Geotechnical Engineering Commons^™

A Machine-Learning-Based Systematic Framework For Modeling Compression And Recompression Indices For Florida Soils, Michael Morales

Doctoral Dissertations and Master's Theses

This thesis develops a machine-learning framework for estimating the compression index and the recompression index of Florida soils from routinely measured index properties, and reports two studies that build it. Consolidation settlement design requires both indices, and both are obtained from the incremental-loading oedometer test, which occupies a specimen for one to two weeks; the index tests that accompany it are complete within hours. Empirical correlations have filled that interval since the 1950s, but their coefficients are calibrated on specific soil populations and transfer poorly between regions. The first study analyzes 376 consolidation tests compiled for the Florida Department of …

Impact Of Natural Disasters On Construction And Engineering Solutions, Karima Ao Damson

Williams Honors College, Honors Research Projects

This Honors Research Project seeks to research and explain the impact of natural disasters on the construction and reconstruction of infrastructure in countries with the highest risk of natural disasters and compare them to the requirements in the United States in the states most prone to natural disasters. The objectives are to identify the countries most prone to natural disasters, describe the environmental impacts of the natural disasters, describe the impacts on construction and reconstruction requirements, and research whether construction and civil engineering solutions currently applied to the individual countries could be improved or reproduced in other countries exposed to …

Downdrag Defeated – The Neutral Plane Method, Kyle L. Zak, Min Sang Lee

Civil Engineering Professional Development Seminar

The neutral plane method for evaluating downdrag on deep foundations has been gaining popularity over the past few years. It is a powerful tool that, in many situations, can all but eliminate downdrag concerns on deep foundations. INDOT has allowed its use recently and adapted its forms to accommodate this method. The presentation will cover the theory behind the method and how it can be applied in bridge design. We will then demonstrate how to incorporate the method into the INDOT workflow, and we’ll show a couple real-life examples where the neutral plane method saved the day.

Hickory Street Square Revitalization, Spencer Knight, Grace Dungan, Tim Kula, Evan Lauritsen, Lindsey Mennenga

Honors Program: Senior Projects (Public)

The Hickory Street Square Revitalization Project seeks to transform a central public space in Sidney, Nebraska into a dynamic, community-oriented area that supports local events, economic activity, and cultural heritage. The project addresses six core objectives: 1) convertible street design, 2) parking lot reconfiguration, 3) public amenities, 4) event flexibility, 5) lighting and signage, and 6) old electric plant renovation. A conceptual design was developed by the design team (S.T.E.E.L. Sentinel Solutions) by synthesizing the most effective features of three preliminary alternatives, shaped further through community feedback and evolving project constraints. The final project design minimizes disruption to existing activity …

Software Literacy In Construction, Aidan Cazares

Williams Honors College, Honors Research Projects

The construction industry increasingly relies on software like Bluebeam Revu for their quantity takeoff, document management, and collaboration needs. This project will outline pertinent information obtained through their Bluebeam professional training program and reflect it with a detailed estimate of a real life construct project.

Modeling The Influence Of Internal Factors On Vehicular Mobility Performance, Aziz Mdimi

Tanzania Journal of Engineering and Technology (TJET)

Traffic mobility is significantly influenced by road conditions and the internal factors governing vehicular performance. Internal factors play a crucial role in vehicular mobility, influencing vehicles operate and performance. While existing vehicular mobility models primarily address external factors, external factors such as governor, engine, gear train and differential unit remain underexplored. This study formulates a comprehensive model to address this gap, focusing on the internal components that affect vehicular mobility. The proposed model employs both analytical and numerical methods to derive transfer functions for these subsystems using Matrix Laboratory (MATLAB), aiming to capture the dynamic behavior of vehicles under various …

Demystifying Utility Coordination: Understanding The Basics, Josshe I. Palm

Purdue Road School

This session will explain utility coordination to non-utility coordinators. It will help educate others about the role and responsibilities of a utility coordinator, an OSA, easy UC and design mistakes to avoid, scope and design considerations, items commonly overlooked, when to coordinate SUE, and how to work with your UC to request a letting adjustment. We will also highlight UC submittals and allow time for questions about the UC’s role in a project’s success.

