Engineering Education Commons^™

Bluetooth Tracking Approach For User Assistance Based In Sequential Patterns Analysis., Aitor Arribas Velasco, John Mcgrory, Damon Berry

Conference Papers

As a civilization, we are drowning in a raging torrent of data, of our own making, that is being harvested by our collective technologies and systems (e.g. Fitbit, phones). However, data itself is of no utility unless it is converted into beneficial knowledge. Design patterns have been shown to be a pragmatic solution to control and manage information flows and provide order and mean-ing to data within a given context. Assisting users within their daily activities has become a key aspect for modern Artificial Intelligence Systems. Neverthe-less, although the GPS technologies work well for outside location, indoor posi-tioning is still …

Business In Engineering Education: Issues, Identities, Hybrids, And Limits, Mike Murphy, Pat O'Donnell, John Jameson

Books/Book chapters

This chapter explores how engineering students are broadened in their education through the teaching of non-engineering subjects, such as business subjects, in order to develop critical thinking skills and self-knowledge of what it means to be an engineer. The goal of the chapter is to provide a commentary on the level of interaction, from design of courses to design of curricula, between business faculty and engineering faculty, and the results of that interaction. This chapter sets out to (i) explore whether there appears to be a place in engineering education curricula for reflective critique of assumptions related to business thinking, …

International Observations: United Nations Sustainable Development Goals (Sdgs) And Digitalisation, Mike Murphy

Presentations

•Superficial thoughts on SDGs and Digitalisation •International Observations: –Skills and competences –Networking •Including a word about the EU –Broadening the Curriculum

Matlab Gui Based Educational Simulation Tool Box For Power Analysis, Tharuka Senevirathne

All Graduate Theses, Dissertations, and Other Capstone Projects

One of the most important and complex tasks in power engineering is the analysis of power systems under fault conditions. The detection and analysis of these faults are important to guarantee that the dependability and stability of the power system does not decline as a result of a critical event such as a fault. This thesis will conduct research on how a power system under fault conditions behaves and will examine the various scenarios of faults such as three-phase, single line-to-ground, line-to-line, and double line-to-ground faults. A simplified method based on symmetrical components is used to construct the mathematical models …

Scaffolding Project-Based Learning In An Engineering And Education Partnership Using Open-Access Technology, Pilar Pazos, Stacie I. Ringleb, Jennifer Kidd, Rachel Jones

Engineering Management & Systems Engineering Faculty Publications

This paper describes the use of a freely-accessible open-source platform based on Google Apps for Education that combines Google Sites, Google Docs, Google Drive, Google Hangouts and script language in a custom-based interface that supports collaborative service-learning projects for teams of Engineering and Education students. The approach discussed in this paper was successful in promoting collaboration among students from two different disciplines working remotely. The analysis suggests that balanced participation in the team, presence of shared goals and clear roles that emphasized individual and collective responsibilities were key to a successful interdisciplinary project experience. While many students still reported struggling …

An Interdisciplinary Research-Based Education Program For Engaging Plant/Agriculture Sciences, Chemical Sciences, And Engineering Students (Irep-4-Pace) At Minority Institutions, Sharanabasaweshwara Asundi, Gregory C. Bernard, Willard E. Collier

Mechanical & Aerospace Engineering Faculty Publications

An interdisciplinary Research-based Education Program for Engaging Plant/Agriculture sciences, Chemical sciences and Engineering students (iREP-4-PACE) is envisioned with the underlying intent to improve Tuskegee University's (TU’s) STEM retention through the introduction of interdisciplinary, guided, inquiry experiments focused on the production of high-value chemicals from plants. At large, chemicals are synthesized from petroleum resources and it is well established that the continued extraction of these resources is detrimental to the environment. On the contrary, synthesizing chemicals from "plant factories" may be a boon to the environment and have a negative carbon …

Prisoners Of The Capitalist Machine: Captivity And The Corporate Engineer, Eddie Conlon

