Electrical and Computer Engineering Commons^™

A Digital Calibration Source For 21 Cm Cosmology Telescopes, Kalyani Balkrishna Bhopi

Graduate Theses, Dissertations, and Problem Reports (ETD)

Precise calibration of radio telescope beams and gains is a central requirement for 21 cm intensity mapping experiments, which aim to measure large scale cosmological structure through the redshifted emission line of neutral hydrogen. Bright astrophysical foregrounds dominate the sky at these frequencies, and separating them from the cosmological signal demands precise control over instrumental systematics, particularly the telescope beam and its frequency-dependent response. Existing aerial calibration sources are incoherent broadband emitters, detectable only as total power. They provide no direct phase information and suffer from poor sensitivity in low signal-to-noise regimes.

We present the Precision Emitter for 21cm Array …

Modeling Rank Distribution And The Relative Importance Factor Index In Discrete Power-Law Models: Application To Social Resilience Using The Scopus Database, Brian Llinas, Jose Padilla, Humberto Llinas, Erika Frydenlund, Katherine Palacio

VMASC Publications

Prior research on power-law distributions has primarily focused on modeling frequency patterns, with less attention given to rank distributions and how ranked positions reflect relative importance among elements. In discrete power-law distributions, frequency-based metrics often provide limited discrimination in the tail, where elements may exhibit similar counts but differ in relative dominance. These patterns are especially evident, for instance, in academic publishing, where keywords, affiliations, and citations commonly exhibit power-law behavior. To address this limitation, we introduce the Relative Importance Factor (RIF) Index, a statistical measure derived from the estimated discrete power-law rank distribution rather than an additional independent parameter. …

Element-Based Predictive Modeling Of Hydrothermal Liquefaction Bioproducts Derived From Corn Stover, Isamu Umeda, Meicen Liu, Yi Zheng, Jiefu Wang, Zhiwu Wang, Sandeep Kumar

Civil & Environmental Engineering Faculty Publications

The hydrothermal liquefaction (HTL) process offers an energetic advantage over pyrolysis because it does not require prior drying of the biomass feedstock. However, there are significant challenges in simultaneously estimating both the yields and characteristics of products from the HTL of biomass with theoretical support. This study developed a unique element-based kinetic model to predict the yields, higher heating values, and fuel characteristics of solid residue and heavy bio-oil, based on the temperature, residence time, solid loading, and elemental composition (C, H, N, and O) of corn stover. Furthermore, the model predicted the weights of dissolved carbon and nitrogen in …

Electron Beam Irradiation Effects On Bulk Metals: A Comparative Study Of Polycrystalline Versus Single-Crystalline Structures, A. A. Elmustafa, N. A. Sultana, A. H. Al-Allaq, M. Ojha, Y. S. Mohammed, J. Vennekate, H. Baumgart

Mechanical & Aerospace Engineering Faculty Publications

This study investigates the effects of electron beam (e-beam) irradiation on the mechanical and structural properties of eight bulk metallic samples, comprising both polycrystalline (PC) and single-crystalline (SC) forms of Ni, Cr, V, and Ti. These metals were evaluated as potential candidates for beam exit windows in high-power (MW-class) particle accelerators. The primary objective is to identify metals capable of withstanding the conditions of high-power/MW-class e-beam accelerators and serve effectively as exit windows. Selection criteria were based on each metal’s intrinsic properties, power dissipation capability, and irradiation-induced changes in mechanical behavior, including hardness, elastic modulus, and defect density. Comprehensive characterization …

From Comparison To Integration: Building Energy Simulation Tool Variability And The Case For Intelligent Retrofit Workflows, Amir Safari, Dalya Ismael, Mahsa Safari, James Freihaut

Engineering Technology Faculty Publications

As the urgency to address climate change and modernize energy infrastructure grows, the building sector plays a key role in improving energy efficiency and reducing carbon emissions. This study evaluates five energy retrofit strategies for Building 101 at The Navy Yard in Philadelphia, comparing two real-world proposals from energy service companies with three simulation-based packages derived from Building Energy Simulation (BES) tools. The study examined whether advanced BES tools provide greater accuracy and decision-making value compared to simpler alternatives. Electricity savings ranged from 5 % to 40 %, gas savings from 29.7 % to 61 %, and annual cost reductions …

