Systems and Communications Commons^™

Block Sparse Memory Improved Proportionate Affine Projection Sign Algorithm, J. Liu, S. L. Grant

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

A block sparse memory improved proportionate affine projection sign algorithm (BS-MIP-APSA) is proposed for block sparse system identification under impulsive noise. The new BS-MIP-APSA not only inherits the performance improvement for block-sparse system identification, but also achieves robustness to impulsive noise and the efficiency of the memory improved proportionate affine projection sign algorithm (MIP-APSA). Simulations indicate that it can provide both faster convergence rate and better tracking ability under impulsive interference for block sparse system identification as compared with APSA and MIP-APSA.

Protecting Fly-By-Wireless Systems From Remote Attacks, Vahid Heydari

Von Braun Symposium Student Posters

No abstract provided.

Monitoring The Threat Of Sinkhole Formation Under A Portion Of Us 18 In Cerro Gordo County, Iowa Using Tdr Measurements, Kevin O'Connor, Matthew Trainum

Sinkhole Conference 2015

Sinkhole formation is a common occurrence in northeast Iowa, and U.S. 18 in Cerro Gordo County was constructed over an area where sinkhole formation had only been locally known. It had not been recorded or identified in the Iowa DNR database at the time. Since 2004, sinkholes have developed along the right of way. Geophysical surveys contributed very little in the identifying the cause. However a Soil Survey (drilling program) identified numerous voids within carbonate bedrock. The soil borings indicated that shale overlying the carbonate rock has been removed/eroded, and resulted in the development of a karst subsurface through the …

Industry-University Collaboration: A University Of Dayton Model, Guru Subramanyam

Electrical and Computer Engineering Faculty Publications

This paper introduces industry-university collaboration activities currently in place at the University of Dayton's School of Engineering. These collaborations are important to prepare industry-ready graduates who excel in technical, entrepreneurial, and leadership skills. One of the key curricular components is the industry-sponsored multidisciplinary projects. Industry involvement in advisory committee, strategic research partnerships, and other forms are discussed.

Negative Index In A Lossy Chiral Metamaterial Under First-Order Material Dispersion Using A Drude Model, Tarig A. Algadey, Monish Ranjan Chatterjee

Electrical and Computer Engineering Faculty Publications

Using the Drude model for complex conductivity,phase and group velocities, and indices are calculated under first-order dispersion in chiral metamaterials. Conditions are derived for negative index, and the results compared with parametric analyses.

Translation Of Rabindranath Tagore's 'Ode To Africa', Monish Ranjan Chatterjee

Electrical and Computer Engineering Faculty Publications

During his illustrious lifetime, Rabindranath Tagore travelled extensively around the world, spreading inspiration and gaining veneration in most destinations as the emissary of the East and of a deeply futuristic Universalist philosophy. An assessment of the intellectuals and cultural icons of the world whom Tagore encountered, interacted with, and influenced, is both astonishing and indeed still waiting to be adequately evaluated. His exchanges with Einstein, Wells, Rolland, Gide, Freud, Durant, Yeats, Rothenstein, Andrews, Noguchi, Gandhi, Radhakrishnan, Nehru, Bose and numerous others are well-documented. Tagore's literary works and public life centered on rejoicing in and celebrating everything unique and artistic in …

Spectral And Performance Analysis For The Propagation And Retrieval Of Signals From Modulated Chaos Waves Transmitted Through Modified Von Karman Turbulence, Fathi H.A. Mohamed, Monish Ranjan Chatterjee

Electrical and Computer Engineering Faculty Publications

A transfer function formalism is applied to track propagation of modulated chaos waves through modified von Karman phase turbulence; the demodulated signal is examined vis-à-vis performance relative to turbulence strength in comparison with non-chaotic propagation.

Vanadium Oxide Thin-Film Variable Resistor-Based Rf Switches, Kuanchang Pan, Weisong Wang, Eunsung Shin, Kelvin Freeman, Guru Subramanyam

Electrical and Computer Engineering Faculty Publications

Vanadium dioxide (VO2) is a unique phase change material (PCM) that possesses a metal-to-insulator transition property. Pristine VO2 has a negative temperature coefficient of resistance, and it undergoes an insulator-to-metal phase change at a transition temperature of 68°C. Such a property makes the VO2 thin-film-based variable resistor (varistor) a good candidate in reconfigurable electronics to be integrated with different RF devices such as inductors, varactors, and antennas. Series single-pole single-throw (SPST) switches with integrated VO2 thin films were designed, fabricated, and tested. The overall size of the device is 380 μm × 600 μm. The SPST switches were fabricated on …

Vessel Tracking Using Automatic Identification System Data In The Arctic, Torkild Eriksen, Øystein Olsen

ShipArc 2015 Conference

No abstract provided.