Books/Book chapters

This chapter will focus on how engineering practice is conditioned by an economic system which promotes production for profit and economic growth as an end in itself. As such it will focus on the notion of the captivity of engineering which emanates from features of the economic system. By drawing on Critical Realism and a Marxist literature, and by focusing on the issues of safety and sustainability (in particular the issue of climate change), it will examine the extent to which disasters and workplace accidents result from the economic imperative for profitable production and how efforts by engineers to address …

The Autodrive Challenge: Autonomous Vehicles Education And Training Issues, Diane Peters, Jennifer Bastiaan, Juan R. Pimentel, Mehrdad Zadeh

Mechanical Engineering Presentations And Conference Materials

Automotive companies are focusing significant research and development efforts on autonomous vehicles. As they do so, they recognize the need for a large, well-trained workforce that is equipped to conduct these research and development projects, particularly in light of the projected shortages of STEM professionals in the United States. Some of these companies have found various ways to engage with professional societies and with universities to encourage the development of this workforce, and to promote themselves to STEM students while they are still in school. One such effort is the SAE / GM AutoDrive ChallengeTM, a new collegiate competition organized …

What Is A Bim Design Model?, James Peters, Malachy Mathews

Conference papers

The recent report into Building Information Management or BIM, by construction law experts May Winfield and Sarah Rock entitled “Winfield Rock Report” [1] gives reason to state that the UK architectural, engineering and construction industry or AEC, is hindered by the absence of a clear definition of Level 2 BIM. The ISO 19650-2 standard published in 2019, is based upon PAS1192-2:2013. The intent of ISO 19650-2 is to provide a road map to facilitate the standardisation of BIM process in a uniformed fashion. A key pillar of ISO 19650 is the “information cycle” and central to this is a federated …

Adapting The Surveying Curriculum To New Dimensions Of The Profession, Fahria Masum, Reinfried Mansberger, Audrey Martin, Gerhard Navratil, Anthony Mushinge

Articles

Today the surveying profession is very different from what it was twenty years ago. Recent technological innovations, globalization, and global land-related challenges have allowed a wide range of advances in the surveying profession. The vision is to promote surveying practices that can enhance the quality of services in a variety of tracks in the land profession. According to the new adjacent professional areas and the needs of the labor market, academic courses for surveyors have to be adapted to meet the broader scope of the surveying profession and to supply highly qualified land professionals. This paper outlines the new challenges …

Teaching Technical Communication To Engineering Students: Design, Implementation, And Assessment For Project-Based Instruction, Yang Gao

Proceedings of the Interdisciplinary STEM Teaching & Learning Conference (Archived)

Through the project-based instruction (PBI) method, this paper described the design, implementation, and assessment of a technical communication course for engineering graduate students. The paper first addressed an increasing demand of engineering students with great communication skills through analyzing the existing literature and industry criteria. It then introduced concepts and characteristics of PBI and explained why PBI is a fit pedagogy in teaching technical writing to engineering students. Next, it elaborated components involved in the holistic design of the PBI course, including student sample, timeline, designed sections and units, and designing rationale and principles. This paper then reported the teaching …

Global Aviation System: Towards Sustainable Development, Marina P. Bonser Dr.

International Journal of Aviation, Aeronautics, and Aerospace

Aviation around the world has integrated into a global system. As the integration process continues, more aspects and levels of it need to be lead towards the sustainable development of the whole system via advancing strategic management, global communication proficiency, and technological expertise. It becomes essential to enrich global language (English) proficiency with cross-cultural communication competence not only for communication in the air but also for airport security, passenger and cargo services, aircraft and equipage engineering, building, and maintenance. Nowadays lower levels of management need more advanced strategic thinking and problem solving skills, and higher levels of management need global …

Doctoral Engineering Grant Writing Experience To Prepare Future Professionals And Faculty, Katherine Smith, Nathapon Siangchokyoo, Erika Gamarra, Ashish Tamhane, Anthony W. Dean

