Electrical and Computer Engineering Commons^™

Analog Low Dropout Regulator Design Within A 12nm Finfet Node, Harshdeep Singh

Graduate Theses and Dissertations

Modern ICs require the use of multiple voltage regulators to regulate power, this creates the need for analog low dropout regulator (LDO) designs in more advanced nodes such as for the 12nm FinFET process. Analog design is particularly challenging in FinFET processes due to a variety of factors, such as quantized parameters, large parasitic values and length of diffusion effects. An analog LDO was chosen for its improved power supply rejection ratio (PSRR) over digital and hybrid approach which is a key metric for voltage sensitive applications. The LDO was designed through an iterative approach to address the difficulty of …

Conversion Of Thermal Energy Stored In Conductive Concrete To Electricity With Thermoelectric Generators, Moustafa M. Al Adawi

Department of Electrical and Computer Engineering: Dissertations, Theses, and Student Research

This paper presents a proof-of-concept experimental study on the use of conductive concrete as thermal energy storage and its conversion into electricity. The conductive concrete is heated to 100°C by supplying electricity, and the stored thermal energy is converted back into electricity using thermoelectric generators (TEGs). Measurement results demonstrate that the conductive concrete effectively stores thermal energy up to 100°C, and this energy can be successfully converted into electricity. The findings highlight the potential of conductive concrete as a reliable medium for thermal energy storage.

Advisor: Lim Nguyen

Predictive Modeling Of Electro-Optic Modulators Under Electromagnetic Interference, Hasan Ahmed

Optical Science and Engineering ETDs

In this age of electronic warfare, directed energy research is of utmost importance to ensure national security, robust military defense systems and gain a competitive edge in research worldwide. This thesis explores the intentional directed energy impacts on electro-optic devices by developing analytical predictive models through experimental data validation. An electro-optic modulator known as Mach-Zehnder modulator (MZM) is used to understand the implications of intentional EMI. A low frequency RF signal is injected in the MZM to create an EMI environment. The MZM behavior changes due to EMI during a pseudo-random bit sequence signal modulation were studied through analyzing receiver …

Inference Per Joule: A Performance Metric For Artificial Intelligence In Space Applications, Eduardo Macias Zugasti

Open Access Theses & Dissertations

The use of artificial intelligence (AI) has grown exponentially in recent years. This growth is driven in part by the significant advancements in computing capabilities, which have also increased exponentially. Computers have not only become more powerful but also smaller in size, thanks to the evolution of transistor technology. These developments have enabled AI to become a widely accessible tool, even in recreational activities such as image creation and entertainment videos.

More recently, the use of AI has extended to space applications, where it can enhance and optimize various tasks. However, space conditions pose significant challenges for conventional computers due …

Fibrin-Polycaprolactone Scaffolds For The Differentiation Of Human Neural Progenitor Cells Into Dopaminergic Neurons, Salma Paulina Ramirez

Open Access Theses & Dissertations

This project aimed to develop a tissue-on-a-chip platform for studying Parkinson's Disease (PD) using dopaminergic (DA) neurons. PD is a neurodegenerative disorder characterized by progressive loss of DA neurons, leading to involuntary movements and other symptoms. Early diagnosis and deeper understanding of PD pathogenesis are crucial for improving disease management and patient outcomes. To model PD in vitro, this research utilized human-induced pluripotent stem cell (hiPSC)-derived neural progenitor cells (NPCs) cultured on electrospun (ES) polycaprolactone (PCL) scaffolds. Given PCL's hydrophobicity, ECM-based biomaterial coatings, including Cell Basement Membrane (CBM) proteins, Matrigel, and Fibrin, were explored to enhance NPC adhesion, differentiation, and …

C-Band Air To Ground Communication System For Uav, Mubark Alghamdi

Theses and Dissertations

C band spectrum 5030-5091 MHz is allocated for command-and-control communication services with unmanned aircraft systems. This document evaluates the possibility of using 3GPP 5G standards for provisioning of such services. Channelization of the spectrum and major system parameters are proposed. The performance of the proposed system in channel fading environment is evaluated using MATLAB based simulations. The evaluations examine SINR, and average throughput of the proposed system at different altitudes of the unmanned aircraft system. MATLAB simulations are used to evaluate system performance in free-space environments. Signal-to-Interference-plus-Noise Ratio (SINR) and Reference Signal Received Power (RSRP) are predicted at different UAS …

