Geotechnical Engineering Commons^™

Impact Of Natural Disasters On Construction And Engineering Solutions, Karima Ao Damson

Williams Honors College, Honors Research Projects

This Honors Research Project seeks to research and explain the impact of natural disasters on the construction and reconstruction of infrastructure in countries with the highest risk of natural disasters and compare them to the requirements in the United States in the states most prone to natural disasters. The objectives are to identify the countries most prone to natural disasters, describe the environmental impacts of the natural disasters, describe the impacts on construction and reconstruction requirements, and research whether construction and civil engineering solutions currently applied to the individual countries could be improved or reproduced in other countries exposed to …

Modeling And Testing Chain Trencher Excavator And Cone Penetrometer Robotic Prospecting Systems For Lunar In-Situ Resource Utilization, Marcello C. Guadagno

Dissertations, Master's Theses and Master's Reports

The Artemis Missions aim to establish a sustained human presence on the Moon, requiring In-Situ Resource Utilization (ISRU) of water-ice deposits in permanently shadowed regions. Two critical capabilities must be developed to enable ISRU at scale: prospecting instruments that can characterize the spatial distribution and geotechnical properties of icy regolith in situ, and excavation systems that can extract hardened icy regolith efficiently. This dissertation addresses both needs through the development and testing of a Percussive Heated Cone Penetrometer (PHCP) for geotechnical prospecting and a chain trencher excavator for icy regolith mining.

The PHCP was developed across eight design iterations and …

Investigation Of Temperature, Solution Strength, And Applied Stress Effects On Cation Exchange Processes In Different Geosynthetic Clay Liner Products, Kendra Fuller

Master's Theses

An extensive laboratory test program was conducted to analyze and compare the cation exchange processes in three different varieties of sodium bentonite (Na-B) geosynthetic clay liners (GCLs) over increased conditioning durations up to 32 days and investigate the effects of temperature, solution strength, and applied stress. The goal of this test program was to establish whether the variables of temperature, solution strength, and applied stress improved or degraded the engineering properties of GCLs in laboratory testing and municipal solid waste (MSW) landfill applications. The GCLs were conditioned in liquids of increasing ionic strength, using deionized water and 2, 50, and …

Columbus, Nebraska: Southern Housing Development Design Proposal, Ryan Weyers, Caiden Dynek, Alex Papa, Brexton Robertson, Kaden Perala

Honors Program: Senior Projects (Public)

The following paper proposes the design and creation of a new housing development in the city of Columbus, Nebraska in a lot to the south of the city and directly north of the Columbus wastewater treatment plant. The goal of this proposal is to provide readers with confidence that our company is the most qualified to complete the project and will create the safest, most comfortable, most efficient, and most cost-effective final design. This proposal seeks to offer a solution to the lack of affordable housing for the growing workforce in Columbus. In order to arrive at this solution, each …

Application Of Image Processing In Soil Mechanics, Luke Knodel

Senior Honors Theses

Whenever someone digs a hole in the ground or takes a relaxing walk on the beach, they directly interact with the soil. In its basic form, soil consists of solid, water, and air phases. Unlike water and metals, soil is a particulate media, and the relative proportion of the individual phases significantly influences its physical properties. Various studies have analyzed soil using image processing to determine its morphological properties. Research involving the digital processing of X-ray Computed Tomography (X-ray CT) images of soil to retrieve physically meaningful information is gaining recognition. This study investigates two-dimensional X-ray CT images of unsaturated …

Development Of An Excel Model To Evaluate The Stability Of Slopes, Bradley Davis

All Graduate Plan B and other Reports, Spring 1920 to Spring 2023

This objective of this study is to determine a method or tool for taking given slope stability parameters and quickly and effectively determining the factor of safety against sliding of fully softened slopes. This study evaluates the effects of soil and geometric parameters of common slopes, and models these properties in a hypothetical model. The methodology is based on a parametric analysis using the Spencer’s Method of Slices limit equilibrium analysis used in the computer program Slide2. A parametric analysis is performed to determine which soil and/or geometric properties have a high influence on slope stability. The parametric analysis is …

Continuous Moisture Measurement During Pavement Foundation Construction: Laboratory Measurements, Isaac Esteban Zuniga

