Electrical and Computer Engineering Commons^™

Optimal Control Of Queueing Systems With Error-Prone Servers, Junqi Hu, Sigrún Andradóttir, Hayriye Ayhan

Information Technology & Decision Sciences Faculty Publications

Consider a Markovian tandem line with finite intermediate buffers and an equal number of stations and servers. Servers are flexible but noncollaborative, so that a job can be processed by at most one server at any time. When a job is being processed, it can be damaged and wasted depending on the proficiency of the server. We identify the dynamic server assignment policy that maximizes the long-run average throughput of the system with two stations and two servers. We find that the optimal policy is either a single or a double threshold policy on the number of jobs in the …

Modeling And Analysis Of Amorphous Steel Transformer For Potential Loss Reduction In Power Systems., Daniel A. Muchow

Theses and Dissertations--Electrical and Computer Engineering

The energy consumed in power systems can be reduced directly by implementing new technologies and materials. The effort to reduce the carbon emissions expelled from the production of electrical energy has become a major focus. According to the U.S. energy Information Administration approximately 5% of all the electric generated and transmitted in the U.S. electrical grid is lost. The energy profile calculated from the usage of electrical power from all 50 states in 2021 is estimated to be 3.8 billion megawatts per hour, with a state average of just over 11 cents per MWh, producing just over 41.8 billion in …

Analysis And Design Optimization Of Synchronous Machines With Excitation Through Stator Dc Coils Or Magnets And Reluctance Rotors, Oluwaseun A. Badewa

Theses and Dissertations--Electrical and Computer Engineering

The design and optimization of electric machines face increasing demands for higher efficiency, improved torque density, manufacturability, and effective utilization of materials, particularly in applications such as electric traction and propulsion, where performance, reliability, and cost are critical. This work explores innovative synchronous machine configurations with reluctance rotors and stator-combined excitation, including permanent magnet and DC-excited topologies, to address these challenges through advanced design methodologies, computational modeling, and experimental validation. This research is relevant to address the growing demand for high-performance electric machines that combine high power density with costeffective manufacturing. The conventional limitations in power and torque density, thermal …

Optimal Control And Structurally-Informed Gradient Optimization Of A Custom 4-Dof Rigid-Body, Brock Marcinczyk, Logan E. Beaver

Mechanical & Aerospace Engineering Faculty Publications

This work develops a control-centric framework for a custom 4-DOF rigid-body manipulator by coupling a reduced-order Pontryagin’s Maximum Principle (PMP) controller with a physics-informed Gradient Descent stage. The reduced PMP model provides a closed-form optimal control law for the joint accelerations, while the Gradient Descent module determines the corresponding time horizons by minimizing a cost functional built directly from the full Rigid-Body Dynamics. Structural-mechanics reaction analysis is used only to initialize feasible joint velocities—most critically the azimuthal component—ensuring that the optimizer begins in a physically admissible region. The resulting kinematic trajectories and dynamically consistent time horizons are then supplied to …

Faithful Narratives From Complex Conceptual Models: Should Modelers Or Large Language Models Simplify Causal Maps, Tyler J. Gandee, Philippe J. Giabbanelli

VMASC Publications

(1) Background: Comprehensive conceptual models can result in complex artifacts, consisting of many concepts that interact through multiple mechanisms. This complexity can be acceptable and even expected when generating rich models, for instance to support ensuing analyses that find central concepts or decompose models into parts that can be managed by different actors. However, complexity can become a barrier when the conceptual model is used directly by individuals. A ‘transparent’ model can support learning among stakeholders (e.g., in group model building) and it can motivate the adoption of specific interventions (i.e., using a model as evidence base). Although advances in …

Assessing Tidal Energy Potential In The Visayas: Viability Of The San Bernardino, San Juanico, And Cebu Straits, Justin Kyle O. Ricafort, King Harold A. Recto

