Systems and Communications Commons^™

Length Selectable, Hardware Efficient Pseudorandom Code Generator, John F. Brendle Jr., James P. Stephens Sr., Michael A. Temple, Robert S. Parks

AFIT Patents

A method and device for generating a pseudorandom electrical signal for enabling spread spectrum communication scrambling by directing data entry into pseudorandom number generator integrated circuit chip controlling registers using a length selectable feedback logic data sequence and either computer programmable selector means or manual selector means to communicate the logic data sequence characters to buffers. The logic data sequence characters are clocked to a pseudorandom number generating register of an integrated circuit chip and the pseudorandom electrical signal is generated by selectively tapping a signal code therefrom. The method and device features a pseudorandom electrical signal length varying capability …

Real-Time Travel Time Estimation Using Macroscopic Traffic Flow Models, Pushkin Kachroo, Kaan Ozbay, Antoine G. Hobeika

Electrical & Computer Engineering Faculty Research

This paper presents the estimation of travel time on highways based on macroscopic modelling. The focus is on real-time values as compared to average or static values. The macroscopic models are used for distributed and time/space lumped settings and corresponding travel time estimation functions and algorithms are developed. The implications of these algorithms for the implementation of various incident management and traffic control strategies are also discussed.

Feedback Correction Of Angular Error In Grating Readout, Monish Ranjan Chatterjee, Sundaram Ramachandran

Electrical and Computer Engineering Faculty Publications

Angular and wavelength READ beam errors in holographic interconnection systems are often a recurrent problem. Several strategies have been proposed to minimize or eliminate such READOUT misalignments.

Some years ago, Chatterjee and co-workers proposed a method involving READ beam wavelength tuning to correct output angular errors. In this paper, we investigate the possibility of using an acousto-optic (A-O) Bragg cell with optoelectronic feedback to dynamically correct the scattered beam for deviations in the incidence direction of the READ beam of a hologram. The concept here is based on an acoustic frequency feedback strategy used recently by Balakshy and Kazaryan for …

A Study Into Lack Of Product Innovation And Business Techniques At The Tricycle Workshop And Rrs Lessons To Small Companies, E Elias

Tanzania Journal of Engineering and Technology (TJET)

A study was carried out at the Tricycle Workshop (TW) which was facing the problem of !ack of orders and therefore stagnation Of business. The objective of the study was to find out reasons for this situation and to propose possible remedial solutions. The study was conducted using the principles of the Product Innovation process where internal and external issues related to the business Of the company were investigated for information. Analysis Of information obtained indicated that the bad situation of the TW had mainly been caused by the nature of the tricycles-supply system whereby users (disabled persons) are unable …

Apparatus And Method For Two Stage Hybrid Space-Time Adaptive Processing In Radar And Communication Systems, Todd B. Hale, Michael C. Wicks, Raviraj S. Adve

AFIT Patents

A Two-Stage Hybrid algorithm offers significant improvement in the false alarm rate and detection performance of Space-Time Adaptive Processing in non-homogeneous environments for both radar and digital communications. The first stage analyzes data from a range cell of interest by direct data domain processing, suppressing discrete interferers within the range cell of interest. The second stage implements a purely statistical STAP algorithm, preferably an enhanced version of the Joint-Domain Localized ("JDL") statistical algorithm. For radar this second stage estimates the interference within the range cell of interest from the surrounding range cells. For a communications system, the second stage estimates …

Overview Of Acousto-Optic Bistability, Chaos, And Logical Applications, Monish Ranjan Chatterjee, Erol Sonmez

Electrical and Computer Engineering Faculty Publications

An overview is presented of the key results in the field of acousto-optic bistability in the past two decades. It is shown that the basic acousto-optic bistable device may be described as a nonlinear dynamical system which satisfies a quadratic map. Thereafter, details are presented of several analytical methods, computer modeling approaches, including the SPICE circuit modeling technique, and experiments that have been used to understand the phenomenon.

Extensions to logical and digital applications are also discussed.

Cyberpsychology And Virtual Reality: Is An Update Necessary, Ibpp Editor

International Bulletin of Political Psychology

This article explores the notion that something called "human nature" may be changing in an era of significant information technology developments.

