Prosthodontics and Prosthodontology Commons^™

Immediate Loading Of Unsplinted Implants In The Anterior Mandible For Overdentures, Phillip Roe

Loma Linda University Electronic Theses, Dissertations & Projects

In this one-year prospective study, eight completely edentulous patients were selected from the Loma Linda University School of Dentistry (LLUSD) patient population to participate. There were five male and three female patients, between the ages of 58 and 82 (mean age of 69.1 years). All participants received new maxillary and mandibular complete dentures prior to implant placement. Two 4.0 mm x 13 mm threaded implants with a fluoride-modified, micro-roughened, titanium surface were placed mesial to each mandibular canine position. Locator abutments were connected and torqued to 25 Ncm and primary closure was achieved with a nonresorbable suture material. The Locator …

Short-Term Clinical Evaluation Of Nobelreplace® Tapered Groovy Implant, Manouchehr Pouresmail

Loma Linda University Electronic Theses, Dissertations & Projects

The purpose of this clinical investigation was to make comparisons and to achieve estimates of the short-term implant success, marginal bone resorption, and soft tissue responses around the immediately loaded NobelReplace® Tapered groovy implant (with groove on a rough collar portion) as compared to an implant without a groove on the collar (Replace®Select Tapered). This was a randomized controlled and prospective investigation in which subjects were consecutively included according to strict inclusion/exclusion criteria. Single stage procedure was used with immediate function. Seventeen subjects were recruited, and were randomly divided in two groups. Each group was received the predetermined type of …

An In-Vitro Investigation Of The Physical Properties Of Alginate Alternatives, Rishi Dinesh Patel

Loma Linda University Electronic Theses, Dissertations & Projects

The purpose of this study was to evaluate the detail reproduction, gypsum compatibility and linear dimensional change of three recently introduced irreversible hydrocolloid (alginate) alternatives. The materials that were tested are Position Penta Quick® (3M ESPE™), Silgimix® (Sultan Dental) and Alginot® (Kerr™). These materials were tested in accordance with ANSI/ADA Specification No. 18 for Alginate Impression Materials and No. 19 for Dental Elastomeric Impression materials. The irreversible hydrocolloid impression material Jeltrate Plus antimicrobial® (Dentsply Caulk™) served as the control.

MATERIALS AND METHODS: The ADA specification die was used to undertake the testing of the new materials. The parameters of detail …

Immediate Provionalization Of Single Threaded Oxidized Implants On Maxillary Premolars Healed Sites: One-Year Study, Kiyotaka Umezu

Loma Linda University Electronic Theses, Dissertations & Projects

Osseointegrated endosseous implants have been widely used and become a predictable treatment option for completely and partially edentulous patients. The viability and predictability of this treatment modality have been supported with the high success rates in numerous studies. Clinical guideline requires a healing period of 3 to 6 months without functional loading to achieve osseointegration with machine surface implants. Therefore, numerous studies on immediately loaded implants have been conducted in an attempt to minimize or eliminate this healing period. The purpose of this study was to evaluate the success rate of the immediately provisionalized oxidized-surface implants in healed sites supporting …

Immediate Provisionalization Of Single 3.0 Mm Diameter Implant In Maxillary And Mandibular Anterior Region, Kotaro Oyama

Loma Linda University Electronic Theses, Dissertations & Projects

Immediate provisionalization of single implants with standard (3.75 - 4.5 mm) and wide diameter (> 4.5 mm) has been well documented. When the space is limited, small diameter implants (3.0 mm) must be used. Although high success rates have been reported, they were limited to healed site and were placed as staged procedures. The purpose of this prospective study was to evaluate the success rate and peri-implant tissue response of small diameter (3.0 mm) implants undergoing immediate provisionalization in the esthetic area.

