Electrical and Computer Engineering Commons^™

Special Effects: Antenna Wetting, Short Distance Diversity And Depolarization, Roberto J. Acosta

Online Journal of Space Communication

The Advanced Communication Technology Satellite (ACTS) communications system operates in the Ka frequency band. ACTS uses multiple, hopping, narrow beams and very small aperture terminal (VSAT) technology to establish a system availability of 99.5% for bit-error-rates of 5x 10-7 or better over the continental United States. In order maintain this minimum system availability in all US rain zones, ACTS uses an adaptive rain fade compensation protocol to reduce the impact of signal attenuation resulting from propagation effects. The purpose of this paper is to present the results of system and sub-system characterizations considering the statistical effects of system variances due …

Ka-Band System And Propagation Effects On System Performance, Roberto J. Acosta, Sandra Johnson

Online Journal of Space Communication

The Advanced Communication Technology Satellite (ACTS) is an experimental communications satellite system launched in September 1993. ACTS introduces many new technologies, including operation in the Ka frequency band. ACTS uses multiple hopping narrow beams and very small aperture terminal (VSAT) technology to establish a system availability of 99.5% for a bit-error-rates of 5x10-7 or better over the continental United States. In order to maintain a minimum system availability f 99.5% over all US rain zones ACTS uses an adaptive rain fade compensation protocol to reduce the impact of signal attenuation resulting from propagation effects. The purpose of this paper is …

Comparison Of Multiple Rain Attenuation Models With Three Years Of Ka Band Propagation Data Concurrently Taken At Eight Different Locations, Glenn S. Feldhake, Lynn Ailes-Sengers

Online Journal of Space Communication

In June 1996, Working Party 3M of the ITU-R presented research comparing the estimations of 10 rain attenuation models with the 186 station years of earth-space propagation data contained within the ITU-R database known as DBSG5. Now, twenty-one station years of new data taken exclusively in the Ka band (20.185 GHz and 27.505 GHz) across North America are measured against many of those same models. Results are presented both in terms of error statistics as well as in comparison to the ITU database results.

Rain Attenuation Model Comparison And Validation, Charles E. Mayer, Bradley E. Jaeger

Online Journal of Space Communication

n/a

Ka-Band Propagation Modeling For Fixed Satellite Applications, Asoka Dissanayake

Online Journal of Space Communication

Propagation impairments produced by the troposphere are a limiting factor for the effective use of the 20/30 GHz frequency band. Use of smaller earth terminals, while very attractive for consumer and transportable applications, make it difficult to provide sufficient link margin for propagation related outages. In this context, reliable prediction of propagation impairments for low-availability systems becomes important. This paper addresses the issues related to predicting different types of propagation impairments as well as combining them together to determine the overall impact on satellite links over a wide range of outage probabilities.

A Prediction Model That Combines Rain Attenuation And Other Propagation Impairments Along Earth-Satellite Paths, Asoka Dissanayake, Jeremy Allnutt, Fatim Haidara

Online Journal of Space Communication

The rapid growth of satellite services using higher frequency bands such as the Ka-band has highlighted a need for estimating the combined effect of different propagation impairments. Many projected Ka-band services will use very small terminals and, for some, rain effects may only form a relatively small part of the total propagation link margin. It is therefore necessary to identify and predict the overall impact of every significant attenuating effect along any given path.

A procedure for predicting the combined effect of rain attenuation and several other propagation impairments along earth-satellite paths is presented. Where accurate models exist for some …

Acts Propagation Experiment: Experiment Design, Calibration, And Data Preparation And Archival, Robert K. Crane, Xuhe Wang, D. B. Westenhaver, Wolfhard J. Vogel

Online Journal of Space Communication

The National Aeronautics and Space Administration Advanced Communications Technology Satellite (ACTS) propagation experiment was designed to obtain slant-path attenuation statistics for locations within the United States and Canada for use in the design of low-margin Ka-band satellite communication systems. Experimenters at seven different locations have collected propagation data for more than two years. The propagation terminals used for the experiment were identical. A single preprocessing program was used by the experimenters to provide for automatic calibration, generation of attenuation histograms, and data archival. In this paper, the calibration procedures are described and estimates given for measurement accuracy.