Adversarial Voltage Transients In Multi-Tenant Fpga Environments, Andrew J. Gerber

All Graduate Theses and Dissertations, Fall 2023 to Present

A Field Programmable Gate Array (FPGA) is a special type of computer chip that can be reconfigured to implement a nearly unlimited number of functions. Recent trends have led some companies to offer cloud-based FPGA solutions. Researchers are exploring how to properly secure multi-tenant environments where the designs from two or more customers are placed on the same FPGA with logical and spatial isolation, though multi-tenancy is not yet commercially available in cloud FPGAs. The digital circuits within an FPGA require a clock to synchronize timing within the design. The maximum speed that this clock can run at is determined …

Scheduling Charging For Fleets Of Battery Electric Vehicles: Techniques For Modeling And Real-Time Operation, Justin J. Whitaker

All Graduate Theses and Dissertations, Fall 2023 to Present

While electric vehicles (EVs) are becoming increasingly popular and can provide cost, maintenance, and environmental benefits, they present unique challenges for regular operation, especially in fleets of vehicles. The limited range, long charging times, and high power requirements of EVs complicate the operations of fleets comprised of EVs. Additionally, the charging costs of EVs can be complex, depending on the time of charging, the energy charged, and the power level of the charging session. These complex charging costs can be significantly affected by the presence of uncontrolled loads. These challenges are further complicated by the inevitable variations in the real …

Lidar Scene Reconstruction Using Imagery And Frame Overlap From A Texel Camera, Blake Chamberlain

All Graduate Theses and Dissertations, Fall 2023 to Present

A small unmanned aerial vehicle (sUAV) can be used to reconstruct a large area of terrain by capturing 3D scans, consisting of LiDAR point clouds and an overlaid image, and combining the scans together. Forming a complete 3D scene using texel image data (fused LiDAR and digital image scans) from an entire flight can be computationally prohibitive on low-cost hardware, so combining registering scans is done using a streaming method which processes the scans in consecutive chunks. Depending on the flight pattern, matching points in the scene may be visible from scans which were not captured around the same time, …

Low Cost Additive Manufacturing Of Segmented Stator Composite Polymer Permanent Magnet Dc Motors, Ben Goldberg, Jordan Bailey, Connor Hawkins, Colin Haskins, Razvan Voicu

Symposium of Student Scholars

This study presents a novel approach to the design, manufacture, and optimization of segmented stators for composite construction axial flux permanent magnet DC motors. Traditional axial flux stator manufacturing is both challenging and expensive, creating a bottleneck in rapid prototyping and innovation. To overcome these limitations, the stator is divided into individually fabricated segments using advanced composite polymer materials and low-cost additive manufacturing techniques. This segmentation not only drastically reduces production complexity and cost but also allows for customized coil geometries that maximize the surface area for improved heat dissipation.

A key innovation of our design is the integration of …

Using Rf Hardware Technologies To Counteract Interference Within Dsrc Caused By Adjacent Unlicensed Bands, Grayson Hatcher, Billy Kihei, Nathan Kirkwood, Marco Tello

Symposium of Student Scholars

In recent years, competition within Radio Frequency (RF) communication bands has led to an overlap between the U-NII-4 band used by low-cost consumer devices, and the Dedicated Short Communication Band (DSRC) used by the Georgia Department of Transportation. Past research con- firmed that this interference leads to drastic reduction in Packet Reception Rate (PRR) for Roadside Units (RSUs) and On- Board Units (OBUs) throughout the country, resulting in a reduction of stability between different components of the Intelligent Transportation System (ITS). Our research team set a goal to prove that a low-cost and simple modification can be made to RSUs …

Sustainable Smart Farming Device With Leafit Adaptive Growth Technology, Saville Atkins, Anthony Iwejuo, Julian Pitts, Luis Mercado, Rachnicha Rojjhanarittikorn, Sandip Das, Hai Ho

Symposium of Student Scholars

For farmers, gardeners, and horticulture enthusiasts worldwide, one immutable reality is that maintaining a consistent physical presence to care for plants is not always feasible. In addition, different plants have unique needs for watering, nutrients, and environmental conditions to thrive. Failing to meet these specific needs can result in poor plant health, reduced yields, and inefficient resource usage. In this research project, we have designed and developed ‘LeaFit’ – a cutting-edge Internet of Things (IoT) device that offers a sophisticated and sustainable smart farming and gardening solution. Equipped with intelligent soil moisture, ambient temperature, humidity, and light sensors, LeaFit autonomously …

