Systems and Communications Commons^™

Integrated Corridor Management Framework For Severe Freeway Incidents, Sanjida Afroz Iqra

Graduate Studies Theses and Dissertations 2026

Traffic incidents are a major source of non-recurrent congestion on urban freeways, generating substantial mobility, safety, and economic impacts. Severe incidents that block multiple or all travel lanes are particularly disruptive because they degrade freeway operations and propagate congestion onto surrounding arterials. Effective Integrated Corridor Management (ICM) requires the ability to identify severe incidents, estimate their network-wide impacts, and anticipate the traffic conditions and driver behaviors that contribute to instability. This dissertation develops a data-driven ICM framework to address these challenges using real-world incident, crash, detector, and connected vehicle data from major Central Florida corridors, including I-4 and SR-417. The …

Generative Ai: Another Chapter Of Human-Machine Communication, Seungahn Nah, Patric R. Spence

Human-Machine Communication

This editorial introduces a special issue of Human-Machine Communication that explores how generative AI reshapes the communicative relationship between humans and machines. It highlights emerging research on technology use, education, interpersonal dynamics, and trust in AI-generated content, emphasizing that generative AI’s significance lies not in novelty but in the social negotiations it provokes around meaning, authority, and credibility.

Novel Phase Shifters Using Reconfigurable Filters, Georgiy Brussenskiy

Graduate Thesis and Dissertation 2023-2024

Phase shifters play a crucial role in radar, satellite communications, and 5G networks. Recently, the idea of using filters as phase shifters have attracted much interest due to providing many benefits such as smaller area, lower noise figure, easier fabrication method as compared with other technologies, reduced cost, and the ability to work as multi-functioning device. This work focuses on the implementation of bandstop-based and bandpass-based filtering phase shifters. For the bandstop-based approach, some of the resonating structures that were examined are stubs, LC tanks, L-shaped/U-shaped half wavelength resonators and many others. Periodic stub loading filter design method was compared …

Multi-Element Mobile Optical Wireless Communication Networks, Pooya Nabavi

Electronic Theses and Dissertations, 2020-2023

The capacity of traditional wireless radio-frequency (RF) networks such as wireless fidelity (Wi-Fi) is insufficient to meet ever-increasing demand for bandwidth stemming from growth in smart, connected devices. The omni-directional nature of RF signals does not allow easy solutions that involve adding more access points to support more devices and capacity because they start to interfere with each other. Optical wireless communications (OWC) have already extended the superb bandwidth capacity of wired optical datalinks to sites that cannot be connected by traditional optical fibers, such as satellites and disaster recovery areas. Development of OWC technologies for dense, multi-user environments promises …

Human-Machine Communication: Complete Volume. Volume 3. Diffusion Of Human-Machine Communication During And After The Covid-19 Pandemic

Human-Machine Communication

This is the complete volume of HMC Volume 3. Diffusion of Human-Machine Communication During and After the COVID-19 Pandemic

What Will Affect The Diffusion Of Ai Agents?, James W. Dearing

Human-Machine Communication

For billions of people, the threat of the Novel Coronavirus SARS-CoV-2 and its variants has precipitated the adoption of new behaviors. Pandemics are radical events that disrupt the gradual course of societal change, offering the possibility that some rapidly adopted innovations will persist in use past the time period of the event and, thus, diffuse more rapidly than in the absence of such an event. Human-machine communication includes a range of technologies with which many of us have quickly become more familiar due to stay-athome orders, distancing, workplace closures, remote instruction, home-bound entertainment, fear of contracting COVID-19, and boredom. In …

The Role Of Vidura Chatbot In The Diffusion Of Knowcovid-19 Gateway, Kerk F. Kee, Prasad P. Calyam, Hariharan Regunath

Human-Machine Communication

The COVID-19 pandemic is an unprecedented global emergency. Clinicians and medical researchers are suddenly thrown into a situation where they need to keep up with the latest and best evidence for decision-making at work in order to save lives and develop solutions for COVID-19 treatments and preventions. However, a challenge is the overwhelming numbers of online publications with a wide range of quality. We explain a science gateway platform designed to help users to filter the overwhelming amount of literature efficiently (with speed) and effectively (with quality), to find answers to their scientific questions. It is equipped with a chatbot …

Communicative Development And Diffusion Of Humanoid Ai Robots For The Post-Pandemic Health Care System, Do Kyun David Kim, Gary Kreps, Rukhsana Ahmed