ACTS provided beacons …

Ka-Band Propagation Measurements: An Opportunity With The Advanced Communications Technology Satellite (Acts), Robert Bauer

Online Journal of Space Communication

The Advanced Communications Technology Satellite (ACTS) was conceived at the National Aeronautics and Space Administration (NASA) as a follow-on program to its long history in satellite communications projects that have reduced the risk of developing new technologies that fall outside the sponsorship capability of the private sector.

To counter the foreign challenge that developed in the late 1970's to the once insuperable U.S. lead in this field, ACTS was developed to maintain the U.S. preeminence. Launched in September 1993 from the space shuttle, key technologies on ACTS include a multibeam antenna, a baseband processor, a 900-MHz wideband microwave switch matrix, …

Advanced Communications Technology Satellite (Acts): Design And On-Orbit Performance Measurements, Frank Gargione, R. Acosta, T. Coney, R. Krawczyk

Online Journal of Space Communication

The Advanced Communications Technology Satellite (ACTS), developed and built by Lockheed Martin Astro Space for the NASA Lewis Research Center, was launched in September 1993 on the Shuttle STS 51 mission. ACTS is a digital experimental communications test bed that incorporates gigahertz bandwidth transponders operating at Ka band, hopping spot beams, on-board storage and switching, and dynamic rain fade compensation. This paper describes the ACTS enabling technologies, the design of the communications payload, the constraints imposed on the spacecraft bus, and the measurements conducted to verify the performance of the system in orbit.

Historical Development: Acts Technology, Richard Gedney, Ron Schertler, Frank Gargione

Online Journal of Space Communication

The following material has been extracted from "The Advanced Communications Technology Satellite" book by Richard Gedney, Ron Schertler and Frank Gargione.

Issue 2: From The Guest Editor, Frank Gargione

Online Journal of Space Communication

Guest editor introduction

Historical Development: Acts Program Formulation, Richard Gedney, Ron Schertler, Frank Gargione

Online Journal of Space Communication

The following material has been extracted from "The Advanced Communications Technology Satellite" book by Richard Gedney, Ron Schertler and Frank Gargione.

Solar Photovoltaic Panels Utilization To Extract Clean And Green Energy For Utility Application Using Pvsyst Software: A Bibliometric Review, Anil Bhati, Mansi Srivastava, Nitesh Aggarwal, Hardik Singh, Javed Sayyad, Paresh Nasikkar

Library Philosophy and Practice (e-journal)

This paper presents a survey on educational documents in the field of solar photovoltaic (PV) utilization to extract clean and green energy. The main purpose of this bibliometric analysis is to understand the size of the available documents for the research of PV solar panel utilization using PVsyst. This detailed review was conducted in the PV research, literature considering all subjects from the Scopus database. The pattern for the specific arrangement of keywords was separated with the recovered results from the Scopus database, publication type, year of publication, distribution conveyance by nations, subject classes, association, authors, and financing organizations. It …

Framework For Collecting Data From Iot Device, Md Saiful Islam

Symposium of Student Scholars

The Internet of Things (IoT) is the most significant and blooming technology in the 21st century. IoT has rapidly developed by covering hundreds of applications in the civil, health, military, and agriculture areas. IoT is based on the collection of sensor data through an embedded system, and this embedded system uploads the data on the internet. Devices and sensor technologies connected over a network can monitor and measure data in real-time. The main challenge is to collect data from IoT devices, transmit them to store in the Cloud, and later retrieve them at any time for visualization and data analysis. …

