Computer Engineering Commons^™

Arsenic Detection Project: Electronics, Anthony Clemetson, John Barth

Interdisciplinary Design Senior Theses

This project is a collaboration with a team of bioengineers to adapt the functionality of laboratory equipment onto a platform which could be used in the field to determine the concentration levels of toxins in ground water. To this end, using a set of printed electrodes, a device was designed and fabricated with the constraints of field use in mind: low power, low cost, with a mobile user interface. An Android phone served as the mobile user interface, and also as the power supply for the circuit and microcontroller that performed the test. This circuit applied a stimulus voltage across …

Beehive Monitor, Tyler William Lewis

Computer Engineering

No abstract provided.

Talk Vox, Javier Thiele-Ruiz

Computer Engineering

No abstract provided.

Possible Geometric Explanations For Basic Empirical Dependencies Of Systems Engineering, Francisco Zapata, Vladik Kreinovich

Departmental Technical Reports (CS)

In this paper, we provide possible geometric explanation for basic empirical dependencies of system engineering: that a properly designed system should have no more than 7 plus minus 2 elements reporting to it, and that the relative cost of correcting a defect on different stages of the system's life cycle is 3--6 on the second (design) stage, 20--100 on the third (development) stage, and 250--1000 on the fourth (production and testing) stage.

Towards Fast And Reliable Localization Of An Underwater Object: An Interval Approach, Quentin Brefort, Luc Jaulin, Martine Ceberio, Vladik Kreinovich

Departmental Technical Reports (CS)

To localize an underwater object, we measure the distance to this object from several sonar sensors with known locations. The problem is that the signal sent by some of the sonars is reflected not by the desired object(s), but by some auxiliary object and thus, the values measured by these sensors are drastically different from the distance to the desired object. To solve this problem, currently probabilistic methods are used; however, since we do not know the exact probability distributions, these methods may miss the actual location of the object. There exist interval-based methods which provide guaranteed (reliable) bounds on …

Multi-Team Strategic Game Development, Alvin Bokun Feng

Computer Engineering

No abstract provided.

How To Explain The Definition Of Stochastic Affiliation To Economics Students, Tonghui Wang, Olga Kosheleva, Vladik Kreinovich

Departmental Technical Reports (CS)

To formally describe the intuitive idea of "positive correlation" between two quantities, it is often helpful to use the notion of stochastic affiliation. While this notion is useful, its usual definition is not intuitively clear -- which make it difficult to explain this notion to, e.g., economics students. To help students understand this notion, in this paper, we show how the notion of stochastic affiliation can be explained in clear probabilistic terms.

Observable Causality Implies Lorentz Group: Alexandrov-Zeeman-Type Theorem For Space-Time Regions, Olga Kosheleva, Vladik Kreinovich

Departmental Technical Reports (CS)

The famous Alexandrov-Zeeman theorem proves that causality implies Lorentz group. The physical meaning of this result is that once we observe which event can causally affect which other events, then, using only this information, we can reconstruct the linear structure of the Minkowski space-time. The original Alexandrov-Zeeman theorem is based on the causality relation between events represented by points in space-time. Knowing such a point means that we know the exact moment of time and the exact location of the corresponding event - and that this event actually occurred at a single moment of time and at a single spatial …

Frameworks For A General-Purpose Smart Home Operating System, Donald Hoelle

Computer Science and Software Engineering

Smart home technologies are rapidly growing in prevalence. For my senior project, I designed and implemented the beginnings of a general-purpose framework for a unified Smart Home Operating System, capable of controlling all of the diverse aspects of automated homes. This paper outlines the design challenges involved in building generic smart home systems, as well as the project architecture I designed and implemented to attempt to solve this problem.

Implementing A Robust Data Storage Software System For Cp9, Stuart Andrew Weickgenant

Computer Engineering

This project focuses on the continuation of the CP9 CubeSat project, specifically the software which will be running on the satellite when it goes into space. This project mostly goes into designing a robust system which stores the data collected from the sensors on board CP9, whose purpose is to collect vibrations data from its launch vehicle during its ascent into space, into an easy to analyze system once the data is downlinked to PolySat’s ground station after launch. One other thing this system does is to prevent CP9 from collecting unnecessary data after launch. Testing was done on this …

Gesture Recognition Using Microsoft’S Kinect V2, Andrew Weinfield

Computer Engineering

No abstract provided.

“State Machines”: A High-Throughput Distributed Game Framework, Brandon Howell Ivy

Computer Engineering

Online multiplayer games allow competition with other opponents using the internet. Their development is difficult as it involves many complex areas of computer science - optimization, security, big data, and thread safety. Many multiplayer game frameworks have been published, but very few are generic.