Human-Machine Communication

As humanoid robot technology, anthropomorphized by artificial intelligence (AI), has rapidly advanced to introduce more human-resembling automated robots that can communicate, interact, and work like humans, we have begun to expect active interactions with Humanoid AI Robots (HAIRs) in the near future. Coupled with the HAIR technology development, the COVID-19 pandemic triggered our interest in using health care robots with many substantial advantages that overcome critical human vulnerabilities against the strong infectious COVID-19 virus. Recognizing the tremendous potential for the active application of HAIRs, this article explores feasible ways to implement HAIRs in health care and patient services and suggests …

Our Future Arrived: Diffusion Of Human-Machine Communication And Transformation Of The World For The Post-Pandemic Era, Do Kyun David Kim, Gary Kreps, Rukhsana Ahmed

Human-Machine Communication

The world is getting into a new phase in history. For the first time, humans are verbally communicating and developing meaningful relationships with non-living objects. AI is a wormhole to open a gateway to the new world, and the COVID-19 pandemic prepared the world to transform its system to be an open system that responds to, communicates with, and utilizes the remnants coming out of the wormhole of the new world. Now, we urgently need to create a holistic discourse on how we can recognize, develop, or shape the identities of communicable machines as people develop a partnership with them. …

Mode Conversions In Active Semiconductor Mqw Integrated Optics Devices, Yousef Alahmadi

Electronic Theses and Dissertations

Optical communication systems had successfully met the increasing demands for higher communication speeds through the utilization of all degrees of freedom of the light propagating in a single-mode fiber (SMF). However, the Shannon limit restricts further improvements of the capacity in the SMFs. Space-division multiplexing (SDM) offers a way for further increasing the capacity of optical fibers through the utilization of the spatial domain. However, for it to be successfully implemented, many integral parts of the optical communication must be tuned or modified to work effectively with the multimode fibers, including few-mode amplifiers, and mode converters. In this work, we …

Design And Analysis Of Class Ab Rf Power Amplifier For Wireless Communication Applications, Mohamed El-Dakroury

Retrospective Theses and Dissertations

The Power Amplifier is the most power-consulting block among the building blocks of RF transceivers. It is still a difficult problem to design power amplifiers, especially for linear, low voltage operation. Until now power amplifiers for wireless applications is being produced almost in GaAs processes with some exceptions in LDMOS, Si BJT, and SiGe HBT. The submicron CMOS processes for power amplifiers are under research focus since CMOS offers integration for power amplifier with rest of the transceivers blocks due to its high yield. Also CMOS process is cheap.

This thesis report details the design process of a class AB …

A Hierarchical Channel Selection Scheme For Macro/Micro Cellular Networks, Ayesha Zaheer

Retrospective Theses and Dissertations

Hierarchical channel allocation schemes for cellular networks offer a promising approach to solve the pressing problem of increasing the cellular servicing capacity in spite of the limited radio spectrum available. We propose a hierarchical channel selection scheme for handling handoffs and new calls in micro/macro cellular systems. The scheme is intended to improve the performance and quality of service of these systems by increasing the cell channel utilization, reducing the handoff blocking probability and improving the responsive to new calls.

The proposed scheme is based on several design enhancements including an overflow buffer, which is used for handoff calls that …

Signal Integrity In Deep Submicron Cmos Chip Design, Jignesh Suresh Sonchhatra

Retrospective Theses and Dissertations

Advancement in CMOS technology has become a driving force in the advancement of today's IC design arena. In the past few years, considerable research has been done on the CMOS devices and circuits. Constant efforts have been made to realize smaller and smaller devices by reducing the channel length of the transistors and scaling down various other device parameters. Consequently, various problems have arisen such as interconnect delay, signal integrity and signal coupling.

The purpose of this thesis is to review and understand current problems in IC design and come up with various solutions to them. Efforts have been made …

Applications Of Lattice Filters To Quadrature Mirror Filter Banks, Gregory R. Jaspers

Retrospective Theses and Dissertations

Presented is a method for designing and implementing lattice filters to be used in Quadrature Mirror Filter (QMF) Banks. Quadrature Mirror Filter Banks find use in applications where a signal must be spilt into subbands operated on then reconstructed in the output. Because of their structure, lattice filters do this very well and allow perfect reconstruction, even when the lattice coefficients must be quantized. In this paper QMF's and Lattice Filters are derived and analyzed. Application of the lattice filter is presented along with a design program and example of its use to implement a QMF. The computer aided design …

An Ada Simulator For The Structured Functional Simulation Of A Digital Signal Processing System, Christopher Paul Roney

Retrospective Theses and Dissertations

A behavioral-level simulator designed for FIRST, a silicon compilation system for digital signal processing, is implemented in the Ada* programming language. The simulator accepts as input a digital signal processing system description written for the FIRST ([ast Implementation of aealtime ~ignal transforms) silicon compiler, and provides an interactive post-processing signal trace facility. The simulator is a time-driven simulator which contains a FIRST description language parser, a subset of the FIRST primitives, and the capacity for maintaining a full history of all signals in the system. The primitives in the FIRST description language are common to digital signal processing systems (e.g., …

Laser Induced Darkening Semiconductor Dope Glasses, Jayant Malhotra

Retrospective Theses and Dissertations

No abstract provided.