Investigation Of The Electrical Capacitance Tomography System For Determining The Spatial Distribution Of Moisture In Grain Storage, Shamte J. Kawambwa

Tanzania Journal of Engineering and Technology (TJET)

Excessive moisture content (MC) in stored grains promotes the growth of fungi and molds, which affects the quality of the grains. Effective grain monitoring methods are essential for detecting and managing grain spoilage. Electromagnetic imaging (EMI) techniques provide a promising alternative to traditional techniques by visualizing the spatial distribution of moisture within grains rather than merely average MC values offered by traditional techniques. However, existing EMI approaches often use hard-field waves, which are expensive and fragile. This study introduces an Electrical Capacitance Tomography (ECT) system that employs soft-field waves to monitor the moisture content of the grains. The system was …

Improving Image Quality In Electrical Capacitance Tomography Using Otsu Thresholding, Josiah Nombo

Tanzania Journal of Engineering and Technology (TJET)

Electrical Capacitance Tomography (ECT) is an imaging technique used in industrial process monitoring, particularly for monitoring and measuring the composition of multiphase flows. Despite its widespread application, the commonly used Linear Back Projection (LBP) algorithm often produces low-quality images due to its limited ability to handle high permittivity contrasts and nonlinearities. This study investigates the use of Otsu thresholding as a post-processing technique to enhance ECT image quality. By maximizing inter-class variance in the image histogram, Otsu thresholding improves contrast, clarity, and structural definition, enabling more effective segmentation of oil and gas components in multiphase flows. The proposed Otsu-based reconstruction …

Influence Of Substrate Temperature On The Properties Of Reactive Dc Magnetron Co-Sputtered Ag-Doped Tio2 Thin Films, Hezekiah B. Sawa

Tanzania Journal of Engineering and Technology (TJET)

This study reports on the influence of substrate temperature on the properties of Ag-doped TiO2 thin films. The films were deposited by reactive DC co-sputtering of Ti and Ag targets at different substrate temperatures and Ag target sputtering powers. Grazing incident X-ray diffractometer confirmed that all films were polycrystalline with dominant peak oriented along (101) planes representing the anatase TiO2 phase. The average grain size of the samples improved with increase in deposition temperature. At a substrate temperature of 450 ℃, the samples had a dominant peak representing the rutile phase, suggesting partial transformation from anatase to rutile phase. The …

Development Of A Microcontroller-Based Intelligent Traffic Light Control System For Vehicular Movement In T-Junctions, Frederick O. Ehiagwina

Tanzania Journal of Engineering and Technology (TJET)

This research is devoted to the issue of regulating traffic congestion in major cities using light-dependent resistors coupled with the PIC16F877A microcontroller. This study proposes an intelligent traffic control system for T-Junctions, utilizing sensing and control to optimize traffic flow through dynamic phase adjustments and congestion reduction, enabled by a microcontroller-based decision-making system. The proposed system reduces traffic congestion, automates control, and enhances safety, minimizing accidents and lowering infrastructure costs. Under simulated environment, it demonstrates an average response time of 50 ms and achieves 99% accuracy in displaying the correct countdown. Finally, the number of state transitions handled per minute …

Design And Performance Analysis Of Fiber Bragg Grating Temperature Sensor For Industrial Processes Sensing Applications, Paul Stone Stone Brown Macheso S.B.

Tanzania Journal of Engineering and Technology (TJET)

The Fiber Bragg Grating (FBG) sensor has become a widespread sensing device because of its small size, passive design, immunity to electromagnetic interference, and direct ability to measure physical properties like temperature and strain. Recently, femtosecond infrared laser processing and regeneration techniques have resulted in the development of stable high-temperature gratings, which are a powerful tool in smart factories, an aspect of the fourth Industrial Revolution (4IR), and show promise for application in harsh environments like high pressure, high temperature, or ionizing radiation. The development of stable high-temperature gratings that can withstand harsh environmental factors like high temperatures, pressures, and …

Clustering Mini-Grids To Enhance Power Systems Reliability In Distributed Generation, Santos Kihwele

Tanzania Journal of Engineering and Technology (TJET)

