Engineering Education Commons^™

Virginia Technology And Engineering Education Association 1978-2018: Celebrating Six Decades Of Progress, Ron Vickers, Philip A. Reed, George R. Willcox

STEMPS Faculty Publications

(First Paragraph) Technology and engineering education in Virginia and the nation is coming to a crossroads. Recent growth in state directives, new courses, and ever-changing funding for science, technology, engineering, and mathematics (STEM) education influences the supply of Technology Education teachers, leading to what some say is a dire future for our profession and association. This history is gathered to emphasize the importance and value of what we teach in Virginia public schools. It also captures who was involved with the association leadership over the years.

Effects Of Light Reflection On Spatial Visualization Ability And Implications For Engineering Technology Students, Petros Katsioloudis, Mildred Jones

STEMPS Faculty Publications

Results from a number of studies indicate that the type of light generated by the reflection on the surface of different types of surfaces can influence the spatial visualization ability; however, research provides inconsistent results. Considering this, a quasi-experimental study was conducted to identify the existence of statistically significant effects on spatial visualization ability as measured by the Mental Cutting Test and Sectional View drawing ability due to the impacts of light reflection. In particular, the study compared three types of light reflection; mirror, specular and diffuse and whether a significant difference exists among engineering technology students. According to the …

Collaborated Efforts In Ti Arm M4/32bits Microcontroller Curricula Developments And Assessments, Steve C. Hsiung, Feng Jao, Lijian Xu, Marjaneh Issapour

Engineering Technology Faculty Publications

The disappearing and lack technical supports in hardware and software of 68XXX and 80XXX microcontrollers have made the finding of the replacement an urgent issue in the academic communities. There are many new comers such as Microchip PIC, Arduino ATMEL, and Texas Instruments ARM M series to choose from, but obstacles and learning curve for the faculty to adopt the new environment with these new microcontrollers have issues to slow the process. There were efforts made with grant supports to disseminate the curricula development on PIC and Arduino microcontrollers. But, industries have suggested and expressed the needs and desire of …

Celebrating 20 Years Of The Exceed Teaching Workshop, Allen C. Estes, Stephen J. Ressler P.E., Camilla M. Saviz P.E., Brock E. Barry, Carol L. Considine, Dion Coward, Norman D. Dennis Jr., P.E., Scott R. Hamilton P.E., David S. Hurwitz, Tanya Kunberger P.E., Thomas A. Lenox, Tonya Lynn Nilsson, Leslie Nolen Cae, James J. O'Brien Jr., Robert James O'Neill, David A. Saftner, Kelly Salyards P.E., Ronald W. Welch P. E.

Engineering Technology Faculty Publications

In response to the clear need for faculty training, the American Society of Civil Engineers (ASCE) developed and funded Project ExCEEd (Excellence in Civil Engineering Education) which is celebrating its twentieth year of existence. For the past two decades, 38 ExCEEd Teaching Workshops (ETW) have been held at six different universities. The program has 910 graduates from over 267 different U.S. and international colleges and universities. The ExCEEd effort has transformed from one that relied on the grass roots support of its participants to one that is supported and embraced by department heads and deans. This paper summarizes the history …

A Comparison Of Traditional And Adaptive Comparative Judgment Assessment Techniques For Freshmen Engineering Design Projects, Scott R. Bartholomew, Greg J. Strimel, Andrew Jackson

Faculty Publications

This article examines the use of an alternative form of assessment for engineering design projects called adaptive comparative judgment (ACJ). The researchers employed an ACJ tool to evaluate undergraduate engineering student design projects in an effort to examine its’ reliability, validity, and utility in comparison with traditional assessment techniques. The ACJ process employed multiple judges to compare the design artifacts of 16 first-year engineering majors. The authors conducted an analysis of the reliability and validity of the ACJ method compared to the traditional rubric used to evaluate the project and the performance data of each student’s design prototype. For these …

Infographic : Engineers And Athletes: Career Opportunities And Average Earnings, Mckenna James, Leroy Long Iii

Publications

In this infographic, the average earnings for athletes and engineers are displayed. For a variety of sports, the average yearly salary, average career length, and average career earnings are collected. In a similar way, the average mid-career salary and average career earnings are shown for multiple engineering disciplines. In addition, a series of facts show the professional opportunities for engineers and athletes. Based on this infographic, engineering is a more viable career choice and competes with the career earnings of professional athletes. This infographic is not meant to discourage playing sports, but to encourage youth and young adults to view …

Engineering Vs. Engineering Technology: Toward Understanding The Factors Infuencing The Academic And Career Pathways Of African American Students, Lesley M. Berhan, Anne M. Lucietto

School of Engineering Technology Faculty Publications

In our preliminary study we conducted an online survey of students enrolled in four year engineering technology programs. The main objective of the survey was to gain insight into the students’ high school preparation, path to major, curriculum and institution, and future plans. The data was analyzed and summarized using descriptive statistics and other qualitative methods such as content analysis. We report on the results of the survey and outline how these results will inform the next phase of the research.

