Engineering Education Commons^™

An Operationalized Model For Defining Computational Thinking, Tony A. Lowe, Sean B. Brophy

School of Engineering Education Graduate Student Series

The Computational Thinking (CT) conceptual framework is entering its second decade of research yet still lacks a cohesive definition by which the field can coalesce. The lack of clear definition makes assessment tool challenging to formulate, pedagogical efforts difficult to compare, and research difficult to synthesize. This paper looks to operationalize differing definitions of CT enhancing the ability to teach then assess the presence of CT. Expanding upon CT definitions, industry practices and processes, and educational theory, we link existing concepts and propose a new element to model an active definition of CT as a theoretical framework to guide future …

Libraries Embrace The Engineering Grand Challenges, James A. Van Fleet

Faculty Conference Papers and Presentations

The National Academy of Engineering has put forward 14 Grand Challenges for Engineering in the 21st Century. These are addressed by students at participating universities through a Grand Challenge Scholars Program. Each program is unique, approved by application to the NAE, and administered by faculty and staff at the participating institution.

There are obvious opportunities for libraries and librarians to be an active part of the GCSP. Students are required to develop a research project around one of the challenges. They may take courses designed with the Grand Challenges in mind, seek out opportunities to develop global perspectives, and participate …

Impact Of Integrated E-Learning Modules In Developing An Entrepreneurial Mindset Based On Deployment At 25 Institutions, Nadiye O. Erdil, Ronald S. Harichandran, Jean Nocito-Gobel, Cheryl Q. Li, Maria-Isabel Carnasciali

Engineering and Applied Science Education Faculty Publications

In this paper, we describe an innovative curricular model employed at the University of New Haven to develop an entrepreneurial mindset in engineering students. The entrepreneurial mindset in this model is characterized by the Kern Entrepreneurial Engineering Network (KEEN)’s 3C’s, which are curiosity, connections and creating value. The core of the model is the integration of short, self-paced, e-learning modules into courses spanning all four years of all engineering and computer science programs. A flipped classroom instructional model is used to integrate the modules into courses. We are in the third year of implementation on campus, and following a pilot …

Understanding The Impact Of Strategic Team Formation In Early Programming Education, Tony A. Lowe, Sean B. Brophy

School of Engineering Education Graduate Student Series

This evidence based research looks at the impact of a team-based instruction on learning to program in a first year engineering course designed under the Bauhaus studio model. Each team is formulated with a “more knowledgeable other” [1], or for this paper the “ringer” based on selfreported prior learning. The ringer is intended to support the team through early programming challenges. In addition to the professor and teaching assistants, having a peer mentor can yield higher satisfaction and confidence in learners [2]. Our analysis evaluates learning outcomes as student progress through the term, comparing performance based on the performance and …

Influencing Student Motivation Through Scaffolded Assignments In A Quality Analysis Course And Its Impact On Learning, Nadiye O. Erdil

Engineering and Applied Science Education Faculty Publications

This paper discusses the impact of various class assignments and activities that build upon each other with the aim of increasing student motivation and student learning in a Quality Analysis course. Scaffolding is an instructional strategy that aims to reduce the amount of cognitive effort that students have to make to learn the materials by breaking down the material into more manageable components. In this study, critical thinking scaffolding is applied in the quality analysis course by structuring several elements to lead students to an assignment that is more complex. At the end of the semester, the impact assessment of …

Establishment Of Innovative Shared Departments To Advance Interdisciplinary Education, Ronald S. Harichandran, Brian Kench, Summer Mcgee, Michael A. Collura, Jean Nocito-Gobel, Charles David Skipton

Engineering and Applied Science Education Faculty Publications

More and more universities are pursuing interdisciplinary academic activities that span across department and college boundaries. Administrative structures to facilitate such programs are difficult to establish within traditional university frameworks consisting of disciplinary departments and colleges. Often interdisciplinary programs are housed in a traditional disciplinary department or college, or in a standalone center reporting to a college dean or the provost. The difficulty of these structures is obtaining broad buy-in from faculty across departments and having disciplinary degree programs include interdisciplinary coursework.

