Geotechnical Engineering Commons^™

A Progress Insight Of The Formation Of Hydrogen Rich Syngas From Coal Gasification, Tawanda Matamba, Stefan Iglauer, Alireza Keshavarz

Research outputs 2022 to 2026

This review paper aims to explore the research progress in the formation of hydrogen rich gas from different innovative coal gasification parameters. Promotion effects of parameters such as pressure, temperature, catalyst, coal type, reactor setup, and gasification agents (H2O, O2, supercritical water) were extensively analysed. The formation of hydrogen gas through coal gasification was sub-divided into H2 production from fixed bed gasification system, fluidized bed system, and entrained flow system. The advantages of coal and biomass co-gasification towards clean energy formation was also reviewed. Co-gasification and elevated temperatures, pressures, and steam-carbon ratios were reported to positively influence the yields of …

Assessing Morphological Changes Of The Msimbazi River Using Satellite Images, Fides J. Izdori

Tanzania Journal of Engineering and Technology (TJET)

This study assessed historical morphology changes of the Msimbazi River in Dar es Salaam City, Tanzania, following heavy rainfall events using historical Google earth images. The erosion and sedimentation processes that cause morphological changes of a river are also associated with flooding within the river catchments. In this study, the bank-line movement, erosion and sedimentation areas and changes in river section width were analyzed under three-time periods: 2005- 2012, 2012- 2018, and 2018- 2020. Data shows that, the timing for floods coincides with the historical records for heavy rains. It was found that, area in the upper reaches of the …

Energy Dissipation In A Sand Damper Under Cyclic Loading, Ehab Sabi

Civil and Environmental Engineering Theses and Dissertations

Various seismic and wind engineering designs and retrofit strategies have been in development to meet structures' proper and safe operation during earthquake and wind excitation. One such method is the addition of fluid and particle dampers, such as sand dampers, in an effort to reduce excessive and dangerous displacements of structures. The present study implements the discrete element method (DEM) to assess the performance of a pressurized sand damper (PSD) and characterize the dissipated energy under cyclic loading. The idea of a PSD is to exploit the increase in shearing resistance of sand under external pressure and the associated ability …

Investigation Of Geopolymer Based Soil Stabilization Methods For Expedient Airfield Pavement Surfaces, Brett Albertson

All Theses

The United States Air Force (USAF) has the unique capability of being able to interdict superior airpower anywhere, at any time. However, superior airpower is only as effective as the amount of time an aircraft can spend in a particular area. The closer an aircraft can get to the mission need, the more time that can be spent in the air, or the less time that must be spent moving in and out of the operational area. Through the use of skilled and experienced men and women, the USAF is able to apply expedient and unsurfaced airfield paving techniques that …

The Living Breakwaters Pdr Efforts Econcrete Resource Analysis, Guianina Ferrari, Shervon Stephens, Calvin O. Walters Jr.

Publications and Research

On October 29, 2012, Superstorm Sandy impacted 443,000 people and caused nearly $19 billion (about $58 per person in the US) worth of damage within New York City. As part of the New York City infrastructure reparation plan, the Living Breakwaters project in Tottenville addressed coastal resilience, allocating $100M of public funds to a series of artificial breakwaters by the southwest coast of Staten Island. Each breakwater is constructed and designed to mitigate water flow in storm events. ECOncrete, a primary element of the breakwater, is a specialty cast cementitious product that is marine organism-friendly that encourages biocalcification and photosynthesis. …

Erosion And Resuspension Of Cohesive Sediments In Coastal Louisiana, Laith Qasem Shamaileh

LSU New Orleans Theses and Dissertations

The research presented in this study is motivated by the need to improve the predictions of cohesive sediment erosion and subsequent transport. In addition, the knowledge of the geotechnical engineering soil properties related to the erosion of sediments in coastal Louisiana has broad implications as these properties are used in transport models guiding the current restoration efforts. The erosion measuring device used in the study is the Cheng-Han Tasi and Wilbert Lick Shaker. Previous studies have been conducted before using the Shaker, but challenges with the calibration of the shear stress hampered the resuspension results produced by the Shaker. Therefore, …

The Influence Of Acidizing On Propped Fractures For Productivity Enhancement: Eagle Ford Laboratory Study, Mohsen Farrokhrouz, Abbas Taheri, Stefan Iglauer, Alireza Keshavarz

