Computer Engineering Commons^™

Analysis On The Mission Reliability For Auv Based On Monte Carlo Method, Li Juan, Kunyu Zhang, Haibo Li, Lijuan Yang, Mengdi Wang

Journal of System Simulation

Abstract: The high reliability of AUV is the necessary condition for it to complete the task satisfactorily and efficiently within the specified time. Traditional fault tree is very convenient for describing the reliability model of the system, but for large and complex system, this will significantly increase the computation of reliability parameters, thus the calculation is difficult. Because it to calculate the reliability parameters of complex systems by the traditional fault tree, this paper adopts the method of combining the minimum cut set of fault tree and Monte Carlo method to establish the reliability model for Underwater Autonomous Unmanned Vehicle …

Dynamic Inventory Routing Optimization Based On Deep Reinforcement Learning, Jianpin Zhou, Shuliu Zhang

Journal of System Simulation

Abstract: Aiming at the dynamic stochastic inventory routing problem with periodic fluctuation of demand, a novel simulation optimization approach based on deep reinforcement learning is proposed to achieving periodic steady strategy. Firstly a dynamic combinatorial optimization model is constructed. Then, by deep reinforcement learning and setting heuristic rules, the replenishment nodes set selection and the replenishment batch allocation weights in each period are determined. The simulation experimental results show that the proposed method can improve the average profit of a cycle by about 2.7% and 3.9% in low fluctuating demand case and by about 8.2% and 7.1% in high fluctuating …

Corner Localization In Digital Images Based On Radon Transform, Xuguang Wang, Zhang Qin, Su Jie

Journal of System Simulation

Abstract: Location accuracy is one of the key indexes of measuring the performance of feature point.. High location accuracy feature point detection has important implications for the applications such as 3D reconstruction, motion estimation, target tracking and recognition, image registration, etc. A corner location algorithm based on Radon transform is proposed.Edge binary images are obtained with traditional method first, ideal straight lines and curves are extracted then, potential corner locations are calculated next, fake corners are rejected finally. Experimental results on both simulation and real images show that, this method performs better than the existing methods on interest point localization …

Localized Dielectric Loss Heating In Dielectrophoresis Devices, Tae Joon Kwak, Imtiaz Hossen, Rashid Bashir, Woo-Jin Chang, Chung-Hoon Lee

Electrical and Computer Engineering Faculty Research and Publications

Temperature increases during dielectrophoresis (DEP) can affect the response of biological entities, and ignoring the effect can result in misleading analysis. The heating mechanism of a DEP device is typically considered to be the result of Joule heating and is overlooked without an appropriate analysis. Our experiment and analysis indicate that the heating mechanism is due to the dielectric loss (Debye relaxation). A temperature increase between interdigitated electrodes (IDEs) has been measured with an integrated micro temperature sensor between IDEs to be as high as 70 °C at 1.5 MHz with a 30 V_pp applied voltage to our ultra-low …

Founding The Domain Of Ai Forensics, Ibrahim Baggili, Vahid Behzadan

Electrical & Computer Engineering and Computer Science Faculty Publications

With the widespread integration of AI in everyday and critical technologies, it seems inevitable to witness increasing instances of failure in AI systems. In such cases, there arises a need for technical investigations that produce legally acceptable and scientifically indisputable findings and conclusions on the causes of such failures. Inspired by the domain of cyber forensics, this paper introduces the need for the establishment of AI Forensics as a new discipline under AI safety. Furthermore, we propose a taxonomy of the subfields under this discipline, and present a discussion on the foundational challenges that lay ahead of this new research …

Using Machine Learning Classification Methods To Detect The Presence Of Heart Disease, Nestor Pereira

Dissertations

Cardiovascular disease (CVD) is the most common cause of death in Ireland, and probably, worldwide. According to the Health Service Executive (HSE) cardiovascular disease accounting for 36% of all deaths, and one important fact, 22% of premature deaths (under age 65) are from CVD.