To overcome the difficulties described above, an innovative shared department structure that fosters collaborations to advance interdisciplinary education …

Teachers’ Incorporation Of Argumentation To Support Engineering Learning In Stem Integration Curricula, Corey A. Mathis, Emilie A. Siverling, Aran W. Glancy, Tamara J. Moore

Journal of Pre-College Engineering Education Research (J-PEER)

One of the fundamental practices identified in Next Generation Science Standards (NGSS) is argumentation, which has been researched in P-12 science education for the previous two decades but has yet to be studied within the context of P-12 engineering education. This research explores how elementary and middle school science teachers incorporated argumentation into engineering design-based STEM (science, technology, engineering, and mathematics) integration curricular units they developed during a professional development program. To gain a better understanding of how teachers included argumentation in their curricula, a multiple case study approach was conducted using four STEM integration units. While evidence of argumentation …

Students’ Successes And Challenges Applying Data Analysis And Measurement Skills In A Fifth-Grade Integrated Stem Unit, Aran W. Glancy, Tamara J. Moore, Selcen Guzey, Karl A. Smith

Journal of Pre-College Engineering Education Research (J-PEER)

An understanding of statistics and skills in data analysis are becoming more and more essential, yet research consistently shows that students struggle with these concepts at all levels. This case study documents some of the struggles four groups of fifth-grade students encounter as they collect, organize, and interpret data and then ultimately attempt to draw conclusions or make decisions based on these data. The activities in which the students engaged were part of an integrated science, technology, engineering, and mathematics (STEM) unit that had students collecting and analyzing data both in the context of learning science concepts and in the …

Perspectives On Failure In The Classroom By Elementary Teachers New To Teaching Engineering, Pamela S. Lottero-Perdue, Elizabeth A. Parry

Journal of Pre-College Engineering Education Research (J-PEER)

This mixed methods study examines perspectives on failure in the classroom by elementary teachers new to teaching engineering. The study participants included 254 teachers in third, fourth, and fifth grade who responded to survey questions about failure, as well as a subset of 38 of those teachers who participated in interviews about failure. The study first examines the literature about failure in the contexts of engineering and education. Failure is positioned as largely normative and expected in engineering, whereas in education, learning and failure have a more tenuous relationship. Identity, failure avoidance, failure as part of the learning process, growth …

Undergraduate Engineers And Teachers: Can Students Be Both?, Malinda S. Zarske, Maia L. Vadeen, Janet Y. Tsai, Jacquelyn F. Sullivan, Denise W. Carlson

Journal of Pre-College Engineering Education Research (J-PEER)

Today’s college-aged students are graduating into a world that relies on multidisciplinary talents to succeed. Engineering college majors are more likely to find jobs after college that are outside of STEM (science, technology, engineering, and mathematics) fields, including jobs in healthcare, management, and social services. A survey of engineering undergraduate students at the University of Colorado Boulder in November 2012 indicated a desire by students to simultaneously pursue secondary teacher licensure alongside their engineering degrees: 25 percent ‘‘agreed’’ or ‘‘strongly agreed’’ that they ‘‘would be interested in earning grades 7–12 science or math teaching licenses while [they] earn [their] engineering …

Examining Experienced Teachers’ Noticing Of And Responses To Students’ Engineering, Aaron W. Johnson, Kristen B. Wendell, Jessica Watkins

Journal of Pre-College Engineering Education Research (J-PEER)

Engineering design places unique demands on teachers, as students are coming up with new, unanticipated ideas to problems along often unpredictable trajectories. These demands motivate a responsive approach to teaching, in which teachers attend their students’ thinking and flexibly adapt their instructional plans and objectives. A great deal of literature has focused on responsive teaching in science and mathematics, but there has been little research or professional development on this approach in engineering. In this work, we conducted clinical video-based interviews with six elementary teachers experienced in teaching engineering to discuss what they noticed in their students’ thinking and how …

Elementary Teachers’ Reflections On Design Failures And Use Of Fail Words After Teaching Engineering For Two Years, Pamela S. Lottero-Perdue, Elizabeth A. Parry

Journal of Pre-College Engineering Education Research (J-PEER)

