Electrical and Computer Engineering Commons^™

Optimized Insulation Design Of Power Transformer Windings Under Fast Voltage Pulses, Juan Manuel Villanueva Ramirez

Dissertations

Power transformers are essential electrical power system devices. Using the principle of electromagnetic induction, they can transfer electric energy between two otherwise isolated circuits, as well as reduce or increase voltage levels without modifying the frequency. This allows reduction of power losses when electric energy is transferred between power plants and consumers. Because of their importance and widespread use, transformers failures can have a severe economic impact due to the temporary interruption of electric service.

The insulation design of power transformers is performed by considering the maximum values of voltage or current to which the device will be exposed during …

Numerical Analysis Of Radiation Effects On Fiber Optic Sensors, Sohel Rana, Harish Subbaraman, Austin Fleming, Nirmala Kandadai

Electrical and Computer Engineering Faculty Publications and Presentations

Optical fiber sensors (OFS) are a potential candidate for monitoring physical parameters in nuclear environments. However, under an irradiation field the optical response of the OFS is modified via three primary mechanisms: (i) radiation-induced attenuation (RIA), (ii) radiation-induced emission (RIE), and (iii) radiation-induced compaction (RIC). For resonance-based sensors, RIC plays a significant role in modifying their performance characteristics. In this paper, we numerically investigate independently the effects of RIC and RIA on three types of OFS widely considered for radiation environments: fiber Bragg grating (FBG), long-period grating (LPG), and Fabry-Perot (F-P) sensors. In our RIC modeling, experimentally calculated refractive index …

Pier Ocean Pier, Brandon J. Nowak

Computer Engineering

Pier Ocean Peer is a weatherproof box containing a Jetson Nano, connected to a cell modem and camera, and powered by a Lithium Iron Phosphate battery charged by a 50W solar panel. This system can currently provide photos to monitor the harbor seal population that likes to haul out at the base of the Cal Poly Pier, but more importantly it provides a platform for future expansion by other students either though adding new sensors directly to the Jetson Nano or by connecting to the jetson nano remotely through a wireless protocol of their choice.

Pilltank, Lucas Chang, Hayden Tam, Aaron Teh, Krista Round

Electrical Engineering

Imagine an elderly family member, going through their daily routine of taking their pills. They find their pill box; however, they are having trouble identifying all the pills in there. Is there a name on the tablet? Can they read what it says? Do they just trust that the medication in their box is correct? How can they properly take care of themselves if they can not even confirm that what they are taking is the right medication? To combat this issue that many face, we present PillTank.

To decrease the risk of consuming the wrong medication, PillTank identifies the …

Development Of A Low-Cost Hybrid Music Synthesizer, Spencer Rollins Drewry

Electrical Engineering

Until recently, affordable music equipment has always been seen as “budget”, providing a poor user experience. Inexpensive equipment was plagued with audible noise, signal integrity issues, and convoluted user interfaces. Companies like Teenage Engineering have proven that this does not have to be the case, in 2019 introducing their "Pocket Operator” series for $89. Due to the modern availability of low cost, high quality, consumer off the shelf [COTS] analog and digital components as well as creative engineering, the quality of inexpensive audio equipment has increased significantly. Despite these industry advances, the market is relatively small and shows a great …

Dc-Dc Buck Boost Converter Using The Lt8390 Controller And Gan High Electron Mobility Transistors, Juan Manuel Urbano Jr, Brian Thongchai Keokot

Electrical Engineering

California Polytechnic State University, San Luis Obispo’s ongoing Energy Harvesting from Exercise Machines (EHFEM) project creates a sustainable energy source by converting physical exercise from exercise machines into renewable electricity. Implementing energy harvesting technology into the Recreation Center’s exercise machines helps Cal Poly make progress on its goal of carbon neutrality by 2050 [1]. An improvement to the system with new technology increases Cal Poly Recreation Center’s ability to save money and improve sustainability.

