Materials Chemistry Commons^™

Study On Electrocatalytic Properties For Oxygen Evolution Of Ti/Iro2-Ta2O5 Anodes With Different Ir Contents, Yong-Lei Xin, Li-Kun Xu, Jun-Tao Wang

Journal of Electrochemistry

The anodes of Ti/IrO₂-Ta₂O₅ were prepared by Pechini method. The effects of coating loading on the surface morphology and electrochemical properties of the anodes were characterized by scanning electron microscope (SEM) ,energy dispersive X-ray detector (EDX), potentiodynamic polarization,cyclic voltammetry and accelerated life test. The results indicate that with the increase of the coating loading,the oxide anode presents evident IrO₂ crystallite segregation,and cracks become narrow and shallow. Moreover,it has larger electrochemically active surface area,better electrocatalytic activity for oxygen evolution and higher stability. It was observed that for an iridium content of 1.98 ～ 9. 08 …

Synthesis And Electrochemical Properties Of Li3V2(Po4)3/C Cathode Materials For Lithium Ion Battery, Li-Ying Liu, Hai-Yan Zhang, Lian Chen, Yu-Chun Zhai

Journal of Electrochemistry

Cathode material Li₃V₂(PO₄) ₃ /C for Lithium-ion battery was synthesized by combination of ball milling and baking. Physical and electrochemical performances of as-prepared materials were characterized through XRD,EIS and galvanostatic cell cycling. The results show that the products were monoclinic Li₃ V₂ (PO₄) ₃ with well-developed crystal structure. At 0. 1C,0. 25C and 0. 5C,the initial discharge capacities were 150. 6,134. 1 and 107. 1 mAh·g^-1 ,respectively. Capacity retention rates were 87. 3% after 130 cycles at 0. 25C and 87. 2% after 105 cycles at 0. 5C. Charge-discharge …

Nano-Sized Au On Nickel Foam As Cathode Of Alkaline Al-H2O2 Semi Fuel Cell, Shu-Li Chen, Bang-An Lu, Yao Liu, Gui-Ling Wang, Dian-Xue Cao

Journal of Electrochemistry

Nano-sized Au particles were deposited on a nickel foam substrate by a fast spontaneous deposition method using AuCl₃ as the source of Au. The effects of AuCl₃ concentration and deposition time on the size and distribution of Au particles,and the performance of the obtained Au/Ni electrode as the cathode of Al-H₂O₂ semi fuel cell were investigated. It was found that after the nickel foam was immersed in a 2 mmol·L^-1 AuCl₃ solution for 60 s,Au particles with diameters smaller than 100 nm were deposited on its surfaces and cover the surface completely. The …

Tuning Quantum Dots Optical Properties By Temperature And Concentration Modulation, Amber Sexton

Renée Crown University Honors Thesis Projects - All

Quantum dots have recently been awarded attention due to their tunable optical and spectroscopic properties. The optical and spectroscopic behavior of quantum dots was investigated as a function of mean particle size. Manipulation of the reaction conditions and constituents impact the controllability of size and surface conditions. Therefore, synthesis of CdSe and CdS semiconductor nanoparticles with tunable particle size were created using temperature, time, and composition as variables. Analytical techniques used to characterize the nanoparticles included fluorescence and electronic absorption. The effect of temperature, aside from changing the size of the particle, also eliminated defects on the surface and caused …

Rational Design Of Self-Assembled Nanostructures Based On Polymers Synthesized Via Aqueous Reversible Addition-Fragmentation Chain Transfer Polymerization, Stacey Kirkland York

Dissertations

Recent advances in reversible addition-fragmentation chain transfer (RAFT) polymerization have allowed the rational, bottom-up design of biorelevant assemblies. Utilizing foresight, polymers can be tailored to self-assemble into nano-, micro-, and macroscopic structures. Given the size scale on which rationally-designed polymers can be tailored, they hold significant promise in the biomedical field. For example, nanoscale materials can be designed to carry small-molecule and gene therapeutics while macroscopic structures can be tailored for cell growth scaffolds. The design process begins by selecting monomers, chain transfer agents, and reaction conditions which will yield the desired polymer architecture and composition.