Eleven patients who had missing maxillary lateral incisor(s) and/or mandibular incisor(s) participated in this study. Thirteen 3.0 mm …

Effect Of Gutta Percha On The Retention Of A Post Using Different Cements, Saeda H. Basta

Loma Linda University Electronic Theses, Dissertations & Projects

This study evaluated the effect of residual gutta percha on the retention strength of prefabricated post cemented with four different cements. Forty intact mandibular single canal canines or premolars were selected for standardized size and quality, endodontically treated, and decoronated to the cementoenamel junction. A post space was prepared to accommodate Para post XP size 4 (Coltene, Whaledent Inc., Cuy Falls, Ohio) to a depth of 8 mm. The Obtura heated gutta percha system was used to inject a very thin line of gutta percha along one lateral wall to the depth of the future post. Forty obturated teeth were …

A Mechanical And Histological Study Of Functionally Graded Hydroxyapatite Implant Coatings, Suzanne Kemp Coco

Theses and Dissertations (ETD)

Ever since Dr. Brånemark discovered that titanium was biocompatible with bone, extensive research has been done to improve the osseointegration of dental implants. As advances in medicine continue, the average life span of the population is ever increasing. Today, people of all ages are investing more money and time into dental treatment than ever before. Patients are becoming more educated on dental treatment options and expect the best treatment possible. As a result, the replacement of missing teeth with implants is becoming more and more commonplace in dental practices.

The purpose of the present study is to evaluate bone-implant interaction …

Effect Of Different Border Molding Materials On Complete Denture Retention, Fardos N. Rizk

Dentistry

No abstract provided.

Immediate Implant Placement In Extraction Sites With Periapical Lesions: A Retrospective Study, Yuan-Lung Hung

Loma Linda University Electronic Theses, Dissertations & Projects

Immediate implant placement into fresh extraction sites has become a relatively routine clinical procedure with a favorable prognosis. However, immediate placement into extraction sockets with lesions has not been extensively documented in humans. Therefore, the purpose of this study was to retrospectively determine the survival rate of implants placed into extraction sockets with visible periapical lesions.

Patient charts of 544 immediately placed implants from Loma Linda University School of Dentistry, Center for Prosthodontics and Implant Dentistry were examined. Eighty-six of the 544 implants had been placed immediately into extraction sockets with periapical lesions and they were included in this study. …

Evaluation Of Osseointegration Between Two Different Modalities Of Hydroxyapatite Implant Surface Coatings: Plasma Sprayed Ha Coated Implants And Electrophoresis Deposited Nano Ha Coated Implants, Audrey Marie Selecman

Theses and Dissertations (ETD)

Purpose: The objective of this study was to evaluate the osseointegration between plasma sprayed (PS) hydroxyapatite (HA) coated implants and electrophoresis deposited (EPD) nano hydroxyapatite coated implants in an animal model. The quantity of osseointegration was inferred by interfacial strength and percent tissue-contact length.Materials and Methods: Thirty-six cylindrical implants (18 PS and 18 EPD) were placed into dog mandibles. Nine implants from each group were evaluated with pull out testing and histological studies at 12 weeks after implantation. The remaining implants were occlusally loaded for 9 months and then evaluated by pull out testing and histological studies.Results: Twelve weeks after …

A Comparison Of Cadiax Axiography & Newtom 3g Tomography Condylar Measurements, David Phillip Brock

Loma Linda University Electronic Theses, Dissertations & Projects

This study compared the curves for the mandibular movement obtained from computerized axiography (Cadiax) and NewTom 3G cone beam volumetric tomography.

Fifteen subjects (n=15) from the Loma Linda University School of Dentistry obtained a Cadiax mandibular jaw tracing and a NewTom 3G scan of their condyles and surrounding structures while in centric relation (CR). In addition, three condylar measurements obtained from the Cadiax and the NewTom 3G were compared: sagittal eminential angle (SEA), progressive mandibular lateral translation (PMLT), and early mandibular lateral translation (EMLT).

No differences were noted between the Cadiax and the NewTom 3G mandibular tracings when the gender …

Survival Analysis Of Complete Veneer Crowns Vs. Multisurface Restorations: A Dental School Patient Population, Charles E. Janus, John W. Unger, Al M. Best

Prosthodontics Publications

The purpose of this study was to compare the longevity of crowns versus large multisurface restorations in posterior teeth. The investigation used the treatment database at Virginia Commonwealth University School of Dentistry. The inclusion criteria for the final data set used for analysis were: only one restored tooth per patient, premolars with three or more restored surfaces, molars with four or more restored surfaces, molars and premolars restored with complete veneer metal crowns, or crowns veneered with metal and porcelain. The Kaplan-Meier approach was used to visualize the survival curves, and the Cox proportional hazards model was used for analysis …

Comparative Tensile Strengths Of Preceramic And Postceramic Solder Connectors Using High-Palladium Alloy, Abdul-Hadi Shehab