Generative Ai And Llm Applications In Renewable Energy And Smart Grids: A Systematic Review For The Sustainable Energy Transition, Umit Cali, Ugur Halden, Merlinda Andoni, Ferhat Ozgur Catak, Si Chen, Benoit Couraud, Emre Kantar, Samuel Knapper, Ibrahim Kucukdemiral, Huseyin Kusetogullari, Murat Kuzlu, Yashar Mousavi, Sonam Norbu, Taha Selim Ustun, David Flynn

Engineering Technology Faculty Publications

The global energy transition toward decarbonization and digitalization requires advanced methods to manage decentralized, data-intensive cyber-physical energy systems. This systematic review analyzes 106 research studies on Generative Artificial Intelligence (GenAI) and Large Language Models (LLMs) in renewable energy and smart grids, organized into seven application clusters covering forecasting, system design, operation, reliability, data and cybersecurity, and energy markets. The review situates these applications within a Cyber-Physical-Social Systems (CPSS) framework. Results show that GANs dominate current applications (47.2%), followed by LLMs (10.4%) and VAEs (9.4%), with growing adoption of diffusion and score-based models (7.5% each). Selected studies report improved probabilistic forecasting …

Improving Medical Diagnostics With Vision-Language Models: Convex Hull-Based Uncertainty Analysis, Ferhat Ozgur Catak, Murat Kuzlu, Taylor Patrick, Michel Audette

Engineering Technology Faculty Publications

In recent years, vision-language models (VLMs) have been applied to various fields, including healthcare, education, finance, and manufacturing, with remarkable performance. However, concerns remain regarding VLMs’ consistency and uncertainty, particularly in critical applications such as healthcare, which demand a high level of trust and reliability. This paper proposes a novel approach to evaluate uncertainty in VLMs’ responses using a convex hull approach on a healthcare application for visual question answering (VQA). For any VLM, temperature refers to a sampling parameter used in probabilistic generation, which controls the randomness of the model’s output. The LLM-CXR model is selected as the medical …

Adaptive Multi-Grade Deep Learning For Highly Oscillatory Fredholm Integral Equations Of The Second Kind, Jie Jiang, Yuesheng Xu

Mathematics & Statistics Faculty Publications

This paper studies the use of Multi-Grade Deep Learning (MGDL) for solving highly oscillatory Fredholm integral equations of the second kind. We provide rigorous error analyses of continuous and discrete MGDL models, showing that the discrete model retains the convergence and stability of its continuous counterpart under sufficiently small quadrature error. We identify the DNN training error as the primary source of approximation error, motivating a novel adaptive MGDL algorithm that selects the network grade based on training performance. Numerical experiments with highly oscillatory (including wavenumber 500) and singular solutions confirm the accuracy, effectiveness and robustness of the proposed approach.

Control System Emendation And Ai-Driven Optimization For Enhancing A Smart Residential Microgrid, Anthony Nyoyoko

Master’s Theses

This thesis began with a simple idea: to restore the control system of a smart residential microgrid to respond intelligently to electricity prices while remaining safe, reliable, and practical on low-cost hardware. At the start, the goal was to design an economically aware microgrid that could look at electricity prices from the PJM market and make better operational decisions than traditional rule-based control. The motivation was straightforward. As residential renewable energy adoption increases, microgrids are expected to do more than just supply power. They are expected to respond to price volatility, integrate renewable generation, and operate reliably using embedded controllers …

Dynamic Direct Voltage Control Under Maximum Torque Per Ampere For Interior Pmsms, Mohamad Alzayed, Hicham Chaoui, Alaref Elhaj

Electrical & Computer Engineering Faculty Publications

A novel method for controlling the speed of interior permanent magnet synchronous motors (IPMSMs), known as the current-sensing-based dynamic direct voltage control method under the maximum torque per ampere (MTPA) concept, is introduced. This technique achieves precise tracking of machine velocity by determining the optimal combination of voltage amplitude and angle for each specific motor velocity and current/load condition. Unlike previous studies, this approach takes into account the transient model of the machine, resulting in improved accuracy during dynamic operating conditions compared with existing methods in the literature. Moreover, a comparative analysis is conducted involving different direct voltage MTPA speed …

Qubit Lattice Algorithm Simulations Of The Scattering Of A Bounded Two Dimensional Electromagnetic Pulse From The Infinite Planar Dielectric Interface, Min Soe, George Vahala, Linda Vahala, Efstratios Koukoutsis, Abhay K. Ram, Kyriakos Hizanidis