The work herein builds …

Investigation Of Novel Quasiliving Polyisobutylene Chain-End Functionalization (Quenching) Methods, David Lee Morgan

Dissertations

This volume recounts efforts toward the development and understanding of chain functionalization techniques involving the direct addition of nucleophiles to quasiliving polyisobutylene (PIB). Nucleophiles included in the study were sterically hindered organic bases, (di)sulfides, N-substituted pyrroles, and alkoxybenzenes. A kinetic investigation of the end-quenching of TiCl4-catalyzed quasiliving PIB with sterically hindered amines was used to determine the mode of interaction with TiCl4 and the active species responsible for -proton abstraction. 2,5-disubstituted-N-hydropyrroles formed pyrrole-TiCl3 adducts that were active in formation of exo-olefin chain ends; whereas, with other sterically hindered amines, only an equilibrium fraction of the amine that did not complex …

Nanomaterials From Biologically Active Molecules: Self-Assembly And Molecular Recognition, Min Yu

Dissertations

This dissertation describes the development of molecular assemblies and molecular recognition of phospholipids (PLs) that exhibit potential applications in emerging nanotechnologies. It consists of two parts: (1) structural features of PLs responsible for recognition of synthetic copolymers, and (2) design, synthesis and analysis of magnetic nanotubes obtained from PLs with a common theme of colloidal synthesis served as a platform for film formation and nano-assemblies of nanotubes. Poly(methyl methacrylate/n-butyl acrylate) (p-MMA/nBA) colloidal particles that were stabilized by 1,2-dilauroyl-sn-glycero-3-phosphocholine (DLPC) PLs were synthesized, and upon the particle coalescence, PL stratification resulted in the formation of surface localized ionic clusters (SLICs). These …

Aqueous Raft Synthesis Of Stimuli-Responsive, Amphiphilic Block Copolymers And Self-Assembly Behavior In Solution And Incorporation Into Lbl Films, Matthew Grady Kellum

Dissertations

Of all the living radical polymerization techniques, reversible addition– fragmentation chain transfer (RAFT) polymerization is arguably the most versatile in terms of the reaction conditions (e.g. temperature and solvent selection), monomer selection (e.g. neutral, anionic, cationic, and zwitterionic), and purification. Since the introduction of RAFT in 1998, the McCormick research group and others including the Lowe, Sumerlin, and Davis research groups have synthesized a wide range of (co)polymers with predetermined molecular weights, low polydispersities, and advanced architectures utilizing aqueous RAFT (ARAFT) polymerization. These research groups have also studied how various block copolymers exhibit stimuli-responsive behavior due to a change in …

Multi Stimuli-Responsive Copolymers Obtained From Colloidal Dispersions, Fang Liu

Dissertations

This dissertation describes the design, synthesis, and development of multi stimuli-responsive random copolymers that exhibit collective responsiveness to temperature, pH or electromagnetic radiation. New colloidal particles of poly(N-(DL)-(1- Hydroxyymethyl) propylmethacrylamide/n-butyl acrylate) (p(DL-HMPMA/nBA) and poly(2-(N,N′-dimethylamino)ethyl methacrylate/n-butyl acrylate) (p(DMAEMA/nBA)) were synthesized, which upon coalesce to form solid continuous films. The presence of lower glass transition (Tg) nBA components not only facilitate film formation, but also provide sufficient free volume for polymer chain rearrangements. These studies showed that coalesced films exhibit 3D dimensional changes upon external stimuli, which are attributed to the collapse and conformational changes of stimuli-responsive components as well as buckling …

Synthesis, Characterization, And Deuterium Labeling Of Polyamides Studied By Nuclear Magnetic Resonance Spectroscopy, Christopher Allen Lange

Dissertations

The synthesis, characterization, and deuterium labeling of polyamides have been investigated. In Chapter II, selective deuterium labeling of various polyamides was demonstrated via a facile method which does not require organic solvent or catalyst. Quantitative solution-state NMR analysis showed deuterium incorporation at the carbon alpha to the carbonyl ranged from 20-75%. Incorporation in ε-caprolactam increased with repeated treatments. Isotopic shift effects for the deuterated materials were additive for all sites within experimental error.

