social and mental well-being (Pozo-Rico et al., 2020). Indiana GEAR UP’s commitment to teacher professional development for STEM educators led to a shift from their in-person summer teacher training sessions to virtual, just months after the school shutdowns in spring 2020. Participant evaluations showed that teachers appreciated the virtual training options and were able to learn new strategies to apply to their new virtual learning spaces. The online training sessions also had drawbacks. This research brief describes recommendations to …

Spatio-Visual Reasoning And Teamwork Through Hands-On Stem Construction Activities, Comfort Temitope Aje, Maria Eloisa C. Nuguid, Melihan Ünlü, Humphrey Chinenye Ochulor

Indiana STEM Education Conference

This study examined a STEM activity in which students in grades K-6 designed and built a model of Snoopy’s doghouse with considerations for constraints, teamwork, and iterative design. By combining spatial reasoning with imagination and visualization, students collaborated to create 3-D structures from 2-D plans, demonstrating enhanced spatial visualization and the ability to connect geometry to a tangible engineering task. The findings highlight the value of spatio-visual design activities in promoting skills like spatial reasoning, critical thinking, and problem-solving.

Cultivating Ethical Data Stewardship For Undergraduate Research: A Framework And Toolkit Duo, Wei Zakharov, Senay Purzer, Carla Zoltowski

Libraries Faculty and Staff Scholarship and Research

Data drives nearly every aspect of research today, from the earliest stages of problem definition to the final dissemination of results. Undergraduate students—often at the beginning of their research journeys—are increasingly working with complex, data-intensive projects. Yet many enter these environments without sufficient training in how to manage, share, and use data responsibly. They may know how to run code or analyze a dataset, but questions of ethics, reproducibility, preservation, and stewardship are rarely an explicit part of this preparation. To address this gap, our interdisciplinary research team at Purdue University launched a multi-year, NSF-funded project entitled Prioritizing Data Life …

Leveraging Undergraduate Expertise For Effective Stem Instruction: Insights From A Forensic Science Teaching Partnership, Swagata Sarkar, Hui-Hui Wang, Austin R. Jenkins, Mariah K. Stollar

Indiana STEM Education Conference

Although integrated science, technology, engineering, and mathematics (STEM) instruction has been cited as a viable instructional approach to increasing the number of students interested and prepared to enter the STEM workforce, teacher content knowledge can be a limiting factor to effective implementation (Ejiwale, 2013). To address this limitation, college STEM majors can use their content expertise to support the development and implementation of integrated STEM experiences for K-12 students (Ferrara et al., 2018). This research brief reports on a university-high school partnership where undergraduate students in a university forensic science club created and implemented integrated STEM lessons in a local …

The Aftermath Of An Earthquake: Healing Power Of Engineering For Turkish Elementary School Children, Pinar Fettahlioglu, Senay Purzer, Cagan Findikkiran

Indiana STEM Education Conference

The February 6th, 2023, earthquake significantly impacted children in Turkey, causing both physical and emotional challenges. To help students enhance their understanding of earthquakes and their impact, we have integrated engineering-based STEM activities in a 5th-grade classroom. Students designed earthquake-proof structures and tested their strength. The research involved 15 students from the earthquake-affected region of Adana. Data included a conceptual understanding scale using a single-group pre-test and post-test design. Analysis indicated that students had limited prior knowledge about the causes of and safety measures for earthquakes before the intervention. Post-test results revealed statistically significant improvements in their learning.

Stem Education In Indiana: Analyzing The Availability Of Stem-Certified Schools For Underrepresented Communities, Bryan J. Duarte

Indiana STEM Education Conference

This study examines the equity of access to STEM-certified schools in Indiana, focusing on differences in student demographics between STEM-certified and non-STEM-certified schools. The results show no statistically significant differences in the percentage of female, non-White, or lower socio-economic students between the two groups. However, significant differences were found in the percentages of Latiné/a/o/x, Native Hawaiian or Pacific Islander, and Asian students, with these groups being underrepresented in STEM-certified schools compared to non-STEM-certified schools.

