Computer Engineering Commons^™

Artificial Neural Network-Based Prediction Assessment Of Wire Electric Discharge Machining Parameters For Smart Manufacturing, Itagi Vijayakumar Manoj, Sannayellappa Narendranath, Peter Madindwa Mashinini, Hargovind Soni, Shanay Rab, Shadab Ahmad, Ahatsham Hayat

Department of Electrical and Computer Engineering: Faculty Publications

Artificial intelligence (AI), robotics, cybersecurity, the Industrial Internet of Things, and blockchain are some of the technologies and solutions that are combined to produce “smart manufacturing,” which is used to optimize manufacturing processes by creating and/or accepting data. In manufacturing, spark erosion technique such as wire electric discharge machining (WEDM) is a process that machines different hard-to-cut alloys. It is regarded as the solution for cutting intricate parts and materials that are resistant to conventional machining techniques or are required by design. In the present study, holes of different radii, i.e. 1, 3, and 5mm, have been cut on Nickelvac-HX. …

Accurate Indoor Navigation System Based On Imu/Lp-Mm Integrated Method Using Kalman Filter Algorithm, Abdullah Mohammed Bahasan

Hadhramout University Journal of Natural & Applied Sciences

Abstract

The demand for navigation systems is rapidly increasing, especially in indoor environments which the signal of GPS is not available. Therefore the Inertial Measurement Unit (IMU) system is a suitable navigation system in such indoor environments. It usually consists of three accelerometers and three gyroscopes to determine position, velocity and attitude information, respectively, without need of any external source. But this type of navigation systems has errors growth with time due to accelerometers and gyroscopes drifts. This paper introduces indoor navigation system based on integrated IMU navigation system with proposed system called Landmarks Points-Map Matching (LP-MM) system using Kalman …

Realization Of Multi-Valued Logic Using Optical Quantum Computing, Sophie Choe

Dissertations and Theses

Quantum computing is a paradigm of computing using physical systems, which operate according to quantum mechanical principles. Since 2017, functioning quantum processing units with limited capabilities are available on the cloud. There are two models of quantum computing in the literature: discrete variable and continuous variable models. The discrete variable model is an extension of the binary logic of digital computing with quantum bits |0⟩ and |1⟩ . In the continuous variable model, the quantum state space is infinite-dimensional and the quantum state is expressed with an infinite number of basis elements.

In the physical implementation of quantum computing, however, …

Deep Reinforcement Learning For Articulatory Synthesis In A Vowel-To-Vowel Imitation Task, Denis Shitov, Elena Pirogova, Tadeusz A. Wysocki, Margaret Lech

Department of Electrical and Computer Engineering: Faculty Publications

Articulatory synthesis is one of the approaches used for modeling human speech production. In this study, we propose a model-based algorithm for learning the policy to control the vocal tract of the articulatory synthesizer in a vowel-to-vowel imitation task. Our method does not require external training data, since the policy is learned through interactions with the vocal tract model. To improve the sample efficiency of the learning, we trained the model of speech production dynamics simultaneously with the policy. The policy was trained in a supervised way using predictions of the model of speech production dynamics. To stabilize the training, …

Self-Learning Algorithms For Intrusion Detection And Prevention Systems (Idps), Juan E. Nunez, Roger W. Tchegui Donfack, Rohit Rohit, Hayley Horn

SMU Data Science Review

Today, there is an increased risk to data privacy and information security due to cyberattacks that compromise data reliability and accessibility. New machine learning models are needed to detect and prevent these cyberattacks. One application of these models is cybersecurity threat detection and prevention systems that can create a baseline of a network's traffic patterns to detect anomalies without needing pre-labeled data; thus, enabling the identification of abnormal network events as threats. This research explored algorithms that can help automate anomaly detection on an enterprise network using Canadian Institute for Cybersecurity data. This study demonstrates that Neural Networks with Bayesian …

Obstacle Avoidance And Simulation Of Carrier-Based Aircraft On The Deck Of Aircraft Carrier, Junxiao Xue, Xiangyan Kong, Bowei Dong, Hao Tao, Haiyang Guan, Lei Shi, Mingliang Xu

Journal of System Simulation

Abstract: A predictive depth deterministic policy gradient (PDDPG) algorithm is proposed by combining the least squares method with deep deterministic policy gradient(DDPG) for the problems of strong randomness, poor real-time performance, and slow planning speed by obstacle avoidance on aircraft carrier deck. The short-term trajectory of dynamic obstacles on the deck is predicted by the least square method. DDPG is used to provide agents with the ability to learn and make decisions in continuous space by the short-term trajectory of dynamic obstacles. The reward function is set based on the artificial potential field to improve the convergence speed and accuracy …

