Computer Engineering Commons^™

Research On Multi-Objective Optimization Method Based On Model, Jianjun Liu, Guangya Si, Yanzheng Wang, Dachuan He

Journal of System Simulation

Abstract: There is a model-based algorithm for the optimization of multiple objective functions by means of black-box evaluation is proposed. The algorithm iteratively generates candidate solutions from a mixture distribution over the solution space and updates the mixture distribution based on the sampled solutions’ domination count, such that the future search is biased towards the set of Pareto optimal solutions. The proposed algorithm seeks to find a mixture distribution on the solution space so that each component of the mixture distribution is a degenerate distribution centered at a Pareto optimal solution and each estimated Pareto optimal solution is uniformly spread …

Research And Application Of A Lightweight Real-Time Human Posture Detection Model, Hongkun Zhu, Jiawei Yin, Wenyu Feng, Hua Liang, Minrui Fei, Kun Zhang

Journal of System Simulation

Abstract: The traditional OpenPose model has good accuracy but slow speed in human posture detection. In order to accelerate the detection speed and reduce the model on condition of the detection precision, based on the traditional OpenPose model, the residual network with second-order term fusion is used to extract the low-level features, the weights of the trained model are pruned by the L1 norm weight, and an improved OpenPose model is proposed. Experiments show that when the detection accuracy is approximately equal to original model, the model size reduces to about 8%, the parameters reduces by nearly 83%, and the …

Under Impact Of Non-Motor Vehicle Violation An Analysis On Vehicle Operation Efficiency, Sun Di, Zhou Jin, Sijia Liu, Xiaoming Zhang, Xueying Gao

Journal of System Simulation

Abstract: In order to study the impact of non-motor vehicle violations on motor vehicle traffic efficiency at signalized intersections, the non-motor vehicle traffic behaviors are analyzed. An actual intersection is selected as study object, the main violation behaviors of on selected intersection are analyzed by using the linear regression model. For traffic light violation behavior of non-motor vehicles, the violation rate is modeled by using logistic model, and the results are analyzed. At the signal controlled intersection, non-motor vehicle violations affect the normal motor vehicles, and time is delayed. The delay time of motor vehicle under non-motor vehicle …

Construction And Test Method Of A Semi-Physical Simulation System For Laser Driving Guidance Weapon, Zhang Xiang, Mengyan Liu, Zhang Peng, Kewei Zhu, Xiaodong Yan

Journal of System Simulation

Abstract: To achieve the previous semi-physical simulation of the laser beam-guided weapon, the two-dimensional translation system must be used. But the technical index of the two-dimensional translation system is not high enough to meet the requirements of the relative motion simulation speed and acceleration of the projectile. To solve the problem, a new method and test method for the semi-physical simulation system of laser driving guidance weapon is proposed. The “two-axis turret + load bracket” simulation system construction method is adopted to replace the linear motion of the two-dimensional translation system by the rotational angular motion of the …

Container-Based Automatic Packaging Technology For Complex System Simulation Application, Wang Shuai, Zhu Feng, Yiping Yao, Wenjie Tang, Yuhao Xiao

Journal of System Simulation

Abstract: Container-based technology provides a new solution for the rapid and flexible deployment of complex system simulation applications. Container supports service-based packaging of simulation applications, which greatly reduces the difficulty of deploying simulation applications. Current packaging technology mainly relies on manually writing Dockerfile, which results in low packaging efficiency and human errors. A container-based automatic packaging technology for complex system simulation application is proposed, and the reusable library component template is defined. Combined image template is generated by combining simulation application and library component templates. Dockerfile is generated by the combined template after syntax optimization and error detection. The experiments …

Two Gd Atoms Adsorbed On Zigzag Graphene Nanoribbon:A First-Principles Study, Weifeng Xie, Zuo Xu

Journal of System Simulation

Abstract: A giant Rashba-type spin splitting is highly critical for the application of spintronics, but one-dimensional magnetic systems are rarely involved. In order to explore the characteristics and strength of Rashba effect in one-dimensional magnetic systems, two Gd atoms adsorbed on Zigzag graphene nanoribbon system is proposed. The characteristics and strength of the Rashba effect in different magnetization directions and the magnetic anisotropy of the system are analyzed through the first-principles calculations. The results show that the antiferromagnetic ground state system has strong Rashba strength and out-of-plane magnetic anisotropy. In addition, the Rashba effect in magnetic system needs to …