Early-Age Strength And Failure Characteristics Of 3d Printable Polymer Concrete: Numerical Modelling And Experimental Testing, Mohammad Amin Dehghani Najvani

Civil Engineering ETDs

The time-dependent rheological and early-age strength parameters of Polymer concrete (PC) were investigated. PC flow decreased, and the static yield stress and thixotropy increased as the specimen aged, while the dynamic yield stress remained unchanged. The study found that the Herschel-Bulkley model can accurately describe the PC’s rheological behavior over time. The change in cohesion strength and internal friction angle over time was observed using uniaxial unconfined compression and direct shear tests of fresh PC. A time-dependent MohrCoulomb failure criterion was established. Temperature analysis was used to determine the gel time and explain the evolution of the time-dependent early-age strength …

Improving Square Skirted Foundations Behavior On Sand, Tamer Al-Shyoukhi, Ayman Altahrany, Mahmoud Elmeligy

Mansoura Engineering Journal

Shallow foundations' behavior is enhanced by using skirts to confine the soil beneath the foundation. The bearing capacity and settlement of skirted foundations resting on the sand are influenced by the size of the skirt cell and shear strength of sand. Experimental modelling was carried out on an axially square-skirted footing resting on sand in this study. Plaxis-3D software was used for numerical analysis to support the experimental results. The numerical analysis results validated the experimental results. The outcomes of the study demonstrated that skirts wider than the footing size increased the bearing capacity of skirted foundations. In the case …

Columbus, Nebraska: Southern Housing Development Design Proposal, Ryan Weyers, Caiden Dynek, Alex Papa, Brexton Robertson, Kaden Perala

Honors Program: Senior Projects (Public)

The following paper proposes the design and creation of a new housing development in the city of Columbus, Nebraska in a lot to the south of the city and directly north of the Columbus wastewater treatment plant. The goal of this proposal is to provide readers with confidence that our company is the most qualified to complete the project and will create the safest, most comfortable, most efficient, and most cost-effective final design. This proposal seeks to offer a solution to the lack of affordable housing for the growing workforce in Columbus. In order to arrive at this solution, each …

Evaluation Of The Geotechnical And Foundation Components On Jud Site, Mirabel W. Nkanor

Honors Theses

This thesis is part of the senior design final project of the Civil Engineering Department at the University of Mississippi. Geotechnical and foundation analyses were done on a proposed construction project for a multi-family home in Orlando, Florida. This evaluation done in this thesis follows the pre-existing geotechnical report on the side, USDA soil reports, ASCE Code 32-01 (Design of Foundations), and ASCE-7 Section 12.31.1 (Foundations and Superstructure-to-Foundation Connections).

A structural system was selected from the proposed location, on the corner of South Conway and Judge Road, and an evaluation of the Bearing Load capacity was completed to determine the …

Floating Offshore Wind Turbine Project, Courtney Huitt, Cormack Williams

Civil and Environmental Engineering

Offshore wind is a developing industry in the Central Coast with the advent of the future offshore wind project planned off the north coast of San Luis Obispo County. This senior design project aligns with the recently leased wind energy project as a detailed study on the structural design, geotechnical design, and construction of a single 14 MW floating offshore wind turbine (FOWT) located 40 km NW of Morro Bay (NOAA buoy 46028). A preliminary design of a spar FOWT is presented in this project as a solution to the rapidly increasing water depth off the coast of Morro Bay, …

Investigation Of Micp Based 3d Printed Soils, Kathleen Weston

Civil Engineering Undergraduate Honors Theses

The advent of additive manufacturing, often called 3D printing, offers potential for new and more sustainable soil improvement techniques. Previous research at the University of Arkansas has examined Microbially Induced Calcite Precipitation (MICP) as a possible binder option that is a more sustainable alternative to Portland cement and can be used in remote areas where Portland cement may not be available. The objective of this research is to develop an increased understanding of the potential of utilizing MICP as a spray binding technique for applications in 3D printed soils. The specific goals of this research include: examining the effectiveness of …