Electrical & Computer Engineering Faculty Publications

Qubit lattice algorithm (QLA) simulations are performed for a two-dimensional spatially bounded pulse propagating onto a plane interface between two dielectric slabs. QLA is an initial value scheme that consists of a sequence of unitary collision and streaming operators, with appropriate potential operators, that recover Maxwell equations in inhomogeneous dielectric media to the second order in the lattice discreteness. For the case of total internal reflection, there is transient energy transfer into the second medium due to the evanescent fields as the Poynting unit vector of the pulse is rotated from its incident to reflected direction. Because of the finite …

Beyond The Square Pulse: Waveform Shape, Eeg Correlates, And The Pursuit Of Natural Sensation In Tens, Jason Whitson

Honors Undergraduate Theses

This study investigates the relationship between electrical stimulus characteristics of shape and charge on evoked sensations and electroencephalogram (EEG) data during multi-waveform transcutaneous electrical nerve stimulation (TENS) of the median nerve. Neuromodulation methods have traditionally had little control over the location and quality of their associated evoked sensation (e.g., electric, vibration, touch). This experiment utilized five unique stimulus waveforms during TENS stimulation. EEG data were collected concurrently to provide an introductory objective measure of the neural responses underlying these sensory changes. Eleven participants completed three tasks (thresholding, super-threshold stimulation, two-alternative forced choice) using a two-electrode TENS approach. Stimulus waveforms were …

Performance Evaluation Of Thick Carbon Fiber-Reinforced Laminates Manufactured Using Six-Magnetron Microwave System, Nayan Pundhir, Sourav Bolar, Kumbla Chandrashekhara, Kristen Donnell, Jim Lua, Kalyan Shrestha, Rui Li

Mechanical and Aerospace Engineering Faculty Research & Creative Works

Microwave curing is a fast, energy-efficient, and a viable alternative to conventional thermal curing processes. It has been widely adopted for processing carbon fiber-reinforced polymer composites because the high electrical conductivity of carbon fibers enables strong microwave coupling. In this study, IM7/Cycom 5320-1 unidirectional prepreg has been used to fabricate 64-layer laminated composites. Symmetric cross-ply ([0°/90°]16S) and a quasi-isotropic ([45°/90°/−45°/0°]8S) layup have been investigated. A custom-built six-magnetron microwave applicator and an autoclave were employed to manufacture the composite panels. Degree of cure of the manufactured laminates was evaluated via differential scanning calorimetry. Interfacial bonding and porosity of the microwave-cured laminates …

Multi-Period Coordinated Planning Of Xfcs In Coupled Tn-Pdn Networks: Integrating Demand Charge Reduction And Pre-Existing Infrastructure, Waqas Ur Rehman, Siyuan Wang, Liheng Lv, Jonathan W. Kimball, Rui Bo

Electrical and Computer Engineering Faculty Research & Creative Works

The widespread adoption of electric vehicles (EVs) and transportation electrification is encumbered by two chief barriers: i) the limited driving range of EVs in the market today and ii) inadequate charging infrastructure support. This paper aims to address the latter bottleneck and proposes a strategic multi-period coordinated planning model to optimally site and size battery energy storage system (BESS) assisted extreme fast charging stations in a highway transportation network and solar systems in a power distribution network. The proposed approach accounts for pre-existing charging stations, the increasing EV penetration levels, decreasing technology costs, and technological advancements in the future and …

Temperature Compensation In Loop And Patch Fss Strain Sensors: Analysis And Experimental Validation, Swathi Muthyala Ramesh, Kristen M. Donnell

Electrical and Computer Engineering Faculty Research & Creative Works

Frequency selective surfaces (FSSs) are arrays of conductive elements or apertures that exhibit frequency-dependent reflection and transmission properties. Their electromagnetic response is influenced by geometry and environmental conditions, making them attractive for wireless strain-sensing applications. However, temperature variations can produce frequency shifts similar to those caused by strain, reducing measurement accuracy. This work investigates the effects of intrinsic temperature compensation on two common FSS unit cell geometries—loop and patch—through comprehensive simulation analysis. The results show that loop-based cells offer superior thermal stability, while patch-based cells provide greater strain sensitivity, illustrating the trade-off between thermal robustness and mechanical responsiveness. A patch-type …

Mitigating Hysteresis In Metal-Coated Fibers Via Optimized Thermal Treatment For Advanced Distributed High-Temperature Sensing Applications, Koustav Dey, Rony Kumer Saha, Bohong Zhang, S. Narasimman, Farhan Mumtaz, Jeffrey D. Smith, Rex E. Gerald, Ronald J. O'Malley, Jie Huang