Sustainability, Disaster Science and Energy

By laying the groundwork for sustainable tidal energy infrastructure, this study contributes to advancing the Philippines' renewable energy portfolio and supports the global transition to clean energy solutions. With the country's extensive coastline and rising energy demands, tidal energy presents a largely underutilized yet promising resource that can address both local and global energy challenges. Tidal energy is highly predictable, stable, and environmentally friendly, offering a reliable alternative to conventional energy sources like coal and natural gas, which are often subject to price volatility and environmental concerns. The study focuses on the Visayas region, a prime candidate for tidal energy …

Study Of Deep Neural Network Trained With Salient, Compressed Medical Video Data For Enhanced Predication, Aileen Sengupta

Electrical Engineering Dissertations - Archive

The rapid growth of surgical video analysis presents a need for efficient deep learning models for surgical training, while reducing the need for excessive image and video image storage. Traditional training approaches typically rely on uniformly compressed video data, instead of selectively preserving the most surgically relevant regions. This dissertation investigates the impact of training deep neural networks (DNNs), both convolutional and transformer-based architectures, on saliency-guided, differentially compressed surgical video sequences. The study systematically evaluates how such compression influences prediction accuracy, computational efficiency and storage requirements. Experimental results demonstrate that models trained on ROI-focused compressed data combined with motion vectors …

Correlation Of Internal Pressure To The Fundamental Aging Mechanism Of Li-Ion Batteries, Kayla Garcia

Electrical Engineering Theses - Archive

As technology continues to evolve, the demand for more reliable and longer-lasting batteries is growing rapidly in the electronics industry. Batteries are vital for powering a wide range of technologies, from smartphones and consumer electronics to automotive systems and high-end tools used across multiple sectors. Lithium-ion batteries (LIBs) have helped bridge the power and energy gap that these different technologies require while achieving sufficient efficiency and reliability to make carrying them around feasible and long lasting. To further enhance the performance and longevity of a these devices, a deeper understanding of the degradation mechanisms occurring inside LIBs is crucial. The …

Tracking Control Of A String Actuated Soft Trunk Robot Using State-Space Modeling, Jacob Trivisonno

Open Access Master's Theses

Soft robots, primarily composed of compliant materials, exhibit highly complex and nonlinear dynamics, making precise control a significant challenge. Traditional control methods often struggle with these complexities, requiring more advanced and data-driven methods. In our previous work, “Automatic Control of a Soft Trunk Robot Actuated by Strings” [1], a proportional controller was developed to drive the steady-state tracking error to zero. While this method was effective, it required time-consuming manual tuning and was not easily adaptable to physical modifications of the robot.

To address these limitations, this research implements gain-scheduled feedback control with state-space models calculated through a multiple linear …

Safety Monitoring & Intelligent Power Distribution Systems For Compact Agricultural Equipment, Mason O. Bradley

Theses and Dissertations--Biosystems and Agricultural Engineering

The agricultural industry continues to be one of the most dangerous career fields in the United States of America with compact agricultural equipment being a common source for casualties in the industry. The primary focus of this work is to develop new technology that improves operational safety of compact agricultural equipment through the use of low-cost embedded electronics. This work presents the design of three systems in alignment with this goal.

The first system aims to integrate electrical intelligence and passive safety monitoring into the power distribution system of a small piece of agricultural equipment. The system known as the …

High-Performance Computational Kernels For Algorithm-System Co-Design In Machine Learning: Enabling Efficient Gcn Training And Llm Inference Serving., Shakya D. Jayakody Arachchige

Graduate Thesis and Dissertation post-2024

The rapid advancement of machine learning, from Graph Convolutional Networks (GCNs) to transformer-based Large Language Models (LLMs), continues to expose fundamental limitations in memory efficiency, scalability, and system reliability. GCNs are critical for domains such as biomedical modeling, social networks, and recommendation systems, yet their reliance on sparse general matrix–matrix multiplication (SpGEMM) makes them highly sensitive to GPU memory constraints and irregular access patterns. As graph data scales, out-of-core computation becomes inevitable, but existing systems are hindered by I/O bottlenecks and underutilized GPU resources. Our contribution with AIRES demonstrates how algorithm–system co-design can alleviate these challenges: by introducing block-wise data …

