Open Access. Powered by Scholars. Published by Universities.®

Geotechnical Engineering Commons

Open Access. Powered by Scholars. Published by Universities.®

Michigan Technological University

Discipline
Keyword
Publication Year
Publication
Publication Type

Articles 1 - 16 of 16

Full-Text Articles in Geotechnical Engineering

Performance Comparison Of A Low Mass Vibratory Lunar Surface Compactor In Vacuum Versus Atmosphere, Robin D. Austerberry Jan 2026

Performance Comparison Of A Low Mass Vibratory Lunar Surface Compactor In Vacuum Versus Atmosphere, Robin D. Austerberry

Dissertations, Master's Theses and Master's Reports

As space agencies prepare to return to the moon, an emphasis is being placed on establishing a sustained human presence that requires permanent structures and supporting infrastructure, making site preparation a critical factor. Michigan Technological University’s Planetary Surface Technology Development Lab has developed a novel low-mass surface compaction tool for use on a site preparation vehicle in collaboration with Colorado School of Mines. Testing in vacuum is necessary to simulate a relevant environment, which is required to increase the technology readiness level of this tool to TRL 5. Testing concluded significant interactions between the presence of atmosphere and other factors. …


Potential Of Stamp Sands As Cemented Tailings, Samuel Sukaria Jan 2026

Potential Of Stamp Sands As Cemented Tailings, Samuel Sukaria

Dissertations, Master's Theses and Master's Reports

Worldwide mine tailings ponds and reservoirs occupy some 534 billion m3 of space with the volume expected to increase as economic demand for minerals increases over the next decades. These reservoirs produce adverse effects on local communities and ecosystems through structural failure resulting in mass flooding events, drainage of pollutants into water supply and emissions of airborne particulate matter. Methods developed to find use for tailings include extraction of residual minerals and aggregates in construction materials. The latter method has already been used in mining operations to stabilize mining reservoirs and stopes, and as placement for temporary road work …


Modeling And Testing Chain Trencher Excavator And Cone Penetrometer Robotic Prospecting Systems For Lunar In-Situ Resource Utilization, Marcello C. Guadagno Jan 2026

Modeling And Testing Chain Trencher Excavator And Cone Penetrometer Robotic Prospecting Systems For Lunar In-Situ Resource Utilization, Marcello C. Guadagno

Dissertations, Master's Theses and Master's Reports

The Artemis Missions aim to establish a sustained human presence on the Moon, requiring In-Situ Resource Utilization (ISRU) of water-ice deposits in permanently shadowed regions. Two critical capabilities must be developed to enable ISRU at scale: prospecting instruments that can characterize the spatial distribution and geotechnical properties of icy regolith in situ, and excavation systems that can extract hardened icy regolith efficiently. This dissertation addresses both needs through the development and testing of a Percussive Heated Cone Penetrometer (PHCP) for geotechnical prospecting and a chain trencher excavator for icy regolith mining.

The PHCP was developed across eight design iterations and …


Estimating Unconfined Compressive Strength (Ucs) Of Rocks From Measurement While Drilling (Mwd) Data, Can Erdem Jan 2025

Estimating Unconfined Compressive Strength (Ucs) Of Rocks From Measurement While Drilling (Mwd) Data, Can Erdem

Dissertations, Master's Theses and Master's Reports

Measurement-while-drilling (MWD) technology enables the real-time monitoring of drilling parameters during the drilling process. MWD data can provide valuable insight into the mechanical behavior of intact rocks and rock masses, which is essential for geotechnical applications such as foundation design and underground construction. The aim of this study is to correlate real-time drilling parameters, recorded using a laboratory-developed MWD system, with the unconfined compressive strength (UCS) of rocks. A custom laboratory MWD system was designed to simultaneously record four key drilling parameters: thrust (axial force, crowd), torque, penetration rate, and rotational speed. The custom-built MWD system was used to continuously …


Development And Testing Of A Low Mass Vibratory Lunar Compactor, Charles Carey Jan 2023

Development And Testing Of A Low Mass Vibratory Lunar Compactor, Charles Carey

Dissertations, Master's Theses and Master's Reports

NASA and other agencies are working to return to the moon, with the Artemis Program [1]. As a part of this new effort, an emphasis is being placed on having a sustained presence, building lunar bases and other permanent structures. The development of such infrastructure will require the development of civil engineering structures, and site preparation becomes a necessity. The Planetary Surface Technology Development Laboratory is developing a low mass lunar compactor as part of an autonomous site preparation vehicle in partnership with Colorado School of Mines, funded by NASA’s 2021 Lunar Surface Technology Research grant. The low mass lunar …


Image-Data-Driven Deep Learning For Slope Stability Analysis, Behnam Azmoon Jan 2022

Image-Data-Driven Deep Learning For Slope Stability Analysis, Behnam Azmoon

Dissertations, Master's Theses and Master's Reports

Landslides cause major infrastructural issues, damage the environment, and cause socio-economic disruptions. Therefore, various slope stability analysis methods have been developed to evaluate the stability of slopes and the probability of their failure. This dissertation attempts to take advantage of the recent advancements in remote sensing and computer technology to implement a deep-learning-based landslide prediction method.