In this project, we focus on the framework design of a web service which allows users to easily create multiplayer games, and artificial intelligence bots to compete in them. It handles turn-based multiplayer communication, and allows the games and bots to ignore the concepts of multiplayer systems. Multiple game instances can run simultaneously, where each game’s …

Geovisualization: Integration And Visualization Of Multiple Datasets Using Mapbox, Cecilia Cadenas

Computer Engineering

he use of geovisualizations to analyze multiple datasets can ease the research and investigation to find correlations between these datasets. However, making these visualizations with multiple datasets can be challenging due to the lack of standardization within file formats and the software needed to render the visualizations.

This project investigates the making of these visualizations, maps in this case, using an open source platforms like Mapbox. Using Python scripts for the data parsing, CartoCSS for the designing of the maps, JavaScript to make the maps interactive, and HTML to combine all the layers together a set of maps were created. …

Spirit: A Home Automation System, Andrew Choi

Computer Engineering

Spirit is a multi device home automation system. Designed and implemented for California Polytechnic State University’s Senior Project program, this project was worked on during the duration of two school quarters from January 7, 2014 to June 13, 2014. The system consists of monitor/controllers designed to carry out everyday tasks in the average American household and an accompanying mobile application designed to receive information and control the devices. The monitor/controllers, or “Spirits”, are primarily developed using Arduino development tools and Arduino microcontroller boards. The spirits include a thermostat, named Tempus, an electrical outlet, Electrus, and a wall light switch, Luxos.

Autotab - Automatic Guitar Tablature Generation, Shaun Boley, Anthony Cisneros, Eric Kauzlarich

Computer Engineering

Our project consists of two different parts:

The first part contains an analysis of various pitch estimation algorithms. A number of different open-source pitch estimation libraries were tested using guitar recordings in order to gauge how accurately and consistently they outputted the correct frequencies. The results showed that the algorithms did not perform up to expectations, especially when testing with guitars with wound strings and within certain frequency ranges.

The second part details the creation of a tablature generator. It reads in a note sequence as an input, then generates tablature in the form of ASCII text. A modified greedy …

Ultraviolet Led Biofouling Mitigation, Andrew Lam

Computer Engineering

The goal is to determine if low-cost UV LEDs can mitigate marine biofouling on small glass or acrylic camera lenses. A microprocessor-controlled experimental setup to control the illumination of low-cost UV LEDs of various wavelength and packaging was fashioned. The system consists of a programmed microcontroller, a manufactured LED breakout interface, and a submergible UV LED array enclosed in a borosilicate glass tube. A preliminary qualitative assessment of four different UV LEDs was conducted during a three-week deployment of the experimental setup in the raw seawater system at the Cal Poly Center for Costal and Marine Sciences in Avila Beach, …

Growing Grounds Inventory Senior Project Application, Javier Balandran

Computer Engineering

No abstract provided.

Improved Accuracy In Real-Time Rfid Localization Systems Using Kalman Filtering, Benjamin J. Sanda

Masters Theses

The use of Radio Frequency Identification (RFID) has become widespread in industry as a means to quickly and wirelessly identify and track packages and equipment. Now there is a commercial interest in using RFID to provide real-time localization. Efforts to use RFID technology for this purpose experience localization errors due to noise and multipath effects inherent to these environments. This paper presents the use of both linear Kalman filters and non-linear Unscented Kalman filters to reduce error effects inherent to real-time RFID localization systems and provide more accurate localization results in indoor environments. A commercial RFID localization system designed for …

Robotic Book Scanner, Tobias Samuel Elder, Cynthia Marie Wong

Computer Engineering

Digitizing books has been an issue tackled by companies to allow people to read off Kindles and iPads rather than the traditional paperback. Companies like Google have spent more than $1000 on machines to convert books into electronic copies readable on devices. Yet, not much effort has been made into the invention of an automatic book scanner for consumers. This project seeks to determine a cost-effective approach to robotic book scanning to create PDFs from physical books. This project serves as a proof of concept for a reasonably priced automatic book scanner accessible to consumers. Potentially, the device may be …

Chromium Os On Freescale I.Mx6q, Pushpal Sidhu

Computer Engineering

This projects intention is to get Chromium OS running on a Freescale i.MX6q processor, a processor based on the ARM® Cortex™-A9 architecture. The development board I used is the Ventana GW5400 by Gateworks. This project inherently meant using Chromium OS's development system which meant I created a board specific package for the Ventana single board computer. This project is a proof of concept that can mean extending Chromium OS to various implementations of the ARM® Cortex™-A9 architecture.