Mapping Biomedical Ontology Terms To Ids: Effect Of Domain Prevalence On Prediction Accuracy, Thanh Son Do, Daniel B. Hier, Tayo Obafemi-Ajayi

Electrical and Computer Engineering Faculty Research & Creative Works

This study evaluates the ability of large language models (LLMs) to map biomedical ontology terms to their corresponding ontology IDs across the Human Phenotype Ontology (HPO), Gene Ontology (GO), and UniProtKB terminologies. Using counts of ontology IDs in the PubMed Central (PMC) dataset as a surrogate for their prevalence in the biomedical literature, we examined the relationship between ontology ID prevalence and mapping accuracy. Results indicate that ontology ID prevalence strongly predicts accurate mapping of HPO terms to HPO IDs, GO terms to GO IDs, and protein names to UniProtKB accession numbers. Higher prevalence of ontology IDs in the biomedical …

Online Learning-Driven Human Intent Estimation And Control For Human-Robot Interaction, Irfan Ganie, S. Jagannathan

Electrical and Computer Engineering Faculty Research & Creative Works

This paper presents a novel Stackelberg-game theoretic multilayer-online learning framework for cooperative control of nonlinear Physical Human-Robot Interaction (pHRI), where the human is modeled as the leader guiding a robot follower. This hierarchical interaction is captured as a dynamic Stackelberg game, with the human's intention estimated in real-time through online multilayer neural networks (MNNs). We introduce SVD-based weight update laws for actor-critic MNNs, which approximate value functions and control inputs for both human and robot, eliminating the need for predefined basis functions. In this framework, the human objective is first inferred and used to guide the robot actions by shaping …

An Entropy-Bounded, General, Model-Based Framework For Lossy Compression Of Sensor Data, Steven Thompson, Maciej Zawodniok

Electrical and Computer Engineering Faculty Research & Creative Works

In many industries, digital twinning has become an indispensable element of advanced technologies. However, digital twins are heavily reliant on extensive Internet of Things (IoT) sensor measurement data to function effectively. Consequently, data mining has become a lucrative endeavor, akin to gold rushes in the XIX century. However, the substantial volume of collected data often stresses the storage capacities for smaller to medium-sized enterprises, necessitating efficient compression techniques. Error-bound lossy compression offers substantial data reduction advantages, but introduces distortion that, when uncontrolled, can adversely affect analysis. This paper proposes an information optimization scheme that employs information entropy as a comprehensive …

Multi-Model Safe Neuro-Optimal Output Tracking Control Of Autonomous Surface Vessels With Explainable Ai, Behzad Farzanegan, S. Jagannathan

Electrical and Computer Engineering Faculty Research & Creative Works

This paper presents a safety-aware deep reinforcement learning (DRL)-based trajectory tracking control of autonomous surface vessels (ASVs). A multilayer neural network (MNN) observer estimates the ASV's state and uncertain dynamics. By utilizing the estimate state vector from the observer, a safety-aware DRL-based optimal policy is formulated using control barrier function (CBF) and Karush-Kuhn-Tucker (KKT) conditions. An actor-critic MNN with singular value decomposition (SVD)-based update mitigates vanishing gradients. To enhance adaptability, an online safe lifelong learning (SLL) scheme counters catastrophic forgetting across varying ASV dynamics. The Shapley Additive Explanations (SHAP) method identifies key features influencing the control policy. Simulations on an …

Online Adaptive Optimal Tracking Control Of Uncertain Strict Feedback Discrete-Time Systems With Hardware Verification Using A Quadrotor Uav, Maxwell Geiger, S. Jagannathan

Electrical and Computer Engineering Faculty Research & Creative Works

This article considers the infinite time horizon optimal tracking control problem for discrete time (DT) partially uncertain strict feedback systems with application to quadrotor UAVs. First, the strict feedback DT system is transformed into an equivalent affine nonlinear DT system in terms of tracking error dynamics. The optimal tracking control problem is solved using an augmented system approach, where a horizon of future reference trajectory points are used in the augmented state, as compared to using a single point. The internal dynamics of the original nonlinear strict feedback system and the transformed affine system in terms of error dynamics are …