The focus of this project improves the design of Nicholas Serres, who used the LT8390 controller in his buck boost DC-DC converter [2]. This project improves …

Wildfire Early Detection System (Weds), Mason Mciver, Vincent Liang, Jeanreno Racines

Electrical Engineering

With climate change causing an increase in temperature over the past several decades, wildfires have been burning hotter and moving quicker leaving a trail of destruction in their path. Detecting a wildfire early allows firefighters to respond efficiently and effectively to ensure containment. With the rise of advanced computer vision and algorithms, autonomous systems can be used to monitor and report any fire activity. Having multiple devices spread out across a large area will allow first responders to map out the fire location and track the fire. By utilizing smart technologies, property damage can be minimized and residents living in …

Robot Path Planning System, Filippo Cheein, Tim Berry, Bruce Rogstad, Bob Entezar, Jamari Ducre

Electrical Engineering

The future is autonomous. It is estimated that by 2025 there will be 8 million autonomous cars in the market. Millions more will be autonomous devices employed in homes, malls, offices, and warehouses. There are many aspects of these future devices that are necessary for proper autonomous functionality, with none potentially more critical than the devices’ path planning ability. This project aims to create an effective, reliable, and safe path planning algorithm for the autonomous devices of the future. Indoor autonomous devices, such as warehouse or office robots, benefit from being able to always use the same floor plan rather …

Probability Based Logic Locking On Integrated Circuits, Michael Yue

Electrical and Computer Engineering Master's Theses

The demand of integrated circuits (IC)s are increasing and the industry has outsourced the fabrication process to untrusted environments. An adversary at these untrusted facilities can reverse engineer parts of the IC to reveal the original design. IC piracy and overproduction are serious issues that threaten the security and integrity of a system. These ICs can be copied illegally and altered to contain malicious hardware. The pirated ICs can be placed in consumer products which may harm the system or leak sensitive information. Hardware obfuscation is a technique used to protect the original design before it gets fabricated, tested, assembled, …

First Order Self-Oscillating Class-D Circuit With Triangular Wave Injection, Matthew J. Carroll

Master's Theses

An investigation into performance improvements to the modulator stage of a class-D amplifier is conducted in this thesis. Two of the standard topologies, namely class-D open-loop pulse-width modulation (PWM), and the improved self-oscillating feedback system are benchmarked against a topology which includes both a hysteretic comparator in a feedback loop and triangle wave injection. Circuit performance is analyzed by comparing how the triangle injection circuit handles known issues with open-loop and self-oscillating circuits. Using this analysis, it is shown that the triangle injection topology offers an improved power supply rejection ratio relative to open-loop PWM and reduces distortion generated by …

Design And Modeling Of A Distributed Network For The Dc House Project, Lauren N. Rotsios

Master's Theses

This thesis covers the design and simulation of a model for a distributed network of DC Houses in MATLAB Simulink. The model will allow for sharing of power between houses within the network. The developed model consists of five separate DC House branches with local power generation. Each branch consists of a PV MPPT charge controller subsystem, a resistive load, and a bidirectional buck-boost converter subsystem. The high voltage side of every bidirectional buck-boost converter is connected together through the transmission line at a single high voltage DC bus. The performance of the individual components of the model is verified …

Scalable Cognitive Radio Network Testbed In Real Time, Kevin Z. Yu

Master's Theses

Modern society places an increasingly high demand on data transmission. Much of that data transmission takes place through communication over the frequency spectrum. The channels on the spectrum are limited resources. Researchers realize that at certain times of day some channels are overloaded, while others are not being fully utilized. A spectrum management system may be beneficial to remedy this efficiency issue. One of the proposed systems, Cognitive Radio Network (CRN), has progressed over the years thanks to studies on a wide range of subjects, including geolocation, data throughput rate, and channel handoff selection algorithm, which provide fundamental support for …