Data Analysis Methods For Health Monitoring Sensors, Shahriar Sobhan

Symposium of Student Scholars

Innovations in health monitoring systems are fundamental for the continuous improvement of remote healthcare. With the current presence of SARS-CoV-2, better known as COVID-19, in people’s daily lives, solutions for monitoring heart and especially respiration and pulmonary functions are more needed than ever. Besides, health monitoring systems are widely used for patients who need isolated care, unconscious patients who cannot get medical attention for themselves. As it is well-known, monitoring systems rely on sensor technologies. Currently, there are multiple research studies for remote monitoring using different types of sensors. In this effort, we survey the current approaches that utilize the …

Open Source Vacuum Oven Design For Low-Temperature Drying: Performance Evaluation For Recycled Pet And Biomass, Benjamin R. Hubbard, Lindsay I. Putman, Stephen Techtmann, Joshua M. Pearce

Michigan Tech Publications, Part 1

Vacuum drying can dehydrate materials further than dry heat methods, while protecting sensitive materials from thermal degradation. Many industries have shifted to vacuum drying as cost-or time-saving measures. Small-scale vacuum drying, however, has been limited by the high costs of specialty scientific tools. To make vacuum drying more accessible, this study provides design and performance information for a small-scale open source vacuum oven, which can be fabricated from off-the-shelf and 3-D printed components. The oven is tested for drying speed and effectiveness on both waste plastic polyethylene terephthalate (PET) and a consortium of bacteria developed for bioprocessing of terephthalate wastes …

2050 Integrated Resource Plan For Public Services Company Of Colorado, Rehana Aziz, Josh Litwin

Master's Projects and Capstones

Our IRP aims to determine the optimal resource mix that will meet the forecasted load in 2030, 2040, and 2050. This report models a Reference or “business-as-usual” case and four alternative scenarios that deploy renewable energy resources or carbon capture technologies at varying levels to meet load at the beginning of each of these three decades. We assumed zero-carbon emissions targets for all four alternative scenarios, which go above and beyond Colorado’s current RPS. We are also retiring coal before 2040 for all four alternative scenarios in alignment with Xcel’s current plan.

The forecasted load in the Reference scenario is …

Multilayer Perceptron With Auto Encoder Enabled Deep Learning Model For Recommender Systems, Subhashini Narayan

Future Computing and Informatics Journal

In this modern world of ever-increasing one-click purchases, movie bookings, music, health- care, fashion, the need for recommendations have increased the more. Google, Netflix, Spotify, Amazon and other tech giants use recommendations to customize and tailor their search engines to suit the user’s interests. Many of the existing systems are based on older algorithms which although have decent accuracies, require large training and testing datasets and with the emergence of deep learning, the accuracy of algorithms has further improved, and error rates have reduced due to the use of multiple layers. The need for large datasets has declined as well. …

Deep Feature Learning For Fog Episodes Prediction In Patients With Pd, Hadeer Elziaat, Nashwa El-Bendary, Ramdan Mowad

Future Computing and Informatics Journal

A common symptom of Parkinson's Disease is Freezing of Gait (FoG) that causes an interrupt of the forward progression of the patient’s feet while walking. Therefore, Freezing of Gait episodes is always engaged to the patient's falls. This paper proposes a model for Freezing of Gait episodes detection and prediction in patients with Parkinson's Disease. Predicting Freezing of Gait in this paper considers as a multi-class classification problem with 3 classes namely, FoG, pre-FoG, and walking episodes. In this paper, the extracted feature scheme applied for the detection and the prediction of FoG is Convolutional Neural Network (CNN) spectrogram time-frequency …

A Study Of Hygrometer Based On The Method Of Intracavity Laser Absorption, Abdulaziz Muminovich Nazarov Prof, Mirkomil Mirhidoyat Ogli Xasanov