Energy Dissipation In A Sand Damper Under Cyclic Loading, Ehab Sabi

Civil and Environmental Engineering Theses and Dissertations

Various seismic and wind engineering designs and retrofit strategies have been in development to meet structures' proper and safe operation during earthquake and wind excitation. One such method is the addition of fluid and particle dampers, such as sand dampers, in an effort to reduce excessive and dangerous displacements of structures. The present study implements the discrete element method (DEM) to assess the performance of a pressurized sand damper (PSD) and characterize the dissipated energy under cyclic loading. The idea of a PSD is to exploit the increase in shearing resistance of sand under external pressure and the associated ability …

Modelling Monthly Rainfall Of Calabar, Nigeria Using Box-Jenkins (Arima) Method, Francis Ogbozige

Tanzania Journal of Engineering and Technology (TJET)

Rainfall has both positive and negative effects on human activities hence, correct prediction of the period of occurrence is very essential. However, the traditional method of predicting months of heavy rainfall is gradually fading out as irregular rainfall pattern is been experienced in most regions of the world. The rainfall pattern in Calabar city in Southern Nigeria has been reported in past literatures of being irregular. Hence, this research applied the Auto-Regressive Integrated Moving Average (ARIMA) also known as Box-Jenkins method to model the rainfall pattern of Calabar. This was achieved by subjecting 50years monthly rainfall (1971 – 2020) to …

Shallow-Water Wind Turbine Foundation, Andrew Walker, Nico Nani, James Cusanelli, Zachary Dunkelberger

Mechanical Engineering

Over the 2021-2022 academic year, we, the Shallow Water Wind Turbine Foundation senior project team, designed, manufactured, and tested a fixed bottom, sand mounted turbine foundation for the Cal Poly Wind Power Club’s Collegiate Wind Competition turbine. The foundation was restricted to certain material, installation, and geometric constraints outlined in this report, and needed to support the turbine under operating conditions including 22 m/s wind speeds. The design was analyzed using primarily a bearing capacity geotechnical analysis to determine final geometry and weight. The foundation was then manufactured using welded, custom carbon steel parts.

The foundation was inspected for geometric …

A Review Of Current Construction Guidelines To Inform The Design Of Rammed Earth Houses In Seismically Active Zones, David Thompson, Charles Augarde, Juan Pablo Osorio

Articles

Sustainability in the materials we use for construction is a prime concern, focusing on reducing the embodied energy and carbon footprints of the materials used. The cement used in concrete products is responsible for a significant proportion of Man's CO2 emissions and its production requires substantial energy input, as do fired clay products. For this reason, products formed from unfired earthen materials are of increasing interest and the current challenges include devising means of robust design for strength and to address durability concerns. One form of earthen construction that employs an in-situ method is rammed earth, and it is a …

The Living Breakwaters Pdr Efforts: Conceptual Scheduling, Calvin O. Walters Jr.

Publications and Research

On October 29, 2012, Superstorm Sandy caused nearly $19 billion in damages in New York City including 69,000 residential units across the five boroughs. This disaster precipitated a post-disaster-rebuilding (PDR) project including roughly $4.2 billion in a Community Development Block Grant allocated towards PDR projects. A portion of the grant was used to construct a living breakwater in Tottenville, Staten Island, consisting of a resiliency approach to risk reduction through erosion prevention, wave energy attenuation, and enhancement of ecosystems and social resiliency to improve resistance to storms for the community of Tottenville. The ridges of each breakwater are designed with …

Cyclic Behavior Of Laterally Skewed Special Moment Frame Connections: Experimental Testing And System-Level Analyses, Mohammad Hossein Kashefizadeh