This mixed-methods study examines how teachers who have taught one or two units of the Engineering is Elementary (EiE) curriculum for two years reported on: students’ responses to design failure; the ways in which they, the teachers, supported these students and used fail words (e.g. fail, failure); and the teachers’ broad perspectives and messages to students about failure. In addition, the study explores how strategies, perspectives, messages, and fail word use may change after two years of engineering instruction. This study builds on previous work about elementary teachers’: perspectives on failure prior to teaching engineering, and responses to and perspectives …

From Creativity To Classification: A Logical Approach To Patent Searching, Marian G. Armour-Gemmen

Faculty & Staff Scholarship

Engineering students and professors need to understand and search intellectual property. In the past, librarians have instructed them on using the United States Patent Classification (USPC). In 2015, after a period of transition, the United States Patent and Trademark Office phased out the USPC and began exclusively classifying in the Cooperative Patent Classification (CPC). This adoption presented librarians a challenge of instructing students and professors in the easiest and most effective patent search. By tying patent searching to an example and presenting classification in an understandable fashion using CPC in conjunction with USPC, this writer presents a logical directed search …

Listening And Negotiation Ii, Adjo A. Amekudzi-Kennedy, Kevin D. Hall, Trevor Scott Harding, Amy J. Moll, Janet Callahan

Materials Science and Engineering Faculty Publications and Presentations

This paper is based on a panel held in June, 2017 in Columbus, Ohio, jointly sponsored by the Women in Engineering Division and by the Minorities in Engineering Division. It is focused on negotiation, with an emphasis on providing practical strategies that are relevant in an academic setting. The panel featured academic leaders at multiple levels, including professor, chair and dean, from diverse engineering institutions, ranging from teaching-centric to heavily research-focused. Panelists discussed strategies for negotiation, with an emphasis on an approach that meets the interests of both parties to the extent possible. The panel was administrated with an opening …

Establishing Doctoral Programs In Electrical Engineering, Materials Science And Engineering, And Computing In An Emerging Research Institution: Lessons Learned And Best Practices, Janet Callahan, Cheryl B. Schrader, Darryl P. Butt, Timothy Anderson, Tammi Vacha-Hasse, Amy J. Moll

Materials Science and Engineering Faculty Publications and Presentations

Over the past decade, three doctoral programs have been launched at Boise State University. The first doctoral program established was in Electrical and Computer Engineering, selected because of the need for a trained workforce in the region. The other two doctoral programs, Materials Science and Engineering, and Computing, were from the start designed as interdisciplinary degree programs. That is, they were designed for the participation of not just program faculty within the division, but for the participation of program faculty with related research interests in other departments at the university. This paper presents the steps taken to launch the programs, …

Calculus Reform: Increasing Stem Retention And Post-Requisite Course Success While Closing The Retention Gap For Women And Underrepresented Minority Students, Doug Bullock, Janet Callahan, Jocelyn B. S. Cullers

Mathematics Faculty Publications and Presentations

Boise State University (BSU) implemented an across-the-board reform of calculus instruction during the 2014 calendar year. The details of the reform, described elsewhere (Bullock, 2015), (Bullock 2016), involve both pedagogical and curricular reform. Gains from the project have included a jump in Calculus I pass rate, greater student engagement, greater instructor satisfaction, a shift toward active learning pedagogies, and the emergence of a strong collaborative teaching community. This paper examines the effects of the reform on student retention. Since the curricular reform involved pruning some content and altering course outcomes, which could conceivably have negative downstream impacts, we report on …

An Assessment Framework For First-Year Introduction To Engineering Courses, Senay Purzer, Kerrie A. Douglas, Jill A. Folkerts, Taylor V. Williams

School of Engineering Education Faculty Publications

In this evidence-based practice paper, we describe an assessment framework that applies to first-year introductory engineering courses. First-year engineering courses cover a variety of learning objectives that address both technical and professional outcomes outlined in ABET. These courses also often involve open-ended design and modeling projects. The assessment of multiple competencies along with open-ended design can be a challenging task for educators. In this paper, we describe a framework that guides instructional processes for effective assessment for student learning. This assessment-centered teaching and learning framework helps connect specific learning objectives to broader learning goals or competencies and on-going formative feedback …

Board # 102 : Pecase: Implementing K-12 Engineering Standards Through Stem Integration - An Executive Summary Of The Products And Research, Tamara Moore, Kristina Tank, Aran Glancy, Elizabeth Gajdzik