Boosting Computational Thinking In Integrated Stem Education With Cad, Hyeong Kyun Park, Jung Han, Yunjin Lim

Indiana STEM Education Conference

Integrated STEM education offers a powerful approach to enhancing students’ learning. By integrating science inquiry, technological literacy, engineering design, and mathematical thinking, integrated STEM fosters students’ 21st-century competencies, such as creativity, critical thinking, collaboration, and computational thinking. Drawing from a national integrated STEM project, this research uses a classroom case study to investigate the integration of Computer-Aided Design (CAD) and 3D printing into a STEM learning activity. It examines the use of mathematical computation to determine the best solution for a prototype that meet functional criteria. This research highlights how introducing CAD instruction enhances computational thinking within a conceptual framework …

Integrating Turtle Graphics And Engineering Design: Enhancing Problem-Solving And Critical Thinking Through Digital And Physical Prototyping, Abigail Erskine

Indiana STEM Education Conference

This research brief is a review of literature on integrating Turtle Graphics and engineering design to enhance students' problem-solving and critical thinking through prototyping. Integrating Turtle Graphics with digital and physical prototyping engages students in the engineering design process, helping them bridge abstract mathematical concepts with real-world applications. By combining programming and engineering design, Turtle Graphics supports complex tasks like visualization and design modeling, which improves students’ critical thinking, design thinking, and problem-solving skills. Through iterative testing and refinement, students gain practical insights into engineering concepts such as modeling and creating prototypes.

Rebuilding The Spatial Visualization Test, Maerianna Artang, Maia Catterall, Yagmur Onder, Nrupaja Bhide, Dhinesh Balaji Radhakrishnan, Jennifer J. Deboer

Indiana STEM Education Conference

Literature demonstrates that spatial visualization skills are crucial for students entering engineering and are used as early indicators of success. Historically, studies stated that students of gender or cultural minorities in engineering scored lower than their White, male counterparts. However, recent studies critically question the research approaches used in such studies (Bartlet, 2023; Önder et. al, 2023). We investigate the possible reasons for this score discrepancy and explore the construction of an asset-based spatial visualization assessment. Our work expands the area of spatial visualization development as applied in engineering design, specifically for the scope of marginalized learner contexts. We incorporated …

Proceedings Of The Tenth Annual Indiana Stem Education Conference: Generational Advances Through Stem Education, William S. Walker Iii, Lynn A. Bryan, S Selcen Guzey

Indiana STEM Education Conference

The Proceedings of the Tenth Annual Indiana STEM Education Conference are edited by the Center for Advancing the Teaching and Learning of STEM (CATALYST, https://www.education.purdue.edu/catalyst/) at Purdue University. The theme for the 2025 conference is Generational Advances through STEM Education. This year’s conference provides opportunities to learn about effective STEM education strategies, curriculum, and resources to engage students by considering the advances and impact of STEM.

Ginger: The Effect Of Illustrated Storybooks On Children’S Response And Teachers’ Facilitation In Stem Education, Defne Yabas, Tugba Abanoz, M. Sencer Corlu

Indiana STEM Education Conference

This study aims to explore children’s and teachers’ responses to the integration of illustrated storybook content into STEM activities in early childhood. The correlation between STEM content and illustrations in children's storybooks conveying scientific information is a crucial aspect that can impact children's learning of STEM. Studies have reported the utilization of storybooks in STEM education for young children (Abanoz & Yabaş, 2022; Pantoya et al., 2015), yet an absence of research has been noted regarding the impact of illustrated storybooks on children's engagement in STEM education. There is substantial research evidence that early childhood teachers have low self-efficacy beliefs …

Informal Education Experiences: Why Stem Camps Matter, Jeffrey A. Nowak, Dale Ruppert

Indiana STEM Education Conference

This research brief details some of the positive impacts of student participation in after-school STEM (Science, Technology, Engineering, and Mathematics) camps provided by universities and informal education centers as described in published literature. In addition, the authors reviewed 2,841 anonymous participant surveys of 1^st-12^th grade students involved in nineteen STEM camps held at Purdue University Fort Wayne from 2019-2024 for related findings. Findings indicate that providing an enjoyable and enriching learning environment for STEM camps can foster a mindset of curiosity and a love for learning. Students who attend STEM camps likewise often experience a range of …

Mathematical Modeling For Interdisciplinary Stem Problem-Solving, Dayat Hidayat, Signe Kastberg

Indiana STEM Education Conference

STEM education supports students’ real-world problem solving by utilizing connections between STEM disciplines. Yet teachers have questions about how to provide such support. Mathematical modeling involves the use of mathematics content and processes to solve problems in integrated STEM contexts. In this research brief we illustrate how mathematical modeling can support students’ integrated STEM problem solving.