Using data from the Heart Disease UCI Data Set (UCI Machine Learning), we use machine learning techniques to detect the presence or absence of heart disease in the patient according to 14 features provide for this dataset. The different results are compared based on accuracy performance, confusion matrix and area under the Receiver Operating Characteristics (ROC) …

Robot Motion Planning In Dynamic Environments, Hao-Tien Lewis Chiang

Computer Science ETDs

Robot motion planning in dynamic environments is critical for many robotic applications, such as self-driving cars, UAVs and service robots operating in changing environments. However, motion planning in dynamic environments is very challenging as this problem has been shown to be NP-Hard and in PSPACE, even in the simplest case. As a result, the lack of safe, efficient planning solutions for real-world robots is one of the biggest obstacles for ubiquitous adoption of robots in everyday life. Specifically, there are four main challenges facing motion planning in dynamic environments: obstacle motion uncertainty, obstacle interaction, complex robot dynamics and noise, and …

Factor Analysis Of Mixed Data (Famd) And Multiple Linear Regression In R, Nestor Pereira

Dissertations

In the previous projects, it has been worked to statistically analysis of the factors to impact the score of the subjects of Mathematics and Portuguese for several groups of the student from secondary school from Portugal.

In this project will be interested in finding a model, hypothetically multiple linear regression, to predict the final score, dependent variable G3, of the student according to some features divide into two groups. One group, analyses the features or predictors which impact in the final score more related to the performance of the students, means variables like study time or past failures. The second …

Hardware Implementation Of Assistive Technology Robot, Joycephine Li

Publications and Research

SuperHERO is an on-going research project in Computer Engineering Technology department which involves upgrading Heathkit Education Robot (HERO) hardware circuits and features by using modern hardware devices and sensors. The current phase of the project will focus on upgrading the motor drive system hardware as well as implementation and testing of features such as mobile robot obstacle detection and other assistive technologies to help people with disabilities. This involves the reattachment of the robot arm after repairing and updating with 3D printing and using modern hardware and software technology. We observed that the robotic arm has rotary and translation movements …

Amodal Instance Segmentation And Multi-Object Tracking With Deep Pixel Embedding, Yanfeng Liu

Department of Electrical and Computer Engineering: Dissertations, Theses, and Student Research

This thesis extends upon the representational output of semantic instance segmentation by explicitly including both visible and occluded parts. A fully convolutional network is trained to produce consistent pixel-level embedding across two layers such that, when clustered, the results convey the full spatial extent and depth ordering of each instance. Results demonstrate that the network can accurately estimate complete masks in the presence of occlusion and outperform leading top-down bounding-box approaches.

The model is further extended to produce consistent pixel-level embeddings across two consecutive image frames from a video to simultaneously perform amodal instance segmentation and multi-object tracking. No post-processing …

Hardware-Entangled Software Execution Using Dynamic Pufs, Wenjie Xiong

Yale Day of Data

Low-end computing devices are becoming increasingly ubiquitous, especially due to the widespread deployment of Internet-of-Things products. There is, however, much concern about sensitive data being processed on these low-end devices which have limited protection mechanisms in place. This paper proposes a Hardware-Entangled Software Protection (HESP) scheme that leverages hardware features to protect software code from malicious modification before or during run-time. It also enables implicit hardware authentication. Thus, the software will execute correctly only on an authorized device and if the timing of the software, e.g., control flow, was not changed through malicious modifications. The proposed ideas are based on …

The Fog Development Kit: A Platform For The Development And Management Of Fog Systems, Colton Powell

Computer Science and Engineering Master's Theses

With the rise of the Internet of Things (IoT), fog computing has emerged to help traditional cloud computing in meeting scalability demands. Fog computing makes it possible to fulfill real-time requirements of applications by bringing more processing, storage, and control power geographically closer to end-devices. How- ever, since fog computing is a relatively new field, there is no standard platform for research and development in a realistic environment, and this dramatically inhibits innovation and development of fog-based applications. In response to these challenges, we propose the Fog Development Kit (FDK). By providing high-level interfaces for allocating computing and networking resources, …

Aluminum/Carbon Composites Materials Fabricated By The Powder Metallurgy Process, Amélie Veillère, Hiroki Kurita, Akira Kawasaki, Yongfeng Lu, Jean-Marc Heintz, Jean-François Silvain

Department of Electrical and Computer Engineering: Faculty Publications

Aluminum matrix composites reinforced with carbon fibers or diamond particles have been fabricated by a powder metallurgy process and characterized for thermal management applications. Al/C composite is a nonreactive system (absence of chemical reaction between the metallic matrix and the ceramic reinforcement) due to the presence of an alumina layer on the surface of the aluminum powder particles. In order to achieve fully dense materials and to enhance the thermo-mechanical properties of the Al/C composite materials, a semi-liquid method has been carried out with the addition of a small amount of Al-Si alloys in the Al matrix. Thermal conductivity and …

