Geotechnical Engineering Commons^™

Failure Of The Alexander Dam Embankment And Reconstruction Using Drainage Mitigation On Kauai, Hawaii, 1930-1932, Kerry D. Cato, J. David Rogers

Geosciences and Geological and Petroleum Engineering Faculty Research & Creative Works

Alexander Dam is a hydraulic fill earth dam and the second-highest embankment dam in Hawaii, having been built in 1929-1932 on the south side of the Hawaiian island of Kauai to provide irrigation for McBryde Sugar Company Ltd. It was constructed across Wahiawa Stream mauka (Hawaiian for "stream that comes from the mountains," literally "toward the mountains"), upstream of Kalaheo, to store 800 million gallons (5 million m3) of water to irrigate sugarcane fields. The embankment dam was intended to have a maximum height of 125 ft (38 m), a crest length of 620 ft (189 m), and a maximum …

John Frank Stevens: Panama Canal Mastermind And Pioneering Railroad Pathfinder, J. David Rogers, Lawrence M. Magura

Geosciences and Geological and Petroleum Engineering Faculty Research & Creative Works

John Frank Stevens began his civil engineering career as a rodman on a survey crew in Maine in 1872. He soon moved to Minneapolis, where he apprenticed himself, eventually becoming Assistant City Engineer. In 1876 he began working for railroads in the western United States. In 1882 Stevens began working for a contractor laying tracks for the Canadian Pacific Railroad in Saskatchewan. The next spring he became assistant engineer of location for the Canadian Pacific, completing the first transcontinental line linking Montreal with Vancouver in 1888. In 1889 James Jerome Hill retained Stevens as chief pathfinder for the new Great …

Performance Of The Grout Curtain At The Kentucky River Lock And Dam No. 8, Robert C. Hatton

Theses and Dissertations--Civil Engineering

Karst bedrock conditions and deterioration of the lock and dam structures have resulted in significant leakage through, underneath, and around Lock and Dam No. 8 on the Kentucky River. During severe droughts, the water surface in Pool No. 8 has been observed to drop below the crest of the dam, resulting in water supply shortages and water quality issues for surrounding communities reliant on the pool. Presently, the primary purpose of Lock and Dam No. 8 is water supply. Pool No. 8 is currently where the cities of Nicholasville (Jessamine County, KY) and Lancaster (Garrard County, KY) draw their water. …

Performance Of Two Tieback Walls And Rock Anchors In A Shale Stratum, Jorge Octavio Romana Giraldo

Theses and Dissertations--Civil Engineering

Tieback walls are typically design based on predetermined pressure distribution; however, these pressures were proposed based on performance of excavations. For retaining walls used in slope remediation, the application of these pressures might not be adequate; the construction procedure; therefore, a different response of the wall is expected. This document, presents the performance of two tieback walls installed in a shale stratum. Monitored responses is correlated with construction activities; these activates implied excavation and backfilling in both of the tieback walls. In addition, this research shows a numerical procedure to evaluate the anchor capacity based on the t- z approach. …

Direct Measurement Of Crosstie-Ballast Interface Pressures Using Granular Material Pressure Cells, Travis James Watts

Theses and Dissertations--Civil Engineering

The magnitudes and relative pressure distributions transmitted to the crosstie-ballast interface of railroad track significantly influences the subsequent behavior and performance of the overall track structure. If the track structure is not properly designed to distribute the heavy-axle loads of freight cars and locomotives, deficiencies and inherent failures of the crossties, ballast, or underlying support layers can occur, requiring substantial and frequent maintenance activities to achieve requisite track geometrical standards. Incorporating an understanding of the pressure distribution at the crosstie-ballast interface, appropriate designs can be applied to adequately provide a high performing and long-lasting railroad track. Although this can be …

Hydrologic Monitoring And 2-D Electrical Resistivity Imaging For Joint Geophysical And Geotechnical Characterization Of Shallow Colluvial Landslides, Matthew M. Crawford

Theses and Dissertations--Earth and Environmental Sciences

Landslide characterization and hazard assessments require multidisciplinary approaches that connect geologic processes with geotechnical parameters. Field monitoring of hydrologic variables such as water content and water potential, coupled with geoelectrical measurements that can establish relationships used for geotechnical and landslide hazard investigations is deficient.