This study investigates the effectiveness of clustering mini-grids as a method to improve the reliability and operational stability of distributed generation systems in remote areas, particularly where renewable energy sources are predominant. As renewable resources like solar and wind are increasingly integrated into mini-grids, these systems face various challenges, particularly in maintaining stable voltage and frequency across interconnected networks. Such issues are compounded by the intermittent nature of renewable energy sources and the lack of extensive communication infrastructure in rural or resource-constrained settings. To address these control challenges, this study applies droop control techniques to two mini-grids in Uganda, utilizing …

Synthetic Inertia Provision For Load Frequency Control In Networks With High Penetration Of Renewable Energy Sources, Paulina Mkoi

Tanzania Journal of Engineering and Technology (TJET)

The integration of renewable energy sources (RESs) such as solar photovoltaic (PV) and wind energy has become a promising solution as the world shifts toward clean energy. Solar PV and wind resources are increasingly replacing conventional synchronous generators, leading to reduced system inertia and increased vulnerability to frequency instability during disturbances. To address this challenge, this study proposes a novel synthetic inertia provision strategy using a battery energy storage system (BESS) integrated alongside solar PV. The proposed method dynamically compensates for the loss of inertia by considering the variability of solar PV output due to changes in irradiance and temperature. …

Studying The Technology For Obtaining Zinc Chloride From Spent Supporter Waste In Ammonia Production, A.T. Dadaxo‘Jaev, Sodikjon Kadirov

Chemical Technology, Control and Management

This article presents the results of research on the recycling of spent zinc adsorbents formed during the ammonia production process, aimed at obtaining zinc chloride (ZnCl₂), which can be utilized in various industrial sectors, including electroplating. The research covers the optimization of technological parameters such as hydrochloric acid concentration, temperature, and reaction time to efficiently extract zinc chloride. The experiments revealed that the best results are achieved by using a 20% hydrochloric acid solution, at a temperature of 60°C, with a reaction time of 60 minutes. The resulting 40% zinc chloride solution was tested in electroplating production, where it met …

Artificial Intelligence Applications For Grid-Connected Solar Inverters, Utkirjon Ubaydullaev, Sarvinoz Mirzaeva, Hasan Mustafoev

Chemical Technology, Control and Management

The increasing global demand for renewable energy has highlighted the importance of grid-connected solar inverters in ensuring efficient and stable power conversion. However, challenges such as fluctuations in solar energy generation, grid disturbances, and power quality issues necessitate advanced control strategies. The integration of artificial intelligence (AI) into solar inverters presents a transformative solution, enhancing performance, adaptability, and reliability in real-world applications.

This review explores the role of AI techniques, including machine learning (ML), deep learning (DL), fuzzy logic, and reinforcement learning (RL), in optimizing key inverter functionalities such as maximum power point tracking (MPPT), fault detection, power quality enhancement, …

Static Characteristics Of An Electromagnetic Three-Phase Reactive Power Sensor For Converting Asymmetric Currents, Timur Urunbayevich Kurbaniyazov

Chemical Technology, Control and Management

This article discusses the processes in the elements and structures of three-phase electromagnetic current sensors used in measuring and controlling three-phase asymmetric reactive power in power supply systems, research models of quantities and parameters, physical mechanisms, and mathematical formulas based on graphical models.

Algorithms For Feature Extraction And Optimisation Of Object Recognition Operator, Hudayberdiev Xakkulmirzayevich Mirzaakbar, Bobomurod Mamitjonovich Tojiboev, Feruza Komiljonovna Samadova

Chemical Technology, Control and Management

This paper deals with the development and analysis of feature extraction and optimisation algorithms for object recognition operators. Different algorithms are used to improve the efficiency of recognition operators in the automatic analysis of remote sensing images. The information model of objects and methods for selecting, extracting and optimising their features have been studied. The issue of extracting important features of objects using spectral, textural and statistical features and constructing optimal operators based on them has also been studied. Effective approaches based on the theory of convex hulls and multidimensional analysis methods have been proposed, taking into account the mutual …

Application Of Quantum Algorithms In Optimization Of Cognitive Decision-Making Systems, Noilakhon Yakubova

Chemical Technology, Control and Management

The article analyzes the potential of quantum algorithms for optimizing cognitive decision-making systems in production processes in the energy sector. Compared with traditional algorithms, quantum algorithms allow high-speed processing of large amounts of variable data in real time and solving multiparameter problems based on an integrated approach. The study considers uncertainties and issues of increasing efficiency in the processes of production and distribution of electricity using a cognitive model. The integration of quantum algorithms into this model allows developing optimal strategies for using resources in production. A heating boiler was taken as a control object, and taking into account its …