In Chapter III, the effect of stoichiometric imbalances on the polymerization of poly(dodecamethylene terephthalamide)was investigated. Molecular weight was varied by polymerizing the monomer salt with excess diaminododecane, …

Structure-Property Relationships In The Formation Of Polyphenylsulfone Molecular Composites And Nanocomposites, Paul Joseph Jones

Dissertations

As the constituent phases in a polymer composite approach the molecular level, specific phenomena occur that can lead to significant changes in material properties when only minimal quantities of the additive are incorporated into the polymer matrix. Molecular composite and nanocomposites are state-of-the-art polymeric materials that contain nanostructured additives effectively dispersed within polymer matrices. The properties of molecular composites and nanocomposites are directly related to the interactions of the nanostructured additive and the polymer matrix. Subtle changes to the nanostructured additive can have profound effects on the ultimate properties of the composite material. Therefore, understanding the structure-property relationships in these …

Classification, Synthesis And Characterization Of Pyridyl Porphyrin Frameworks, Lucas D. Devries

Department of Chemistry: Dissertations, Theses, and Student Research

Structural analysis of a solid-state material is vital because the structure often determines the physical (or chemical) properties of the material. An understanding of the relationship between structural components and bulk properties can be used to design materials with specific properties. To achieve such understanding, two things are required: a rigorous structural analysis method and a study of the properties of materials with noteworthy structural features. In this thesis, the author reviews 44 pyridyl porphyrin frameworks in an effort to determine how these framework structures are formed, and if any overreaching trends can be observed. The observed trends are used …

Palm Oil-Based Polyester Binder For Making Fiberboards., Wong Yew Chuan

Student Works (2010-2019)

Palm kernel oil was used as a raw material for the synthesis of polyester polyol.The palm oil based polyester polyol was synthesized using glycerol, phthalic anhydride and fumaric acid. Palm oil based polyester polyol combines with methylene diphenyl diisocyanate (MDI) to form the polyurethane binder. The fibers are derived from empty fruit bunch (EFB) of the palm tree and have the acceptable mechanical properties. In this project, palm fibers were converted into palm fiberboards by using polyurethane (PU) binder under specified pressure and temperature. The binder to fiber ratio was varied from 10% to 30 % by dried weight of …

Self-Activating Safety Mechanisms For Li-Ion Batteries, Xin-Ping Ai, Yu-Liang Cao, Han-Xi Yang

Journal of Electrochemistry

The safety concerns of LIBs are considered to be a main obstacle to their high rate or large capacity applications in electric vehicles.This paper describes briefly our research works on the development of self-activating safety mechanisms for LIBs,including redox shuttle,potential-sensitive separator,temperature-sensitive electrode,and fire-retardent electrolyte.The problems and future in this research area are also discussed.

The Synthesise Of Electron-Conducting Redox Hydrogel And Its Application In Microbial Fuel Cell, Kai-Peng Wang, Sheng-Li Chen

Journal of Electrochemistry

Efficient electron transfer between the microbe and the anode is key for the electricity generation in Microbial fuel cell(MFC).Through the modification of anode,the rate of electron transfer can be accelerated,therefore the performance of MFC can be enhanced.In this paper,we report the synthesis of a type of electronconducting and bio-compatible redox hydrogel and its application.The hydrogel consists of poly(4-vinylpyridine) as backbone and neutral red as the redox center.By immobiliazing neutral red on the backbone through covalent bond,the secondary contamination due to the soluble redox mediator to external environment can be prevented.MFCs using the hydrogel-modified carbon anode significantly exhibit shorter acclimation period,and …