Manufacturing Applications Of The One-Dimensional Cutting Stock Problem As A Team Project, Hüseyin Sarper, Nebojsa I. Jaksic

Electrical & Computer Engineering Faculty Publications

This paper explains the beneficial and practical impact of operations research in two real manufacturing settings. Two manufacturing examples used in student projects were (1) cutting rails (80‘ or 40‘) to manufacture railroad frogs of many sizes and (2) cutting round metal rolls (12‘ to 20‘) to meet customer demands for various lengths of cuts. Student teams in Engineering of Manufacturing Processes and Operations Research courses wrote computer programs. The program first identified all possible patterns that can be cut out of a given stock length. Next, the program created a mathematical model (a text file) as an output. This …

Entrepreneurial Mindset: Integrating Creative Thinking And Innovation Into A Graphical Communications Course, Leroy Long Iii, Lulu Sun

Publications

Nationwide, leaders in business and industry have increasingly acknowledged the importance of entre¬preneurship. Several areas of the country showcase the importance of entrepreneurship such as Silicon Valley in California where a large number of start-up companies in science, technology, engineering and math (STEM) fields are located. To meet the needs of business and industry, institutions of higher educa¬tion prepare students for future employment by offering rigorous and relevant coursework in areas such as entrepreneurship. Collegiate faculty and staff can use fundamental engineering courses to instill an en¬trepreneurial mindset – a set of beliefs, attitudes, and behaviors that drive innovation – …

Infographic: Institutional Barriers To Black And Latino Male Collegians’ Success In Engineering And Related Stem Fields, Leroy L. Long Iii, William Wanyagah

Publications

Infographic was created to support the article Institutional Barriers to Black and Latino Male Collegian's Success in Engineering and Related Stem Fields, which can be read here:

Examining Engineering Design Cognition With Respect To Student Experience And Performance, Greg J. Strimel, Eunhye Kim, Scott R. Bartholomew, Diana V. Cantu

Faculty Publications

This study investigated the design cognition and performance results of secondary and post-secondary engineering students while engaged in an engineering design task. Relationships between prototype performance and design cognition were highlighted to investigate potential links between cognitive processes and success on engineering design problems. Concurrent think-aloud protocols were collected from eight secondary and 12 post-secondary engineering students working individually to design, make, and evaluate a solution prototype to an engineering design task. The collected protocols were segmented and coded using a pre-established coding scheme. The results were then analyzed to compare the two participant groups and determine the relationships between …

Adaptive Comparative Judgment For Polytechnic Transformation: Assessment Across The Curriculum, Scott R. Bartholomew, P. E. Connolly

Faculty Publications

The authors are investigating potential applications of adaptive comparative judgment (ACJ) across numerous environments and learning scenarios within the Purdue Polytechnic Institute as part of Purdue’s efforts to transform the undergraduate learning experience. Six courses or program areas were selected for the study, involving a wide variation in subjects, subject matter, and assessment artifacts. The authors anticipate that positive results from these pilot studies will encourage broader and deeper applications of ACJ in the Purdue Polytechnic, across Purdue University, and in other academic institutions. Results from these scenarios will be disseminated in future conferences and scholarly journals.

Kinesthetic Learning Experience Simulation Using An Online Intervention To Improve Hands-On Ability, David Leach

Dissertations, Master's Theses and Master's Reports

Students enrolled in mechanical and manufacturing engineering programs employ differing levels of mechanical aptitude and practical hands-on ability. Many students lack practical experience tinkering with mechanical devices and mechanisms prior to entering their post-secondary years. Student attention spans in traditional classroom environments appear to be decreasing with the ever-increasing addiction to immediate gratification provided by electronic devices, gaming software, and social media platforms. The question is then raised whether or not modern engineering students have the ability to improve mechanical aptitude by simulating a kinesthetic or tactile learning experience through an online tutorial. This project describes the development and testing …

Exploring How Reflective Exercises Affect First-Year Engineering Epistemological And Intelligence Beliefs, Amber J. Kemppainen

Dissertations, Master's Theses and Master's Reports

This work explores the effects of the implementation of a KWL reflective learning exercise on first-year engineering students’ self-efficacy, intelligence beliefs (mindset), and epistemological beliefs. A sample of 428 first-year engineering students were divided into three groups: a) control, b) exposure to KWL, and c) used KWL. Significant differences were found in self-efficacy between the groups with more efficacious students being less likely to utilize the KWL activity. Seventy-seven percent of the students who used the KWL activities reported positive learning outcomes by using the KWL activity to focus their class preparation or to reflect on their learning. No significant …