Research outputs 2022 to 2026

Hydraulic fracturing of tight formations and placing proppants within induced fractures are commonly performed in unconventional shale reservoirs all over the world, especially in North America. However, the overall recovery of these oil and gas resources is very low and hence, production enhancement is inevitable. This study investigated the acidizing of propped fractures as a recovery enhancement method in Eagle Ford shale samples. Experiments were designed using sample slabs having proppants between them. Differing parameters were examined to optimize the fracture conductivity through acidizing. For a range of confining pressures, the fracture conductivity was maximized by minimizing the proppant embedment. …

Development Of An Excel Model To Evaluate The Stability Of Slopes, Bradley Davis

All Graduate Plan B and other Reports, Spring 1920 to Spring 2023

This objective of this study is to determine a method or tool for taking given slope stability parameters and quickly and effectively determining the factor of safety against sliding of fully softened slopes. This study evaluates the effects of soil and geometric parameters of common slopes, and models these properties in a hypothetical model. The methodology is based on a parametric analysis using the Spencer’s Method of Slices limit equilibrium analysis used in the computer program Slide2. A parametric analysis is performed to determine which soil and/or geometric properties have a high influence on slope stability. The parametric analysis is …

Continuous Moisture Measurement During Pavement Foundation Construction: Laboratory Measurements, Isaac Esteban Zuniga

Open Access Theses & Dissertations

Moisture content directly affects all properties of subgrade materials. A rapid, continuous, and accurate technique to determine moisture content during subgrade construction is the next step needed to improve the mechanistic-based quality of pavement foundations. In this study, six geomaterials were compacted to standard/modified proctor specifications and subjected to laboratory measurements to study the variations in their electromagnetic and electric properties with moisture content. The relationships between the seismic modulus, unconfined compressive strength, lightweight deflectometer, and moisture content for the same geomaterials were also established. Large-scale replicate specimens were also compacted and subjected to numerous measurements. The dielectric constant measured …

Numerical Investigation Of Heat Generation And Accumulation Contributing To Elevated Temperature In Msw Landfills, Alborz Fathinezhad

LSU Doctoral Dissertations

Landfills are complex geostructures which contains organic and inorganic municipal, and in some cases industrial, wastes and are expected to remain operational for long times. Due to the complex nature of physical, chemical, biological, and thermal reactions that carry on within the depths of a landfill, unexpected incidents such as elevated temperatures could become inevitable. While uncommon to happen, elevated temperatures cause health and environmental issues such as odors, rapid settlements, slope instabilities. In addition, elevated temperatures can negatively impact engineered components in composite bottom liners, cover systems, leachate collection, and gas extraction and recovery systems.

Air intrusion into municipal …

Geology-Based Shear-Wave Velocity Model Of Reference Site Conditions In South Carolina For Seismic Site Response Analysis, Camilius Amevorku

All Dissertations

Assessing earthquake hazard in the State of South Carolina is important because it is one of the most seismically active regions of the eastern United States and has experienced earthquakes of damaging levels in the historical past. Examples of these damaging seismic events are the 1886 Charleston earthquake (M 6.7 to 7.5) and the 1913 Union County earthquake (M 4.5 to 5.5).

Small-strain shear-wave velocity (V_S) is an important parameter in performing site response analysis. The deep nature of the top of reference firm rock (i.e., V_S ≥ 760 m/s or B-C boundary) due to …

Randomly Generating The 3d Mesostructure Of Soil Rock Mixtures Based On The Full In Situ Digital Image Processed Information, Zhengsheng Li, Haiyang Yi, Cheng Zhu, Zhuang Zhuo, Guoshuan Liu

Henry M. Rowan College of Engineering Departmental Research

Understanding the occurrence and evolution of geological disasters, such as landslides and debris flows, is facilitated by research on the performance of soil rock mixes (SRM). Recently, more and more researchers have been interested in studying the mesostructure reconstruction process of SRM. The present mesostructure generation approaches, however, have several weaknesses. One of the weaknesses is that they do not consider the impact of particle shape and therefore cannot ensure similarity to the in situ SRMs. In this study, a new mesostructure generation method that randomly generates SRMs based on the full in situ digital image processing (DIP) information is …

Cascadia Subduction Zone Earthquake Vertical Ground Acceleration Investigation And Potential Impact On Bridges In The Pacific Northwest, Rachel Caroline Bassil

Civil and Environmental Engineering Master's Project Reports

The effects of vertical ground accelerations during subduction zone earthquakes currently are not sufficiently understood. There are numerous case studies and evidence that effects of vertical ground accelerations can significantly impact the performance of bridges during a seismic event, but most previous research has been focused on shallow crustal earthquakes. Current bridge design codes provide little guidance for accounting for vertical ground accelerations in seismic design, in part because additional information is needed about the characteristics of vertical ground motions during Cascadia Subduction Zone (CSZ) earthquakes in the Pacific Northwest.