Zero Voltage Switching Hybrid Voltage Divider Converter, Timothy Jeong

Master's Theses

This project proposes a new hybrid voltage divider DC-DC converter that utilizes switching capacitors and inductors to produce zero voltage switching (ZVS) at the turn on state of its switches. By achieving ZVS, the switching losses are significantly reduced; thus, increasing the overall efficiency of the converter at various loads. The goal for this thesis is to perform analysis of the operation of the converter, derive equations for sizing the main components, and demonstrate its functionality through computer simulation and hardware prototype. Results of the simulation and hardware testing show that the proposed converter produces the desired output voltage while …

On The Design Of Coreless Permanent Magnet Machines For Electric Aircraft Propulsion, Damien Lawhorn, Peng Han, Donovin Lewis, Yaser Chulaee, Dan M. Ionel

Power and Energy Institute of Kentucky Faculty Publications

This paper presents design and prototyping studies for coreless and slotless permanent magnet (PM) machines, which have the potential for high power density and efficiency, and discusses their feasibility for electric aircraft propulsion. The emphasis is on axial flux permanent magnet (AFPM) machines with printed circuit board (PCB) stators that have advantages over their wired counterparts in terms of design flexibility, coil accuracy, manufacturing process reliability, and heat dissipation. Detailed electromagnetic finite element analysis models were developed and employed alongside analytical sizing equations to evaluate the performance of two dual-rotor single-stator coreless AFPM designs employing wave and spiral PCB winding …

Combined Use Of Ev Batteries And Pv Systems For Improving Building Resilience To Blackouts, Huangjie Gong, Dan M. Ionel

Power and Energy Institute of Kentucky Faculty Publications

Californian residencies face increased risk of blackout. The state depends more on imported electricity that may not always be available to fill the gap between renewable generation and demand. For buildings with PV panels, storing the surplus solar power to support the load during a blackout can be achieved with a large energy storage system (ESS). The electric vehicle (EV) provides potential solutions as it can expand the energy capacity of the residential ESS with its battery. In this paper, a reference house in California was modeled in EnergyPlus. The building resilience for a house with different load percentages were …

Manganese Oxide Carbon-Based Nanocomposite In Energy Storage Applications, Mulugeta Wayu

Chemistry Faculty Research

Global increasing demand in the need of energy leads to the development of non-conventional, high power energy sources. Supercapacitors (SCs) are one of the typical non-conventional energy storage devices which are based on the principle of electrochemical energy conversion. SCs are promising energy storage devices for better future energy technology. Increasing progress has been made in the development of applied and fundamental aspects of SCs. Manganese oxide electrode materials have been well studied; however, their capacitive performance is still inadequate for practical applications. Recent research is mainly focused on enhancing manganese oxide capacitive performance through the incorporation of electrically conductive …

Power Line Coupling Power Supply Design, Janine Gian Christii C. Darato, Jeni K. Kawate, Nicholas A. Marta

Electrical Engineering

In this project, a power supply was designed for a startup company, Perch Sensing, to detect wildfires with the use of distributed sensors across power lines. The purpose of the power supply is to provide 15W of power to a microcontroller, which controls the sensor nodes. The power supply hangs from power lines and draws energy by inductively coupling to these lines. Our design starts with a current transformer that steps down the current from the power line, which is fed into a shunting mechanism as a safety precaution when the load is absent, then to the power supply itself. …

Buck Converter With Voltage Foldback Protection, Fabian Aaron Enriquez, Pedro Rincon Rosales

Electrical Engineering

In this work, we implemented the idea of current foldback protection onto a buck converter. Current foldback protection essentially helps reduce the power dissipation which may be caused by a short circuit or overload scenario. To achieve the goal of this project, we used a combination of comparators, operational amplifiers and MOSFETs to create a current foldback sub controller. This controller would then serve as a feedback device between the output of the converter and the main controller to detect if a fault condition has occurred. Following the design, we performed simulation of the current foldback controller using PSpice and …