Considering the novelty of this approach, this dissertation leads with proof-of-concept studies to evaluate and establish the suitability of deep learning models for slope stability analysis. To achieve this, a simulated 2D dataset of slope images was created with different geometries and soil properties. …


Micromechanical Prediction Model Of Viscoelastic Properties For Asphalt Mastic Based On Morphologically Representative Pattern Approach, Zhichen Wang, Naisheng Guo, Xu Yang, Shuang Wang Jan 2020

Micromechanical Prediction Model Of Viscoelastic Properties For Asphalt Mastic Based On Morphologically Representative Pattern Approach, Zhichen Wang, Naisheng Guo, Xu Yang, Shuang Wang

Michigan Tech Publications, Part 1

This paper is devoted to the introduction of physicochemical, filler size, and distribution effect in micromechanical predictions of the overall viscoelastic properties of asphalt mastic. In order to account for the three effects, the morphologically representative pattern (MRP) approach was employed. The MRP model was improved due to the arduous practical use of equivalent modulus formula solution. Then, a homogeneous morphologically representative model (H-MRP) with the explicit solution was established based on the homogenization theory. Asphalt mastic is regarded as a composite material consisting of filler particles coated structural asphalt and free asphalt considering the physicochemical effect. An additional interphase …


Investigation Of Long Term Pillar Stability In An Abandoned Gypsum Mine Based On Dissolution Models, Mohammadhossein Sadeghiamirshahidi Jan 2019

Investigation Of Long Term Pillar Stability In An Abandoned Gypsum Mine Based On Dissolution Models, Mohammadhossein Sadeghiamirshahidi

Dissertations, Master's Theses and Master's Reports

The abandoned Domtar Mine in Grand Rapids, MI underlies Interstate I-196. The mine operated for over 140 years, mining a 30-meter-deep, four-meter thick gypsum seam. In 2000, the mine was abandoned with the removal of the mine’s dewatering pumps allowing groundwater to flood the mine. The initial flooding resulted in saturating the mine pillars along with some amount of pillar dissolution. Overtime, gypsum dissolution would cease as the water becomes saturated with the gypsum dissolution products. The mine, however, is located adjacent to the Grand River and has groundwater moving through the mine resulting in the potential for continuing dissolution. …


Probabilistic Regional Landslide Hazard Assessment For The Enguri Dam (Jivari, Georgia), Maria Diletta Acciaro Jan 2018

Probabilistic Regional Landslide Hazard Assessment For The Enguri Dam (Jivari, Georgia), Maria Diletta Acciaro

Dissertations, Master's Theses and Master's Reports

The Enguri Dam forms a reservoir in a seismically active area in the foothills of the Caucasus Mountain range near Jvari, Georgia. The slopes are steep, highly fractured, and weathered, which make them at risk to failure during or following extreme rainfall events. Hydroelectricity produced by the water retained by the 271-m dam provides almost half of the electricity for the country. The reservoir perimeter is more than 40 km and the surrounding slopes span an area of more than 30 km2. The size of the area and paucity of slope data have made slope-failure hazard assessment of the broader …


Analyzing The Life-Cycle Of Unstable Slopes Using Applied Remote Sensing Within An Asset Management Framework, El Hachemi Y. Bouali Jan 2018

Analyzing The Life-Cycle Of Unstable Slopes Using Applied Remote Sensing Within An Asset Management Framework, El Hachemi Y. Bouali

Dissertations, Master's Theses and Master's Reports

An asset management framework provides a methodology for monitoring and maintaining assets, which include anthropogenic infrastructure (e.g., dams, embankments, and retaining structures) and natural geological features (e.g., soil and rock slopes). It is imperative that these assets operate efficiently, effectively, safely, and at a high standard since many assets are located along transportation corridors (highways, railways, and waterways) and can cause severe damage if compromised. Assets built on or around regions prone to natural hazards are at an increased risk of deterioration and failure. The objective of this study is to utilize remote sensing techniques such as InSAR, LiDAR, and …


Lakebed Characterization Using Side-Scan Data For Investigating The Latest Lake Superior Coastal Environment Conditions, Hasan Salih Kulunk Jan 2017

Lakebed Characterization Using Side-Scan Data For Investigating The Latest Lake Superior Coastal Environment Conditions, Hasan Salih Kulunk