This study brings together different techniques to develop a methodology that connects geoelectrical measurements and shear strength. A field-based framework was established that includes (1) analysis of long-term soil moisture fluctuations within different landslides (2) establishment of constitutive and new equations that test the use of electrical conductivity to predict soil-water relationships and shear strength (3) …

Stability Analysis And Design Charts For A Sandy Soil Slope Supporting An Embedded Strip Footing, Emmanuel Baah-Frempong, Sanjay Kumar Shukla

Research outputs 2014 to 2021

In several field situations, especially in the hilly terrains, the construction of footings on slopes becomes essential. The factor of safety of a slope supporting a loaded footing on the crest is dependent on the position of the footing from the crest edge. Most studies in the past have focused on analysing the bearing capacity and settlement behaviour of a footing resting on a slope crest, but foundations in most infrastructure projects are usually built at some depth below the ground surface. Therefore, the availability of some form of design charts for determining the factor of safety of a slope …

Imaging The Subsurface In Eastern Part Of Lake Chesterfield Using A Combination Of Geophysical Tools, Jiawei Li

Masters Theses

"The Lake Chesterfield North Dam in Wildwood city, Missouri has been leaking, more or less continuously since the dam was constructed in 1986 despite mitigation efforts in 1988, 1994, 1995, 2004, and 2005. Neither the grouting efforts in 1988, 1994, 1995, 2004 or 2005, nor the placement and rehabilitation of an impervious clay liner in 2005 has solved the problem. Indeed, in June of 2017, the water level in Lake Chesterfield dropped at an alarmingly rapid rate.

Prior to authorizing additional mitigation work, the Lake Chesterfield Home Owners Association (LCHOA) decided to acquire geophysical data across the dry lake bed. …

Experimental Study Of Hydraulic Conductivity Of A Soil-Bentonite Cutoff Wall, Landon Crawford Barlow

Master’s Theses

Soil-bentonite (SB) cutoff walls are commonly employed in the US to control groundwater flow and subsurface contaminant migration. In these applications, both the short-term (as built) integrity of the barrier and the potential for degradation in the integrity of the barrier over time are of critical importance. Although many laboratory studies have been conducted to investigate the performance of SB cutoff walls as hydraulic barriers and the various factors affecting this performance, field investigations are scarce. With support from the National Science Foundation, a 200 m long, 7 m deep, and 0.9 m wide SB cutoff wall has been designed, …

Effects Of Gradation And Moisture Content On Resistivity Of Mechanically Stabilized Earth Wall Backfill Materials, Jose Luis Arciniega

Open Access Theses & Dissertations

The service life of mechanically stabilized earth (MSE) walls depends on the corrosion rate of the metallic reinforcement used in their construction. The resistivity of the backfill aggregates needs to be measured accurately in order to estimate realistically the corrosion rate of the reinforcement. Resistivity testing is usually performed using the traditional soil box on the portion of the aggregates that passes a No. 10 or No. 8 sieve to either select or reject the backfill. For a more reasonable characterization of the corrosivity of coarse backfills, it is desirable to use their actual gradations. To that end, several resistivity …

Back Calculation Of Intelligent Compaction Data For Mechanical Properties Of Soil System, Afshin Gholamy

Open Access Theses & Dissertations

For national economy, it is very important to have a reliable infrastructure. Because of this, all over the world, new roads are constantly being built and old roads are being maintained and, if necessary, expanded and/or repaired. Building a good quality road is very expensive, it costs several million dollars per kilometer. It is therefore crucial to make sure that the newly built and newly repaired roads are sufficiently stiff - so that they can withstand the predicted volume of traffic for a sufficient number of years. Current methods of estimating the stiffness are time-consuming and labor-consuming. The most accurate …

Onshore-Offshore Velocity Models North Of The Mendocino Triple Junction In Northern California, Alan Jacquez