Chapman Ambassador Tour Robot, Alexandra Lewandowski, Yanni Parissis, Khiry Carter, Hilary Lee

Student Scholar Symposium Abstracts and Posters

Being a student ambassador improves a student's confidence and leadership skills. With an increasing demand for technology skills, our project will display how the ambassador robot can assist student ambassadors while improving upon their efficiency, by discussing information during college campus tours and familiarizing students with robot applications and their technology. The ambassador robot can support students during tours by answering a question about specific knowledge that may have slipped an ambassador's mind. The robot will also be able to create a group-focused atmosphere that will allow ambassadors to have the opportunity to lean on a dependable teammate for specific …

How Degrees Of Freedom Affects Sense Of Agency, Akima Connelly, Jungsu Pak, Tian Lan, Uri Maoz

Student Scholar Symposium Abstracts and Posters

Can the rubber-hand illusion be extended to a moving robotic arm in different degrees of freedom (DOF), inducing sense of ownership & agency over the arm? We hypothesize that DOF closer to what humans possess will result in a stronger sense of ownership and agency.

The Trolley Problem In Virtual Reality, Jungsu Pak, Ariane Guirguis, Nicholas Mirchandani, Scott Cummings, Uri Maoz

Student Scholar Symposium Abstracts and Posters

Would people react to the Trolley problem differently based on the medium? Immersive Virtual Reality Driving Simulator was used to examine participants respond to the trolley problem in a realistic and controlled simulated environment.

Advanced Security Analysis For Emergent Software Platforms, Mohannad Alhanahnah

School of Computing: Dissertations, Theses, and Student Research

Emergent software ecosystems, boomed by the advent of smartphones and the Internet of Things (IoT) platforms, are perpetually sophisticated, deployed into highly dynamic environments, and facilitating interactions across heterogeneous domains. Accordingly, assessing the security thereof is a pressing need, yet requires high levels of scalability and reliability to handle the dynamism involved in such volatile ecosystems.

This dissertation seeks to enhance conventional security detection methods to cope with the emergent features of contemporary software ecosystems. In particular, it analyzes the security of Android and IoT ecosystems by developing rigorous vulnerability detection methods. A critical aspect of this work is the …

Voice Controlled Augmented Reality: A Comparison Of Speech-Recognition Tools For Ar Applications, Juan Estrella

Publications and Research

Augmented Reality (AR) refers to the technologies that enhance the version of the physical environment with computer-generated sensory input such as sound and graphics overlaid on top of the user’s view of the real world. Artificial Intelligence (AI) studies how to make computer programs and machines "smart" and take decisions. Our research project focuses on exploring the Integration of AI in AR applications. Specifically, on using Speech Recognition or Natural Language Processing for controlling virtual AR objects and enhancing the human-computer interaction. It is obvious that integration of AI and AR is of great value. However, for developers, it is …

International Space Object Orbit Tracker, Nicole Navarro

Publications and Research

This software engineering project involves development of machine learning algorithms for embedded applications. High speed 32-bit hardware devices such as Raspberry Pi and ARM microcontrollers has become inexpensive and readily available. Machine learning algorithms for applications such as image processing and image recognition are computationally intensive. But with the availability of low cost 32-bit embedded computing devices, it is now feasible to implement then on embedded hardware. This project will explore embedded applications of machine learning algorithms by following a software engineering design and test approach.