Dissertations, Master's Theses and Master's Reports

This thesis provides a review of the development of hydrographic survey equipment and supporting geospatial equipment and technology such as GPS. Using SonarWiz, a sonar image processing software package, lakebed classification methodologies were evaluated for mapping Buffalo Reef in Lake Superior located near Gay, Michigan. The goal was to develop an approach to mapping the reef bed and delineating various components of the lake bottom, including stamp sands, which are migrating from the abandoned Gay copper processing stamp mill to the reef. This contamination of the reef is having an adverse effect on habitats important to local flora and fauna. …


Air Injection As A Scour Countermeasure At Bridge Piers, Ravi Teja Reddy Tippireddy Jan 2017

Air Injection As A Scour Countermeasure At Bridge Piers, Ravi Teja Reddy Tippireddy

Dissertations, Master's Theses and Master's Reports

Local scour is a major cause of concern for the stability of bridge piers and the safety of the public using the bridges. Structural countermeasures and flow-altering devices have been developed to deal with local scour. Many armoring structural countermeasures are very effective and efficient in clear water conditions but are susceptible to moving bed forms and leaching. The flow-altering devices are effective in both clear water conditions and moving bed forms, but are prone to clogging, less efficient in changing flow direction, etc. This study aims to reduce the local scour by injecting air in order to reduce the …


Designing A Permeable Reactive Barrier For The Remediation Of Copper Contaminated Groundwater., Christopher Walkons Jan 2016

Designing A Permeable Reactive Barrier For The Remediation Of Copper Contaminated Groundwater., Christopher Walkons

Dissertations, Master's Theses and Master's Reports

This project details the design of a sorption based pilot-scale permeable reactive barrier (PRB) for the removal of copper from groundwater. The reactive material for the barrier is the residual of coagulants used in drinking water treatment operations. Physical and chemical properties of these water treatment residuals (WTR) have been studied to optimize PRB design. Batch reactor tests have shown that equilibrium sorption of copper can be fit to a Langmuir type isotherm. Kinetic and column experiments have been conducted to understand the significance of chemical and physical mass transfer limitations. A leaching test indicated the concentrations of hazardous elements …


A Sustainability-Based Project Selection Algorithm: Socio-Technical-Economic Project Selection (Steps) Algorithm, Bharathi Bhattu Jan 2016

A Sustainability-Based Project Selection Algorithm: Socio-Technical-Economic Project Selection (Steps) Algorithm, Bharathi Bhattu

Dissertations, Master's Theses and Master's Reports

Multi-dimensional aspects play a vital role in the task of project-decision making. Environmental effects are to be considered in addition to other technical and non-technical aspects in order to avoid undue environmental damage. This current work introduces a new decision-making algorithm (Socio-Technical-Economic Project Selection or STEPS) that is demonstrated with the use of RCA (recycled concrete aggregate) as riprap for slope stabilization and erosion control which leaches chemical arsenic when in contact with water. Arsenic has long been recognized for its lethal properties. The main intention of introducing this new algorithm is to use sustainability concepts of social, technical, and …


Dust Susceptibility At Mine Tailings Impoundments: Thermal Remote Sensing For Dust Susceptibility Characterization And Biological Soil Crusts For Dust Susceptibility Reduction, Bonnie Zwissler Jan 2016

Dust Susceptibility At Mine Tailings Impoundments: Thermal Remote Sensing For Dust Susceptibility Characterization And Biological Soil Crusts For Dust Susceptibility Reduction, Bonnie Zwissler

Dissertations, Master's Theses and Master's Reports

Mining operations produce massive volumes of mine tailings, which are deposited as slurry into permanent tailings impoundments. An important and heavily regulated environmental hazard associated with mine tailings impoundments is fugitive dust emissions. Wind erosion of mine tailings impoundments and the resulting dusting events, especially those caused by cold weather dusting, remain an on-going challenge for the mining industry. The overall goal of this research was to develop and evaluate effective, economical, and sustainable solutions to two major issues facing mine tailings impoundments with regards to dusting: (1) dust monitoring/detection and (2) dust reduction/prevention. Specifically, the research studied iron mine …


A Study Of The Impacts Of Freeze-Thaw On Cliff Recession At The Calvert Cliffs In Calvert County, Maryland, Bonnie Elizabeth Zwissler Jan 2013

A Study Of The Impacts Of Freeze-Thaw On Cliff Recession At The Calvert Cliffs In Calvert County, Maryland, Bonnie Elizabeth Zwissler

Dissertations, Master's Theses and Master's Reports - Open

The Calvert Cliffs, which form much of the western coastline of the Chesapeake Bay in Calvert County, Maryland, are actively eroding and destabilizing, resulting in a critical situation for many homes in close proximity to the slope's crest. Past studies have identified that where waves directly interact with the toe of the slope, wave action controls cliff recession; however, where waves do not regularly interact with the slope toe, the past work identified that freeze-thaw controls recession. This study investigated the validity of this second claim by analyzing the recession rate and freeze-thaw behavior of six study sites along the …