An Improved Variable Step-Size Zero-Point Attracting Projection Algorithm, Jianming Liu, Steven L. Grant

Electrical and Computer Engineering Faculty Research & Creative Works

This paper proposes an improved variable step-size (VSS) scheme for zero-point attracting projection (ZAP) algorithm. The proposed VSS is proportional to the sparseness difference between filter coefficients and the true impulse response. Meanwhile, it works for both sparse and non-sparse system identification, and simulation results demonstrate that the proposed algorithm could provide both faster convergence rate and better tracking ability than previous ones.

Creation Of Carbon Nanotube Based Biosensors Through Dielectrophoretic Assembly, Nilan S. Mani, Steve Kim, Kaushik Annam, Danielle Bane, Guru Subramanyam

Electrical and Computer Engineering Faculty Publications

Due to their excellent electrical, optical, and mechanical properties, nanosized single wall carbon nanotubes (SWNTs) have attracted significant attention as a transducing element in nano-bio sensor research. Controlled assembly, device fabrication, and bio-functionalization of the SWNTs are crucial in creating the sensors. In this study, working biosensor platforms were created using dielectrophoretic assembly of single wall carbon nanotubes (SWNTs) as a bridge between two gold electrodes. SWNTs in a commercial SDS surfactant solution were dispensed in the gap between the two gold electrodes, followed by applying an ac voltage across the two electrodes. The dielectrophoresis aligns the CNTs and forms …

Automatic Registration Of Optical Aerial Imagery To A Lidar Point Cloud For Generation Of City Models, Bernard Olushola Abayowa, Alper Yilmaz, Russell C. Hardie

Electrical and Computer Engineering Faculty Publications

This paper presents a framework for automatic registration of both the optical and 3D structural information extracted from oblique aerial imagery to a Light Detection and Ranging (LiDAR) point cloud without prior knowledge of an initial alignment. The framework employs a coarse to fine strategy in the estimation of the registration parameters. First, a dense 3D point cloud and the associated relative camera parameters are extracted from the optical aerial imagery using a state-of-the-art 3D reconstruction algorithm. Next, a digital surface model (DSM) is generated from both the LiDAR and the optical imagery-derived point clouds. Coarse registration parameters are then …

Dna Based Electrolyte/Separator For Lithium Battery Application, Jitendra Kumar, Fahima Ouchen-Bouchendouka, Devin A. Smarra, Guru Subramanyam, James Grote

Electrical and Computer Engineering Faculty Publications

In this study, we demonstrated the use of DNA-CTMA (DC) in combination with PolyVinylidene Fluoride (PVDF) as a host matrix or separator for Lithium based electrolyte to form solid polymer/gel like electrolyte for potential application in Li-ion batteries.

The addition of DC provided a better thermal stability of the composite electrolyte as shown by the thermos-gravimetric analysis (TGA). The AC conductivity measurements suggest that the addition of DC to the gel electrolyte had no effect on the overall ionic conductivity of the composite. The obtained films are flexible with high mechanical stretch-ability as compared to the gel type electrolytes only.

A Simple Polarization Reconfigurable Printed Monopole Antenna, Afshin Panahi, Xiulong Bao, Kansheng Yang, Oisin O'Conchubhair, Max Ammann

Articles

A simple polarization reconfigurable printed monopole antenna is proposed for wireless applications. Conducting strips are used to connect to the ground plane providing the necessary additional modes for circular-polarization. Linear-polarization, right hand or left hand circular-polarization can be realized using only two PIN diodes, which connect to the ground plane, minimizing their effect on radiation characteristics. The mechanism is described, and key antenna parameters are studied and optimized. The antenna is prototyped and tested for all polarization configurations.

Design Method For Wideband Circularly Polarized Slot Antennas, Adam Narbudowicz, Matthias John, Vit Sipal, Xiulong Bao, Max Ammann

Articles

A compact ultrawideband (UWB) circularly polarized (CP) slot antenna is proposed with a methodology for automated reoptimization for packaging with proprietary devices. The slot structure employs a dual-feed with an integrated compact UWB phase shifter. The design process involves an advanced optimization algorithm and demonstrates the use of spline curves for generation of CP signals. These allow easy optimization, while preserving phase coherency across a wideband. The prototyped antennahas a CP bandwidth of 54% (from 3.2 to 6.1 GHz).