The Design And Implementation Of An Educational Multimedia Interactive Operation System Using Lectora Inspire, Setya Chendra Wibawa

Elinvo (Electronics, Informatics, and Vocational Education)

The objective this research to produce a valid interactive learning tool and practice based on learning media Lectora Inspire; knowing the student response against the learning tool, and knowing the student learning outcomes after using Lectora inspire learning media. Research and development of the research method using ADDIE model. Research with the learning media to be tested against the 32 student X level of Vocational High School and the subject is operation system. Research analysis results obtained through student response and question form reserved post-test. Validation of results obtained through validation by the validator which consists of one lecturer of …

Sistem Tekanan Mekanik Berbasis Mikrokontroler At-Mega 16 Untuk Pembuatan Kerupuk Pelompong Guna Menunjang Produksi Home Industry Barokah Di Tuban Jawa Timur, Adibatul Ardianto

Elinvo (Electronics, Informatics, and Vocational Education)

Tujuan pembuatan alat ini adalah untuk mendapatkan rancang bangun hardware, program perangkat lunak dan unjuk kerja Sistem tekanan mekanik berbasis mikrokontroler AT-Mega 16 untuk pembuat kerupuk pelompong guna menunjang proses produksi home Industry Barokah di Tuban Jawa Timur.Pembuatan sistem tekanan mekanik berbasis mikrokontroler AT-Mega 16 terdiri dari beberapa tahapan yaitu identifikasi kebutuhan, analisa kebutuhan, blok diagram sistem, perancangan sistem, langkah pembuatan alat, diagram alir program, pengujian alat dan pengambilan data. Pembuatan frame menggunakan besi jenis tabung, siku dan kanal C. Alat ini menggunakan komponen sistem minimum Atmega16, driver motor BTS7960 sebagai pengatur putaran dan kecepatan motor, dongkrak mekanik yang sudah …

Trainer Pid Controller Sebagai Media Pembelajaran Praktik Sistem Kendali, Eko Marpanaji

Elinvo (Electronics, Informatics, and Vocational Education)

Penelitian ini bertujuan untuk mengembangkan trainer PID controller dan menilai kelayakan trainer PID Controller. Trainer yang dikembangkan menggunakan aplikasi PID controller yaitu pengendali dual brushless. Penelitian ini merupakan penelitian R&D yang berorientasi produk berupa trainer dan modul pendamping. Setelah produk mendapat validasi dari ahli melalui uji alfa dan uji beta maka produk dievaluasi pada implementasi sesungguhnya. Pengembangan media merujuk pada model Lee & Owens. Penelitian ini menggunakan model pengembangan yang meliputi analisis, desain, implementasi dan evaluasi, dimana letak evaluasi dan revisi terletak pada tiap tahapan. Evaluasi dilakukan oleh ahli materi, ahli media dan pengguna. Pengambilan data menggunakan angket yang …

Rancang Bangun Alat Deteksi Suara Paru-Paru Untuk Menganalisa Kelainan Paru-Paru Berbasis Android, Dodik Kurniawan

Elinvo (Electronics, Informatics, and Vocational Education)

Sistem rancang bangun alat deketsi suara paru-paru berbasis android merupakan pengembangan dari teknik auskultasi yang didukung dengan tampilan sinyal di android untuk mempermudah dokter dalam menganalisa kelainan paru-paru pasien. Perancangan alat terdiri dari stetoskop sebagai pendeteksian awal, kemudian dikuatkan dengan rangkaian pre-amp mic-condenser, low pass filter, high pass filter, notch filter dan output dari ragkaian berkomunikasi serial antar bluetooth untuk menampilkan signal dalam smartphone. Dari hasil pengujian alat deteksi suara paru-paru, untuk rangkaian low pass filter orde 4 frekuensi cutoff 1000 Hz terjadi pemotongan pada frekuensi 900 Hz yaitu (0,56667±0,01155), rangkaian high pass filter orde 4 frekuensi cutoff …

The Future Of Nuclear Security: A Medical Physicist’S Perspective, Katharine E. Thomson

International Journal of Nuclear Security

Planning for the future of nuclear security is a vital and complex task, requiring cooperation and contribution from many disciplines and industries. This diversity of expertise should include the medical sector, which faces many of the same challenges as the nuclear industry: controlling access to dangerous material, creating a strong security culture, cooperating with the wider world and engaging the public.

Medical physicists, of which the author is one, oversee all aspects of small-scale radiation use. This paper discusses three key areas increasingly important to both medical and nuclear uses of radioactive materials: public engagement, prevention of nuclear and radiological …

The Future Of Nuclear Security In Moroccan Territory After The Creation Of The New Moroccan Agency Of Nuclear And Radiological Safety And Security: Opportunities And Challenges, Amal Touarsi, Amina Kharchaf

International Journal of Nuclear Security

Nowadays, a security regime for protecting nuclear and radiological material—providing an intelligent national regulatory institution and establishing national security laws—is necessary in order for a state to ensure security of nuclear and radiological materials used within its borders.