Effects Of Different Carbon Sources On Performance Of Li3V2(Po4)3/C Composite Cathode Materials, Kai-Yuan Liu, Jian-Shu Huang, Li Yang

Journal of Electrochemistry

The monoclinic Li₃V₂(PO₄)₃ cathode materials were prepared by carbothermal reduction method,with methyl cellulose, chitosan(crab shells) or glucose anhydrous as carbon sources, respectively.The crystal structures, morphologies and the electrochemical performances were characterized by XRD, SEM and electrochemical measurement. The XRD patterns show that the samples obtained at 800 ℃ for 6 h have a pure monoclinic structure,which indicates that the carbon exists in amorphous phase. Electrochemical measurements show that the difference of carbon sources has a significant influence on the electrochemical properties of the materials. The Li₃V₂(PO₄)_{3 …}

Performance Of Sulfur-Super Conductive Carbon Black Composite In Electrolyte Mixed With Room Temperature Ionic Liquid, Bo Zhang, Si-Ting Chen, Xue-Ping Gao

Journal of Electrochemistry

The sulfur-super conductive carbon black composite was prepared as cathode material of lithium/sulfur battery.The composite was characterized by scanning electron microscopy(SEM),X-ray diffraction(XRD),and electrochemical impedance spectroscopy(EIS).The sulfur composite shows a high discharge capacity and a good cycle performance in electrolyte mixed with 50% of room temperature ionic liquid.In particular,the discharge capacity of the composite was stabilized at 483.6 mAh/g after 50 cycles.

Electrochemical Properties Of Ni(Oh)2 Doped By Nio, Fei-Biao Chen, Bo-Rong Wu, Wei-Feng An, Zhao-Jun Yang, Feng Wu, Shi Chen

Journal of Electrochemistry

The Ni(OH)₂ cathode material of MH/Ni was doped by NiO,which behaves as a capacitor and can improve the charge-discharge rate capacity of Ni(OH)₂.The electrochemical properties of Ni(OH)₂ was characterized by charge-discharge curves and cyclic voltammetry.The results showed that the material had the best discharge property when doped by 5% NiO,and the discharge specific capacity could reach 310.1 mAh/g at 0.2 C rate and remianed 79.5% at 3 C rate.The difference oxidation and reduction potentials between the of the battery was 164 mV when the Ni(OH)₂ was doped by 5% NiO,which showed a good cyclic property.

Application Of Sol-Gel Technology In The Of Activation Process Of Chemical Plating Pretreatment, Lin Zhang, Wei Wang, Qian-Zhen Wu

Journal of Electrochemistry

Using KH-550 as precursors,gel thin films were formed on fabric by sol-gel method.By complexed with palladium ions due to the presences of amido and hydroxide in the gel thin films,the aggregation of palladium particles was inhibited.Therefore,Palladium could exhibit better catalytic activity in the process of electroless plating.The surface morphology of fabric was observed by SPM and SEM.Campared with the traditional pretreatment process,no SnCl₂ was needed.This method reduced pollution,shortened process flow and reduced the amount of noble metals.

Applications Of Block Copolymer Films In The Field Of Electrochemical Energy Systems, Jing-Ze Li, Guo-Guang Chen, Di Mei, Wei Zou, Jian-Wen Li, Motonori Komura, Tomokazu Iyoda

Journal of Electrochemistry

A new series of amphiphilic liquid crystalline block copolymer thin films,having normally aligned and highly ordered nanocylinder array,were functionalized as anisotropic ion conducting materials by selectively infiltration.These ion-active nanocylinders are coaxially aligned and hexagonally arranged in a large area,which might be used as novel types of electrolyte films for electrochemical energy systems such as lithium ion battery,fuel cell,etc.Since the ordered cylinders can carry on and store the ions,the block copolymer films can be utilized as the advanced template to fabricate the ordered array of nanoporous,nanoparticles,and nanowires for the potential application in lithium ion battery as three dimensional electrode materials.