Electrical and Computer Engineering Faculty Research & Creative Works

Metal-coated optical fibers are widely employed in sensing applications owing to their superior mechanical strength and corrosion resistance. However, their calibration at elevated temperatures is hindered by hysteresis, manifested as discrepancies between heating and cooling cycles, primarily caused by residual strain from mismatched thermal expansion coefficients (TECs) between the metal coating and silica cladding. This research introduces an optimal heat treatment procedure aimed at minimizing the impact of the mismatch in TECs between the cladding and the coating materials that causes the residual strain in gold (Au) and copper (Cu) coated fibers for achieving reliable distributed high temperature sensing up …

Large Language Models For Neurology: A Mini Review, Donald C. Wunsch, Daniel B. Hier

Electrical and Computer Engineering Faculty Research & Creative Works

Large language models have the potential to transform neurology by augmenting diagnostic reasoning, streamlining documentation, and improving workflow efficiency. This Mini Review surveys emerging applications of large language models in Alzheimer's disease, Parkinson's disease, multiple sclerosis, and epilepsy, with emphasis on ambient documentation, multimodal data integration, and clinical decision support. Key barriers to adoption include bias, privacy, reliability, and regulatory alignment. Looking ahead, neurology-focused language models may develop greater fluency in biomedical ontologies and FHIR standards, improving data interoperability and supporting more seamless collaboration between clinicians and AI systems. Two future developments have the potential to be particularly impactful: (1) …

Multi-Parameter Optimization And Adaptive Temperature Compensation For Fbg Strain Sensors In Wide-Temperature-Range Aerospace Applications, Ruling Zhou, Jiacheng Yu, Yutang Dai, Jianguan Tang, Minghong Yang, Farhan Mumtaz

Electrical and Computer Engineering Faculty Research & Creative Works

Accurate strain measurement in cryogenic fuel pipelines is crucial for ensuring the structural integrity and reliability of rocket engine systems operating under extreme thermal conditions. Fiber Bragg grating (FBG) sensors show significant potential for such applications; however, their inherent temperature-strain cross-sensitivity limits performance over wide temperature ranges. This research presents an enhanced compensation strategy combining multi-parameter optimization with temperature-zone-specific adaptation to improve the accuracy and stability of FBG-based strain sensing in harsh aerospace environments. Four special steel substrate materials including S03, S06, S07, and 1Cr18Ni9Ti, were evaluated using strain transfer theory and thermo-mechanical coupling simulations. Genetic algorithms optimized key design …

Safe Optimal Control Framework For Cooperative Manipulation Of Objects In Human–Robot Teams, Irfan Ganie, Sarangapani Jagannathan

Electrical and Computer Engineering Faculty Research & Creative Works

This article introduces a distributed deep neural network (NN)-based adaptive control framework for cooperative object manipulation in human–robot teams with unknown agent dynamics by using three distinct multilayer NN observers (MNNOs). The first observer, termed the reference point estimator, enables each robotic agent to estimate the object's reference center using consensus-based learning, even without direct access to global reference trajectories. The second observer, referred to as the human force-to-trajectory estimator, uses human-applied forces to infer the intended position, velocity, and acceleration of the object, enabling real-time estimation of human intent. Together, these two observers allow distributed estimation of human-intended motion. …

Integrating Optical And Radiofrequency Interferometry For Enhanced Phase Sensing, Ruimin Jie, Zhaopeng Zhang, Chen Zhu, Jie Huang

Electrical and Computer Engineering Faculty Research & Creative Works

Interferometry is a crucial investigative technique used across diverse fields to achieve high-precision measurements. It works by analyzing the phase difference between two interfering waves, which results from variations in optical path lengths within an interferometer. We introduce a novel method for directly measuring changes in the phase difference within an optical interferometer, importantly, with the added advantage of a controllable enhancement factor. This approach is achieved through a two-step process: first, the optical phase difference is encoded into a sub-GHz radiofrequency (RF) signal using microwave-photonic manipulation; then, RF interferometry-assisted phase amplification is implemented at the destructive interference point. In …

Enhancing Measurement Accuracy: The Impact Of Missing Data On Parameter Estimation In Mass-Spring-Damper Systems, Michkath Omanda Bouraima, Steven Thompson, Maciej J. Zawodniok