This paper focuses on discussing the opportunities and challenges facing the future of nuclear security after the creation of the new Moroccan Agency of Nuclear and Radiological Safety and Security.

Assessing And Enhancing Nuclear Safety And Security Culture For Small Facilities That Handle Radioactive Material, Solymosi Máté

International Journal of Nuclear Security

The use of radioactive sources is expanding all over the world and abreast the necessity of the enhancement of its safe and secure application is increasing too. In the nuclear industry, the safety and security are top priorities since decades. They share the same goal, to protect humans from the negative affect of the ionizing radiation. The human component of them is a significant factor and technical solutions can protect us so far and thus the culture for safety and security become a major focus. On the other hand, there are still some contradiction between recommendations and international guidance of …

Supporting Mechanistic Reasoning In Domain-Specific Contexts, Paul J. Weinberg

Journal of Pre-College Engineering Education Research (J-PEER)

Mechanistic reasoning is an epistemic practice central within science, technology, engineering, and mathematics disciplines. Although there has been some work on mechanistic reasoning in the research literature and standards documents, much of this work targets domain-general characterizations of mechanistic reasoning; this study provides domain-specific illustrations of mechanistic reasoning. The data in this study comes from the Assessment of Mechanistic Reasoning Project (AMRP) (Weinberg, 2012), designed using item response theory modeling to diagnose individuals’ mechanistic reasoning about systems of levers. Such a characterization of mechanistic reasoning illuminates what is easy and difficult about this form of reasoning, within the subdomain of …

Garden Building Design Project, Gena Farley, Vanessa Villanueva, Jayanne Asuncion

Building Information Modeling Final Projects

Final project from the EMGT 193/293 Building Information Modeling (BIM) course in the School of Engineering and Computer Science as part of the Bachelor of Science in Engineering Management degree. A student group designed and modeled a one-story building to house the Pacific Garden Program on campus.

Robb Garden Building, Joseph Cliscagne, Joseph Prescott, Tamara Turton, Saima Uz-Zaman

Building Information Modeling Final Projects

Final project from the EMGT 193/293 Building Information Modeling (BIM) course in the School of Engineering and Computer Science as part of the Bachelor of Science in Engineering Management degree. A student group designed and modeled a one-story building to house the Pacific Garden Program on campus.

Robb Garden Building: Revit Up, Gimelle Jacala, Colin Strong, Jason Wu

Building Information Modeling Final Projects

Final project from the EMGT 193/293 Building Information Modeling (BIM) course in the School of Engineering and Computer Science as part of the Bachelor of Science in Engineering Management degree. A student group designed and modeled a one-story building to house the Pacific Garden Program on campus.

Into The Deep: The Role Of Paradigms In Understanding Engineering Education For Sustainable Development, Iacovos Nicolaou, Eddie Conlon, Brian Bowe

Articles

This article presents summary findings of a mixed methods research project exploring the provision of education for sustainable development (SD) in seven Irish engineering degree programmes. Drawing on Sterling’s (2004) iceberg metaphor and Critical Realism it seeks to identify the underlying socio-cultural barriers preventing a holistic integration of SD in engineering education. It argues that the current focus is predominantly on the environmental dimension of SD and that there are a set of reinforcing mechanisms facilitating the provision of disciplinary education aimed at producing technically proficient, employable graduates in which the social dimension of SD is marginalised. This is underwritten …

Robb Garden Community Resource Center, Jackie Koyama, Daryll Mendoza, Kourtnie Sicam

Building Information Modeling Final Projects

Final project from the EMGT 193/293 Building Information Modeling (BIM) course in the School of Engineering and Computer Science as part of the Bachelor of Science in Engineering Management degree. A student group designed and modeled a one-story building to house the Pacific Garden Program on campus.

Operation Bim: Robb Garden Building Project, Michael White, Daniel Seif, Suman Bhardwaj

Building Information Modeling Final Projects

Final project from the EMGT 193/293 Building Information Modeling (BIM) course in the School of Engineering and Computer Science as part of the Bachelor of Science in Engineering Management degree. A student group designed and modeled a one-story building to house the Pacific Garden Program on campus.

Robb Garden Building, Staysha Delgado, Lillian Sam, Ryan Teixeira, Courtney Vierra

Building Information Modeling Final Projects

Final project from the EMGT 193/293 Building Information Modeling (BIM) course in the School of Engineering and Computer Science as part of the Bachelor of Science in Engineering Management degree. A student group designed and modeled a one-story building to house the Pacific Garden Program on campus.

Ole Miss Engineer 2017-2018

Ole Miss Engineer

No abstract provided.