Open Access Theses & Dissertations

Moisture content directly affects all properties of subgrade materials. A rapid, continuous, and accurate technique to determine moisture content during subgrade construction is the next step needed to improve the mechanistic-based quality of pavement foundations. In this study, six geomaterials were compacted to standard/modified proctor specifications and subjected to laboratory measurements to study the variations in their electromagnetic and electric properties with moisture content. The relationships between the seismic modulus, unconfined compressive strength, lightweight deflectometer, and moisture content for the same geomaterials were also established. Large-scale replicate specimens were also compacted and subjected to numerous measurements. The dielectric constant measured …

Examining The Use Of Idealized Granular Material In Validated Dem Simulations, Anjana Thoroppady Kittu

Graduate Theses and Dissertations

Discrete element method (DEM) modeling, is becoming widely used for understanding the micro-mechanical behavior of granular materials at the particle level. This dissertation presents important considerations regarding the experimental boundary conditions and idealized granular materials used in DEM validations.

A common issue in DEM validation studies for direct shear and direct simple shear is selecting top and bottom cap boundary conditions that allow for shear transmission while also being efficiently modeled in the DEM simulations. While the traditional grid boundary types used in the laboratory can be replicated in the numerical models, researchers have also used fixed-particle boundaries, sawtooth boundaries, …

Introduction To Infrastructure - The Influence Of Natural Disasters On Infrastructure, Tri Tam Nguyen, Sean M. Raday, Daniel Leverick

STEM Student Research Symposium Posters

In this paper, three major hurricanes in 2017 were examined to determine the damage these hurricanes have done to the infrastructure. Infrastructure has an important role in the nation’s sustained economic development. Infrastructure consists of two main types which are “hard” infrastructure and “soft” infrastructure. Hard infrastructure is the physical networks which include transportation, power, etc. while soft infrastructure is institutions and human capital. Inadequate and inefficient performance of “hard” or “soft” infrastructure would prevent economy from achieving full growth. In the past decades, a significant increase in the number of natural disasters has had great impact on infrastructure systems. …

Geotechnical Properties Of The Travis Peak (Hosston) Formation In East Texas: A Compressive And Tensile Strength Analysis Using Regression Analysis., Pawan Kakarla

Electronic Theses and Dissertations

The estimation of rock mass strength is a key parameter in geotechnical engineering which is used in the design of geotechnical structures like tunnels, dams and slopes. Geotechnical engineering is the branch of civil engineering which works on the principles of soil and rock mechanics to evaluate subsurface conditions, stability of slopes, foundations of structures and construction of earthworks. The main focus of this study was to calculate the strength of Lower Cretaceous Travis Peak Formation rocks of East Texas and to check the accuracy by comparing it with Regression analysis. The parameters which were used were the Uniaxial Compression …

Engineering Performance Of Polymer Amended Soils, Gary E. Welling

Master's Theses

A laboratory test program was undertaken to evaluate a series of engineering properties over a range of soil types; amendment types and addition rates; and moisture contents to enhance understanding of the engineering significance of polymer amendment. Four soils were manufactured and tested with varying ranges of fines and plasticity. A proprietary elastic copolymer was tested at addition rates of 0.5% to 2.5% (dry weight basis). Cement was tested at addition rates of 1% to 4%. Lime was tested at an 8% addition rate. Water addition rates ranged from 4% dry of optimum to 4% wet of optimum. Engineering properties …

Dimensional Stability Of Geosynthetic Clay Liners In Landfill Applications, Gregory R. Olsen

Master's Theses

An investigation was conducted related to the dimensional stability of geosynthetic clay liners (GCLs) in landfill applications. Multiple occurrences of panel separation of overlap seams in GCLs have been documented; however, explanation for the relative contribution of various mechanisms causing shrinkage has been limited. A systematic test program was conducted to determine the effects of a variety of conditions on GCL dimensional stability.

Effects of initial moisture content, permeant type, and overburden pressure were tested by subjecting various GCL products to wet-dry cycles and measuring the dimensional change with each cycle. Different GCL types were each tested under various combinations …

Development Of A High Strain-Rate Constitutive Model For Sands And Its Application In Finite Element Analysis Of Tunnels Subjected To Blast, William T. Higgins Iv

Master's Theses

This thesis describes the development of a constitutive model for simulating the high strain-rate behavior of sands and demonstrates the use of the model by analyzing underground tunnels subjected to blast. The constitutive model is based on the concepts of the critical state soil mechanics and bounding surface plasticity theory. The model captures the behavior of sand under multi-axial loading conditions and predicts both drained and undrained behavior at small and large strains. Perzyna’s overstress theory is incorporated in the model to simulate the viscoplastic behavior of sand under high strain rate. The model follows a nonassociated flow rule.

The …