Optimal Scheduling And Decision Making Method For Dynamic Flexible Job Shop, Wang Yan, Ding Yu

Journal of System Simulation

Abstract: For multi-objective dynamic flexible job-shop scheduling, an improved multi-objective differential evolution algorithm is proposed. The adaptive cross-mutation operator is introduced into the differential evolution algorithm to improve its global search capability. The fast non-dominated sorting method based on immunological principles is introduced to improve the quality of the solution set in the selection and sorting. An improved TOPSIS-G1-EVM comprehensive decision-making method is proposed. The comprehensive weight of G1-EVM is calculated by Nash equilibrium theory. The comprehensive weight and TOPSIS evaluation system are combined to evaluate each dispatching scheme. The experimental results show that the optimal scheduling algorithm is superior …

Fast 3d Medical Image Registration Based On Geometric Feature Invariants, Juping Gu, Tianyu Cheng, Jianping Wang, Hua Liang, Fengshen Zhao, Jiang Ling

Journal of System Simulation

Abstract: Aiming at the of large amount of computational data and low registration efficiency in 3D cranial medical image registration, a fast registration method based on geometric feature space constraints is proposed. The algorithm extracts three-dimensional contour point clusters, and proposes a feature construction method based on the optimal fitting ring of point clusters. The feature rings and the centroids of each layer are used as feature quantities, and the fast registration is completed by using Iterative Closest Point (ICP) method. The experimental results show that the method has less computation amount, high satisfactory registration accuracy and much faster registration …

Research On Improvement Of Parameters Calibration Method Of Microscopic Traffic Simulation Model, Chenjing Zhou, Yacong Gao, Rong Jian

Journal of System Simulation

Abstract: Model parameter calibration is the precondition of application of micro traffic simulation technology. In view of the lack of refined analysis in the model parameter calibration classification and calibration result determination, the corresponding improvement is proposed. The parameter calibration system divides global parameters and local parameters, provides a micro-simulation model parameter calibration method that combines engineering measurement and intelligent optimization. Based on the information entropy as the analysis index of the parameter calibration results, a method of parameter recursion after clustering is proposed. On the basis of the actual survey data of signalized intersections, A simulation experiments and …

Design And Simulation On A Novel Sliding Mode Control For Linear Induction Motor, Kaiwei Han, Wang Yan, Zhicheng Ji

Journal of System Simulation

Abstract: The speed-tracking problem of linear induction motors under the influence of unmatched disturbances is studied. Based on the extended disturbance observers, the novel sliding mode controllers are designed to make the motor have effective response characteristics under unmatched disturbances. The extended disturbance observersis designed for the unmatched disturbances in the linear induction motor model with edge effects. The observations of the disturbance derivatives are filtered. The novel sliding mode controllers are designed based on the observations of the disturbances and their derivatives. The simulations results show that the designed controller has effective response characteristics and robustness. In addition, it …

A Fast Latin Hyper Cube Experiment Design Method Based On Soduku Grouping, Tiantian Zhang, Li Ni, Guanghong Gong, Yuanjie Lu

Journal of System Simulation

Abstract: In order to solve the long optimization time and parameter level combination explosion in the complex experiment design space of Latin Hypercube design, which is one of the most popular method in experiment design, a fast Soduku grouping-based method is proposed. The optimal seed design is expanded and transformed in the grouped spaces. Experiments are conducted to compare the Soduku grouping-based Latin Hypercube design method with other two commonly used Latin Hypercube design methods in the middle and high dimension experiment space. The results show that Soduku grouping method is more efficient in computation and has better space-filling performance.

Simulation Of Incentive Mechanism Simulation On Reverse Supply Chain Of Waste Products Based On Dual Drive, Dongshi Sun, Danlan Xie, Guan Feng, Ji Yuan

Journal of System Simulation

Abstract: In view of the current situation of coordination failure caused by different benefits of different entities in the waste reverse supply chain, based on system dynamics, a three-party evolutionary game model of residents, waste disposal institutions and production enterprises is constructed. Vensim simulation software is used to establish the stock-flow chart with the strategy selection probability as the horizontal variable. In the two cases of exogenous variable in constant and a time-trend, the simulation is carried out separately, and the strategy evolution path of the three parties is obtained without external interference. Through sensitivity analysis, the exogenous variables …

Effect Of New Titanium Alloy On Biomechanical Behavior Of Dental Implant, Jiwu Zhang, Qiguo Rong