Chemical Technology, Control and Management

The article presents the results of experimental studies of a fiber-optic humidity sensor, the principle of operation of which is based on the method of intracavity laser absorption. A method of intracavity laser absorption is described, which makes it possible to dramatically increase the sensitivity of the fiber humidity sensor by switching to it. A schematic diagram of a fiber optical humidity sensor using a differential detection scheme and a design of an active ring laser fiber consisting of a diode pump laser, a fiber pump beam splitter, two directional couplers, a measuring ring laser, a ring comparison laser, two …

Application Of The Ultrasonic Generator In The Extractor And Determination Of Its Energy Consumption, Shaxnoza Abduvaxitovna Sultanova, Jasur Esirgapovich Safarov, Azamat Usenov, Doston Ishmuhammat Ogli Samandarov

Chemical Technology, Control and Management

An ultrasonic generator was used in the Soxhlet extractor. To evaluate the process, the solvent flow was examined. The influence of the flow time in the Soxhlet on the process was analyzed. The formula for the residence time of streaming particles in the apparatus is given. A standardized volume curve V was formed. The time required for the solvent to remain in the apparatus is important during the extraction process. The description of the structure of flows of mass metabolic processes also means that it allows you to determine the movement and distribution of substances in these flows. Therefore, we …

Main Stages Of Automated System Of Processes For Determining And Ensuring Functional And Parametric Compatibility Of Production And Technological Systems, Sarvar Botir Ugli Nabiyev

Chemical Technology, Control and Management

This article presents the main stages of the development of an automated system of processes for determining and ensuring functional and parametric compatibility (FPC) of components of production and technological systems (PTS), in particular production and technological modules (PTM) of machine-building production, respectively, based on the analysis and systematization of technological zones of loading of the main technological equipment (MTE) and the construction of coating surfaces, the main parameters of industrial robots and storage systems (SS), determination and mathematical formalization of coating surfaces and guiding planes of MTE loading zones, formation of types of analytical dependences of FPC PTM functions, …

Errors Of Universal Contactless Converters Of Monitoring And Control Systems From External Magnetic Fields, A.M Plakhtiev, Gayratjon Gaziev, Yahyojon Meliboyev, Odil Doniyorov

Chemical Technology, Control and Management

In communication and communication devices, power equipment, relay protection and automation terminals, in the electric power industry of "smart" cities and homes, in industry, in railway transport, microprocessor-based relay protection and automation devices, distributed generation installations, including renewable energy sources, and electricity storage, as well as "intelligent" automated information and measurement systems are beginning to be used. Contactless converters of direct and alternating currents of control and control systems are widely used in them. Their disadvantages are a narrow range of controlled currents, large dimensions and weight. Therefore, it is important to eliminate them. The paper discusses the general principles …

Improving The Accuracy Of Measuring The Volume And Mass Of Liquid Product In Horizontal Cylindrical Tanks, Nodirbek Rustambekovich Yusupbekov, Azamat Alijonovich Yusupov, Bobir Alisher Ogli Boronov

Chemical Technology, Control and Management

The article is devoted to improving the accuracy of the system for measuring and controlling the level of liquid materials in horizontal cylindrical tanks. The task of ensuring continuous accurate control of the level, volume and mass of petroleum products, taking into account the shape of the bottom of the tank, is set. In order to improve the accuracy of the measuring device, a laser rangefinder is installed, which allows you to determine the distance from the tank lid to the point of the surface level of the liquid product and calculate the volume of the liquid material by determining …

Development And Implementation Of Two-Dimensional Fault-Tolerant Programmable Logical Controllers, Azizbek Nodirbekovich Yusupbekov, Nodirjon Turgunboy Ugli Tulaganov, Khurshid Salim Ugli Turaev

Chemical Technology, Control and Management

It has been revealed that a significant part of industrial control systems designed for technological facilities with more than one input and one output and the most widespread are objects with two inputs and two outputs.The article describes the programming environment for fault-tolerant two-dimensional control systems using PID controller, which software is implemented in an environment for programmable logic controllers (PLC).An experimental testing system has been implemented and software settings and regulator settings have been considered. Real-time PID controllers and filters have been implemented. It has been implemented a variation of the control system software with object imitation.