Electrical and Computer Engineering Faculty Research & Creative Works

In sensor-driven dynamic systems, missing data can severely degrade parameter estimation accuracy. This article investigates the impact of missing data on phase estimation in a mass-spring-damper system using an information-theoretic framework based on the Cramér-Rao Lower Bound (CRLB). Closed-form CRLB expressions are derived for four scenarios: complete data, missing completely at random (MCAR) deletion, MCAR-based imputation, and missing at random (MAR) missingness via a selection-weighted formulation. These bounds are used as theoretical benchmarks to evaluate classical imputation methods (last observation carried forward (LOCF), linear interpolation) and advanced approaches (Kalman filtering, Rauch-Tung-Striebel (RTS) smoothing, Bayesian inference, and transformer-based imputation) through Monte …

Performance Analysis And Optimization Of Fructose Memristor-Based Neuromorphic Systems, Harshvardhan Uppaluru, Shakil Mahmud Jiban, Shah Zayed Riam, Feng Zhao, Jinhui Wang

Electrical and Computer Engineering Faculty Research & Creative Works

Natural organic memristors have demonstrated promising synaptic behavior, positioning them as strong candidates for synaptic devices in neuromorphic systems. This paper presents the fabrication and evaluation of a neuromorphic system based on natural organic 16-level and 32-level fructose memristors. First, the manufacturing process of fructose memristors is described in detail. Second, the nonlinear property associated with fructose memristors is investigated, and an optimization method is applied to address the nonlinear effects. The performance of the fructose memristor-based neuromorphic system on MNIST with a multi-layer perceptron and on CIFAR-10 with VGG-8 is evaluated and reported under various conditions -with/without nonlinearity optimization …

Online Lifelong Optimal Adaptive Control Of Partially Uncertain Strict Feedback Discrete-Time Systems With Application To Quadrotor Uavs, Maxwell Geiger, Sarangapani Jagannathan

Electrical and Computer Engineering Faculty Research & Creative Works

This article considers the infinite time horizon optimal adaptive tracking control of partially uncertain strict feedback discrete-time (DT) systems with application to quadrotor uncrewed aerial vehicles (UAVs). First, the strict feedback DT system is transformed into an equivalent affine nonlinear DT system in terms of the tracking error dynamics. The optimal adaptive tracking control problem is solved using an augmented system approach, where a horizon of future bounded reference trajectory points is used in the augmented state, when compared to using a single point. It is assumed that the internal dynamics of the strict feedback system are unknown, but the …

New Metrics For Disambiguating Feature Overlap And Catastrophic Forgetting In Incremental Learning Contexts, Niklas M. Melton, Leonardo Enzo Brito Da Silva, Donald C. Wunsch

Electrical and Computer Engineering Faculty Research & Creative Works

Catastrophic forgetting remains a central challenge in lifelong learning, where newly acquired knowledge interferes with previously learned tasks, degrading performance over time. Mitigation strategies such as rehearsal and regularization have been proposed, but both introduce limitations, either by retaining old data or by constraining model updates in ways that may impair learning. Complicating matters, recent findings show that feature-space overlap between tasks can produce similar performance drops even in models that memorize data, making it difficult to distinguish true forgetting from representational interference. Current accuracy-based metrics fail to disentangle these effects, undermining diagnostic clarity. In this work, we introduce the …

Fixed-Time Consensus Tracking For Nonlinear Multi-Agent Systems Under Aperiodically Intermittent Control, Lei Xue, Tong Wu, Wenwen Jia, Donald C. Wunsch

Electrical and Computer Engineering Faculty Research & Creative Works

This article explores the problem of fixed-time consensus tracking (FT-CT) for nonlinear multi-agent systems utilizing the a periodically intermittent control (AIC) strategy. In contrast to existing control algorithms, the proposed algorithm utilizes the AIC strategy instead of the conventional continuous-time control strategy, effectively reducing the consumption of communication resources. Moreover, the problem of intermittent FT-CT is well handled by proposing the average control rate of the AIC strategy. Two theorems based on the cases of directed and undirected graphs are proposed, respectively. Finally, the validity of these results is confirmed through numerical simulations on a general nonlinear system and a …

Rf-Attennet: A Hybrid Attention-Enhanced Network For Mixed Signal Classification In Uav Swarm Detection, Prajoy Podder, Mohammad Atikur Rahman, Maciej Zawodniok, Sanjay Madria