Engineering Technology Faculty Publications

While there have been many efforts to broaden opportunities for all STEM students by engaging in interdisciplinary endeavors and education focusing on professional development, there are particular problems facing students pursuing doctoral degrees in engineering disciplines. Doctoral programs of the future need to become better equipped to prepare students for future careers as engineering professionals or faculty. It has been noted recently that many doctoral degree recipients are turning to jobs outside of academia but increases in undergraduate enrollment and the average age of the professoriate indicate an increase in demand for new faculty. Both future faculty and professionals can …

Topic Development In The Freshman Engineering Paper: Finding A Focus, Edward J. Eckel

University Libraries Faculty & Staff Publications

Topic development and focus are relatively neglected areas of the student research process. This study examined how students in a freshman engineering writing class developed initial research paper topics into focused thesis statements. A mixed methods approach was used, incorporating online surveys, qualitative interviews, and a rubric to track topic development and assess thesis statement focus. The survey results and student comments indicated that participants were more competent at the mechanics of finding sources and writing than at developing appropriately scoped thesis statements. Closer collaboration between writing instructors and librarians is urged to more effectively support and scaffold topic development.

Analysis Of Blended And Multi-Modal Instruction And Its Effects On Spatial Visualization Ability, Diana Bairaktarova, Daron Williams, Petros Katsioloudis

STEMPS Faculty Publications

For the last decade, remedial spatial visualization training has been offered to first-year engineering students in traditional classroom settings where students attend class and interact face-to-face with an instructor and peers. An alternative to the traditional pedagogical approach is a multi-modal blended learning format that combines in-class instruction with videos that can be viewed at the student’s convenience. The new setting affords students the opportunity to repeatedly revisit the basic instruction at the time and place of their choosing. This case study investigated student outcomes in a blended multi-modal Introduction to Spatial Visualization course that integrated video lectures; free-hand sketching …

Using Active Learning And The Wright State Model For Engineering Mathematics Education To Cultivate Academic Success Among First-Year Engineering Students, Leroy Long Iii

Publications

A mid-sized private university in the Southeast has created an experimental first-year engineering course based on the Wright State Model for Engineering Mathematics Education. The course aims to increase student retention, motivation, and success in engineering through an application-oriented, hands-on introduction to engineering mathematics. Therefore, active learning techniques were used throughout the course. Students provided preliminary qualitative data via end-of-course evaluations. Preliminary quantitative data included student course grades, cumulative GPAs (CGPAs), and retention rates. Thus far, students taking the experimental firstyear engineering course believe they gain confidence and skills such as problem-solving, time management, study habits, computer programming, as well …

Exposing Students To Stem Careers Through Hands-On Activities With Drones And Robots, Vukica M. Jovanović, George Mcleod, Thomas E. Alberts, Cynthia Tomovic, Otilia Popescu, Tysha Batts, Ms. Mary Louise Sandy

Engineering Technology Faculty Publications

Autonomous robots have been used in a variety of ways from collecting specimen in hazardous environments to space exploration. These robots can be found in various manufacturing systems as Autonomous Guided Vehicles (AGVs) to transport parts and assemblies throughout the manufacturing system. They have also been used as a vehicle to convey design thinking and other STEM-related concepts in mechanical engineering/mechanical engineering technology, electrical engineering/electrical engineering technology, computer science, and computer engineering. Various outreach events have included robotics based activities that engage students in building and programming autonomous robots for the purpose of achieving a specific task. These events are …

Recognizing Engineering Students’ Funds Of Knowledge: Creating And Validating Survey Measures, Dina Verdín, Jessica M. Smith, Juan Lucena

School of Engineering Education Graduate Student Series

This research base paper examines students who are the first in their families to attend college. Our research seeks to understand the role students’ funds of knowledge makes in first-generation college students’ undergraduate experience. Funds of knowledge are the set of formal/informal knowledge and skills that students learn through family, friends, and communities outside of academic institutions. This paper reports funds of knowledge themes relevant to first-generation college students in engineering and the process of gathering validity evidence to support the funds of knowledge themes.