Journal of System Simulation

Abstract: Titanium alloy materials have excellent mechanical properties, chemical stability and biocompatibility, and have become the main raw materials for implants. However, the biomechanical compatibility of medical titanium alloys still needs to be improved in order to meet the long-term safety and functionality of patient's clinical treatment requirement. New medical titanium alloy materials with high strength and low modulus play an important role in reducing the loosening and shedding of implants caused by stress shielding. The effects of new medical titanium alloy materials and traditional medical titanium alloy materials on implant structure and stress distribution of jaw are compared and …

Research On Real-Time Simulation Method Of Bi-Sar Echo In Time-Varying Sea Scene, Guijie Diao, Ni Hong, Zhe Liu, Li Yang

Journal of System Simulation

Abstract: Based on bistatic scattering mechanism and the geometric relationship of bistatic synthetic aperture radar (Bi-SAR), a real-time simulation method of Bi-SAR radio frequency echo in time-varying sea scene is proposed. For the couple scattering in time-varying sea scene, a Bi-SAR echo signal model is established on the basis of multipath scattering model. The Bi-SAR system response function for time-varying sea target is calculated in real-time, using high performance computing technology, high-capacity real-time access technology and full-switching system designing. The simulation results show the effectiveness of the method.

A Pmbldc Motor Measurement And Control System Available For Zynq Hardware-In-The-Loop Simulation, Zhiguo Zhou, Jiaen Sun, Jiabao Yu, Xuehua Zhou

Journal of System Simulation

Abstract: In order to solve the modeling of permanent magnet brushless dc(PMBLDC) motor, it is difficult to modify the control algorithm, inconvenient to add and remove the closed loop, and has poor real-time measurement and control capability. Based on hall sensor position detection algorithm and PID control algorithm, combined with piecewise linear method to generate PWM waveform, Simulink graphical modeling platform is used, and a new closed-loop measurement and control method is proposed. A sudden load and sudden speed simulation are carried out to verify the established PMBLDC motor measurement and control system. The simulation results show that the system …

Monitoring Of Remote Hydrocarbon Wells Using Azure Internet Of Things, Derek W. Staal

LSU Master's Theses

Remote monitoring of hydrocarbon wells is a tedious and meticulously thought out task performed to create a cyber-physical bridge between the asset and the owner. There are many systems and techniques on the market that offer this solution but due to their lack of interoperability and/or decentralized architecture they begin to fall apart when remote assets become farther away from the client. This results in extreme latency and thus poor decision making. Microsoft's Azure IoT Edge was the focus of this writing. Coupled with off-the-shelf hardware, Azure's IoT Edge services were integrated with an existing unit simulating a remote hydrocarbon …

Strain And Stress Relationships For Optical Phonon Modes In Monoclinic Crystals With Β-Ga2O3 As An Example, Rafal Korlacki, Megan Stokey, A. Mock, Sean Knight, A. Papamichail, V. Darakchieva, Mathias Schubert

Department of Electrical and Computer Engineering: Faculty Publications

Strain-stress relationships for physical properties are of interest for heteroepitaxial material systems, where strain and stress are inherent due to thermal expansion and lattice mismatch. We report linear perturbation theory strain and stress relationships for optical phonon modes in monoclinic crystals for strain and stress situations which maintain the monoclinic symmetry of the crystal. By using symmetry group analysis and phonon frequencies obtained under various deformation scenarios from density-functional perturbation theory calculations on β-Ga₂O₃, we obtain four strain and four stress potential parameters for each phonon mode. We demonstrate that these parameters are sufficient to …

Blockchain Based Communication Architectures With Applications To Private Security Networks, Ashley N. Mayle

Computer Science ETDs

Existing communication protocols in security networks are highly centralized. While this naively makes the controls easier to physically secure, external actors require fewer resources to disrupt the system because there are fewer points in the system can be interrupted without the entire system failing. We present a solution to this problem using a proof-of-work-based blockchain implementation built on MultiChain. We construct a test-bed network containing visual imagers and microwave sensor information. These data types are ubiquitous in perimeter security systems and allow a realistic representation of a real-world network architecture. The cameras in this system use an object detection algorithm …

Strain And Stress Relationships For Optical Phonon Modes In Monoclinic Crystals With Β-Ga2O3 As An Example, Rafal Korlacki, Megan Stokey, A. Mock, Sean Knight, Alexis Papamichail, Vanya Darakchieva, Mathias Schubert