Secure Transmission And Retrieval Of Images In Conjunction With Steganography Using Chaos In Nonlinear Acousto-Optic Feedback, Monish Ranjan Chatterjee, Fares S. Almehmadi

Electrical and Computer Engineering Faculty Publications

Digital images are encrypted onto a chaotic carrier in a Bragg cell under hybrid nonlinear feedback and secure data is embedded into the system via steganography. System robustness (with and without channel noise) is analyzed vis-a-vis information security.

Classification Of Digital Communication Signal Modulation Schemes In Multipath Environments Using Higher Order Statistics, Meena Sreekantamurthy

Electrical & Computer Engineering Theses & Dissertations

Automatic identification and classification of modulation schemes in communication signals and decoding of information from the captured signals has assumed great importance recently in the wireless communication industry. Advancements in communications have introduced a large variety of modulation schemes in the transmitted signals; consequently, reliable detection of the modulation scheme in the intercepted signal has become an important issue in communications. It is the aim of this thesis to address this issue of reliable detection. Therefore, this research is focused on modeling and simulation of an automatic modulation classifier and, in particular, on the development of algorithms to use higher …

Folded Meander Line Antenna For Wireless M-Bus In The Vhf And Uhf Bands, Abraham Loutridis, Matthias John, Max Ammann

Articles

The first dual-band printed monopole antenna for Wireless M-Bus and M2M applications with operation in the VHF and lower UHF band is presented. The antenna operates at 169 MHz and 433 MHz. The miniaturisation of the proposed compact antenna is based on a double-sided meandering structure offering an easily controlled large frequency-ratio. The antenna provides high total efficiency and gain in both bands. Measured and simulated results are reported.

Text-Independent Speaker Identification Using Statistical Learning, Alli Ayoola Ojutiku

Graduate Theses and Dissertations

The proliferation of voice-activated devices and systems and over-the-phone bank transactions has made our daily affairs much easier in recent times. The ease that these systems offer also call for a need for them to be fail-safe against impersonators. Due to the sensitive information that might be shred on these systems, it is imperative that security be an utmost concern during the development stages. Vital systems like these should incorporate a functionality of discriminating between the actual speaker and impersonators. That functionality is the focus of this thesis.

Several methods have been proposed to be used to achieve this system …

Reducing Multiple Access Interference In Broadband Multi-User Wireless Networks, Ali Nayef Alqatawneh

Graduate Theses and Dissertations

This dissertation is devoted to developing multiple access interference (MAI) reduction techniques for multi-carrier multi-user wireless communication networks.

In multi-carrier code division multiple access (MC-CDMA) systems, a full multipath diversity can be achieved by transmitting one symbol over multiple orthogonal subcarriers by means of spreading codes. However, in frequency selective fading channels, orthogonality among users can be destroyed leading to MAI. MAI represents the main obstacle to support large number of users in multi-user wireless systems. Consequently, MAI reduction becomes a main challenge when designing multi-carrier multi-user wireless networks. In this dissertation, first, we study MC-CDMA systems with different existing …

Omnidirectional Circularly Polarized Antennas – A Small Antenna Perspective, Adam Narbudowicz, Max Ammann

Articles

The paper discusses recent developments and challenges in the design of small omnidirectional
circularly-polarized (CP) antennas. Although omnidirectional CP coverage is easily achievable using antenna arrays, it is just recently that small and low-cost antennas delivered this functionality.
The paper addresses practical design problems for these antennas, not reported in previous publications.
This includes selection of the omnidirectional plane relative to the ground plane and measurement challenges. Future perspectives on how these antennas can provide electronically steerable beams are investigated using simulated results.