Graduate Theses and Dissertations

Special moment frames (SMFs) are frequently used in high seismic areas for architecturally constrained designs. SMFs provide lateral system stiffness without the use of braces that often obstruct views and architectural features. Current American Institute of Steel Construction (ASIC) provisions (AISC 341-16) provide prequalified SMF connection details; however, all prequalified details only consider orthogonal connections between the beam and column. This dissertation investigates the effect of adding skew within SMF beam-to-column connections. The study presented herein involves system-level dynamic time-history analyses of skewed SMF connections, the analytical component-level investigation into the effect of the concrete slab on behavior of the …

Resilient Modulus Of Siliciclastic Unbound Granular Materials Under Repeated Wheel Loading, Siya Rimoyi

Tanzania Journal of Engineering and Technology (TJET)

The Resilient Modulus (Mr) is a fundamental material property input in modern Mechanistic-Empirical (M-E) pavements structural design. Empirical pavement design methods have been in use over a long period during which large databases of four- days-soaked California Bearing Ratio (CBR) values at or near the Maximum Dry Density have been generated in the strength assessments for Unbound Granular Materials (UGMs). In the adoption of the M-E design approach researchers have so far attempted with various degrees of success to develop models to derive resilient modulus from the conventional CBR-based databases. This study provides an extensive laboratory experimental study to investigate …

Analysis Of Shear Failure In Ultra-High Performance Concrete Beams, Kevin Conway

Electronic Theses and Dissertations, 2020-2023

Ultra-high performance concrete (UHPC) is an emerging cementitious material type currently undergoing research in different structural applications. This material is characterized by a compressive strength of 150 MPa (22 ksi), according to the Association Francaise de Genie Civil and the Federal Highway Administration, high tension strength, and high durability. Additionally, UHPC consists of secondary reinforcement in the form of steel or polymeric fibers, which enable UHPC to exhibit tension hardening behavior and tension ductility previously ignored in conventional concrete mixes. Previous research has focused on applications in the transportation and bridge design industries; however, applications in buildings and other heavy …

North 14th Street Corridor Improvements Project, Ashley Nguyen, Samantha Corey, Maricela Paramo Reyes, Pooja Rajeev

Honors Program: Senior Projects (Public)

The following project report was a study of the North 14^th Street corridor ranging from Adams Street to Virginia Street conducted by University of Nebraska-Lincoln students for a senior design capstone project. Main focuses of the project were the intersection of Adams and 14^th Street and the 14^th Street bridges over Cornhusker Highway and Oak Creek. Study of this area included work in transportation, traffic, structural, geotechnical, water resources, and environmental engineering. However, this report done by students should not take the place of work done by licensed professional engineers.

This project was done in collaboration with …

Comparative Analysis Of Bridge Abutment Types, David Fell

Williams Honors College, Honors Research Projects

This project was developed to serve as a brief overview of design practices and considerations in the selection of highway bridge abutment types. This involved a review of literature in the form of reviewing national design guides and department of transportation (DOT) requirements from both US DOTs and international DOTs. The abutment types covered in this research included conventional reinforced concrete abutments with bearings, integral abutments, and semi-integral abutments. This research focused solely on highway bridge abutments, particularly on Ohio Department of Transportation design requirements due to their extensive use of semi-integral abutments. Superstructure elements and geometric requirements are primary …

Additive Manufacturing Of Soil Using Bio-Cementation, Christina Childress

Graduate Theses and Dissertations

Microbially Induced Calcite Precipitation (MICP) is an emerging soil treatment technique that is proven to increase strength, decrease erosion, reduce liquefaction risk, enhance slope stability, decrease compressibility, decrease swelling potential, and overall create a more competent soil. The benefits and applications of MICP are broad, and this research seeks to broaden them further by developing a single-phase additive manufacturing application with no treatment time delay. This is done by analyzing layering behaviors of five USCS soil classifications (100 % Ottawa sand, sand clay mixtures, and 100% lean clay) which provides insight into process variables such as the solution volume and …