Migrating To Ipv6 - The Role Of Basic Coordination, Mehdi Nikkhah, Roch Guerin

All Computer Science and Engineering Research

The need for a larger Internet address space was acknowledged early on, and a solution (IPv6) standardized years ago. Its adoption has, however, been anything but easy and still faces significant challenges. The situation begs the questions of "why has it been so difficult?" and "what could have been (or still be) done to facilitate this migration?" There has been significant recent interest in those questions, and the paper builds on a line of work based on technology adoption models to explore them. The results confirm the impact of several known factors, but also provide new insight. In particular, they …

An Enhanced Self-Healing Protection System In Smart Grid: Using Advanced And Intelligent Devices And Applying Hierarchical Routing In Sensor Network Technique, Mohamed Eid Aljahani

Masters Theses

This paper presents a self-healing protection systems were designed using PSCAD software to test and investigate the efficiency of this method. The system was applied on a typical distribution system with loads, buses, and power sources. The availability of advanced and intelligent devices, such as IEDs and PMUs was the trigger to design proficient and accurate self-healing protection systems which are associated with future smart grids. Deploying optimal sensors distributed within the grid could be a suitable method to monitor and control the distribution network. By using a hierarchical clustering communication technique, optimal sensors can work wirelessly and efficiently without …

Battery Management System, Michael Desando, Kyle Woody

Electrical Engineering

Problem Statement:

There have been recent reports of multi-million dollar companies having to recall entire projects due to their BMS’s malfunctioning or operating incorrectly. The purpose of this project is to analyze the future of batteries, the Lithium-Ion cell, and to exercise a BMS to better understand its capabilities and possible cases for errors. Lithium ion batteries are intolerant of overcharge and overdischarge. Abuse of this kind can result in high temperatures, venting of gases, fire, or explosion. Therefore battery management systems have been devised to prevent such abuse. Recent events such as fires on the Boeing Dreamliner and the …

Automated Foosball Table, Jim R. Stefani, Alex J. Herpy, Brett Gordon Jaeger, Kevin S. Haydon, Derek Alan Hamel

Mechanical Engineering

This project is the second iteration of an automated foosball table for Yaskawa America as a trade show display. The table is meant to provide an interactive experience which highlights the speed and precision of the Yaskawa hardware. The first iteration of the project was mainly focused on creating the physical hardware for the system and to begin the basic programming for the system. This phase of the project was focused on finalizing the physical hardware of the system, implementing the vision system and to continue the basic programing of the system AI. A third team will be assigned to …

All Purpose Mobile Gps, James C. Smith, Matt Weege, Kevin Peters

Electrical Engineering

The aim of the All Purpose Mobile GPS (The System) is to create a GPS tracking device that can accurately record location and calculate velocity, distance traveled and elevation change even when the satellite signal is lost. This data can later overlay on existing internet-based maps illustrating a trip to oneself or others. The portable tracker consumes very little power achieving several days’ worth of power in a single charge. A solar cell provides a quick battery boost in a pinch. SD Card storage increases compatibility with computers and other forms of data transfer. Data processing, such as viewing the …

Ad-Hoc Hid: Modular Wireless Human Interface Device, Joseph A. Mazzanti

Electrical Engineering

Ad-Hoc HID is a modular, reprogrammable Human Interface Device. This device is intended to function as a keyboard, gamepad, or mouse, according to the user's needs. The final project is intended to be switch agnostic, making the final product adaptable to the user’s needs.

Team Omnimouse, Derek J. Halman, Josh B. Porter, Steven A. Silver, Ian S. Stemper

Computer Engineering

INFORMATION, DATA, FIGURES AND DRAWINGS EMBODIED IN THIS DOCUMENT ARE STRICTLY CONFIDENTIAL AND ARE SUPPLIED ON THE UNDERSTANDING THAT THEY WILL NOT BE DISCLOSED TO THIRD PARTIES WITHOUT THE PRIOR WRITTEN CONSENT OF QUALITY OF LIFE PLUS.

Laser Tag - An Application Of Infrared Communication, Michael J. Altschuler, Michael B. Peterson, Elmer Pres Ventura Urbano

Computer Engineering

The purpose of this project is to design, build, and test laser tag system from the ground up. Much of the laser tag equipment that is available on the market right now use infrared technology to track and register “hits” between players. Our goal is to take this system and redesign it to shoot farther, be more energy efficient, and make it cheaper to produce.

Ecs Game Engine Design, Daniel Masamune Hall

Computer Engineering

Game programming design and organization can be difficult and complicated. To simplify the development process, frameworks with an array of tools and utilities known as game engines are used. The main goal of this project is to explore game engine designs and develop a design for a modular and expandable game engine. The designs covered in this paper are Object Oriented Programing (OOP) and two Entity Component System (ECS). OOP designs, commonly used in computer science, use a hierarchy of objects to share functionality. ECS designs are based off of the concepts Composition over inheritance in which objects contain features …

Cnc Torch, Steven Chiu

Computer Engineering

This CNC Torch cuts steel plate. It can cut up to a maximum area of 3x3 feet. The user builds a cut list on the touchscreen from a selection of predefined shapes and enters the parameters need for each shape. When the user is ready, the cut list is sent to an Arduino that will move each motors accordingly to the shapes desired.