Theses and Dissertations

Purpose: To evaluate the tensile strength properties of Rx Naturelle Plus and Option (high-palladium) alloys on soldered connectors under simulated preceramic and postceramic soldering conditions. Materials and methods: Eighty cylindrical castings were fabricated (40 using Rx Naturelle Plus alloy and 40 using Option alloy). The 40 castings for each alloy were subdivided into 2 groups of 20 each. In the first group, castings for each alloy were randomly paired and soldered with SMG2 solder to produce 10 preceramic test connector specimens for each alloy. In the second group, castings were similarly paired and soldered with 490 fine solder to produce …

Influence Of A 3-Step Disinfection Procedure On Dentin Bond Strength, Maria Pappas

Theses and Dissertations

Statement of problem. Clinicians have used disinfection materials to remove surface contaminants during cavity preparation. It has been postulated that disinfection materials may negatively affect shear bond strength of restorative materials. If so, large numbers of restorations may be predestined for early failure with the use of a disinfection protocol.Purpose. To determine whether there is a difference in the bond strength between dentin and composite resin with a 3-step disinfection technique compared to a conventional bonding technique without the additional disinfection protocol.Material and Methods. Sixty human molar teeth were sectioned parallel to the occlusal surface to expose mid-coronal dentin and …

Dental Treatment Options For Snoring - A Pilot Study, Kainaz Khushrooh Byramjee

Loma Linda University Electronic Theses, Dissertations & Projects

This study compared the effectiveness of an anterior repositioning device, the Silent Nite®, to two new treatments in their ability to stop/reduce snoring. Comfort and side effects of each treatment were also evaluated.

Twenty-three subjects, in good medical condition along with their spouse/partner participated in the five-week study. A disposable sleep apnea screener, SleepStrip,™ was used to select only non-sleep apnea patients. The treatments tested were: (1) Silent Nite® (control - Treatment A), (2) Loma Linda Appliance (Treatment B), and (3) Snore Tape (Treatment C). Each participant received all three treatments separated by a one week "wash-out" period of no …

Quantification Of Bone Deposition In Onlay Bone Grafting, Gregory Alan Kammeyer

Loma Linda University Electronic Theses, Dissertations & Projects

The purpose of this study was to quantitatively evaluate; 1) mandibular posterior mono-cortical block onlay bone graft success rates 2) the amount of grafted bone retained after initial resorption in radiographic projections. Seven consecutive patients with 14 mandibular posterior implant sites requiring bone augmentation for implants of a standard 3.8mm x 10mm dimension were sought. Mono-cortical block bone grafts from the ipsilateral ascending ramus were placed then observed with two standardized CT scans, dividing them into two groups: Group A had the first CT at 4 weeks after graft placement and a second taken before Prosthodontic reconstruction, 36.7 weeks later. …

Evaluation Of Shear Bond Strength Of Two Resin-Modified Glass-Ionomer Cements, Emily Y. Ro

Theses and Dissertations

Purpose: To compare the in-vitro shear bond strengths of a new paste-paste formulation of resin-modified glass-ionomer cement (Rm-GIC) to an exising powder-liquid formulation. The study will test the hypothesis that the new paste-paste formulation of Rm-GIC (Fuji-Cem ™, GC Corp, Tokyo, Japan) has the same bond strength as an existing popular powder-liquid formulation of Rm-GIC (Rely-X ™ Luting Cement, 3M, St. Paul, MN)Materials and Methods: A total of 33 human molars were sectioned parallel to the occlusal surface to expose mid-coronal dentin and mounted parallel to the bond shearing device on the universal testing machine (Instron). For Group I samples …

The Bond Strength Of Adhesive Resin Cement: Time Differential Between Cementation And Finishing Of Cast Dowel-Cores, Purnima Joan Shahani

Theses and Dissertations

THE BOND STREGTH OF ADHESIVE RESIN CEMENT: TIME DIFFERENTIAL BETWEEN CEMENTATION AND FINISHING OF CAST DOWEL-CORES By Purnima Joan Shahani, D.D.S., M.S.A Thesis submitted in partial fulfillment of the requirements for the degree of Master of Science in Dentistry at Virginia Commonwealth University.Virginia Commonwealth University, 2003Major Director: Peter C. Moon, M.S., PhDDirector of VCU Dental Biomaterials LaboratoryThis study compared the retention of cast dowel-cores cemented with Panavia® 21 subjected to immediate versus delayed high-speed finishing. Conventionally, finishing is delayed for 24 hours to one week to allow for optimal setting and ultimate strength of the cement. Forty-five recently extracted human …