School of Engineering Education Faculty Publications

This executive summary of the grant, PECASE: Implementing K-12 Engineering Standards through STEM Integration, comes at the conclusion of the project. The purpose of the grant was to develop a definition and explore the practice of engineering in K-12 STEM classrooms. The definition was then used to assess curricula, policy documents, teacher practice, and student learning. Through this work, the definition was then used to help with the framing and development of curricula for K-5 classrooms. The resulting curricula are called the PictureSTEM units. These instructional units for K-5 classrooms utilize engineering design and picture books to teach young students …

A Content Analysis Of How Engineering Is Assessed In Published Curricula, Kerrie A. Douglas, Tamara J. Moore, Hillary Merzdorf, Tingxuan Lee, Amanda C. Johnston

School of Engineering Education Faculty Publications

A Content Analysis of How Engineering is Assessed in Published Curricula (Fundamental)

The purpose of this proposal is to present research findings concerning how and what about engineering is commonly assessed in well-known engineering or integrated STEM published curriculum. Two of the major shifts brought about by Next Generation Science Standards (NGSS) are an increased emphasis in students’ capabilities to perform higher-level reasoning skills and integrate content understanding into science practices. At the same time, NGSS has made engineering integration into science education a priority, and it is an exciting time of reform as schools are exploring curriculum resources and …

A Cross-Sectional Study Of Engineering Identity During Undergraduate Education, Allison Godwin, Walter C. Lee

School of Engineering Education Faculty Publications

This research paper explores students’ engineering, mathematics, and physics identities across the four years of undergraduate engineering education. The focus of this work are subject-related role identities, or how students position themselves and are positioned by others as the kind of people that engage in engineering, mathematics, or physics. An identity as an engineer is a role identity because it embodies a specific character that an individual plays within a social sphere. In this case, the social sphere is in the process of becoming an engineer. Other research has focused on identity development of engineering students, often either early in …

A Learning Trajectory For Developing Computational Thinking And Programming, Sean B. Brophy, Tony A. Lowe

School of Engineering Education Faculty Publications

A learning trajectory for developing computational thinking and programming This research study identifies the relationship between students’ prior experiences with programming and their development of computational thinking and programming during their first year engineering experience. Many first year programs teach students basic programming constructs using languages like MATLAB or LABView. The reason for this is because the disciplinary schools expect students to transform the constitutive properties that model a system’s behavior into a computer model they can use to analyze a system’s performance. Some undergraduate engineering students are entering college with strong computational backgrounds, while others are not. Peer learning …

Approaches To Coaching Students In Design Reviews, Robin Adams, Tiago R. Forin, Cole H. Joslyn

School of Engineering Education Faculty Publications

Design reviews offer a unique window into understanding how design teachers help their students develop as designers. They are a prevalent practice for helping students develop design thinking expertise, although their structure and content may vary across disciplines. Understanding the teaching that occurs during design reviews can illuminate the ways teachers support students in becoming design thinkers. In this paper, we extend prior work to illustrate disciplinary perspectives of how design teachers help their students develop as design thinkers. The guiding framework is design pedagogical knowledge (PCK), the content-specific and practice-based specialized knowledge of teaching design. We analyzed five sets …

Board # 114 : Progress Toward Optimizing Student Team Skill Development Using Evidence-Based Strategies, Matthew W. Ohland, Daniel M. Ferguson, Misty L. Loughry, David Jonathan Woehr

School of Engineering Education Faculty Publications

The broad goal of this work is to study the effectiveness of various teamwork training interventions. This research requires the use of a common model of teamwork and a system for training, collecting ratings data, and providing feedback. We will leverage the NSF’s prior investment in the CATME system, which meets the research criteria and automates some of the data collection and feedback, which will aid in executing the research protocol consistently. Seven empirical studies will determine the effect sizes of training, practice in teams, practice rating, and feedback interventions on cognitive development (improvement of team skills) and metacognitive development …

A Systematized Literature Review: Defining And Developing Engineering Competencies, Hossein Ebrahiminejad