Costume Pattern Sketch Colorization And Style Transfer Based On Neural Network, Xingquan Cai, Zhijun Li, Mengyao Xi, Haiyan Sun

Journal of System Simulation

Abstract: Aiming at the problems of color overflow in pattern sketch colorization and lack of fabric texture features in style transfer, this paper proposes a method of costume pattern sketch colorization and style transfer based on neural network. This paper initializes the data set, collects the costume pattern image, extracts the costume pattern sketch, synthesizes the costume pattern sketch with color features and constructs the style data set. The research builds the conditional generative adversarial nets and achieves the costume pattern sketch with color features colorization based on the generator. The study constructs a convolutional neural network model, uses the …

Flexible Job-Shop Scheduling Problem Based On Improved Wolf Pack Algorithm, Chaoyang Zhang, Liping Xu, Jian Li, Yihao Zhao, Kui He

Journal of System Simulation

Abstract: An improved wolf pack algorithm is proposed for solving multi-objective scheduling optimization for flexible job shop problems. A multi-objective flexible job shop scheduling model is developed with the maximum completion time of the workpiece and the energy consumption of the machine as the optimization goals. An improved wolf pack algorithm is proposed for solving the shortcomings that traditional wolf pack algorithm is easy to fall into the local optimization. Through improving the intelligent behavior of the wolf pack algorithm, individual codes are designed from the two levels of job's process and machine, and POX(precedence operation crossover) cross operation is …

Calculation Of Optimal Vocs Emission Reduction Based On Improved Seirs Model In Cloud Environment, Guangqiu Huang, Xixuan Zhao, Qiuqin Lu

Journal of System Simulation

Abstract: Volatile organic compounds (VOCs) emissions in different regions are correlated and influenced. In order to minimize the impact of VOCs on the atmospheric environment and achieve synergistic governance of VOCs regions, an optimal emission reduction model is established with the maximum VOCs emission reduction as the primary goal. An improved SEIRS infectious disease dynamics optimization algorithm considering environmental pollution(SEIRS-CE) is proposed and the model is solved in cloud environment. Taking Xi'an city as an example, the SEIRS-CE algorithm is used in Ali cloud server to calculate the emission reduction of VOCs associated with 13 meteorological monitoring stations in Xi …

Learning-Based High-Performance Algorithm For Long-Term Motion Prediction Of Fluid Flows, Jingyuan Zhu, Huimin Ma, Jian Yuan

Journal of System Simulation

Abstract: Simulating the dynamics of fluid flows accurately and efficiently remains a challenging task nowadays, and traditional fluid simulation methods consume large computational resources to obtain accurate results. Deep learning methods have developed rapidly, which makes data-based fluid simulation and generation possible. In this paper, a motion prediction algorithm for long-term fluid simulation is proposed, which is based on a density field with a single frame and a previous velocity field of a sequence. The model focuses on matching the velocity and density fields predicted by the neural network with the simulated data based on the Navier-Stokes equation …

Hyper-Heuristic Three Dimensional Eda For Solving Green Two-Sided Assembly Line Balancing Problem, Rong Hu, Shuai Ding, Bin Qian, Changsheng Zhang

Journal of System Simulation

Abstract: This paper establishes a model for green robotic two-sided assembly line balancing problem of type-I, and a hyper-heuristic three dimensional estimation of distribution algorithm (HH3DEDA) is proposed for solving this problem. In HH3DEDA, a combinatorial encoding rule based on process selectors is designed via considering the characteristics of the problem. Then, HH3DEDA with a high and low layered structure is proposed. In the upper layer, the three-dimensional probability matrix is utilized to learn high-quality high individual block structure and its distribution information, and then the matrix is sampled to generate new high level individuals. Each high individual is …

Research On Modeling And Solution Method Of Operational Tasks Optimization, Yue Ma, Lin Wu, Yun Liu, Guangzhao Ding

Journal of System Simulation

Abstract: Aiming at the problem of tasks optimization in operation task planning, this paper defines an operational tasks graph based on property graph and influence network to describe tasks, effects and their relationship. The model of operational tasks optimization is constructed based on the operational tasks graph, and the effect network transmission algorithm and resource constraint judgment algorithm are proposed. The problem is solved by the improved differential evolution algorithm. The experimental result shows that the operational tasks graph can vividly describe the relationship between operational tasks and effects, and the model and solution method are feasible and effective.

