Engineering Physics Commons^™

Effect Of Chemistry On Electrodynamics In The Martian Dynamo Region, Morgan M. Matheny

Doctoral Dissertations and Master's Theses

Electromagnetic interactions between Mars remnant crustal magnetic fields and solar and planetary ions lead to time and space variations of the ionosphere. In this work, we continue the investigations started by Riousset et al. [2013] and address the effect of chemistry on ion populations in the dynamo region, where ion dynamics are driven by collisions while electrons are still mostly magnetized. We adopt a mesoscale model to simulate dynamics of electrons and ions in the upper atmosphere (100–400 km). Our approach focuses on numerical studies using the Martian Multifluid Magnetohy drodynamic (MF-MHD) Model (M4). The dynamo is a region which …

Nonlinear Acoustic Waves Generated By Surface Disturbances And Their Effect On Lower Thermospheric Composition, Benedict Piñeyro

Doctoral Dissertations and Master's Theses

Recent nonlinear atmospheric models have provided important insight into acoustic waves generated by seismic events, which may steepen into shocks or saw-tooth trains while also dissipating strongly in the thermosphere. Although they have yielded results that agree with observations of ionospheric perturbations, dynamical models for the diffusive and stratified lower thermosphere often use single gas approximations with height-dependent physical properties (e.g. mean molecular weight, specific heats) that do not vary with time (fixed composition). This approximation is simpler and less computationally expensive than a true multi-fluid model, yet captures the important physical transition between molecular and atomic gases in the …

A Study Into Data Analysis Of Varying Types Of Langmuir Probes, William Merritt

Doctoral Dissertations and Master's Theses

Langmuir probes are ubiquitously used for in-situ measurements of plasma parameters. These probes have been placed on many different platforms, including experimental sounding rockets for measurements in mesosphere-lower-thermosphere, and also onboard satellites to obtain data sets over an extended period of time in the ionosphere. To accommodate such different situations, many different variations of the Langmuir probe design have been made. This thesis covers two such implementations, as well as the data analysis and issues that can arise with such instruments. The first of these implementations is a set of sweeping Langmuir probes on the Floating Potential Measurement Unit (FPMU) …

High Dynamic Range Optical Devices And Applications., Elijah Robert Jensen

Electronic Theses and Dissertations

Much of what we know about fundamental physical law and the universe derives from observations and measurements using optical methods. The passive use of the electromagnetic spectrum can be the best way of studying physical phenomenon in general with minimal disturbance of the system in the process. While for many applications ambient visible light is sufficient, light outside of the visible range may convey more information. The signals of interest are also often a small fraction of the background, and their changes occur on time scales so quickly that they are visually imperceptible. This thesis reports techniques and technologies developed …

Fuel Flow Reduction Impact Analysis Of Drag Reducing Film Applied To Aircraft Wings, Damon Resnick, Chris Donlan, Nimish Sakalle, Cody Pinkerman

SMU Data Science Review

In this paper, we present an analysis of flight data in order to determine whether the application of the Edge Aerodynamix Conformal Vortex Generator (CVG), applied to the wings of aircraft, reduces fuel flow during cruising conditions of flight. The CVG is a special treatment and film applied to the wings of an aircraft to protect the wings and reduce the non-laminar flow of air around the wings during flight. It is thought that by reducing the non-laminar flow or vortices around and directly behind the wings that an aircraft will move more smoothly through the air and provide a …

Arrhenius Rate Chemistry-Informed Inter-Phase Source Terms (Arciist), Matthew J. Schwaab, Robert B. Greendyke, Bryan J. Steward

Faculty Publications

Currently, in macro-scale hydrocodes designed to simulate explosive material undergoing shock-induced ignition, the state of the art is to use one of numerous reaction burn rate models. These burn models are designed to estimate the bulk chemical reaction rate. Unfortunately, these burn rate models are largely based on empirical data and must be recalibrated for every new material being simulated. We propose that the use of Arrhenius Rate Chemistry-Informed Interphase Source Terms (ARCIIST) in place of empirically derived burn models will improve the accuracy for these computational codes. A reacting chemistry model of this form was developed for the cyclic …