Open Access Theses & Dissertations

The Mendocino Triple Junction (MTJ) marks the boundary where the Gorda plate, North American Plate, and Pacific Plate meet, separating the Cascadia subduction zone to the North from transform tectonics of the San Andreas plate boundary. This actively deforming region experiences high seismic activity and young geological features. Here we examine offshore and onshore seismic wide-angle reflection and refraction data north of the MTJ crossing the Cascadia subduction zone from offshore northern California to the Western edge of the Sierra Nevada. We image subsurface structures in this region by creating P-wave velocity models using datasets collected in 1993 to 1994 …

Geospatial Relationship Of Intelligent Compaction Measurement Values With In-Situ Testing For Quality Assessment Of Geomaterials, Luis Alberto Lemus

Open Access Theses & Dissertations

The implementation of Intelligent Compaction (IC) in the construction of transportation infrastructure as a tool for quality control of compacted geomaterials has attracted the attention of a number of highway agencies. Compaction quality has been conventionally assessed using density, and to a less extent, modulus-based spot measurements at selected locations along the roadway section. While spot measurements do not provide a thorough rendition of the level of compaction of the roadway, IC technology is effective in meeting full coverage requirements. IC roller measurements are accelerometer-based measurements recording machine-ground interaction assumed to be indicative of the stiffness of the compacted geomaterial. …

Evaluation Of Recycled Gypsum Application Dosages To Enhance The Water Infiltration Rate At Water Retention Ponds, Jorge Luis Navarrete

Open Access Theses & Dissertations

The retention ponds play central role for efficient collection, removal, and drainage of rainfall runoff from surrounding streets to minimize flooding and damage. However, low percolating retention ponds may result in an extended ponding of water, abundance bacteria accumulations, mosquito breeding, environmental hazards, among others. The presence of clayey soils and soil sodicity reduces infiltration rates of retention ponds. To enhance the infiltration rate of ponds, it is proposed to use recycled gypsum (RG), as a soil amendment in retention ponds consisting of clayey soils to enhance low infiltration rates.

To evaluate the influence of RG in clayey soils as …

Assessment Of Backfill Hydraulic Conductivity In An Instrumented Soil-Bentonite Cutoff Wall, Landon Barlow, Michael A. Malusis

Faculty Conference Papers and Presentations

The objective of this paper is to present a comparison of measured hydraulic conductivities (k) for soil-bentonite (SB) backfill within a 60-m-long section of a 200-m-long, 7-m-deep cutoff wall constructed and instrumented for studying SB backfill properties and variability at the field scale. Backfill k was measured using flexible-wall tests (70-mm diameter) on remolded specimens prepared from surface grab samples collected during construction; flexible-wall tests on undisturbed specimens collected from the wall; larger-scale rigid-wall tests (150-mm diameter) on remolded specimens prepared from grab samples; and slug tests conducted within the wall. Applied effective stresses in the laboratory tests …

Probabilistic Regional Landslide Hazard Assessment For The Enguri Dam (Jivari, Georgia), Maria Diletta Acciaro

Dissertations, Master's Theses and Master's Reports

The Enguri Dam forms a reservoir in a seismically active area in the foothills of the Caucasus Mountain range near Jvari, Georgia. The slopes are steep, highly fractured, and weathered, which make them at risk to failure during or following extreme rainfall events. Hydroelectricity produced by the water retained by the 271-m dam provides almost half of the electricity for the country. The reservoir perimeter is more than 40 km and the surrounding slopes span an area of more than 30 km2. The size of the area and paucity of slope data have made slope-failure hazard assessment of the broader …

Analyzing The Life-Cycle Of Unstable Slopes Using Applied Remote Sensing Within An Asset Management Framework, El Hachemi Y. Bouali