Enhancing Measurement Accuracy In Industrial Applications: The Impact Of Sensor Data Imputation On Model Parameter Estimation, Steven Thompson, Michkath Omanda Bouraima, Maciej Jan Zawodniok

Electrical and Computer Engineering Faculty Research & Creative Works

Digital twins are meant to revolutionize the manufacturing industry by enabling advanced condition monitoring and predictive maintenance processes. However, disruptions within the manufacturing process, such as sensor malfunctions or connectivity issues are inevitable and will cripple these advanced analysis methods if not properly addressed. Therefore, efficient data management and analysis practices are key to advancing this technology. This work examines the impact of missing data imputation on model parameter estimation, a crucial task in developing models for digital twins. We theoretically derive the Cramer-Rao Lower Bound (CRLB) for a DC signal with an unknown scalar parameter in the presence of …

Active Microwave-Thermographic Signal Reconstruction, Logan M. Wilcox, Emma T. Bohannon, Kristen M. Donnell

Electrical and Computer Engineering Faculty Research & Creative Works

Active microwave thermography (AMT) is a coupled electromagnetic (EM) and thermographic nondestructive testing and evaluation (NDT&E) technique. AMT utilizes a radiating EM source (e.g., an antenna) that induces dielectric/magnetic heating on a specimen under test (SUT) which is subsequently spatiotemporally imaged with an infrared (IR) camera. As all antennas have spatial variation in their radiated power density, a nonuniform thermal excitation results within (or on the surface of) the SUT. This nonuniform heating causes uncertainty in defect detection and has the potential to lead to false positives and/or negatives. To this end, thermographic signal reconstruction (TSR), a well-established thermographic signal …

Reinforcement Learning-Based Nonlinear Optimal Discrete-Time Control Of Power Systems, Vijay Kumar Singh, Behzad Farzanegan, S. Jagannathan

Electrical and Computer Engineering Faculty Research & Creative Works

This paper presents a partially model-free adaptive optimal tracking control method for power systems, specifically targeting a synchronous generator connected through a reactive transmission line. By integrating the tracking error dynamics with reference trajectory dynamics, an augmented system is created. A discounted performance function is introduced to address the nonlinear tracking problem optimally. Unlike traditional methods that compute feedforward and feedback terms separately, the proposed approach calculates both simultaneously by minimizing the discounted performance function. The discrete-time tracking Bellman and Hamilton-Jacobi-Bellman (HJB) equations are derived, and a reinforcement learning (RL)-based technique is employed to solve the optimal policy online without …

Enhancing Fiber Optic Interferometric Sensing With Microwave Photonics-Based Dispersion Fourier Transform And Integrated Magnitude–Phase Analysis, Chen Zhu, Ruimin Jie, Chenxi Huang, Jie Huang

Electrical and Computer Engineering Faculty Research & Creative Works

Fiber optic inline interferometers are widely used for high-precision sensing due to their sensitivity, compactness, and immunity to electromagnetic interference. Traditional optical spectral analysis methods suffer from limited dynamic range due to free spectral range (FSR) constraints, while microwave photonic filtering (MPF) techniques based on dispersion Fourier transform (DFT) provide an alternative by mapping optical signals into the radio frequency (RF) domain. However, conventional passband frequency tracking in MPF systems has limited sensitivity, and the recently demonstrated phase-based methods, though highly sensitive, are constrained by phase wrapping beyond 2π. In this work, we propose and experimentally demonstrate an integrated magnitude–phase …

A Cost-Effective Nilm Solution With Three-Point Labelling And Non-Causal Convolution Technique, Yanan Zhang, Gan Zhou, Yanjun Feng, Zhan Liu, Li Huang, Zhi Li, Rui Bo