Static Taint Analysis Of Binary Executables Using Architecture-Neutral Intermediate Representation, Elaine Cole

All Computer Science and Engineering Research

Ghidra, National Security Agency’s powerful reverse engineering framework, was recently released open-source in April 2019 and is capable of lifting instructions from a wide variety of processor architectures into its own register transfer language called p-code. In this project, we present a new tool which leverages Ghidra’s specific architecture-neutral intermediate representation to construct a control flow graph modeling all program executions of a given binary and apply static taint analysis. This technique is capable of identifying the information flow of malicious input from untrusted sources that may interact with key sinks or parts of the system without needing access to …

Low-Cost Near Infrared Diffuse Optical Imaging System, Mohammed Z. Shakil, Chen Xu

Publications and Research

Diffuse Optical Tomography (DOT) and Optical Spectroscopy using near-infrared (NIR) diffused light has demonstrated great potential for the initial diagnosis of tumors and in the assessment of tumor vasculature response to neoadjuvant chemotherapy. The NIR technique utilizes intrinsic hemoglobin contrast, which is directly related to tumor angiogenesis development, a key process required for tumor growth and metastasis. The NIR diffuse tomography holds great promise in distinguishing early-stage invasive breast cancers from benign lesions. This technique also provides insight into tumor metabolism and tumor hypoxia, important indicators of tumor response to various forms of therapy. Currently, the high cost of the …

Self-Driving Toy Car Using Deep Learning, Fahim Ahmed, Suleyman Turac, Mubtasem Ali

Publications and Research

Our research focuses on building a student affordable platform for scale model self-driving cars. The goal of this project is to explore current developments of Open Source hardware and software to build a low-cost platform consisting of the car chassis/framework, sensors, and software for the autopilot. Our research will allow other students with low budget to enter into the world of Deep Learning, self-driving cars, and autonomous cars racing competitions.

A New Synthesized Microalloys Steel Ods Of High Amplitude Ultrasonically Irradiation, Marzuki Silalahi, Hanif Abdurrahman Wicaksana, Ferhat Aziz, Syahfandi Ahda, Mohamad Riza Iskandar

Makara Journal of Technology

Micropowders of oxide-dispersion-strengthened (ODS) steel have been synthesized using the ultrasonic irradiation method with variations in amplitude. The ultrasonic irradiation process is performed for 50 h at a frequency of 20 kHz with 40%, 50%, and 60% amplitudes in toluene solution. The formation of Fe-Cr microalloys in the preparation of Fe- 15Cr-0.5Y2O3 powder was analyzed using SEM-EDS, X-ray diffraction (XRD), and TEM-EDS. The percentage of Fe- Cr phase mass fraction of ODS steel micropowder formed during ultrasonic irradiation with 40%:50%:60% amplitude was 12.2%:34.1%:22.1%, with 25.67:77.02:38.51 nm crystallite size. The crystallite size at 50% amplitude was the largest, and the diffusion …

Comprehensive Inspection On The Experimental Ferritic Stainless Steel By Means Of Transmission Electron Microscopy And Neutron Diffraction Techniques, Parikin Parikin, Mohammad Dani, Riza Iskandar, Aziz Khan Jahja, Andon Insani, Joachim Mayer

Makara Journal of Technology

The field of physical metallurgy is one of the primary beacons that guide alloy developments for multipurpose materials such as the in-core structure materials for pressure vessel components and heat exchangers. The surface microstructure of new ferritic steel with significant local constituent materials was characterized by high resolution powder neutron diffractometer (HRPD) and transmission electron microscope (TEM), combined with the energy dispersive X-ray spectroscopy (EDX). The alloy contains73% Fe, 24% Cr, 2% Si, 0.8% Mn, and 0.1% Ni, in %wt. The charge materials were melted by the casting techniques. The neutron diffractograms obtained shows five dominant diffraction peaks at (110), …

Study On Antibacterial Of Chitosan/Hydroxyapatite Doped Magnesium Composite As A Material For Bone Graft Applications, Andromeda Dwi Laksono, Teodoro A. Amatosa, Jr., Hilda Pebrianti Octaviana Sitorus, Wentika Putri Kusuma Asih, Sulistijono Sulistijono

Makara Journal of Technology

Hydroxyapatite (HAp) is one of the constituent minerals of bone and teeth, that has been widely used for synthesizing bone graft. Due to the limitation on properties of the hydroxyapatite, it is doping with Magnesium (HAp-Mg). The addition of Chitosan (Chi) was expected to improve the antibacterial properties of HAp-Mg. The present research aims to study the influence of Chitosan with 0, 5, 15, and 25 wt% addition on biocompatibility properties of Chi/HAp-Mg composite. HAp-Mg was synthesized using the sol-gel method; meanwhile, Chi/HAp-Mg composite was manufactured by mixing Chitosan in acetic acid, and HAp-Mg was added into the mixture. The …