Simulation On Cooperative Control Of Connected And Automated Vehicles At Interchange Based On Petri Net, Mingbao Pang, Zhen Liu

Journal of System Simulation

Abstract: To improve the traffic efficiency of interchange, a simulation model of complete process is built by timed Petri net (TdPN) considering multiple separation and merging behaviors in the process of connected and automated vehicles (CAVs) passing through the interchange. In the light of vehicle priority, a speed guidance strategy is proposed and a CAVs cooperative control model is established, so as to form a complete interchange TdPN model. This method is verified by simulation and compared with the cooperative control method of interchange exit and its connecting area, cooperative control method of multi-merging areas within the interchange. The results …

Multi-Objective Optimization Algorithm Based On Multi-Index Elite Individual Game Mechanism, Xu Wang, Weidong Ji, Guohui Zhou, Jiahui Yang

Journal of System Simulation

Abstract: In order to improve the convergence of multi-objective optimization algorithm and the diversity of optimization solution set, and alleviate the flown down of population in target space, a multi-objective optimization algorithm based on multi-attribute elite individual game mechanism is proposed. This paper uses Pareto dominance relationship and multi-index to comprehensively screen elite individuals. The elite individual game mechanism with K-means clustering is integrated with cross and mutation strategy, which effectively improves the convergence and diversity of the algorithm. A detailed convergence analysis of the algorithm is performed to prove the convergence of the algorithm. Eight representative comparison algorithms are …

Research On Decision Behavior Modeling Method Of Key Figures, Xiao Zheng, Xiaodong Peng, Minyu Lu, Tiejun Liu

Journal of System Simulation

Abstract: The decision-making of key figures is an important factor affecting the evolution of concerned events. The research on their decision-making behavior is of great significance for the prediction of important events. For the problem of decision behavior modeling and decision propensity prediction of key figures, the character attribute and measurement methods required for character modeling are analyzed, the character decision-making process and decision-making related influencing factors are analyzed, the exploration research of decision propensity prediction method is carried out, and the prediction model of decision propensity based on comprehensive interest characteristics and psychological characteristics is constructed. Through the research …

Dynamic Performance Evaluation Method For Transfer In Rail Transit Station Based On Station Simulation And Lstm, Bisheng He, Hongxiang Zhang, Yongjun Zhu, Gongyuan Lu

Journal of System Simulation

Abstract: Given the boom increasing of rail transit passenger volume, the dynamic performance evaluation method for transfer in rail transit stations based on machine learning are proposed to effectively evaluate the performance of the transfer station in different scenarios. Based on the proposed dynamic performance evaluation indexes of effective transfer number, transfer time and congestion, the influence factors of station dynamic performance are analyzed. The simulation model integrated train operation and pedestrian movement is built to provide the time-series data for the machine learning method. The long short-term memory (LSTM) is implemented to forecast the evaluation indicators, and the …

A New Electromagnetic Positioning Model With Single Coil Receiver For Virtual Interventional Surgery, Jianhui Zhao, Peijun Zhong, Zhiyong Yuan, Wenyuan Zhao, Tingbao Zhang

Journal of System Simulation

Abstract: To meet the needs of 3D positioning of guide wire catheter in interventional surgery and the requirements of smaller size sensor for narrow cerebral vessels, a new electromagnetic positioning model is proposed with single coil receiver. Based on the electromagnetic theory and geometry principle, the electromagnetic field transmitter with groups of three orthogonal coils and the single coil receiver with smaller size than existing sensors are designed. Based on Biot-Savart Law, the distance between receiving end and geometric center of orthogonal coils is calculated, and spatial coordinate of receiving end is computed based on the spherical intersection formula. To …

Multiagent Following Multileader Algorithm Based On K-Means Clustering, Guodong Yuan, Ming He, Ziyu Ma, Weishi Zhang, Xueda Liu, Wei Li

Journal of System Simulation

Abstract: Three K-means clustering algorithms are proposed to prevent chaos in the formation of a multi-agent system (MAS) with multiple leaders. The algorithm divides the cluster into communities with the same number of leaders, and the agents within the community will follow the same leader. Among the three proposed algorithms, algorithm #1 is suitable for scenarios with widely distributed agents wherein rapid consensus can be achieved in the shortest time; algorithm #2 is suitable for scenarios with a sparse agent distribution and effectively prevented agent collisions; and algorithm #3 exhibits rapid convergence and considerably reduces the MAS control cost, …