Common Mode Filtering With Metamaterial-Inspired Structures, Sang G. Kang

Rose-Hulman Undergraduate Research Publications

High-speed digital communication links typically employ differential signaling as an alternative to single ended signaling. The design challenge using these differential lines are that perfect symmetry in the signals sent and in the physical communication line must be maintained to prevent some of the differential mode signal’s energy to be converted to a common-mode signal. The main objective of a common-mode filter is to filter out this common-mode noise while leaving the differential signal intact. Our strategy in this project was to look into past work on common Electric Field Magnetic Field Common Mode Signal Differential Mode Signal Magnetic Field …

Cooperative 3-D Map Generation Using Multiple Uavs, Andrew Erik Lawson

University Scholar Projects

This report aims to demonstrate the feasibility of building a global 3-D map from multiple UAV robots in a GPS-denied, indoor environment. Presented are the design of each robot and the reasoning behind choosing its hardware and software components, the process in which a single robot obtains a individual 3-D map entirely onboard, and lastly how the mapping concept is extended to multiple robotic agents to form a global 3-D map using a centralized server. In the latter section, this report focuses on two algorithms, Online Mapping and Map Fusion, developed to facilitate the cooperative approach. A limited selection …

A Transfer Function Based Frequency Model For Propagation Of A Chaos Wave Through Modified Von Karman Turbulence Under Various Chaos And Turbulence Conditions, Monish Ranjan Chatterjee, Fathi H.A. Mohamed

Electrical and Computer Engineering Faculty Publications

Complex phasor fields for electromagnetic wave propagation through von Karman turbulence and acousto-optic RF chaos are derived en route to the effective transfer function between chaos and narrow turbulence. Results are tested for several turbulence and chaos conditions.

Emergence Of Negative Index In A Lossy Chiral Metamaterial Under First-Order Material Dispersion, Monish Ranjan Chatterjee, Tarig A. Algadey

Electrical and Computer Engineering Faculty Publications

For a lossless dispersive chiral material, negative index (NIM) occurred only by use of parametric analysis (and not via practical models) to first-order. These findings are re-visited for the lossy problem and the results are compared.

Universal Uav Payload Interface, Nolan Reker, David Troy Jr, Drew Troxell

Computer Engineering

Unmanned Aerial Vehicle (UAV) technology is becoming increasingly accessible for civilian use. Both open-source and commercial-purpose UAVs can be obtained affordably or even built. However, the platforms available are very segmented in their customization to a specific application (i.e. land surveying, payload delivery). This project aims to create a Universal Payload Interface (UPI) mounted to the underside of multi-rotors or other UAVs to enable the attachment of customizable sensor payloads. These payloads allow a single UAV to be rapidly reconfigured to perform a multitude of tasks.

The Universal Payload Interface facilitates communication between the payload, onboard flight controller, and operator …

A Modular Approach For Key-Frame Selection In Wide Area Surveillance Video Analysis, Almabrok Essa, Paheding Sidike, Vijayan K. Asari

Electrical and Computer Engineering Faculty Publications

This paper presents an efficient preprocessing algorithm for big data analysis. Our proposed key-frame selection method utilizes the statistical differences among subsequent frames to automatically select only the frames that contain the desired contextual information and discard the rest of the insignificant frames.

We anticipate that such key frame selection technique will have significant impact on wide area surveillance applications such as automatic object detection and recognition in aerial imagery. Three real-world datasets are used for evaluation and testing and the observed results are encouraging.

The Electric Reel For Soccer Fields, Stephen Taylor

Electrical Engineering

Painting a soccer field consumes too much time. The process of reeling the string after laying out string along the field needs to improve. As a result, my project addresses improvements in how the workers retrieve the string through the production of an electric reel. This electric reel allows the worker to have control of the speed, direction, and on/off state of the device. Direction control allows the user ability to reel and unwind the string. Variable speed allows the user to control how fast the reel unwinds and reels the string. The device gathers string in an orderly manner …

Uav Avoidance System, Zachary Stargensky

Electrical Engineering

This is an ongoing design project being funded by Northrop Grumman in which Cal Poly SLO is working in collaboration with Cal Poly Pomona to complete a working design at the end of each academic school year. The project consists of two UAVs that can navigate around a given area without running into each other or other obstacles. There are sensors to be mounted on the vehicles that can detect objects within a given distance and a microcontroller is used to control how the vehicle responds to an object being detected. The avoidance code has been written for previous years’ …

Unmanned Aircraft Systems: Air-Ground Channel Characterization For Future Applications, David W. Matolak, Ruoyu Sun

Faculty Publications

Unmanned aircraft systems (UASs) are being used increasingly worldwide. These systems will operate in conditions that differ from conventional piloted aircraft, and this implies that the airground (AG) channel for UASs can differ significantly from the traditional, simple, AG channel models. After providing some background and motivation, we describe the AG channel features and our efforts in measuring and modeling the AG channel. Some example measurement and model results-for the path loss and the Ricean K-factor-are provided to illustrate some of the interesting AG channel characteristics that are still being investigated.