Ripples Of Change: Middle School Students Navigating The Future Of Our Watershed Through Eco-Stem, Elizabeth Andrew Thiel

Indiana STEM Education Conference

Ripples of Change is an eco-STEM unit designed to address Indiana’s environmental education goals by fostering environmental literacy and informed decision-making among middle school students. By engaging students in community-based learning activities that empower students to address watershed issues, this eco-STEM unit promotes culturally sustaining integrated STEM education. Preliminary findings indicate increased student awareness and responsibility for their impact on local ecosystems using evidence-based reasoning, highlighting the potential for Ripples of Change to inspire global citizenship in students and scalable eco-STEM approaches.

Leveraging Algebraic Thinking In Stem Education To Equip The Next Generation Of Problem Solvers, Asenath Odondi, Comfort Temitope Aje

Indiana STEM Education Conference

Algebraic thinking is a critical skill in mathematics education, involving pattern recognition, generalization, symbolic manipulation, and problem-solving. It is essential for success in STEM fields and should be developed throughout education, starting in early grades. This literature review synthesizes research on algebraic thinking, focusing on problem-based learning. The review indicates that incorporating algebraic thinking into problem-based learning with non-routine activities enhances students' understanding and real-world problem-solving in STEM.

Observing Evidence Of Fixation During K-12 Engineering Design Challenges Using Variables Adapted From Post-Secondary Research, Sopheak Seng, William S. Walker Iii

Indiana STEM Education Conference

Design fixation is a phenomenon impacting students when they generate ideas for an engineering challenge and subsequently hesitate to consider alternative ideas throughout the design activity. Research into fixation with post-secondary students has shown that fixation can limit the quantity and the quality of design solutions. This research brief will describe how fixation has been measured at the post-secondary level and suggest the need for complementing quantitative with qualitative analyses.

Impacts Of Informal Stem Summer Camps On Middle School Student Stem Identity, Austin R. Jenkins, Joshua Faith, Steve Heinold

Indiana STEM Education Conference

Informal or out of school STEM spaces have been documented as sites of positive STEM identity development for youth historically marginalized in formal STEM spaces (Çolakoğlu et al., 2023). To increase the number of students who develop positive STEM identities during the critical juncture of middle school, Indiana GEAR UP offered summer camps to rising 7th and 8th grade students at selected middle schools across the state. Longitudinal interviews with students indicate the importance of informal STEM spaces, like summer camps, in fostering positive STEM identity development.

Innovative Stem Learning Through Solar Oven Design: Promoting Creativity And Teamwork In Stem Education, Humphrey Chinenye Ochulor, Abigail Erskine, Comfort Temitope Aje

Indiana STEM Education Conference

STEM education benefits significantly from integrating design-based learning (DBL) which fosters student creativity and teamwork. This research brief examines how solar oven design projects for K-12 students that involve DBL promote students' creative skills and teamwork. A literature review was done to investigate how solar oven design activities impacted student learning. Research has shown that students improve creativity and teamwork when these activities are carried out using DBL strategies.

Integrating Sustainable Practices Into Lean Engineering: Applying The Engineering For One Planet Framework In Manufacturing Engineering Technology Education, Dalya Ismael, Vukica M. Jovanovic, Murat Kuzlu, Charles Lowe, Lisa Bosman

Engineering Technology Faculty Publications

A growing number of manufacturers are recognizing significant financial and environmental benefits from adopting sustainable business practices. Sustainable manufacturing refers to the production of goods through processes that are economically sound, minimize environmental impact, and conserve energy and natural resources. Lean engineering, a comprehensive approach to decision-making and leadership within manufacturing organizations, has proven effective in driving sustainable practices. Key strategies include waste elimination, value identification, value stream mapping, flow creation, pull system establishment, and continuous improvement. Both lean manufacturing and sustainability share a common focus on minimizing waste. Lean principles address seven types of waste: transport, inventory, motion, waiting, …

Using Quanser Platform To Introduce Engineering Technology Students To Autonomous Vehicles, Otilia Popescu, Logan Beaver, Murat Kuzlu, Krishnanand Kaipa

Engineering Technology Faculty Publications

The area of autonomous vehicles is not new, but the latest advances in various technologies gave it a new boost in the last decade and it keeps growing in interest. However, undergraduate curricula rarely include courses specific to this area, which is considered mostly an interdisciplinary graduate field. While various programs introduce students to the background needed to understand and approach the field, specific work on autonomous vehicle projects is left for extra curriculum activities or student clubs, and eventually for senior (capstone) projects. This paper presents the work of a team of electrical engineering technology students on an autonomous …