Lightweight Webvr Real-Time Simulation Of Large-Scale Fire Scenario In Metro, Yang Li, Huijuan Zhang, Chenchen Ge, Kang Xie, Zhuang Li, Jinyuan Jia

Journal of System Simulation

Abstract: Large-scale fire simulation requires a huge amount of calculation and excellent rendering capabilities, which poses a challenge to the realization of a real-time online fire simulation system on the Web. A lightweight Web-based real-time simulation technology framework for subway station fire is proposed. Based on the simplification of calculation formulas in the field of fire safety and the analysis of the impact of smoke prevention facilities in subway stations, a two-stage smoke diffusion model based on smoke bay is proposed to achieve the smoke diffusion trend calculation; a Web-side multi-granularity particle emitter framework at the smoke bay level is …

Floor Evacuation Simulation Based On Bim And Mr, Zhijie Li, Shuangyu Ma, Changhua Li, Xiao Liang, Jie Zhang

Journal of System Simulation

Abstract: Facing with the problem that the floor evacuation simulation only annotates the floor plan route, which is relatively single and not intuitive, a 3D building evacuation simulation method integrating mixed reality and building information model is proposed. The BIM components are reasonably planned and segmented, and reasonable annotation is performed. The BIM information is routed through the surface area heuristic optimization algorithm based on the bounding volume hierarchy. The evacuation simulation process is imported into the Microsoft Hololens2 hardware platform using the Unity3D development engine. The experimental results show that, compared with the previous evacuation simulation expressed only …

Multi-Strategy Hybrid Abc For Microarray High-Dimensional Feature Selection, Chuandong Qin, Baosheng Li, Baole Han

Journal of System Simulation

Abstract: Traditional feature selection approaches have major limitations for high-dimensional microarrays, and it is difficult to accurately and efficiently propose the best feature subset. To address this problem, a multi-strategy hybrid artificial bee colony (ABC) algorithm based on wrapper is proposed, which mixes chaotic opposition-based learning strategy, elite guidance strategy, and Mantegna Lévy distribution strategy, and proposes two new search strategies in the employed and onlooker bee phases respectively. A new objective function is proposed for the microarray high-dimensional feature selection problem, which balances the optimal performance of the model with the minimization of the feature subset …

Application Of Digital Twin Model In Grinding Of Bearing Rings, Hongbin Liu, Zhiqiang Shen, Yize Wang, Ming Qiu, Wenrong Lin

Journal of System Simulation

Abstract: The digital twin model can effectively promote the virtual-real interaction between the actual product and the product model. Aiming at the grinding force generated in the grinding process of spherical roller bearings, this paper constructs the bearing ring raceway grinding process by performing dynamics, contact algorithm modeling and rigid-flexible coupling treatment on the components of the grinding work area. The digital twin model completes the virtual mapping of the grinding work area of the bearing ring in the digital space. The model is used to analyze and test the process parameters such as the grinding wheel linear speed and …

Multi-Media Energy Planning Optimization Of Steel Based On Improved Moea/D, Hongcai Ouyang, Dinghui Wu, Junyan Fan, Jing Wang

Journal of System Simulation

Abstract: To address the problems of multi-media iron and steel energy planning model with more variables, complex constraints and high difficulty in model solving, an improved MOEA/D (decomposition-based multi-objective evolutionary algorithm) based on adaptive neighborhood is proposed to realize multi-media energy planning optimization. Considering the characteristics of TOU price and the buffer effect of gas holder, the objective function to minimize operation cost and total energy consumption is constructed. And the model constraints are designed such as energy supply and demand balance. The decoding method based on energy production and consumption rules is designed to determine the target value. The …

Integrated Soft Sensor Modeling Of Fermentation Process Based On Transfer Component Analysis, Yuesheng Zhou, Weili Xiong

Journal of System Simulation

Abstract: The Penicillin fermentation process is an uncertain and multi-stage process. There are different working conditions among different batch fermentation processes, and the distribution of process data is not necessarily the same, which degrades the performance of the traditional soft sensing model. Combined with the transfer learning strategy and Gaussian mixture model, a multi-model ensemble soft sensor modeling method based on transfer component analysis is proposed. In this method, the transfer component analysis is used to get the shared feature mapping matrix between samples, and adapt the edge probability distribution of labeled dataset and unlabeled dataset; the modeling data are …