Portable Ventilator, Bradley C. Weeks, Jack W. Brewer, Sanders Sanabria

Electrical Engineering

The current COVID-19 pandemic has heavily impacted the healthcare system in the United States and elsewhere. The need for patients to have access to a hospital with a ventilator along with a shortage of ventilators for recovery and at-home care as a result of minimal hospital vacancy for patients has been greatly stressed. The presented problem is both an unmet demand and supply of portable and effective ventilators. Existing ventilators have many shortcomings that should be addressed: size, weight, cost, and complexity of current ventilators confines users to stay in a medical facility whilst being monitored by professionals. This both …

Automated Cornhole Score Keeping System, Dominic J. Mingione, Jason D. Chandler

Electrical Engineering

Due to the confusing scoring system and rules of the popular lawn game cornhole, many novice and avid players have difficulty accurately keeping score on a consistent basis. To alleviate this problem, the Automated Cornhole Score Keeping System implements technology that eliminates the need to keep score manually in a game of cornhole. Two cornhole boards, configured with the score keeping system, are able to accurately keep score for both teams throughout the entirety of the game. Each score keeping system communicates through BLE, giving players access to the score of their game from an external scoreboard. Both boards are …

Medical Signal Recognition System Based On Machine Learning, Deep Learning, And Internet Of Things, Arwa Hameed Mohammed Taqi

Theses and Dissertations

Internet of Things (IoT) technology is becoming increasingly common in the healthcare industry. The significant benefits of IoT are decreased operational costs, improved outcomes of the treatment through virtual infrastructures and accessibility of real-time information for making informed decisions, improved disease management, reduced errors, and enhanced patient experience. This enables hospitals to address the demands of the ever-growing population in this world. On the other hand, medical signal classification systems are systems that recognize normal from abnormal medical signals. These systems depend on two modes, training mode in which the system learns about the dominant features of the signals, and …

Design And Fabrication Of Zinc Oxide Optofluidic Laser Elements, Kyle T. Bodily

Theses and Dissertations

This thesis systematically goes through the derivation, simulation, and experimentation of Zinc Oxide optofluidic micro laser elements. Single and coupled ring resonators were simulated to show single mode transmission as well as enhanced coupling capabilities when surrounded by high refractive index liquid. Devices with diameters ranging from 100-500 µm were successfully fabricated inexpensively through standard cleanroom procedures. The devices were tested using two different pump laser systems. Testing included such factors as high pump intensity, various angles of excitation, and low temperature. In all cases PL emission was observed and recorded.

Feasibility Study Of Radio Frequency Microelectromechanical Filters For Space Operation, Karanvir Singh

Theses and Dissertations

Piezoelectric contour mode resonator technology has the unique advantage of combining low motional resistance with the ability to define multiple frequencies on the same substrate. Contour mode resonators can be mechanically coupled together to form robust band-pass filters for the next generation of GPS satellites with extreme size reduction compared to electrically coupled filters. Piezoelectric zinc oxide (ZnO) contour mode resonators have the potential for monolithic integration with current ZnO transistor further reducing size, power consumption, and cost of filter modules. Barium strontium titanate (BST) contour mode resonators have incredible frequency tunability due to the fundamental nature of the thin …

Sar Collection Planning And Data Quality Assessment, Jacob M. Brumfield

Theses and Dissertations

Radar resource management is an important research topic in the radar community. Identifying the performance of a synthetic aperture radar image early into a data processing chain can improve intelligence collection mission performance. To achieve that goal, separate flags can be presented to a radar technician along a data processing chain to identify various errors within a data collection. Toward the end, this thesis analyzes he radar image processing chain and identifies data quality checks that could be implemented. The first quality check is to identify canonical targets and the necessary Nyquist-Shannon sampling requirements. Then, observations can be made to …

Ai Alzheimer's Early Detection Via Mri Processing, Luke Frey, Siddharth Sharma, Arti Jain

Electrical Engineering

Alzheimer’s Disease (AD) is an irreversible, progressive brain disorder that impairs memory, thinking, and language. Known as the most common form of dementia, AD is the 6th leading cause of death in the United States. It is estimated that currently, nearly 6 million Americans suffer from AD and moreover, the prevalence of AD is projected to grow to 13.8 million being diagnosed by 2050. Considering these projections, hospitals are expected to be diagnosing nearly half a million patients a year. This high volume will lead to technological growth within the diagnosis process along with more effective treatments.