A New Method For Broadband Surface Acoustic Wave Diffraction Analysis, Jacqueline Hanvey Hines

Retrospective Theses and Dissertations

This thesis describes an innovative technique for determining the impulse response of a SAW device including the effects of diffraction on both isotropic and anisotropic substrates. The approach presented is unique in that it determines the point-to-point impulse response for the isotropic case using the two-dimensional wave equation, and utilizes a double integral reduction technique to determine the tap-to-tap response, thereby significantly reducing the complexity of the calculations involved. An extension is then made to describe the impulse response of two cascaded transducers of arbitrary geometry, along with some simplifying cases. Previous attempts to model diffraction effects generally utilized either …

Optical Interferometric Formation Of Phased Array Antenna Footprint/, John E. Sherwood

Retrospective Theses and Dissertations

A 40 dB gain RF Low Noise Amplifier (LNA) matched to a photodiode input is designed using TOUCHSTONE (S-parameter based CAD software), built, and tested. The RF LNA formed the detector of a Mach-Zehnder interferometer constructed with single mode fiber, coupler, Gradient Index Rod Acousto-optic modulator (ADM) . (GRINROD) lenses, and an The ADM is used to frequency shift the optical frequency by 125 MHz, and the motion of a GRINROD lens is used to produce an optical phase shift that is recovered at the detector as an electrical phase shift by using heterodyne detection . Finite Hankel transforms are …

Rise Time To Frequency Correlation Of Crosstalk In Coupled Microstrip Lines, Charles Michael Fletcher Jr.

Retrospective Theses and Dissertations

An examination of forward crosstalk in microstrip transmission lines is presented through a computer simulation using SPICE. A non-resistive lumped L-C transmission line model is modified to include capacitive and inductive coupling from adjacent lines. Two adjacent microstrip transmission lines are modeled, and simulation results in both the time and frequency domains are shown. The time domain or transient analysis looks at the effect of rise times on crosstalk. Rise times in the range of 100 to 1000 nanoseconds (ns) are considered. The frequency analysis shows the crosstalk frequency response over the range of 100 to 1600 kilohertz (kHz). The …

A System For Measuring The Phase Difference Between Two Points Of A Propagating Laser Beam, Jefferson E. Odhner

Retrospective Theses and Dissertations

An optical system has been designed, analyzed, implemented, and calibrated which measures the phase difference between two points of a propagating laser beam. The system is a quadrature interferometer whose detector outputs are processed by a computer. This quadrature interferometer measures both the phase and amplitude variations between two points of a laser beam after the beam passes through turbulence . These measurements are in turn processed by a computer to isolate the phase variations from the amplitude variations. Further statistical analysis which can be performed on these phase variations should provide an understanding of the phase fluctuations of propagating …

Method For Sizing Mos Transistors For Vlsi, Matthew J. Amatangelo

Retrospective Theses and Dissertations

Determining the device width to length ratios has typically been an iterative process for the custom IC digital design engineer. After the logic design phase is complete for a particular circuit, the designer would make an educated guess at the device sizes. Then by trial and error, using SPICE or another circuit simulator, suitable sizes would be determined. Unfortunately, this approach is time consuming and the resulting sizes are often a good bit larger than they need to be to maintain a certain speed because of the lack of a rigorous sizing methodology. This paper describes a method for reducing …

Numerical Solutions Of Poisson's Equation In A Superlatice Device, Norman Todd Rollins

Retrospective Theses and Dissertations

The relationship between the built-in potential and the energy bands in a heterojunction device is defined using the Anderson model. Based on this model, Poisson's equation for a nonhomogeneous semiconductor device in thermal equilibrium is derived and solved analytically for the special case of a doubly intrinsic abrupt heterojunction. Several numerical methods of solving Poisson's equation for general cases are explored to find the most efficient method. The validity of the chosen numerical method is tested against both the analytical solution for a Ge/GaAs doubly intrinsic diode and recently published results from similar numerical simulation studies. A p-i-n superlattice device …

Phase Noise Analysis And Basic Measuring Techniques, James A. Ferrell

Retrospective Theses and Dissertations

Oscillators are important elements of RF and microwave communications systems. The increased use of the electromagnetic spectrum requires the use of better and cleaner oscillators. Local oscillators in RF to IF converters play a big role in the overall performance of the receiver systems because phase noise in the local oscillator can drastically reduce the signal to noise ratio at the output of the receiver, especially if the converter is at the front end. Phase noise is the parameter used to describe oscillator stability. The analysis and basic measurement techniques of phase noise are performed in this report.