Evolution And Enlightenment Of Us-Japan “Advanced Storage Research Consortium”, Sumei Wang

Bulletin of Chinese Academy of Sciences (Chinese Version)

In the process of comprehensively promoting Chinese-style modernization, we must adhere to scientific and technological selfreliance and self-improvement as the strategic support for national development, and scientific and technological innovation is the main driving force for high-quality economic development. As one of the carriers, the innovation consortium formed by enterprises as main entities aims to realize the deep integration of innovation chain and industrial chain, accelerating the transformation of scientific and technological achievements into real productivity, and solving the problem of disconnection between scientific research activities and industrial demand. On the basis of reviewing and summarizing the evolution of the …

The Rise And Risks Of Internet Of Things, Diamond E. Hicks

Cybersecurity Undergraduate Research Showcase

Internet of Things (IoT) has become a necessary part of our everyday lives. IoT is the network in which many different devices communicate, connect, and share data. Though how IoT got to where it is today, the issues it faced, and how it affects our lives today is not common knowledge. Despite the fact that IoT has advanced our technology to what it is today, people do not completely understand what it does.

Chatgpt As Metamorphosis Designer For The Future Of Artificial Intelligence (Ai): A Conceptual Investigation, Amarjit Kumar Singh (Library Assistant), Dr. Pankaj Mathur (Deputy Librarian)

Library Philosophy and Practice (e-journal)

Abstract

Purpose: The purpose of this research paper is to explore ChatGPT’s potential as an innovative designer tool for the future development of artificial intelligence. Specifically, this conceptual investigation aims to analyze ChatGPT’s capabilities as a tool for designing and developing near about human intelligent systems for futuristic used and developed in the field of Artificial Intelligence (AI). Also with the helps of this paper, researchers are analyzed the strengths and weaknesses of ChatGPT as a tool, and identify possible areas for improvement in its development and implementation. This investigation focused on the various features and functions of ChatGPT that …

Process Automation And Robotics Engineering For Industrial Processing Systems, Drake Stimpson

USF Tampa Graduate Theses and Dissertations

Automation in industrial systems applications has emerged as the fundamental solution for improving quality, production rate, and efficiency of a process. Much of the recent popularity surrounding the transition of processes from manually operated tasks to automated systems can be attributed to the concept of Industry 4.0, which outlines the fundamental guidelines for integrating cyber-physical systems into industrial processes. Due to rapid advancement of technology in robotics and automation as well as the increase in accessibility of resources to this technology, the capability to develop automated systems has become feasible for small-scale enterprise. This work presents a two-part initiative to …

Low-Power Redundant-Transition-Free Tspc Dual-Edge-Triggering Flip-Flop Using Single-Transistor-Clocked Buffer, Zisong Wang, Peiyi Zhao, Tom Springer, Congyi Zhu, Jaccob Mau, Andrew Wells, Yinshui Xia, Lingli Wang

Engineering Faculty Articles and Research

In the modern graphics processing unit (GPU)/artificial intelligence (AI) era, flip-flop (FF) has become one of the most power-hungry blocks in processors. To address this issue, a novel single-phase-clock dual-edge-triggering (DET) FF using a single-transistor-clocked (STC) buffer (STCB) is proposed. The STCB uses a single-clocked transistor in the data sampling path, which completely removes clock redundant transitions (RTs) and internal RTs that exist in other DET designs. Verified by post-layout simulations in 22 nm fully depleted silicon on insulator (FD-SOI) CMOS, when operating at 10% switching activity, the proposed STC-DET outperforms prior state-of-the-art low-power DET in power consumption by 14% …

System And Method For Object Recognition Based Estimation Of Planogram Compliance, Pranoy Hari, Shilpa Y. Rao, Rajashree Ramakrishnan, Avishek Kumar Shaw, Archan Ray, Nishant Kumar, Dipti Prasad Mukherjee

Patents

Object recognition based estimation of planogram compliance provides an expected arrangement of products in shelves. Identifying whether a product is placed in an appropriate location of a shelf is a challenging task due to various real-time parameters associated with image capturing. In the present disclosure, an input image associated with shelf of a retail store is received and a product images are cropped. Further, a set of reference images stored in a database are scaled corresponding to the input image. Further, one or more composite matching scores are calculated based on normalized cross-correlation and shape based feature matching to obtain …