Department of Electrical and Computer Engineering: Faculty Publications

Strain-stress relationships for physical properties are of interest for heteroepitaxial material systems, where strain and stress are inherent due to thermal expansion and lattice mismatch. We report linear perturbation theory strain and stress relationships for optical phonon modes in monoclinic crystals for strain and stress situations which maintain the monoclinic symmetry of the crystal. By using symmetry group analysis and phonon frequencies obtained under various deformation scenarios from density-functional perturbation theory calculations on β-Ga₂O₃, we obtain four strain and four stress potential parameters for each phonon mode. We demonstrate that these parameters are sufficient to …

Incentivization In Mobile Edge Computing Using A Full Bayesian Approach, Sean Lebien

Electrical and Computer Engineering ETDs

The advances of multi-access edge computing (MEC) have paved the way for the integration of the MEC servers, as intelligent entities into the Internet of Things (IoT) environment as well as into the 5G radio access networks. In this thesis, a novel artificial intelligence-based MEC servers’ activation mechanism is proposed, by adopting the principles of Reinforcement Learning (RL) and Bayesian Reasoning. The considered problem enables the MEC servers’ activation decision-making, aiming at enhancing the reputation of the overall MEC system, as well as considering the total computing costs to serve efficiently the users’ computing demands, guaranteeing at the same time …

Formal Concept Analysis Applications In Bioinformatics, Sarah Roscoe

School of Computing: Dissertations, Theses, and Student Research

Bioinformatics is an important field that seeks to solve biological problems with the help of computation. One specific field in bioinformatics is that of genomics, the study of genes and their functions. Genomics can provide valuable analysis as to the interaction between how genes interact with their environment. One such way to measure the interaction is through gene expression data, which determines whether (and how much) a certain gene activates in a situation. Analyzing this data can be critical for predicting diseases or other biological reactions. One method used for analysis is Formal Concept Analysis (FCA), a computing technique based …

A Bibliometric Survey Of Smart Wearable In The Health Insurance Industry, Apeksha Shah, Swati Ahirrao, Shraddha Phansalkar, Ketan Kotecha

Library Philosophy and Practice (e-journal)

Smart wearables help real-time and remote monitoring of health data for effective diagnostic and preventive health care services. Wearable devices have the ability to track and monitor healthcare vitals such as heart rate, physical activities, BMI (Body Mass Index), blood pressure, and keeps an individual notified about the health status. Artificial Intelligence-enabled wearables show an ability to transform the health insurance sector. This would not only enable self-management of individual health but also help them focus from treatments to the preventions of health hazards. With this customer-centric approach to health care, it will enable the insurance companies to track the …

Design And Implementation Of Intuitive Human-Robot Teleoperation Interfaces, Lei Wu

USF Tampa Graduate Theses and Dissertations

We have designed and implemented a novel human-robot teleoperation interface based on an intuitive reference frame and hybrid inverse kinematics to perform activities of daily living(ADL) using multiple input devices.

Persons with disabilities often rely on caregivers or family members to assist in their daily living activities. Providing robotic assistants with easy and intuitive user interfaces to assist with ADL can improve their quality of life and lift some of the burdens on caregivers and family members. Current human-robot interface solutions, such as joysticks, Kinect based gesture recognition, and touchscreen-based solutions, including smartphones, are still far from being able to …

An Approach To Counting Vehicles From Pre-Recorded Video Using Computer Algorithms, Mishuk Majumder

LSU Master's Theses

One of the fundamental sources of data for traffic analysis is vehicle counts, which can be conducted either by the traditional manual method or by automated means. Different agencies have guidelines for manual counting, but they are typically prepared for particular conditions. In the case of automated counting, different methods have been applied, but You Only Look Once (YOLO), a recently developed object detection model, presents new potential in automated vehicle counting. The first objective of this study was to formulate general guidelines for manual counting based on experience gained in the field. Another goal of this study was to …

A Bibliometric Survey Of Fashion Analysis Using Artificial Intelligence, Seema Wazarkar, Shruti Patil, Satish Kumar

Library Philosophy and Practice (e-journal)

In the 21^st century, clothing fashion has become an inevitable part of every individual human as it is considered a way to express their personality to the outside world. Currently the traditional fashion business models are experiencing a paradigm shift from being an experience-based business strategy implementation to a data driven intelligent business improvisation. Artificial Intelligence is acting as a catalyst to achieve the infusion of data intelligence into the fashion industry which aims at fostering all the business brackets such as supply chain management, trend analysis, fashion recommendation, sales forecasting, digitized shopping experience etc. The field of “Fashion …