An In-Vitro Comparison Of The Retention Of Prefabricated Parallel-Sided Vented Titanium Posts Cemented With Three Different Dual-Polymerizable Resin Cements, Maha Mamdouh Mostafa El-Sayed

Theses and Dissertations

AbstractAN IN-VITRO COMPARISON OF THE RETENTION OF PREFABRICATED PARALLEL-SIDED VENTED TITANIUM POSTS CEMENTED WITH THREE DIFFERENT DUAL-POLYMERIZABLE RESIN CEMENTSBy Maha M. El-Sayed, B.D.S., D.M.D.A Thesis submitted in partial fulfillment of the requirements for the degree of Master of Science at Virginia Commonwealth University.Virginia Commonwealth University, 2003Thesis Director: David R. Burns, D.M.D. Associate Professor and Program DirectorGraduate ProsthodonticsDepartment of ProsthodonticsPurpose: The purpose of this in-vitro study was to compare the retentive strength of an autopolymerizing resin cement to three dual-polymerizable resin cements when used to cement paraposts without light activation and to relate diametral tensile stress and hardness as a measure …

Evaluation Of Three Bonding Agents In The Repair Of Fractured Veneered Stainless Steel Crowns, Jennifer Liane Hoffer

Loma Linda University Electronic Theses, Dissertations & Projects

Dentists have long been challenged with finding an esthetic yet durable treatment option to restore badly carious anterior teeth. Veneered stainless steel crowns have become one of these options, but these restorations often return with the veneer fractured. To help restore esthetics, the crown may either be replaced or the veneer must be repaired. The purpose of this study was to evaluate the use of three bonding agents (PQ1, C&B Metabond, and Panavia) and one restorative material (Filtek Z250, 3M) in the repair of these fractured stainless steel crown veneers. The clinical significance is to determine the best methods of …

Marginal Discrepancy Of Components Utilized For Implant Framework Construction, Mathew Thomas Kattadiyil

Loma Linda University Electronic Theses, Dissertations & Projects

This study evaluated marginal fit discrepancy of the abutment-implant body interface employing various components commonly utilized for implant framework fabrication. Four types of components ( castable plastic patterns, premachined gold abutments, premachined titanium abutments and CAD-CAM custom premachined titanium abutments) were evaluated. Five castable plastic patterns and five premachined gold abutme~ts from each of two manufacturers, five premachined titanium abutments and five CAD-CAM custom premachined titanium abutments were used. Components were affixed to a 3.75 x 10 mm dental implant and standardized measurements were obtained of the abutment-implant interface using a computerassisted microscope at various experimental time intervals. Measurements of …

Influence Of Surface Treatment On Physical Properties Of Dental Porcelain, Anna M. De Ycaza De Boyd

Master's Theses

No abstract provided.

The Design Of A Palatal Expansion Appliance, Kelly R. Conway

Master's Theses

No abstract provided.

Tensile And Shear Bond Strengths Of Bis-Gma Adhesives To Cast Etched Alloy, James J. Koelbl

Master's Theses

No abstract provided.

A Proposed Format For Mandibular Displacement Analysis In Fixed Prosthodontics, Timothy O. Hart

Master's Theses

No abstract provided.

Determination Of The Gingival Crevicular Fluid Volumes Associated With Restored (Fixed And Removable Prosthodontics) And Non-Restored Teeth, Pamela Denise Golasz

Master's Theses

No abstract provided.

Determination Of The Gingival Inflammatory Levels Associated With Abutment Teeth Used For Fixed Prosthodontics, Thomas E. Yuhas

Master's Theses

No abstract provided.

Dentures: What You Don't Know Can Hurt You (1978), American Dental Association

Patient Dental Health Education Materials 1929-1981

No abstract provided.

Have Missing Teeth Replaced (1978), American Dental Association

Patient Dental Health Education Materials 1929-1981

No abstract provided.

Between You And Me… Is Your Smile (1977), American Dental Association

Patient Dental Health Education Materials 1929-1981

No abstract provided.