This research …

Uniformity Correction For A Scanned Long Wavelength Infrared Focal Plane Array, George C. Heinold

Retrospective Theses and Dissertations

This paper presents an alternative approach in providing uniformity correction for an infrared focal plane array by utilizing analog MOSFET circuitry. This technology is compatible with modern VLSI production and is capable of enhanced operation at cryogenic temperatures. The method presented here is a potential contribution to the growing list of special analog circuit configurations which may be incorporated for on-chip signal processing, inside the cryogenic dewar assembly. Electronic packaging of current thermal systems could be significantly reduced in size and weight by trading some of the cumbersome digital algorithms and complex post-processing circuitry for implementation in VLSI form.

The …

A Piezoelectric Actuated Scanning Mirror System Utilizing A Type One Control Loop, David Gibbs

Retrospective Theses and Dissertations

The purpose of this thesis is to design and build an improved control loop for a piezoelectric actuated scanning mirror system. A control system has been built having zero steady state position error and an 80 Hertz bandwidth. This was achieved by placing the piezoelectric actuator in the feedback path of an operational amplifier and placing series cascaded notch filters and lead compensators in the forward path of the control loop. A prototype system, including compensation and feedback, is developed. Its performance compares favorably with that of the system model. It is capable of plus and minus 1.7 degrees of …

Barium Borate In Parametric Oscillation And 1.54 Micron Generation, Mark Kerrigan

Retrospective Theses and Dissertations

As to date, there are several relatively new crystals that have been developed for nonlinear or "parametric" optical applications, including KTP, LAP, KNbO3, m=NA, and BaB204 (barium borate, or simply BBO). The latter crystal, BBO, and the use of BBo to achieve parametric oscillation around an eyesafe wavelength of 1.54 microns is the emphasis of this paper.

Unpublished material includes determining the optimum type of coupling and pump wavelength used when generating 1.54 μm eyesafe radiation based upon Poynting vector walk off, suscpetibilityies, and both signal angular and spectral acceptance widths. Poynting vector walk off curves for linearly polarized extraordinary …

Uniform Energy Discharge For Pulsed Lasers, Eric Calvin Koschmann

Retrospective Theses and Dissertations

The art of achieving a large energy discharge in a controlled manner with relative ease is to use a pulse forming network. Historically the design of such networks generally used a single inductor and capacitor. Although easy to design and implement, this practice does not provide optimum performance in all cases. In particular, most laser welding requires a uniform energy discharge in a pulse to produce a high quality weld. Analysis has shown that when the pulse forming network approximates a lumped constant transmission line a maximum flat pulse is produced with minimal degradation of the pulse rise time. This …

Three-Level Block Truncation Coding, Deborah Ann Lee

Retrospective Theses and Dissertations

Block Truncation Coding (BTC) techniques, to date, utilize a two-level image block code. This thesis presents and studies a new BTC method employing a three-level image coding technique. This new method is applied to actual image frames and compared with other well-known block truncation coding techniques.

The method separates an image into disjoint, rectangular regions of fixed size and finds the highest and lowest pixel values of each. Using these values, the image block pixel value range is calculated and divided into three equal sections. The individual image block pixels are then quantized according to the region into which their …

Design Of A Bandpass Oculometer, Karin Brandauer

Retrospective Theses and Dissertations

A passive oculometer is a device that measures the position of the eye by utilizing the corneo-retinal potential (CRP) generated by the eye. In this thesis, the Bandpass Oculometer replaces the joystick of a personal computer, allowing the viewer to use a computer simply by moving his eyes. Low frequency noise, present in all electronic circuits, produces an offset from the reference point, the center of the screen. In previous lowpass oculometry studies at University of Central Florida, this offset caused the cursor to drift toward the edge of the field of view within a period of 30 seconds, decreasing …

Computer Aided Design Of Linear Phase Finite Impulse Response Digital Filters, Wentao Lyou

Retrospective Theses and Dissertations

This research report is an investigation of techniques for designing linear phase finite-duration impulse response (FIR) filters. The software package, CADFIR, developed for this project can be used to design linear phase FIR digital filters via three well-known design techniques: the window method, the frequency sampling method, and the optimal filter design method. CADFIR has options for designing such standard filters as lowpass, highpass, bandpass, and bandstop filters as well as multipassband-stopband filters. The fundamental properties of FIR filters are discussed and design algorithms associated with the three FIR filter design techniques are developed. Design examples are included and the …