School of Engineering Education Graduate Student Series

Essential competencies have been identified for engineers working in industry. These competencies include (but are not limited to) critical thinking, problem-solving, teamwork, and communication. Engineering education research has shown, however, that engineering undergraduate students often fail to develop these crucial competencies. The industry has also noted that recent graduates exhibit competency gaps. To address these gaps, it is important for higher education institutions to seek to understand the competencies identified as necessary in the industry. Moreover, one could argue educational institutions should develop and assess students’ competencies based on these professional demands. This research systematically reviews literature related to this …

Board # 113 : Eegrc Poster: Characterizing Trade-Off Decisions In Student Designers, Molly Goldstein

School of Engineering Education Graduate Student Series

Although design and decision-making are intertwined for practicing engineers, students from elementary school through college and graduate schools are not taught to think through uncertain situations (Howard, 2007) in which information is limited or outcomes are not guaranteed. Trade-offs are a complex element of decision, as the decision-making weighs possible outcomes against their respective costs (Otto &Antonsson, 1991). Although much is understood about how professional designers’ behaviors as compared to novice designers and students (Atmen et al., 2007; Crismond & Adams, 2012; Cross, 2003), there is little research regarding making trade-off decisions from middle school and high school to college. …

Ten Years Later: Where Are They Now?, Janet Callahan, Donna C. Llewellyn, Vicki Stieha, Ann E. Delaney

Materials Science and Engineering Faculty Publications and Presentations

This paper explores the educational and career trajectories of the alumnae of an outreach activity for girls. The outreach activity was originally developed using an integrated marketing approach to attract girls into engineering programs.¹ The program, a two day, overnight experience for rising 9^th, 10^th and 11^th grade girls, focuses on showcasing engineering as an exciting, creative activity, including activities developed from that perspective. Started in 2005 and held annually since then, a total of over 500 girls have participated, with approximately 85% of them coming from Boise State University’s immediate metropolitan area. Facilitated by …

Higher Education Capacity Building In Water Resources Engineering And Management To Support Achieving The Sustainable Development Goal For Water In Pakistan, Steven J. Burian, Mercedes Ward, Tariq Banuri, M. Aslam Chaudhry, Sajjad Ahmad, Bakhshal Lashari, Rasool Bux Mahar, Davey Stevenson, Jim Vanderslice, Kamran Ansari, Munir Babar, Abdul Latif Qureshi

Civil and Environmental Engineering and Construction Faculty Research

Achieving the Sustainable Development Goals requires a multi‐pronged approach, with a key element being the development of a trained Community of Practice to sustain the advances in the relevant sectors. The engagement of higher education as a catalyst in the development and capacity building of the next generation of professionals and citizens comprising the Community of Practice is essential to meet the challenges of poverty, climate change, and clean water and to sustain those advances past 2030. This paper describes a capacity building program funded by the United States Agency for International Development to partner the University of Utah, in …

Preliminary Findings Using Growth Mindset And Belonging Interventions In A Freshman Engineering Class, Jinny Rhee, Camille Johnson, Clifton Oyamot

Faculty Publications, Mechanical Engineering

Engineering is typically plagued with lower graduation rates and larger achievement gaps compared to other majors; the projected demand for its future graduates lends to the urgency in reversing these trends. Holding a growth mindset, or a belief that intelligence is mutable, and a feeling of belongingness are keys to persisting in and graduating from college. In prior research, improvements in retention and graduation rates have been found following minor interventions, particularly among some underrepresented populations of students. The current study explored whether similar interventions could be effective in increasing retention and graduation rates among underrepresented populations of engineering and …

Flipping Stem Classrooms Collaboratively Across Campuses In California, Laura Sullivan-Green, Ravisha Mathur, Andrew Feinstein

Office of the Provost Scholarship

San José State University, in partnership with California State University-Los Angeles and Cal Poly Pomona, was awarded a prestigious 2015 First in the World grant, sponsored by the Department of Education. The multi-campus effort is focused on bringing the flipped classroom model to seven STEM gateway courses over three years that have high failure rates through collaborative efforts from faculty on the three partner campuses. SJSU, CSULA, and CPP are all designated Hispanic-Serving Institutions and Minority-Serving Institutions, though their demographics are very different. High impact practices like the flipped classroom approach have been shown to increase URM student success and …

Collaborative Research: Ehr Core: Exploring The Emotional And Motivational Lives Of Undergraduate Engineering Students, Idalis Villanueva

Funded Research Records

No abstract provided.