As of now, …

Survey And Design Of Microwave Low-Noise Amplifiers, Omri Yaari, Pavin Virdee

Electrical Engineering

This project is a contest entry in the Wide In-band Receiver area of the 2020 International Microwave Symposium, 5G Low Noise Amplifier Competition [1]. The project includes RF transistor selection, single, two-stage, and cascode models, and RF parameter optimization to maximize the IMS Competition figure of merit along with a supplemental figure of merit [2]. 5G technologies (used in cellphones, IoT, etc.), first introduced in 2018, are on the rise in current society. Fifth generation hardware requires extended capabilities in comparison to 4G (5-20MHz bandwidth EU: 0.6-2.6GHz), including the newly allocated sub 6GHz frequency bands (EU: 3.4-3.8GHz) and wider bandwidth …

Solar Pv Emulator, Tristan Studer, Cody Kremer

Electrical Engineering

The implementation of a solar PV emulator. Creating a controllable testing environment which sufficiently recreates realistic conditions a photovoltaic cell would experience in real world use. The project aims to accurately show the efficiency and reliability of a solar PV cell, opposed to an ideal model which creates unrealistic expectations. The PV emulator implements conditions such as: irradiance, soiling and temperate changes. It gives feedback on a displayed IV curve and/or PV curve so the user may graphically analyze the output their PV cell produces given various conditions. It allows the user selectable conditions the solar cell may experience this …

Solar Photovoltaic Iv Curve Tracer, Jonathan W. Skelly

Electrical Engineering

The Solar Photovoltaic Current-Voltage (IV) Curve Tracer, sponsored by Cal Poly Professor Dale Dolan, characterizes solar array current vs. voltage curves for any given temperature and irradiance. The curve tracer is battery powered, and functions autonomously across loading conditions from short circuit to open load on any sub-450-watt solar array. The curve tracer supports separate data logging modes for both single cells and single modules to maximize data accuracy for each. For testing full strings of solar panels, up to 10 IV curves may be stored in persistent EEPROM memory. Stored data may be recalled later for output to a …

Optimization Of Single Axis Tracker Settings In The Cal Poly Goldtree Solar Farm, Charles A. Studdard, Liliana Reyes

Electrical Engineering

Solar farms use direct sunlight when operating; additionally, solar modules produce the most energy aligned perpendicular to the sun. Single axis solar tracking systems allow the rotation tilted photovoltaic panels to rotate during the day, maintaining the panels at the utmost efficiency angle. Achieving maximum power generation and reducing shade on the panels, make it crucial to have constant optimum positioning. Larger farms contain multiple rows and columns leading the panels to cast shadows on one another. Backtracking happens when you eliminate or reduce shadow casted on panels from adjacent modules. Panels positioned equidistantly and on even terrain allows backtracking …

Led-Based Solar Simulator, Jonathan E. Honrada

Electrical Engineering

Solar simulators are great laboratory tools that help users conduct tests with solar cells indoors. Conventional solar simulators typically use xenon arc bulbs as a light source, which can have considerable disadvantages. Recent projects have sought to design and implement LED-based solar simulators, as they are more power-efficient, inexpensive, and durable.

Based on these advantages, the goal of this project is to create an LED-based solar simulator that can replicate the characteristics of solar light, but also be tunable with controls. This broadens the testing capabilities of the device, allowing users to conduct tests with more narrow spectrums of light …