Open Access. Powered by Scholars. Published by Universities.®

Geotechnical Engineering Commons

Open Access. Powered by Scholars. Published by Universities.®

Articles 1 - 10 of 10

Full-Text Articles in Geotechnical Engineering

Development Of Deep Shear Wave Velocity Profiles And An Approach To Generate Site Signature Consistent Pseudo Shear Wave Velocity Profiles In The Mississippi Embayment, Ashraf Kamal Himel Aug 2022

Development Of Deep Shear Wave Velocity Profiles And An Approach To Generate Site Signature Consistent Pseudo Shear Wave Velocity Profiles In The Mississippi Embayment, Ashraf Kamal Himel

Graduate Theses and Dissertations

This dissertation details the development of a surface wave method (SWM) technique to generate deep shear wave velocity profiles (VS profiles), applying this technique at 24 sites across the Mississippi embayment and developing an approach to generate pseudo site signature consistent VS profiles from velocity functions and fundamental frequency. In the presented SWM technique, active and passive source surface wave measurements are inverted along with fundamental frequency to develop a site signature consistent VS profile. Multiple transformation methods, including MSPAC, HRFK and FK are used to resolve experimental dispersion data from surface wave measurements. SWM VS profile at the Central …


Incorporating Geophysical Data In Slope Stability Modeling For Two Slopes In Arkansas, Vanessa Lebow Dec 2019

Incorporating Geophysical Data In Slope Stability Modeling For Two Slopes In Arkansas, Vanessa Lebow

Graduate Theses and Dissertations

Slope failures in the United States alone cause millions of dollars in damage to infrastructure, threaten national monuments, create environmental hazards, and take an average of 25-50 lives a year. With the inevitable construction that occurs on slopes, it is imperative that the slopes be properly designed which requires a thorough understanding of slope grade, subsurface soil conditions, soil strength parameters, water table locations, and depth to bedrock across the entire site. The preferred method of data collection would be to use borings and other in-situ methods; however, sometimes due to cost constraints or site accessibility only a very limited …


Utilizing The Hvsr Second Peak For Surface Wave Inversions In The Mississippi Embayment, Ashraf Kamal Himel Dec 2018

Utilizing The Hvsr Second Peak For Surface Wave Inversions In The Mississippi Embayment, Ashraf Kamal Himel

Graduate Theses and Dissertations

Ambient noise data from 24 sites within the Mississippi Embayment were analyzed to estimate the fundamental frequency using the horizontal to vertical spectral ratio (HVSR) method. The fundamental frequency ranged from 0.17 to 3.43 Hz for the tested sites. At seventeen of the sites, a second higher frequency HVSR peak, which ranged from 0.617 Hz to 2.154 Hz, was observed in addition to the fundamental HVSR peak. The second peak frequency in the HVSR curve has been attributed by previous researchers as either an odd harmonic of the fundamental peak or a shallow impedance contrast from the Memphis sand layer …


Sh-Mode Seismic-Reflection Imaging Of Earthfill Dams, Edward W. Woolery Oct 2018

Sh-Mode Seismic-Reflection Imaging Of Earthfill Dams, Edward W. Woolery

Earth and Environmental Sciences Faculty Publications

Assessing subsurface characteristics and imaging geologic features (e.g., faults, cavities, low-velocity layers, etc.) are typical problems in near-surface geophysics. These questions often have adverse geotechnical engineering implications, and can be especially acute when associated with high-hazard structures such as large earthen flood-control dams. Dam-related issues are becoming more frequent in the United States, because a large part of this major infrastructure was designed and constructed in the early- to mid-twentieth century; these dams are thus passing into the latter stages of their design life, where minute flaws that were overlooked or thought to be insignificant in design/construction are now …


Laboratory Resistivity Measurements For Soil Characterization, Behdad Mofarraj Kouchaki Aug 2017

Laboratory Resistivity Measurements For Soil Characterization, Behdad Mofarraj Kouchaki

Graduate Theses and Dissertations

Field based electrical resistivity measurements, such as electrical resistivity tomography (ERT) and capacitively coupled resistivity (CCR), are geophysical methods that offer a non-destructive and rapid means to collect continuous data. As such, ERT and CCR are becoming increasingly popular tools for geotechnical engineers; however, it is challenging to derive geotechnical information such as soil type, density, and water content from the data. A laboratory geophysical investigation was carried out to gain a better understanding of the parameters that affect the electrical resistivity of soils and devise a relationship between resistivity and soil type or classification. In this study, a soil …


Development Of Deep Site Specific And Reference Shear Wave Velocity Profiles In The Canterbury Plains, New Zealand, Michael Ryan Deschenes Aug 2017