Using ethnographic and interview data, six themes emerged: connecting experiences, community networks, tinkering knowledge, perspective …

Board 51: An Initial Step Towards Measuring First-Generation College Students’ Personal Agency: A Scale Validation, Dina Verdín, Allison Godwin

School of Engineering Education Graduate Student Series

This research paper describes the development of a scale to measure how first-generation college students use engineering as a tool for making a difference in their community and world or personal agency. Personal agency is a capability that every individual holds; it is described by Bandura as an individual’s beliefs about their capabilities to exercise control over events that affect their lives through purposeful and reflective actions. Agentic actions allow students to explore, maneuver and impact their environment for the achievement of a goal or set of goals. This study identifies how cognitive processes of forethought, intention, reactivity, and reflection …

Eager: Broadening Participation Of First-Generation College Student, Jessica M. Smith, Dina Verdín, Juan C. Lucena

School of Engineering Education Graduate Student Series

No abstract provided.

Curricular Optimization: Solving For The Optimal Student Success Pathway, William G. Thompson-Arjona

Theses and Dissertations--Electrical and Computer Engineering

Considering the significant investment of higher education made by students and their families, graduating in a timely manner is of the utmost importance. Delay attributed to drop out or the retaking of a course adds cost and negatively affects a student’s academic progression. Considering this, it becomes paramount for institutions to focus on student success in relation to term scheduling.

Often overlooked, complexity of a course schedule may be one of the most important factors in whether or not a student successfully completes his or her degree. More often than not students entering an institution as a first time full …

The Legacy Project: Rodney L. Custer, Dte, Rodney L. Custer Dte, Johnny J. Moye Dte

STEMPS Faculty Publications

An interview with vice president of Dept. of Technical Education, Rodney Custer is presented. Topics discussed include interest in technology and engineering education; academic qualification; and experience as university department chair administrator and working with the Center for Math, Science, and Technology (CeMast).

Motivation In Transition: Development And Roles Of Expectancy, Task Values, And Costs In Early College Engineering, Kristy A. Robinson, You-Kyung Lee, Emily A. Bovee, Tony Perez, S. Patrick Wilson, Daina Briedis, Lisa Linnenbrink-Garcia

STEMPS Faculty Publications

This longitudinal study investigated development in expectancy for success (perceived competence), 3 types of task value (utility, interest, attainment), and 3 types of perceived cost (opportunity, effort, psychological) for engineering students during their first 2 years of college. Latent growth curve models indicated declines in expectancy and values, with attainment value declining more slowly than expectancy, interest value, and utility value. Costs increased over time, with effort cost increasing more rapidly than psychological cost. Demographic differences were observed in initial levels of motivation, but not in rates of change over time. Students with slower declines in expectancy and value and …

Board 78: Establishing A Pathway To Completion For Pursuing Engineering And Engineering Technology Degrees Through A Scholarship Program At Old Dominion University, Vukica M. Jovanovic, Anthony W. Dean, Kim Bullington Sibson, Cynthia Tomovic, Rafael Landaeta

Engineering Technology Faculty Publications

There are various barriers facing adult students and veterans completing engineering degrees. Many of these student’s work part- or full-time while in college. In order to help these students, enable high retention rates, and decrease time to graduation require an in-depth understanding of specific student populations, especially ones classified as underrepresented. This paper provides an initial look into the first year of a scholarship program, funded by the National Science Foundation, and student success activities designed to support high-achieving, low-income students with demonstrated financial need pursuing bachelor's degrees in engineering and engineering technology. Support services and scholarships are for veterans …

Continued Efforts In Ti Arm M4 Microcontroller Curricula Developments And Assessments Between Three Different Institutions And Programs, Steve C. Hsiung, Lijian Xu, Feng Jao, Yonghui Wang, Suxia Cui

Engineering Technology Faculty Publications

This project is a continuation in efforts to upgrade the curricula in microcontroller related courses that are facing difficulties in the disappearing and lack technical supports in hardware and software of 68XXX and 80XXX microcontrollers. Through the study of a NSF supported project "Transform the Innovated Design and Development of an Embedded Design Training System and Associated Support Curricula into a Commercial Available Product" that interviewed 130 faculty/teachers/students across the U.S. has revealed on finding newly available microcontrollers is an urgent issue in the academic communities. Based on the supports on hardware and software and function libraries, the TI ARM …