Cyber Physical Systems For Non-Contact Infrastructure Monitoring, Roya Nasimi

Civil Engineering ETDs

In recent decades, the decay of infrastructure has become a relevant challenge of both developed and under developing countries. Prioritization of maintenance and repairs of transportation infrastructure is a new worldwide priority since it is important to quantify the rate of decay of assets to increase both safety and cost-efficient operations. Infrastructure owners need frequent inspections on their assets to predict and to avoid unsafe conditions prone to cause disasters. Frequent infrastructure inspections call for cost-effective methods. Traditional measurement methods require human access to the infrastructure, are subjective, expensive, and unsafe. Therefore, infrastructure managers are interested in exploring new non-contact …

Applications Of Masw And Mhvsr Techniques For Infrastructure Evaluation With A Focus On The Effects Of Different Transformation Techniques And Near-Field Effects On Derived Dispersion Data, Salman Rahimi

Graduate Theses and Dissertations

This dissertation is aimed at understanding two aspects of active surface wave methods to improve the accuracy and reliability of this method. These include (1) the performance of four common wavefield transformation methods for the multichannel analysis of surface wave (MASW) data processing and (2) near-field effects. Toward this end, extensive field measurements were conducted considering different factors affecting these two topics. The MASW and microtremor horizontal to vertical spectral ratio (MHVSR) were then employed to examine their efficiency for infrastructure health monitoring.

Regarding the performance of the four common transformation techniques, it was observed that for sites with a …

Dynamic Soil-Structure Interaction Analysis: Detecting The Reliability Of Modelling The Piles As A Plate Element For A Multistory Building Resting On Deep Foundation, Zeinab Hussein Zein Z.H.Zein, Lina Jaber L. Jaber, Yehya Temsah Y. Temsah

BAU Journal - Science and Technology

The assessment of seismic responses of buildings in dynamic-soil-pile-structure interaction problems has been one of the main interests among researchers in recent decades. Simulating such problems is usually done by two-dimensional models to overcome the difficulties encountered in 3D models. Commonly, piles were represented by plate elements of infinite length, disregarding the soil flowing between piles. Recently, Plaxis – a finite element software- implemented a new feature known as “the embedded pile row” that allows the definition of piles' out of plane spacing in a 2D model. Many researchers proved its validity in accurately simulating the real 3D pile’s behavior. …

Analysis Of Shear-Strength In Weathered Shale Strata Along A Highway Slope Failure Site In Northwest Arkansas, Olivia Overton

Civil Engineering Undergraduate Honors Theses

Slope failures cost millions of dollars per year to repair and can be deadly. Accurate modeling of slope conditions, including soil parameters, water table locations, and depth to bedrock, are essential to determining the overall stability of a slope. This project is a continuation of the work completed in 2019 by a former University of Arkansas researcher, Vanessa LeBow. LeBow RocScience used Slide2 modeling software to model two highway embankment slopes in Northwest Arkansas that experienced slope movement to determine whether increased use of geophysical data could increase the accuracy of slope stability models. A parametric study of shear strengths …

Workshop Outcomes Report: 1st International Workshop On Seismic Resilience Of Arctic Infrastructure And Social Systems, Majid Ghayoomi, Katharine Duderstadt, Alexander Kholodov, Alexander Shiklomanov, Matthew Turner, Elham Ajorlou

Faculty Publications

No abstract provided.

Laboratory Testing And Mechanistic Analysis Of Treated Subgrade Soils, Hari Kumar Reddy Yarrapureddi

Civil Engineering Theses

Calcium-based stabilizing agents such as cement and lime have been extensively used to improve the engineering properties of base and subgrade layers of pavement systems. Recently, polymers and chemical stabilizers have become popular due to cost efficiency, ease of application, and fast curing times. In this study, California Bearing Ratio (CBR) values of polymer and chemical treated soils were compared with the CBR values of soils treated with conventional stabilizers. Parametric sensitivity analyses was carried out on key parameters including the type of subgrade soil, stabilizing agent, stabilizing agent treatment levels, and moisture conditioning. Additionally, numerical analyses was performed to …