For this study, recorded seismic data from recent subduction zone …

Minimizing Surface Run-Off, Improving Underground Water Recharging, And On-Site Rain Harvesting In The Kathmandu Valley, Ambika P. Adhikari, Keshav Bhattarai

Himalayan Research Papers Archive

Nepal's political institutions and administrative units were thoroughly restructured in 2015 with the promulgation of the new Constitution. Several rural areas were combined to meet the definition of urban threshold criteria to classify rural areas into urban categories. Accordingly, over 3,900 local political and administrative units were amalgamated into 753 units, of which, 293 units are classified as urban. Within these newly defined urban areas, many natural environments have been converted into impervious surfaces such as paved roads, sidewalks, and building roofs. These impervious surfaces have drastically increased the amount of surface run-offs-often termed as "urban floods"--under increasing precipitation caused …

Correlations Between Dynamic Probe Blow Count And Undrained Shear Strength For Peat At A Well-Characterised Raised Bog In Ireland, David Mchugh, Ciaran Reilly, Juan Pablo Osorio

Articles

Peat deposits are generally heterogeneous, with large variations over small areas. Peat has an extremely high water content, high compressibility and low shear strength. This presents a major issue in studying the geomechanical behavior of peat. For this study, field and laboratory tests were conducted to establish the undrained shear strength (s_u) of peat at a cutover industrial peatland in Ireland which had been extensively characterized in the past. The new field work included TRL-type Dynamic Cone Penetrometer, Mackintosh probe and field vane shear tests. A correlation was developed between the Mackintosh probe “M-value” blow count and the …

Development Of Deep Shear Wave Velocity Profiles And An Approach To Generate Site Signature Consistent Pseudo Shear Wave Velocity Profiles In The Mississippi Embayment, Ashraf Kamal Himel

Graduate Theses and Dissertations

This dissertation details the development of a surface wave method (SWM) technique to generate deep shear wave velocity profiles (VS profiles), applying this technique at 24 sites across the Mississippi embayment and developing an approach to generate pseudo site signature consistent VS profiles from velocity functions and fundamental frequency. In the presented SWM technique, active and passive source surface wave measurements are inverted along with fundamental frequency to develop a site signature consistent VS profile. Multiple transformation methods, including MSPAC, HRFK and FK are used to resolve experimental dispersion data from surface wave measurements. SWM VS profile at the Central …

Temporal Lidar Scanning In Quantifying Cumulative Rockfall Volume And Hazard Assessment: A Case Study At Southwestern Saudi Arabia, Abdullah A. Alotaibi, Norbert H. Maerz, Kenneth J. Boyko, Ahmed M. Youssef, Biswajeet Pradhan

Geosciences and Geological and Petroleum Engineering Faculty Research & Creative Works

Rockfalls and unstable slopes pose a serious threat to people and property along roads/highways in the southwestern mountainous regions of Saudi Arabia. In this study, the application of terrestrial light detection and ranging (LiDAR) technology was applied aiming to propose a strategy to analyze and accurately depict the detection of rockfall changes, calculation of rockfall volume, and evaluate rockfall hazards along the Habs Road, Jazan Region, Saudi Arabia. A series of temporal LiDAR scans were acquired at three selected sites. Our results show that these three sites have different degrees of hazard due to their geological differences. The mean volume …

Compound Flooding In Convergent Estuaries: Insights From An Analytical Model, Ramin Familkhalili, Stefan Talke, David A. Jay

Civil & Environmental Engineering Faculty Publications

We investigate here the effects of geometric properties (channel depth and cross-sectional convergence length), storm surge characteristics, friction, and river flow on the spatial and temporal variability of compound flooding along an idealized, meso-tidal coastal-plain estuary. An analytical model is developed that includes exponentially convergent geometry, tidal forcing, constant river flow, and a representation of storm surge as a combination of two sinusoidal waves. Nonlinear bed friction is treated using Chebyshev polynomials and trigonometric functions, and a multi-segment approach is used to increase accuracy. Model results show that river discharge increases the damping of surge amplitudes in an estuary, while …