A Method Of Implementing The Interleaver In 3g Wireless Communication Systems For Randomization Of Burst Errors, Eric Duquette

Inquiry: The University of Arkansas Undergraduate Research Journal

In less than a year or two, third generation ( 3G) wireless communication systems will be replacing the currently existing second generation (2G) wireless systems and be used worldwide. The 3G systems will have a higher data transfer capacity, which allows for simultaneous data, voice, and video transfer (e.g., multimedia applications) while most of 2G systems only allow for low-rate data and voice transfer. The wireless communications industry has set standards for 3G, which detail various operations of the technology. It should be noted that the 3G standards outline only the different operations and not the processes for the production …

Flowers For The World: Developing A Business Game To Support The Teaching Of Is Concepts, Trevor T. Moores, Jerry Cha-Jan Chang

Management, Entrepreneurship and Technology Faculty Research

One of the key problems in teaching fundamental concepts in information systems is how to ground the theory in experiences that the students can relate to. To overcome this problem, a business game called Flowers For The World has been developed and used across a wide variety of IS courses. This paper will describe the game and the result of using it for a 300-level course in analysis and design. The possibility exists that the game could be developed to provide a common business foundation across all business school curricula.

Study Of Dynamics And Mechanism Of Metal-Induced Silicon Growth, Elena A. Guliants, Wayne A. Anderson

Electrical and Computer Engineering Faculty Publications

The present study addresses the mechanism of metal-induced growth of device-quality silicon thin films. Si deposition was performed by magnetron sputtering on a 25-nm-thick Ni prelayer at 525–625 °C and yielded a continuous, highly crystalline film with a columnar structure. A Ni disilicide intermediate layer formed as a result of the Ni reaction with Si deposit provides a sufficient site for the Si epitaxial growth because lattice mismatch is small between the two materials. The reaction between Ni and Si was observed to progress in several stages. The NixSiy phase evolution in a Ni:Si layer was studied by x-ray photoelectron …

Atm Lane Simulator, Kim Joo Ching

Student Works (2000-2009)

This project describes the development of ATM Local Area Network Emulation (LANE) simulator components. In LANE, an A TM network is configured to simulate an Ethernet or token ring network and coexist with the legacy network without making any modification to Them.The development of this simulator incorporates several important features. The most important feature of the simulator is that it is build based on object-oriented approach, which is able to provide the benefits of re usability, flexibility and extensibility. The second important feature is that it supports multi threaded operations. This means that every object able to act simultaneously. Besides …

Development Of Object-Oriented Components For Atm Network Simulation With Emphasis On Congestion Control, Wai Kit Sin

Student Works (2000-2009)

Asynchronous Transfer Mode (ATM) is a very high-speed transmission technology. The barrage of technological advancements has continuously enhanced the network performance. There is an increasing dependence on the network. Thus, there is a need to accurately predict the impact of network and applications changes in the dynamic network environment. The network simulator is a tool to analyze the behavior of ATM networks without the expense of building a real network. The simulation of this simulator will give the results that imitate the real network environment. The aim of this project is to develop object-oriented components for an ATM Network Simulator …

Indoor Radio Channel Of Bluetooth Technology, Kai Hock Charlie Khoo

Theses : Honours

This thesis discusses the findings of the final year project involving the characterisation of indoor radio channel specified by Bluetooth technology through theoretical analysis, simulations and actual measurements through field experiments. The concepts of indoor radio propagation effects and its statistical models arc explored. In addition, Bluetooth specifications are also studied and presented in Section 1. These provided a clear understanding of the radio propagation behaviour inside a building and the radio performance of Bluetooth specifications. Profound understanding of the propagation characteristics of the indoor radio channel is a major requirement for successful design of any indoor wireless communication systems. …

Isolated Ramp Metering Feedback Control Utilizing Mixed Sensitivity For Desired Mainline Density And The Ramp Queues, Pushkin Kachroo, Kaan Ozbay, Donald E. Grove

Electrical & Computer Engineering Faculty Research

This paper presents a feedback control design for isolated ramp metering control. This feedback control design, unlike the existing isolated feedback ramp controllers, also takes into account the ramp queue length. Using a nonlinear H∞ control design methodology, we formulate the problem in the desired setting to be able to utilize the results of the methodology.

Dynamic Bandwidth Allocation Using Neural-Fuzzy In Atm Network, Yan Sing Chua

Student Works (2000-2009)

Dynamic bandwidth allocation is becoming one of the crucial issues in the design and research in the computer network. This is due to the continuous increasing demand of intensive applications that require more bandwidth while retaining higher quality. Dynamic bandwidth allocation utilises the current network state information to optimise the bandwidth distribution. The state information can be gathered through prediction using past data and measurement on current state. Agility and flexibility of dynamic bandwidth allocation using Neural-Fuzzy has the advantage that it can adapt to the state changes of the network. ATM network carries heterogeneous traffic and this causes the …