Electrical and Computer Engineering Faculty Research & Creative Works

Although deep learning is increasingly promising in the field of Non-Intrusive Load Monitoring (NILM) these days, the high costs of data recording and labelling represent a significant challenge for the training of supervised models. To address this, a cost-effective sequence-to-points NILM solution is proposed, integrating three-point labelling with non-causal convolution techniques. The approach introduces a semi-automatic labelling framework for obtaining NILM three-point data, which provides a low-cost data collection and labelling solution for large-scale applications. Then, a novel loss function combining coordinate loss and confidence loss is developed to address the positional misalignment and negative sample confusion in sequence-to-points scenario …

Distributed Sapphire Fiber Bragg Grating-Based Thermal Profiling Of Submerged Entry Nozzles, Farhan Mumtaz, Hanok W. Tekle, Bohong Zhang, Xiaodong Li, Sunday Abraham, Bryant Mathis, Jeffrey D. Smith, Ronald J. O'Malley, Jie Huang

Electrical and Computer Engineering Faculty Research & Creative Works

This article focuses on the application of sapphire fiber Bragg gratings (FBGs) for instrumentation in submerged entry nozzles (SENs) within the steelmaking industry. The SEN is pivotal for transferring molten steel from a tundish to a mold, while preventing the infiltration of oxygen and nitrogen from the surrounding environment. Maintaining optimal flow conditions in the mold is crucial for ensuring casting process stability and maintaining high-quality steel. Sapphire FBG sensors have been instrumented in SENs to enable distributed thermal mapping for monitoring the health of the SEN. The optical sensor comprises three cascaded sapphire FBGs inscribed using femtosecond (FS) laser …

Filter Based Motor Control For Robotic Applications, Shuzan Kumar Sarkar, Noah Wilding, Shruti Pandey, Nicholas Hawkins, Michael L. Mcintyre

Electrical and Computer Engineering Faculty Research & Creative Works

Controlling coreless DC motor in the field of humanoid robotic application involves considering various surrounding electromagnetic environment interference and sudden change of load with parameters variation of motor dynamics which makes the system complex. This paper presents a filter-based control scheme for a coreless DC motor drive system using an H-bridge inverter as the input circuit of the motor which is easy to implement and cost effective. From the electromagnetic characteristics, the dynamic model of the motor along with the control scheme is implemented in the commercial software PLECS. Then the effectiveness of this approach is validated through simulations demonstrating …

Ibis Model Simulation Accuracy Improvement With Slew Rate Correction, Yifan Ding, Chulsoon Hwang

Electrical and Computer Engineering Faculty Research & Creative Works

The accuracy of Power-Supply-Induced Jitter (PSIJ) simulation in Input/Output Buffer Information Specification (IBIS) models is critical for ensuring robust high-speed signal integrity analysis, but it lacks accuracy in predicting the PSIJ when the pre-driver exists in the model. Previous studies have proposed methods to improve IBIS PSIJ simulation accuracy with pre-driver effect included in the IBIS switching coefficients modification process. However, these methods fail to accurately model the output waveform slew rate change with varied power noise. In this work, an improved modification method was proposed to incorporate power-aware characteristics into the modified IBIS model, thereby improving the accuracy of …

A High Step-Up Soft-Switched Converter Based On Coupled Inductor And Current-Fed Voltage Multiplier, Koosha Choobdari Omran, Reza Beiranvand, Pourya Shamsi

Electrical and Computer Engineering Faculty Research & Creative Works

In this paper, a novel non-isolated DC-DC converter that combines coupled inductor (CI) and voltage multiplier (VM) techniques is proposed. The leakage energy of the CI is effectively recycled, and soft-switching conditions are achieved for all switches and diodes. Resonance between the leakage inductor of the CI and VM capacitors provides soft-switching conditions, without requiring a separate resonant tank. The use of VM stages not only lowers the voltage stress on semiconductor components but also allows for the use of low-voltage-rated devices, leading to reduced conduction losses, lower cost, and improved efficiency. High voltage gain can be achieved by appropriately …