Permeability And Porosity Of Loose Granular Salt, Evan J. Babcock

Civil Engineering ETDs

In this study, permeability and porosity measurements are made and reported for loose granular salt from the Waste Isolation Pilot Plant (WIPP). Measurements are made on a particularly wide range of particle sizes of this salt in a permeameter constructed large enough to fit and represent mixtures containing salt particles up to 25.4 cm in size. Salt samples with different particle size distributions are constructed and tested at varying levels of consolidation due to induced vibrations. Permeability measurements are made at a varying range of porosities for a given sample. Measurements are also compared with a predictive model for permeability …

Modelling Monthly Rainfall Of Calabar, Nigeria Using Box-Jenkins (Arima) Method, Francis Ogbozige

Tanzania Journal of Engineering and Technology (TJET)

Rainfall has both positive and negative effects on human activities hence, correct prediction of the period of occurrence is very essential. However, the traditional method of predicting months of heavy rainfall is gradually fading out as irregular rainfall pattern is been experienced in most regions of the world. The rainfall pattern in Calabar city in Southern Nigeria has been reported in past literatures of being irregular. Hence, this research applied the Auto-Regressive Integrated Moving Average (ARIMA) also known as Box-Jenkins method to model the rainfall pattern of Calabar. This was achieved by subjecting 50years monthly rainfall (1971 – 2020) to …

Feasibility Report On Water Recycling And The Housing Crisis, Tally A. Perry

City and Regional Planning

The western United States is experiencing increasing population, a housing shortage, and a drought. These challenges demand creative and unprecedented changes to development. Water recycling is slowly emerging as a viable solution for developers, home owners, and cities as a way to continue much-needed housing development while mitigating unnecessary water depletion. With all change, policy, feasibility, and awareness can be the largest influencers. Drought-ridden western-American states require additional and revised regulatory requirements to promote recycled water in new development. Currently, water reuse is largely used for agricultural and industrial purposes. To motivate and encourage housing development, water recycling needs to …

Evaluation Of An Equivalent Mean Grain Size Diameter To Rationally Predict The Erodibility Of Fine Riverbed Soils In Nebraska, Basil Abualshar

Department of Civil and Environmental Engineering: Dissertations, Theses, and Student Research

The erosion of riverbed soils under the bridges is one of the major reasons that cause bridge closure or failure leading to a significant effect on the local economy. One of the commonly used methods to predict the erosion rate of soils is the excess shear stress method, which is based on two parameters describing the erodibility behavior; the erodibility coefficient and the critical shear stress. On the other hand, studies showed that the mean grain size diameter D₅₀ could be correlated to the erosion resistance of soils, usually for cohesionless soils but not for cohesive soils. It is …

Effect Of Biochar On Desiccation Of Marine Soils Under Constant And Cyclic Temperatures, Thellen Kumar Puspanathan, Vihan Shenal Jayawardane, Suvash Chandra Paul, Kong Sih Ying, Sanjay Kumar Shukla, Vivi Anggraini

Research outputs 2022 to 2026

Biochar has recently been gaining increasing attention as a stable and sustainable soil amendment material. However, the effect of biochar amendment on the desiccation behaviour of coastal soils has not yet been examined. Consequently, the present study primarily investigated the effect of exposing biochar-amended marine soil (BAS) to constant and cyclic temperatures on its swell–shrink, evaporation and desiccation cracking characteristics. Biochar contents of 1%, 2%, 4% and particle size ranges of PS-1 (600 μm < D ≤ 2000 μm), PS-2 (300 μm < D ≤ 600 μm), PS-3 (D ≤ 75 μm) (D: biochar particle diameter) were employed. It was revealed that the absolute volumetric shrinkage of both unamended and biochar-amended specimens increased as the number of thermal cycles increased. Under continuous heat exposure, 4% (PS-3) BAS in compacted state achieved the maximum reduction in volumetric shrinkage which was 42%. Moreover, under continuous heat exposure, 2% (PS-1) BAS in slurry state achieved the highest reduction in desiccation cracking, which was 73%. The present study highlights the importance of identifying the most effective combination of biochar content and particle size required to achieve a desired outcome, in order to gain the maximum benefit of biochar as an amendment material at the lowest possible cost.

Shallow-Water Wind Turbine Foundation, Andrew Walker, Nico Nani, James Cusanelli, Zachary Dunkelberger

Mechanical Engineering

Over the 2021-2022 academic year, we, the Shallow Water Wind Turbine Foundation senior project team, designed, manufactured, and tested a fixed bottom, sand mounted turbine foundation for the Cal Poly Wind Power Club’s Collegiate Wind Competition turbine. The foundation was restricted to certain material, installation, and geometric constraints outlined in this report, and needed to support the turbine under operating conditions including 22 m/s wind speeds. The design was analyzed using primarily a bearing capacity geotechnical analysis to determine final geometry and weight. The foundation was then manufactured using welded, custom carbon steel parts.