Proposal For The Development And Addition Of A Cybersecurity Assessment Section Into Technology Involving Global Public Health, Stanley Mierzwa, Bok Gyo Jeong, Claire Yun

Center for Cybersecurity

This paper discusses and proposes the inclusion of a cyber or security risk assessment section during the course of public health initiatives involving the use of information and communication computer technology. Over the last decade, many public health research efforts have included information technologies such as Mobile Health (mHealth), Electronic Health (eHealth), Telehealth, and Digital Health to assist with unmet global development health needs. This paper provides a background on the lack of documentation on cybersecurity risks or vulnerability assessments in global public health areas. This study suggests existing frameworks and policies be adopted for public health. We also propose …

Effect Of Pvdf-Ca Ratio On Electrospun Membrane For Water–Oil Filtration Application, Mohamad Haziq Alias, Izan Izwan Misnon, Rajan Jose

Makara Journal of Technology

Oil spillage and generation of industrial water–oil wastewater mixture ignite a focus on filtration technology. Electrospinning technique provides a versatile route in producing tunable diameter and pores in nanofiber filtration membrane development. In this work, polyvinylidene difluoride (PVDF) and cellulose acetate (CA) electrospun membrane at different concentration ratios were synthesized for water–oil filtration application. The polymeric solutions were characterized using viscometer and conductivity testing, whereas the membranes were analyzed using contact angle, tensile test, scanning electron microscopy (SEM), and filtration testing of oil (dichloromethane). Conductivity test showed a decreased conductivity along with decrement of CA ratio in the polymeric solution. …

Effect Of Landfill Leachates On Some Water Quality Indicators Of Selected Surface Water And Groundwater At Ilokun, Ado-Ekiti, Nigeria, Olorunwa Omofunmi, Adesola Satimehin, Abraham Oloye, Okwunna Umego

Makara Journal of Technology

This study was conducted to examine the impact of dumpsites on the quality of groundwater and surface water. The water samples and leachates were collected from dumpsites in respective zones. The physicochemical properties of the samples were examined and determined in accordance with the standards of the American Public Health Association. Results indicated that the groundwater and surface water that are close to the dumpsites have an electrical conductivity of 385 and 245 Sd/cm, total dissolved solids of 168 and 128 mg/L, a turbidity of 4.6 and 22 NTU, a total alkalinity of 103 and 50 mg/L, a total hardness …

Effect Of Catholyte Concentration On Current Production During Chocolate Industry Wastewater Treatment By A Microbial Fuel Cell, Diana Rahayuning Wulan, Suprihanto Notodarmojo

Makara Journal of Technology

Microbial fuel cells (MFCs) use bacteria as a catalyst to oxidize organic and/or inorganic substrates and produce electric currents. Wastewater could function as an electron donor in the anode chamber and, thus, represents a very promising energy source. Catholytes, as electron acceptors, influence power production in MFCs by increasing the availability of electrons. The present research aims to determine the influence of catholyte concentration on current production in an aerobic two-chamber MFC. Aerobic treatment was carried out in the two-chamber MFC operated in an incubator at 37  1 °C with and without aeration in the cathode chamber. Wastewater from …

Evaluation Of Il-17a And Il-17f Gene Expression In Peripheral Blood Mononuclear Cells In Different Clinical Stages Of Chronic Hepatitis B Infection In An Iranian Population, Tannaz Akbari Kolagar, Seyed Reza Mohebbi, Fatemeh Ashrafi, Shahrzad Shoraka, Hamid Asadzadeh Aghdaei, Mohammad Reza Zali

Makara Journal of Technology

Hepatitis B virus (HBV) infection is one of the main causes of liver damage, which can also lead to chronic hepatitis B (CHB) infection. More than 240 million individuals worldwide are chronic carriers of HBV. Among individuals with CHB who are untreated, approximately 15% – 40% will progress to liver cirrhosis or cancer. The interactions between HBV and host immune response play significant roles in the progression of CHB. CHB can be generally divided into four different clinical phases: immune tolerance (IT), immune clearance, inactive carrier, and Hepatitis B surface antigen (HBsAg)-negative reactivation phase (ENEG). Many studies showed that interleukins …