Balanced Benchmarking Of Zero-Shot And Rag Approaches For Biomedical Term Normalization, Thanh Son Do, Daniel B. Hier, Tayo Obafemi-Ajayi

Electrical and Computer Engineering Faculty Research & Creative Works

Normalization of medical concepts to an ontology is a key aspect of the natural language processing of biomedical text. It enables the mapping of medical expressions to standardized ontology terms and their identifiers, thereby enhancing the interoperability and computability of medical concepts. Although large language models (LLMs) can identify and standardize medical terms, they may struggle to accurately map ontology terms to their corresponding ontology identifiers. These challenges arise from the stochastic nature of LLMs, their limited exposure to uncommon ontology identifiers during training, and their lack of an integrated lookup mechanism. We generated test sets of synthetic terms to …

Design And Optimization Of A Miniaturized Spiral Antenna For Ultra-Wideband Applications, Mckennan Starkey, Cody Goins, Victor Khilkevich, Daryl Beetner

Electrical and Computer Engineering Faculty Research & Creative Works

Ultra-wideband communication in the frequency range from 3.1 to 10.6 GHz is popular for short range wireless networks. Designing a wideband antenna that covers the entire 7.5 GHz band is challenging, particularly if the antenna should be small, unobtrusive, and should effectively communicate with another antenna as their positions and orientations change. A miniaturized wideband circularly polarized Archimedean spiral antenna is developed in this study which is wideband and circularly polarized. Miniaturization and optimization techniques are introduced to enable an antenna size of $30 \text{mm} \times 30 \text{mm}$ and a thickness less than 0.5 mm.

A Non-Destructive And Simple Setup Method For Dielectric Liquid Characterization In A Wide Frequency Range With Djordjevic-Sarkar Model, Reza Vahdani, Reza Asadi, Seyedmehdi Mousavi, Xiaoning Ye, Donghyun Kim

Electrical and Computer Engineering Faculty Research & Creative Works

This paper introduces a non-destructive and simple setup method for characterizing dielectric liquids over a broad frequency range (up to 30 GHz) using the Djordjevic-Sarkar model. By employing a differential microstrip line and comparing scattering parameters in air-filled and liquid-immersed scenarios, the proposed method achieves precise dielectric constant (DK) and dissipation factor (Df) extraction. 2 Liquid samples (PAO4 and DC-15) were tested using this method. Validation against the cavity resonance method demonstrates a strong agreement for the extracted DK values, with a relative error of less than 1.5 %, indicating high accuracy. However, the method is less sensitive to Df, …

Impact Of Voltage Regulator Modules On Power Distribution Network Impedance, Hanyu Zhang, Zhiping Yang, Alvis Hsu, Ryan Hou, Chulsoon Hwang

Electrical and Computer Engineering Faculty Research & Creative Works

The voltage regulator module (VRM) impacts the power distribution network (PDN) impedance in the low frequency range. The effect of VRM is essential for reliable PDN analysis and simulation. However, the existing VRM models for power integrity (PI) simulation lack an in-depth understanding of the effect of the feedback control in the VRM. In this paper, the impact of the VRM control loop on the PDN impedance is investigated. The relationship between the VRM output impedance and the PDN impedance at the IC input pin is derived. The output impedance of a VRM is analyzed using small signal analysis. Eventually, …

Extended S-Parameter Model Of The Power Distribution Network For Rapid Coupling Predictions, Cody Goins, Aaron Harmon, Mckennan Starkey, Kristen Donnell, Victor Khilkevich, Daryl Beetner

Electrical and Computer Engineering Faculty Research & Creative Works

Power and return planes are part of the power delivery network of almost all modern high frequency printed circuit boards. These power and return planes can form the basis of unintended radiated emissions from, or radiated coupling to, these boards. Predicting coupling to complex systems is a difficult problem and typically reserved for full wave simulations. Recent works have introduced segmentation approaches that are able to predict coupling to complex printed circuit board designs by using pre-rendered segments and cascading these segments through a circuit solver approach. The extended S-parameter models used by the segmentation approach currently do not include …