The foundation was inspected for geometric …

Evaluating And Incorporating Site Variability In Different Geotechnical Engineering Applications, Md Habibur Rahman

LSU Doctoral Dissertations

Site investigation and characterization of subsurface soil conditions are crucial for geotechnical engineering design and analysis. Geotechnical properties vary inherently from one point to another within the same site. This study focused on evaluating the site variability from cone penetration tests (CPT) and soil boring data, and its implementation into the Load and Resistance Factor Design (LRFD) formulation. The total Coefficient of Variation (COV_R,total) for each site was estimated from COV_R,spatial (Spatial Coefficient of Variation) and COV_R,method (Method Coefficient of Variation) which were then used to calibrate the resistance factors (ϕ_spatial, ϕ_total) …

A Review Of Current Construction Guidelines To Inform The Design Of Rammed Earth Houses In Seismically Active Zones, David Thompson, Charles Augarde, Juan Pablo Osorio

Articles

Sustainability in the materials we use for construction is a prime concern, focusing on reducing the embodied energy and carbon footprints of the materials used. The cement used in concrete products is responsible for a significant proportion of Man's CO2 emissions and its production requires substantial energy input, as do fired clay products. For this reason, products formed from unfired earthen materials are of increasing interest and the current challenges include devising means of robust design for strength and to address durability concerns. One form of earthen construction that employs an in-situ method is rammed earth, and it is a …

The Living Breakwaters Pdr Efforts: Conceptual Scheduling, Calvin O. Walters Jr.

Publications and Research

On October 29, 2012, Superstorm Sandy caused nearly $19 billion in damages in New York City including 69,000 residential units across the five boroughs. This disaster precipitated a post-disaster-rebuilding (PDR) project including roughly $4.2 billion in a Community Development Block Grant allocated towards PDR projects. A portion of the grant was used to construct a living breakwater in Tottenville, Staten Island, consisting of a resiliency approach to risk reduction through erosion prevention, wave energy attenuation, and enhancement of ecosystems and social resiliency to improve resistance to storms for the community of Tottenville. The ridges of each breakwater are designed with …

Cyclic Behavior Of Laterally Skewed Special Moment Frame Connections: Experimental Testing And System-Level Analyses, Mohammad Hossein Kashefizadeh

Graduate Theses and Dissertations

Special moment frames (SMFs) are frequently used in high seismic areas for architecturally constrained designs. SMFs provide lateral system stiffness without the use of braces that often obstruct views and architectural features. Current American Institute of Steel Construction (ASIC) provisions (AISC 341-16) provide prequalified SMF connection details; however, all prequalified details only consider orthogonal connections between the beam and column. This dissertation investigates the effect of adding skew within SMF beam-to-column connections. The study presented herein involves system-level dynamic time-history analyses of skewed SMF connections, the analytical component-level investigation into the effect of the concrete slab on behavior of the …

Rapid Non-Nuclear In Situ Density And Moisture Content Measurement Of Soil, Mateo Lopez

Graduate Theses and Dissertations

Adequate soil compaction is important for the stability and safety of structures and transportation infrastructure. Thus, methods utilized to obtain properties that control the quality of compaction in the field are essential to ensure proper construction. These properties include; total density, dry density, total unit weight and dry unit weight of the compacted soil. The most common method to measure these properties in the field is the Nuclear Density Gauge. Moisture content and density results are obtained using the Nuclear Density Gauge in one to four minutes. However, this method requires specialized training and strict storage requirements in addition to …

Comparing Actively Managed Mutual Fund Categories To Index Funds Using Linear Regression Forecasting And Portfolio Optimization, Luke Weiner

Industrial Engineering Undergraduate Honors Theses

The global investment industry offers a wide variety of investment products especially for individual investors. One such product, index funds, which are younger than actively managed mutual funds, have typically outperformed managed funds. Despite this phenomenon, investors have displayed a tendency to continue investing in actively managed funds. Although only a small percentage of actively managed funds outperform index funds, the costs of actively managed funds are significantly higher. Also, managed fund performances are most often determined by their fund category such as growth or real estate. I wanted to answer the following question for individual investors: can we …