Laser-Induced Recoverable Surface Patterning On Ni50ti50 Shape Memory Alloys, Saidjafarzoda Ilhom

Masters Theses & Specialist Projects

Shape memory alloys (SMAs) are a unique class of smart materials exhibiting extraordinary properties with a wide range of applications in engineering, biomedical, and aerospace technologies. In this study, an advanced, efficient, low-cost, and highly scalable laser-assisted imprinting method with low environmental impact to create thermally controllable surface patterns is reported. Two different imprinting methods were carried out mainly on Ni50Ti50 (at. %) SMAs by using a nanosecond pulsed Nd:YAG laser operating at 1064 nm wavelength and 10 Hz frequency. First, laser pulses at selected fluences were directly focused on the NiTi surface, which generated pressure pulses of up to …

Investigation Of The Skin Effect In Alternating Currents, Matthew Liang

The International Student Science Fair 2018

My research is on the investigation of the skin effect in alternating currents. The skin effect is when an alternating current tends to flow on the surface of the conductor, such that the current density is highest near the surface, and decreases with greater depths in the conductor. This is due to the alternating current inducing changing magnetic fields, which in turn induces currents that oppose the original flow of current, resisting the current flowing through the centre the most. This reduces the effective cross-sectional area of the conductor and increases the resistance, causing increased power losses. This effect becomes …

Energy Conversion System For Travelers (Ecost), Thipok Bovornratanaraks

The International Student Science Fair 2018

We have innovated “The Energy Conversion System for Travelers” or the ECoST. With the fact that most travelers have wheeled cabin-bags, whilst walking, the wheels will rotate so why don’t we harvest electricity from this kinetic energy? We thus install our innovation, the ECoST, to the bag to generate electricity from the spinning wheels. The electricity is then kept in the storage unit and ready to charge your empty battery devices in an emergency case via a USB port. To make life easy, our ECoST was designed to replicate the power bank charging method; therefore, we can charge …

Modeling Recombination In Solar Cells, Paul Chery

Macalester Journal of Physics and Astronomy

Solar cells are a competitive alternative to nonrenewable energy sources such as fossil fuels. However, the efficiency of these devices is limited by photogenerated carrier recombination. We use a finite difference numerical model to study recombination phenomena in the absorber layer of solar cells including alternate recombination models and the effects of spatial distribution of recombination centers. We compare the effect of using the constant lifetime approximation for recombination to the full Shockley-Read-Hall expression in Silicon solar cells and find that the constant lifetime approximation holds for high defect densities but not for high photon flux densities. Finally, we simulate …

Investigation Of The Skin Effect In Alternating Currents, Matthew Liang

The International Student Science Fair 2018

My research is on the investigation of the skin effect in alternating currents. My project is broken down into 4 sub-aims. The first aim would be, to be able to mathematically model the distribution of current in the radius of the wire, which consists of the applications of the Maxwell equation and solving zeroth order differential Bessel equations of the first kind. The next aim would be to computationally plot out the desired current readings as the depth of the wire increases from the surface, using the Matlab software. The third aim that I have would be conducting an experiment, …

Energy Conversion System For Travelers (Ecost), Thipok Bovornratanaraks

The International Student Science Fair 2018

We have innovated “The Energy Conversion System for Travelers” or the ECoST. With the fact that most travelers have wheeled cabin-bags, whilst walking, the wheels will rotate so why don’t we harvest electricity from this kinetic energy? We thus install our innovation, the ECoST, to the bag to generate electricity from the spinning wheels. The electricity is then kept in the storage unit and ready to charge your empty battery devices in an emergency case via a USB port. To make life easy, our ECoST was designed to replicate the power bank charging method; therefore, we can charge …

Augustana Invitational Robotics Challenge 2018, Forrest Stonedahl

Celebration of Learning

We will be hosting the 3rd Annual Augustana Invitational Robotics Challenge. This event will involve student teams from Augustana and potentially several other schools in the region bringing forth the robots that they have designed, built, and programmed, to compete against one another. This year's challenge task involves the careful relocation of soda pop cans.