Detection Of Http Flood Attacks Based On Machine Learning Algorithms, Norbek Karimov, Furkat Rakhmatov, Oybek Xolmuminov

Chemical Technology, Control and Management

This paper analyzes the effectiveness of Random Forest and SVM models for detecting HTTP Flood attacks. Experimental results demonstrate that both models achieve high accuracy. Evaluation was conducted using Precision, Recall, and F1 Score metrics. Additionally, key features of network traffic were extracted through correlation analysis to enable real-time application of the models in attack detection. The findings provide important insights into detecting DDoS attacks using machine learning and improving model performance.

Research Of The Dynamic Characteristics Of A Time-Pulse Ultrasonic Sensor, Aliev Ravshan, A.U. Djalilov

Chemical Technology, Control and Management

This article investigates the dynamic characteristics of a time-pulsed ultrasonic sensor used to measure water flow in open channels. The operating principle of the sensor, its response time in various hydrodynamic conditions, speed, and factors affecting measurement accuracy are analyzed. In the process of research, the improved ultrasonic sensor was tested and its effectiveness in measuring water flow in real time was evaluated. The results obtained showed that the sensor adapts to the velocity, temperature and turbulence level of the water flow. Based on the results of the research, the possibilities of working of time-impulse ultrasound sensors in open channels …

Algorithms For Fast Fire Risk Prediction And Real-Time Data Processing, Mirzoyan Mirzaaxmedovich Kamilov, Tolaniddin Ramziddinovich Nurmukhamedov, Oybek Zokirovich Koraboshev, Bakhodir Saydullayevich Achilov

Chemical Technology, Control and Management

Ensuring fire safety in facilities with high fire risk is one of the pressing problems of modern society. Nowadays, there is a great need for accurate and effective prediction systems for fire prevention and rapid response. Since traditional methods do not provide the ability to quickly analyze and predict in real time, the development of algorithms and modern approaches using modern technologies is of great importance. This article analyzes fire risk prediction algorithms, their principles of operation and effectiveness, and considers methods for assessing and predicting fire risk using Artificial Intelligence (AI), Machine Learning (ML), and Big Data technologies. The …

Security In Biometric Access Control Systems Based On Fingerprints, Elmurad Jamuradovich Qilichev, Baxodir Saydullaevich Achilov, Ismoil Ergash OʻGʻLi Isroilov, Mirshod Mirkomil O'G'Li Ahmadov

Chemical Technology, Control and Management

This article analyzes biometric access control systems using fingerprints. The article considers the advantages of using biometric technologies, including solutions aimed at ensuring security, protecting users' personal data, and increasing the efficiency of systems. A detailed explanation of the principles of operation of fingerprint biometric systems, their underlying algorithms, and technological advances is provided. Problems that arise when assessing the level of security, ease of use, and technological and social aspects of biometric access systems and methods for combating them are also covered. At the end of the article, opinions are expressed about the future of fingerprint-based biometric systems and …

Determination Of Optimal Parameters For Quality Drying Of Garlic Using The Vibro-Convective Method, Jasur Safarov, Shakhnoza Sultanova, Abdurakhmon Mirkomilov

Chemical Technology, Control and Management

This article examines the process of drying garlic using a low-temperature vibratory-convective drying system. At the "Service Technology" department of Tashkent State Technical University, a vibratory dryer was developed to ensure high-quality drying of garlic while maximizing the preservation of its biologically active compounds. Through experimental studies, optimal drying parameters were determined, including the degree of moisture removal, process duration, airflow velocity, and vibration acceleration. The results obtained contribute to enhancing the efficiency and quality of garlic drying, which holds practical significance for agricultural producers and consumers interested in healthy nutrition.

Power-Beaming: Wireless Energy Transfer Using Lasers, Spencer L. Barnett

ATU Scholars Symposium

The objective of the project is to implement a wireless energy transfer system utilizing laser technology. This system involves modulating the laser’s beam profile and spatial distribution through precise optical manipulation. The energy transmitted by the laser is captured by a photovoltaic array, commonly referred to as a solar panel, which is engineered to convert incident photons into direct current (DC) electrical power. The current challenge is to develop a reliable wireless energy transfer mechanism capable of operating over extended distances, thereby overcoming the constraints imposed by wired connections, particularly in environments where wiring is impractical, such as in space. …