Production Of Lime-Ammonium Nitrate Based On Chalk, Nitrate And Ammonium Sulfate, O.X. Rasulov, Abdurasul Mamataliyev, M.X. Dadaxodjaeva, Sh.S. Namazov, B.M. Beglov

Chemical Technology, Control and Management

The article studies the process of obtaining carbonate-ammonium nitrate (CAN) based on the mixing of melt ammonium nitrate (NH₄NO₃) with chalk (СаСО₃) and ammonium sulfate (NH₄)₂SO₄). For the granulation of nitrate-sulfate-carbonate melt the prilling method is applied using a granulation tower. Determined the composition and properties of new types of fertilizers. It is shown that with the ratio NH₄NO₃ : СаСО₃ : (NH₄)₂SO₄ = 100 : 24 : 1 the product contains 28,03% N, SO₃ – 0,50%, 10% …

Selection Of Mineral Raw Material Fields For Glauconite Sorption Materials, Diyor Xadjibayev, Furkat Ilyasovich Erkabaev

Chemical Technology, Control and Management

Natural minerals, such as bentonite, kaolinite, biotite, vermiculite, and glauconite, which have sufficiently high performance properties in the softening of industrial and waste water, softening and cleaning of heavy metals, are promising. To study the physical and chemical properties of glauconites from various deposits of the country, samples of glauconite mineral were brought from the Parkent, Bukhara, and Karakalpak mountain reserves, their physical and chemical properties were studied, compared with each other, and the optimal reserve was selected. The reserves of these deposits are sufficient and have the potential for industrial development. The purpose of this study is to compare …

Mathematic Simulation Of Glass Melting Process In Glass Production, Shuhrat Manapovich Gulyamov, Azamat Toirovich Rajabov, Utkir Uktam Ugli Kholmanov

Chemical Technology, Control and Management

A systematic analysis of the technological process of glass melting as an object of automatic control and management has been carried out. As an object of automatic control with distributed parameters, the mathematical description of the glassmaking furnace operation has been developed (considering the main phenomenological features of the technological mode of glassmaking).In this paper, a mathematical description of charge melting process, additional heating by electric current, bubbling, thermal conductivity and heat fluxes during the processing of molten glass have been generated. Initial conditions and simplifying assumptions have been derived. The model is based on the equations of continuity, momentum …

Algorithms Of System Synthesis For Stabilizing Uncertain Dynamic Objects, Uktam Farkhodovich Mamirov

Chemical Technology, Control and Management

The article deals with the formation of stable algorithms for the system synthesis for the stabilizing uncertain dynamic objects based on the method of local optimization in the presence of approximate mathematical models. The article analyzes the issues of building adaptive control systems using the concept of roughness, taking into account the assessment of the maximum allowable discrepancy between the object and its model. Some of the most constructive algorithms for determining pseudo-inverse matrices are given. When calculating the pseudo-inverse matrix of the control object, modified QR decomposition algorithms are used, obtained by deleting or assigning a column. The obtained …

Algorithms For Synthesis Of Discrete Controllers In Nonlinear Control Systems With Delay, Alisher Rajabaliyevich Mallayev, Suban Nurullayevich Xusanov

Chemical Technology, Control and Management

Algorithms for the synthesis of discrete controllers in nonlinear control systems, taking into account the delay, have been proposed. The synthesized vector controller provides a solution to the control problem, for example, the translation of the image point of a closed system from arbitrary initial conditions to the origin of the phase space coordinates. Built on the basis of a series-parallel set of invariant manifolds, the dynamic discrete controller ensures the fulfillment of the specified technological requirements, the asymptotic stability of a closed discrete-continuous system, and has the property of predicting the behavior of the system after sampling. These algorithms …