Electrical and Computer Engineering Faculty Research & Creative Works

The continuous increase of UAVs, particularly in swarms, creates significant challenges for security and airspace regulation. Traditional RF fingerprinting methods struggle to detect and classify UAV swarms due to overlapping signals and interference. This study introduces RF-AttenNet, a hybrid deep learning model designed to classify mixed UAV signals by analyzing composite RF spectrograms. RF-AttenNet uses dual attention mechanisms, channel and spatial attention to focus on critical spectral features, enabling the model to effectively separate and identify overlapping UAV signals. We have developed custom composite UAV datasets that simulate real-world swarm interference, incorporating both single and mixed UAV classes. RF-AttenNet achieves …

Effect Of Process Parameters On Thermal Response Of An Oxy-Fuel Burner/Injector Panel In An Electric Arc Furnace Via Fiber Optic Sensors, Mobashir Ahmed, Rony Kumer Saha, Koustav Dey, Todd Sander, Jie Huang, Ronald J. O'Malley

Electrical and Computer Engineering Faculty Research & Creative Works

Modern oxy-fuel burner/injectors in electric arc furnaces (EAFs) play a critical role in scrap melting, liquid steel refining, and slag foaming. However, varying operational modes, combined with dynamic process conditions, such as arcing and slag behavior, can expose the injector panel surface to intense thermal conditions that can compromise efficiency and safety. Conventional monitoring techniques, including cooling water temperature measurements and thermocouples, fail to capture localized thermal anomalies due to their limited spatial resolution and susceptibility to electromagnetic interference. In this study, four high-resolution Rayleigh backscattering-based fiber optic sensors, interrogated via optical frequency domain reflectometry, were embedded in top and …

Real-Time Multiregional Market-To-Market Congestion Management Through Exchange Of Relief Cost Curve, Haotian Chen, Yonghong Chen, Jose Daniel Lara, Jarrad Wright, Matthew Bossart, Sebastian De Jesus Machado, Rui Bo

Electrical and Computer Engineering Faculty Research & Creative Works

This paper introduces a novel method for multiregional market-to-market (M2M) coordinated congestion management. It identifies shortcomings in existing M2M approaches, where Regional Transmission Organizations (RTOs) exchange shadow prices and relief requests to optimize congestion relief allocations across interconnected regions. Two methods are proposed to enhance flow and price convergence. The first method proposes that both Regional Transmission Organizations (RTOs) use state-estimator flows directly to determine relief requirements, eliminating delays and potential oscillations caused by using market flows calculated from the prior period under existing M2M approach. The second method involves exchanging transmission relief cost curves, enabling each RTOs to integrate …

Sapphire Optical Fiber Bragg Grating Sensors Based On Dispersive Microwave-Photonic Frequency-Time Domain Analysis, Ruimin Jie, Chen Zhu, Farhan Mumtaz, Koustav Dey, Bohong Zhang, Jie Huang

Electrical and Computer Engineering Faculty Research & Creative Works

Sapphire fiber Bragg gratings (SFBGs) have attracted growing interest for high temperature sensing in harsh environments, yet their interrogation typically relies on optical spectrum measurements, demanding a high-resolution optical spectrum analyzer (OSA) that is bulky, expensive, and constrained in acquisition speed. Moreover, the inherently multimode nature of sapphire fiber further complicates spectrum-based demodulation, thereby limiting the achievable sensing resolution. In this paper, we propose and experimentally demonstrate a microwave-photonic interrogation approach for SFBG sensors. Instead of measuring the optical reflection spectrum, the complex frequency response in the microwave domain of an SFBG is acquired using a vector network analyzer (VNA) …

Honey-Cnt Memristive Artificial Synaptic Device For Sustainable Neuromorphic Computing System, Md Mehedi Hasan Tanim, Zoe Templin, Harshvardhan Uppaluru, Jinhui Wang, Kuan Yew Cheong, Feng Zhao

Electrical and Computer Engineering Faculty Research & Creative Works

Brain-inspired neuromorphic computing systems require hardware components analogous to biological neurons and synapses. Honey based natural organic memristor has demonstrated promising nonvolatile memristive behaviors, with the advantages of sustainability, environmentally friendliness, and low-cost manufacturing. In this study, carbon nanotubes (CNTs) are added in honey to fabricate honey-CNT memristive artificial synaptic devices. Honey-CNT film is characterized by micro-Raman spectroscopy and the distribution of CNT bundles embedded in the honey-CNT composite layer by cross-sectional scanning electron microscopy for the first time. Critical synaptic functions of the honey-CNT memristor, including spike-rate-dependent plasticity, spike voltage dependent plasticity, learn-forget-relearn, and supralinear spatial summation are revealed, …