Design A Portable Sensing Platform With A Lidar And Ti Arm M4 Controller, Bin Hu, Steve C. Hsiung, Matthew B. Kersey

Engineering Technology Faculty Publications

The Microcontrollers/microelectronics have been used in variety of engineering applications on complex and efficient operations. One of the challenges in applying existing microelectronic technologies to these engineering systems lies in the need of modular portability, scalability, customizability, and compatibility. This paper focuses on addressing such challenges by designing a portable sensing platform that integrates a Lidar with USB interface and TI ARM M4 microcontroller. This developed sensing system will serve as an effective teaching platform to create new or enhance existing microelectronic courses that allow students to gain hands-on experiences in mobile embedded system designs. Moreover, the customizability and portability …

Improving Stem Recruitment Through A Theme-Based Summer Residential Camp Focused On Sea Level Rise, Vukica M. Jovanović, Balša Terzić, Mujde Erten-Unal, Victoria Hill, George Mcleod, Michelle Covi, David Burdige, Jenifer Alonzo, Justin Mason, Tysha Batts, Cynthia Tomovic

Engineering Technology Faculty Publications

In this paper, the authors present an enrichment program that focuses on Science, Technology, Engineering, and Math (STEM) concepts. The program is named Building Leaders to Advance Science and Technology (BLAST) and is held each summer at three universities across the Commonwealth of Virginia: Old Dominion University, the University of Virginia, and the Virginia Polytechnic Institute. BLAST is sponsored in partnership among these three universities and the Virginia Space Grant Consortium (VSGC), and is funded by the General Assembly of Commonwealth of Virginia. Its main purpose is to expose high school students to topics related to different STEM fields through …

Aligning Best Practices In Student Success And Career Preparedness: An Exploratory Study To Establish Pathways To Stem Careers For Undergraduate Minority Students, Kimberly D. Kendricks, Anthony A. Arment, K. V. Nedunuri, Cadance A. Lowell

Journal of Research in Technical Careers

Undergraduate minority retention and graduation rates in STEM disciplines is a nationally recognized challenge for workforce growth and diversification. The Benjamin Banneker Scholars Program (BBSP) was a five-year undergraduate study developed to increase minority student retention and graduation rates at an HBCU. The program structure utilized a family model as a vehicle to orient students to the demands of college. Program activities integrated best K-12 practices and workforce skillsets to increase academic preparedness and career readiness. Findings revealed that a familial atmosphere improved academic performance, increased undergraduate research, and generated positive perceptions of faculty mentoring. Retention rates among BBSP participants …

Sustainability In Higher Education: Perceptions Of Social Responsibility Among University Students, Younghan Jung, Kayoung Park, Junyong Ahn

Engineering Technology Faculty Publications

Many construction-related training and education programs in the United States have now embraced the concept of sustainability, offering sustainable construction courses that highlight sustainable design and construction practices. These courses have mainly focused on green building strategies for the design and construction of built environments and indoor environmental quality necessary for students’ knowledge enhancement and career development. This study examined the effect of sustainability course on students’ knowledge as well as their perceptions of social responsibility and sustainable behaviors. Data were collected by conducting a survey from construction related programs in U.S. universities. Students were categorized based on their experience …

Board 141: Engineering Identity As A Predictor Of Undergraduate Students' Persistence In Engineering, Debra A. Major, Seterra D. Burleson, Xiaoxiao Hu, Kristi J. Shryock

Psychology Faculty Publications

Improving graduation rates of students who have selected and been admitted to engineering majors is a pivotal strategy in supporting national initiatives to increase the number of engineering graduates. Research suggests that the degree to which a student is attached to or belongs to engineering as a discipline better explains persistence-related outcomes than lack of interest and ability. As a result, identity frameworks have proven useful for furthering the understanding of engineering persistence. In this paper, we examine the relationship between undergraduate students’ engineering identity and persistence as an engineering major.

As part of an ongoing NSF IUSE project, a …