Dissertations, Master's Theses and Master's Reports

An asset management framework provides a methodology for monitoring and maintaining assets, which include anthropogenic infrastructure (e.g., dams, embankments, and retaining structures) and natural geological features (e.g., soil and rock slopes). It is imperative that these assets operate efficiently, effectively, safely, and at a high standard since many assets are located along transportation corridors (highways, railways, and waterways) and can cause severe damage if compromised. Assets built on or around regions prone to natural hazards are at an increased risk of deterioration and failure. The objective of this study is to utilize remote sensing techniques such as InSAR, LiDAR, and …

Soil Improvement Using Microbial Induced Calcite Precipitation And Surfactant Induced Soil Strengthening, Matthew P. Davies

UNF Graduate Theses and Dissertations

Microbially induced calcite precipitation (MICP) has been used for a number of years as a technique for the improvement of various geological materials. MICP has been used in a limited capacity in organic rich soils with varying degrees of success. Investigators hypothesized that microbially-induced cementation could be improved in organic soils by using a surfactant. Varying amounts of Sodium Dodecyl Sulfate (SDS) were added to soils of varying organic content and a mixing procedure was used to treat these soils via MICP. Treated specimens were tested for unconfined compressive strength (UCS). Results appeared to show direct relationships between SDS content …

Potential Replacement Of The Us Navy's Rapid Penetration Test With The Method Of Multichannel Analysis Of Surface Waves, William Fletcher

UNF Graduate Theses and Dissertations

The United States Navy (USN) currently utilizes a Rapid Penetration Test (RPT) on both land and in water as the means to determine whether sufficient soil bearing capacity exists for piles in axial compression, prior to construction of the Elevated Causeway System (Modular) [ELCAS(M)] pile-supported pier system. The USN desires a replacement for the RPT because of issues with the method incorrectly classifying soils as well as the need to have a less labor-and-equipment-intensive method for geotechnical investigation.

The Multichannel Analysis of Surface Waves (MASW) method is selected herein as the potential replacement for the RPT. The MASW method is …

Development Of Forward And Inversion Schemes For Cross-Borehole Ground Penetrating Radar, Donald Jones

UNF Graduate Theses and Dissertations

Tomography is an imaging technique to develop a representation of the internal features of material using a penetrating wave, such as an electromagnetic wave. The calculation method used is an example of an inverse problem, which is a system where the input and the output are known but the internal parameters are not. These parameters can be estimated by understanding the responses of a penetrating wave as it passes through the unknown media. A forward problem is just the opposite; the internal structure and input penetrating wave is known and the output is determined. For both forward and inverse problems, …

Tire-Derived Geo-Cylinders And Polymer Products For Enhancing The Properties Of Base/Sub Base Materials In Pavement Systems, Justin Scott Smith

Graduate Theses, Dissertations, and Problem Reports (ETD)

As a critical part of the transportation network, pavements offer a safe means for vehicular traffic. Pavements are subjected to many forms of stress during their service life, and they are susceptible to environment related cracking and failures. Failures can be attributed to poor subgrade, freeze-thaw variations, and fatigue under repetitive axle loadings. Reinforcement products such as tire-derived geo-cylinders (TDGC) which make-up mechanical concrete and geo-polymers have been utilized in civil engineering practice, and this research aims to understand the potential life of tested pavement system components set at displacement limitations when reinforced with TDGCs and geo-polymers from exposure to …

Microfluidic Pore Model Study On Physical And Geomechanical Factors Influencing Fluid Flow Behavior In Porous Media, Shuang Cao

LSU Doctoral Dissertations

Fluid flow in porous media is a subject of fundamental importance and relevant to numerous engineering applications. The comprehensive description of fluid interaction parameters containing wetting properties, fluid-fluid displacement ratio, and capillary pressure, are inevitably needed. Moreover, the fine-grained sediments’ response to various pore fluids and migration in porous media influences reservoir geomechanical properties and pore clogging is essential to a better understanding of fluids flow behavior.

This dissertation provides a detailed study of physical and geomechanical factors influencing fluids flow behavior in porous media. The two-dimensional micromodel tests have been conducted under a wide selection of fluids flow conditions. …

Agenda For The Fifth Meeting Of The Forum On Soil Dynamics, Shamsher Prakash

Forum for Promotion of Soil Dynamics in India

No abstract provided.