Evaluation Of Primal-Dual Splitting Algorithm For Mri Reconstruction Using Spatio-Temporal Structure Tensor And L1-2 Norm, Mia Rizkinia, Masahiro Okuda

Makara Journal of Technology

Magnetic resonance imaging (MRI) is an essential medical imaging technique which is widely used for medical research and diagnosis. Dynamic MRI provides the observed object visualization through time and results in a spatiotemporal signal. The image sequences often contain redundant information in both spatial and temporal domains. To utilize this characteristic, we propose a spatio-temporal reconstruction approach based on compressive sensing theory. We apply spatio-temporal structure tensor using nuclear norm, in addition to the wavelet sparsity regularization. The spatio-temporal structure tensor is a matrix that consists of gradient components of the MRI data w.r.t the spatial and temporal domains. For …

Influence Of Nh4f In Dextran Based Biopolymer Electrolytes: Conductivity And Electrical Analysis, Muhamad Hafiz Hamsan, Mohd Fakhrul Zamani Kadir, Shujahadeen Bakar Aziz, Muhammad Amirul Solihin Azha, Saifful Kamaluddin Muzakir

Makara Journal of Technology

Dextran polymer host was doped with different concentrations of ammonium fluoride (NH4F) via casting technique. In this present work, dextran-NH4F film has been employed to investigate the ionic conductivity using electrochemical impedance spectroscopy from 50 to 5 MHz. The highest room temperature conductivity is achieved at (2.33 ± 0.76) × 10-3 S cm-1 with 40 wt.% NH4F. The electrolyte is found to obey Arrhenius rule at high temperature with activation energy of 0.21 eV. Dielectric analysis has been performed to obtain better understanding on the conductivity pattern. The dielectric parameters e.g. ɛreal, ɛimag, Mreal, and Mimag have been tested as …

Acute Toxicitystudy Of Choline Based Ionic Liquids Towards Danio Rerio Fish And The Aggregation Behavior Of Their Binary Mixtures, Mansoor Ul Hassan Shah, Nasruddin Nasruddin, Suzana Bt Yusup, Muhammad Moniruzzaman

Makara Journal of Technology

Marine oil spills are effectively controlled by chemical dispersants. However, the toxicity associated with it reduce its employment in marine environment. To overcome this limitation, the acute toxicity of choline based ionic liquids was evaluated as a potential low toxic variant for oil spill remediation. Further, the aggregation behavior of the individual as well as their binary mixtures was also evaluated by employing tensiometry technique. The half-lethal concentration, LC50on zebrafish (Danio rerio) of three choline based ionic liquids showed that the studied ionic liquids (ILs) fall in the range of “practically nontoxic” ( 100-1000 mg L-1).Various micellar properties showed that …

Neutron Diffraction Study Of Multiferroic 0.6nife2o4/0.4batio3 Composite, Engkir Sukirman, Yosef Sarwanto, Syahfandi Ahda, Andon Insani

Makara Journal of Technology

Neutron diffraction study on the 0.6NiFe2O4/0.4BaTiO3 multiferroic composite has been carried out. The 0.6NiFe2O4/0.4BaTiO3 multiferroic composites have been synthesized by solid reaction method. In this study, 20 g of BaTiO3 (BTO) and 20 g of NiFe2O4 (NFO) compounds were prepared from the powder raw materials of BaO3 and TiO2 for BTO, and NiO and Fe2O3 for NFO. Furthermore, both BTO and NFO were each crushed for 5 hours using High Energy Milling (HEM). Then the BTO and NFO were calcined in the furnace at 950 °C/5 hours and 900 °C/5 hours, respectively. Both NFO and BTO precursors were manually mixed …

An Approach To Fast Multi-Robot Exploration In Buildings With Inaccessible Spaces, Matt Mcneill, Damian Lyons

Faculty Publications

The rapid exploration of unknown environments is a common application of autonomous multi-robot teams. For some types of exploration missions, a mission designer may possess some rudimentary knowledge about the area to be explored. For example, the dimensions of a building may be known, but not its floor layout or the location of furniture and equipment inside. For this type of mission, the Space- Based Potential Field (SBPF) method is an approach to multirobot exploration which leverages a priori knowledge of area bounds to determine robot motion. Explored areas and obstacles exert a repulsive force, and unexplored areas exert an …