Development Of Deep Site Specific And Reference Shear Wave Velocity Profiles In The Canterbury Plains, New Zealand, Michael Ryan Deschenes

Graduate Theses and Dissertations

Deep (typically >1000 m) shear wave velocity profiles were developed across the Canterbury basin at nine strong motion stations using a combination of active and passive surface wave methods and horizontal to vertical spectral ratio measurements. A multi-mode, multi-method joint inversion process, which included Rayleigh and Love wave dispersion and horizontal to vertical spectral ratio data, was used to estimate the shear wave velocity profiles at each site. A-priori geologic information was utilized in defining preliminary constraints on the complex geologic layering of the Canterbury basin. At sites where interbedded layers were present, velocity reversals were considered in the inversion. …


Geophysical Assessment Of Kinion Lake Dam, Tim Allen Moody Aug 2017

Geophysical Assessment Of Kinion Lake Dam, Tim Allen Moody

Graduate Theses and Dissertations

Geophysical methods including Capacitively-Coupled Resistivity (CCR), Electrical Resistivity Tomography/Imaging (ERT/ERI), Multichannel Analysis of Surface Waves (MASW) with Love and Rayleigh waves and a Full-Waveform Inversion (FWI) were performed on Kinion Lake Dam, an earth-filled embankment dam that has historically experienced significant seepage and internal erosion issues. Surveys were completed along the crest and downstream toe of the dam. Results from the surveys indicate that each method is capable of resolving the bedrock depth within 1-2 m of locations shown on previous drilling logs, though some discrepancies between the methods exist. A weathered bedrock layer is believed to have led to …


Fault Mapping With The Refraction Microtremor And Seismic Refraction Methods Along The Los Osos Fault Zone, Justin Riley Martos Nov 2012

Fault Mapping With The Refraction Microtremor And Seismic Refraction Methods Along The Los Osos Fault Zone, Justin Riley Martos

Master's Theses

The presence of active fault traces in proximity to any new infrastructure project is a major concern for the design process. The relative displacements that can be experienced in surface fault rupture during a seismic event must be either entirely avoided or mitigated in some way. Blind faults present a significant challenge to engineers attempting to identify these hazards. Current standards of practice employed to locate these features are time consuming and costly. This work investigates the geophysical methods of refraction microtremor (ReMi) and seismic refraction with regard to their applicability in this task. By imaging a distinct lateral variation …


2d And 3d Imaging Of The Metamorphic Carbonates At Omalos Plateau/Polje, Crete, Greece By Employing Independent And Joint Inversion On Resistivity And Seismic Data, Hamdan Ali Hamdan Dr, Nikos Economou, Giorgos Kritikakis, Nikos Andronikidis, Emmanuil Manoutsoglou, Antonis Vafidis, Pangratis Pangratis, Georgina Apostolidou Jan 2012

2d And 3d Imaging Of The Metamorphic Carbonates At Omalos Plateau/Polje, Crete, Greece By Employing Independent And Joint Inversion On Resistivity And Seismic Data, Hamdan Ali Hamdan Dr, Nikos Economou, Giorgos Kritikakis, Nikos Andronikidis, Emmanuil Manoutsoglou, Antonis Vafidis, Pangratis Pangratis, Georgina Apostolidou

International Journal of Speleology

A geophysical survey carried out at Omalos plateau in Chania, Western Crete, Greece employed seismic as well as electrical tomography methods in order to image karstic structures and the metamorphic carbonates (Tripali unit and Plattenkalk group) which are covered by post-Mesozoic deposits (terra rossa, clays, sands and gravels). The geoelectrical sections image the metamorphic carbonates which exhibit a highly irregular relief. At the central part of the plateau the thickness of post-Mesozoic deposits (terra rossa, clays, sands and gravels) ranges from 40-130 m. A 3D resistivity image was generated by inverting resistivity data collected on a grid to the south …


Detecting Anomalous Inclusions In Soil Profiles: Encouraging The Use Of Geophysics To Solve Engineering Problems, Barbara Luke, Carlos Calderon-Macias Jan 2005

Detecting Anomalous Inclusions In Soil Profiles: Encouraging The Use Of Geophysics To Solve Engineering Problems, Barbara Luke, Carlos Calderon-Macias

Civil and Environmental Engineering and Construction Faculty Research

Geotechnical site investigations often do not take full advantage of geophysical methods. As examples, when delineating cemented strata and when detecting shallow cavities, investigations can be enhanced greatly for low additional cost by incorporating seismic surface-based measurements.