Membership Of Forum For Promotion Of Soil Dynamics In India, Shamsher Prakash

Forum for Promotion of Soil Dynamics in India

No abstract provided.

Minutes Of The Fifth Meeting Of The Forum For Promotion Of Soil Dynamics In India, Shamsher Prakash

Forum for Promotion of Soil Dynamics in India

No abstract provided.

Development Of Design Equations For Drilled Shafts In Granular Dense Soils Using Dem Simulations, Sadia Faiza

Civil Engineering ETDs

Drilled shafts have proven to be cost-effective, excellent performing, deep foundation systems where large loads and lateral resistance are major factors. The available design methods that are recommended by FHWA (2010) for drilled shafts are mostly empirical and are developed based on generalized data which sometimes can be conservative for a particular soil. The main objective of this study is to develop a design methodology for estimating the side resistance of an axially loaded drilled shaft based on the current and the unique properties of the soil. The objective was met through using the discrete element method (DEM) to investigate …

Characterization And Modeling Of Asphalt Concrete For Dynamic Properties And Performances, A S M A. Rahman

Civil Engineering ETDs

The recently developed mechanistic-empirical pavement design guide (MEPDG, also known as Pavement M-E design method) uses the nationally calibrated, binder viscosity-based dynamic modulus predictive model for the design and analysis of asphalt pavements. In this study, this model is assessed for its appropriateness for asphalt-aggregate mixtures typically used in New Mexico. In essence, this study investigates the predictability issue of complex modulus of New Mexico mixes. A total of 54 Superpave mixes with different aggregate gradations, air voids, and binder grades were collected from the mixing plants and from the pavement construction sites. The loose asphalt mixtures were then compacted, …

Amplification Of Earthquake Ground Motions In Washington, Dc, And Implications For Hazard Assessments In Central And Eastern North America, Thomas L. Pratt, J. Wright Horton Jr., Jessica Munoz, Susan E. Hough, Martin C. Chapman, C. Guney Olgun

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

The extent of damage in Washington, DC, from the 2011 M_W 5.8 Mineral, VA, earthquake was surprising for an epicenter 130 km away; U.S. Geological Survey “Did-You-Feel-It” reports suggest that Atlantic Coastal Plain and other unconsolidated sediments amplified ground motions in the city. We measure this amplification relative to bedrock sites using earthquake signals recorded on a temporary seismometer array. The spectral ratios show strong amplification in the 0.7 to 4 Hz frequency range for sites on sediments. This range overlaps with resonant frequencies of buildings in the city as inferred from their heights, suggesting amplification at frequencies to …

Reliability-Based Designs Procedure Of Earth Retaining Walls In Geotechnical Engineering, Juan Camilo Viviescas, Juan Pablo Osorio, Julio E. Canon

Articles

The design and construction of foundations, retaining structures and slopes are usually based on deterministic formulations that do not allow the distinction between the natural variability and the inherent dispersion in the geotechnical parameters. Due to the inherent variability of the soil properties, there is a growing trend to implement reliability-based designs in geotechnical engineering to reduce design uncertainties by probabilistic methods. The reliability designs require the definition of the probability density functions of the geotechnical properties, as well as knowledge of the spatial variability of soils. This paper identifies the procedures, type of soil investigations, simulations and the most …

Development Of An Internal Camera-Based Volume Determination System For Triaxial Testing, Sean Elliott Salazar

Graduate Theses and Dissertations

Accurate measurement of axial, radial, and volumetric strain parameters are critical to the understanding of phase relationships and the constitutive behavior for saturated and unsaturated soils. The use of photographic monitoring techniques for laboratory-based measurement of these parameters have become common. A novel technique that utilized camera instrumentation located within the triaxial testing cell was developed and validated. By placing the instrumentation inside of the cell, instead of the instrumentation being located outside of the cell, the technique eliminated cumbersome corrections required to account for optical distortions due to 1) the refraction of light at the confining fluid-cell wall-atmosphere interfaces, …