On Maxwell-Dirac Isomorphism, Florentin Smarandache, Victor Christianto

Branch Mathematics and Statistics Faculty and Staff Publications

No abstract provided.

Investigation Of The Effects Of Harmful Radiation On Type-Ii Strained Layer Superlattice Focal Plane Arrays Operated In The Long Wave Infrared, Patrick Fumo

Electrical Engineering Theses and Dissertations

In-situ exposure of InAs/InAsSb strained layer superlattice focal plane arrays to gamma-rays revealed the possibility of a detector capable of imaging through a total ionizing dose event. Two long wave infrared focal plane arrays were exposed to a Co⁶⁰ source at dose rates of 60 Rads/s and 70 Rads/s in incremental steps up to a total accumulated dose of 30 kRads. The first device showed no degradation in dark current density with accumulated dose while the second device tested showed a small increase up to 1 kRad and minimal increases with subsequent dose steps. The primary imaging defect in …

Risk Assessment Of Dropped Cylindrical Objects In Offshore Operations, Adelina Steven

University of New Orleans Theses and Dissertations

Dropped object are defined as any object that fall under its own weight from a previously static position or fell due to an applied force from equipment or a moving object. It is among the top ten causes of injuries and fatality in oil and gas industry. To solve this problem, several in-house tools and guidelines is developed over time to assess the risk of dropped objects on the sub-sea structures. This thesis focuses on compiling and comparing those methods in hope to improve the recommended practices available in the market. A simple modification is done on the in-house tools …

Microwave Acoustic Saw Resonators For Stable High-Temperature Harsh-Environment Static And Dynamic Strain Sensing Applications, Anin K. Maskay

Electronic Theses and Dissertations

High-temperature, harsh-environment static and dynamic strain sensors are needed for industrial process monitoring and control, fault detection, structural health monitoring in power plant environments, steel and refractory material manufacturing, aerospace, and defense applications. Sensor operation in the aforementioned extreme environments require robust devices capable of sustaining the targeted high temperatures, while maintaining a stable sensor response. Current technologies face challenges regarding device or system size, complexity, operational temperature, or stability.

Surface acoustic wave (SAW) sensor technology using high temperature capable piezoelectric substrates and thin film technology has favorable properties such as robustness; miniature size; capability of mass production; reduced installation …

Increasing The Longevity Of Tungsten Filaments In A Zone Refiner, Byron D. Greenlee

Senior Theses

Zone refining is used for its ability to purify material and grow single crystals. To produce these single crystals, a suspended molten zone, generated by electron bombardment, passes along the polycrystalline stock. During a zone refining run, the filaments that produce the electron bombardment can fail. In this project, the longevity of tungsten filaments in a zone refiner was investigated. A new bombardment geometry was constructed to attempt to increase the longevity of the filaments. The new geometry had a shield machined into it to prevent line-of-sight impurities originating in the molten zone from striking the filaments. It was found …

Effects Of Tension On Resonant Frequencies Of Strings, Blake Burnett

Senior Theses

This project tests and explores resonance of strings. Since all materials and mechanisms are affected by vibrations, it is important to know the frequencies at which resonance occurs. To explore this subject, strings were used as a model material to test the effect tension has on resonance. The fundamental frequencies and the corresponding modes of resonance were used to analyze the data. The results of this experiment show that increasing tension on a string increases its resonance frequency. Understanding the physics behind resonance frequency allows systems to be designed to take advantage of resonance properties, or to avoid resonance where …

The Effects Of Surface Pace In Baseball, Jason Farlow

Senior Theses

A baseball travels across different surfaces at different paces. The goal of this experiment is to find a percentage difference in speeds the ball will reflect off a given surface. The energy lost on the turf surface was far more significant than on dirt surface as the turf lost an average of 26% of its energy as compared to just 16% of the energy on dirt. In the Northwest conference, teams play on four turf-based infields and five dirt-based infields. The results of this study suggest that kinetic friction forces are more significant in reducing ball rebound speed than in …