Orthodontics and Orthodontology Commons^™

Effect Of Mechanical Vibration On Resistance To Sliding In The Fixed Orthodontic Appliance, David Robert Kennedy

Master's Theses (2009 -)

Objective: To determine the effects of mechanical vibrations produced from electric tooth brushes and a commercially available device called AcceleDent, on the resistance to sliding at the bracket-arch wire interface. Materials and Methods: All as-received wires and brackets were cleaned with 95% ethanol prior to testing. An individual metal bracket was mounted on a custom metal fixture. The custom metal fixture had a polyurethane material that resembled the mechanical feature of the human periodontal ligament. The test metal bracket was aligned and bonded passively with 4 other non-movable brackets using a straight piece of .0215" X .025" SS wire. Another …

Frequency Of Dentofacial Asymmetries: A Cross-Sectional Study On Orthodontic Patients, Nita Kumari Bhateja, Mubassar Fida, Attiya Shaikh

Section of Dental-Oral Maxillofacial Surgery

Background: Correction of orthodontic asymmetries is crucial to achieve functional occlusion, aesthetics and stability of post orthodontic treatment results. To date valid frequency data of dentofacial asymmetries in Pakistani orthodontic patients do not exist to document orthodontic treatment need. The objectives of this study were to determine frequency of dento-facial asymmetries, severity of dental asymmetries and to determine difference in frequency of dentofacial asymmetries in mixed and permanent dentition.
Methods: The sample of this cross-sectional study comprised of 280 patients (177 females and 103 males) with no history of previous orthodontic treatment having no craniofacial anomalies. Dento-facial asymmetries were assessed …

Correlating Vomer With Ceph Vectors In High And Low Mandibular Plane Angle Cases, Christopher James Wood

Loma Linda University Electronic Theses, Dissertations & Projects

Introduction: Growth of the maxilla and mandible follow identifiable vectors of facial growth such as the Rickett’s Facial Axis (FA) and the Down’s Y-axis (YA). The purpose of this study was to evaluate the correlation between the anterior inferior vomer axis (AIVA) and posterior inferior vomer axis (PIVA) with the FA and YA in cases with high (32 degrees and above) and low (20 degrees and below) mandibular plane angles.

Methods: Pretreatment cone beam computed tomography (CBCT) scans of 94 patients treated at the Loma Linda University Graduate Orthodontic Clinic meeting the inclusion criteria were used in this …

Effect Of Attending Doctor Changes On Orthodontic Treatment Times And Results, Emily Caskey Peppers

Loma Linda University Electronic Theses, Dissertations & Projects

Introduction: The objective of this study was to determine if there was any significant difference in treatment time or results due to varying levels of attending doctor coverage in the Loma Linda University (LLU) graduate orthodontics clinic. Methods and Materials: The main study group of 191 subjects was split into high, medium and low coverage groups by primary attending doctor coverage and then by original attending doctor coverage. Treatment times, treatment results, and other variables were evaluated for each of the groups. Treatment results were evaluated using UK Peer Assessment Rating (PAR) scores. A second study group (289 subjects) included …

Comparison Between Ceph Analysis On Lateral Cephs, Cbct Scans, And Mri Scans, Jeffrey W. Lam

Loma Linda University Electronic Theses, Dissertations & Projects

Introduction: Most current methods of obtaining images for orthodontic diagnosis and treatment planning involve the use of ionizing radiation. Given that patients often need records taken several times during treatment, an alternative should be found that does not involve ionizing radiation. Magnetic resonance imaging (MRI) exists as a possible alternative. Purpose: The purpose of this study is to compare cephalometric measurements obtained from lateral cephs, cone beam computed tomography (CBCT) scans, and MR scans. Methods: Lateral cephs, CBCTs, and MRIs were taken on 22 patients. 3 separate readers traced the images and the data was analyzed using Bland-Altman plots. Results: …

Comparison Of Digital And Cbct Synthesized Lateral Cephalograms, Da Lee

Loma Linda University Electronic Theses, Dissertations & Projects

Purpose: The purpose of this study was to compare the precision of lateral cephalometric Ricketts analysis measurements from NewTom 5G CBCT (NewTom) synthesized lateral cephalograms with Sirona Orthophos XG Plus (Sirona) digital lateral cephalograms. Materials & Methods: A Sirona digital lateral cephalogram and a NewTom synthesized lateral cephalogram of a phantom in the orthogonal and perspective projections were created. Metal washers in each plane of the phantom were measured in the vertical and horizontal dimensions and compared across the different imaging modalities. In Group 1, forty patients were randomly selected from the Loma Linda University Graduate Orthodontic Clinic who had …

Periodontal Health Of Anterior Teeth With Two Types Of Fixed Retainers, Andrew I. Corbett

Loma Linda University Electronic Theses, Dissertations & Projects

Introduction: Fixed retainers for anterior teeth have become a popular method for maintaining the position and function of teeth after orthodontic treatment. Various retainer designs, wire sizes and types have been used over the years. One problem with fixed retainers is that they complicate oral hygiene and therefore might negatively affect the periodontal tissues if left in place for long periods of time. Purpose: The purpose of this study is to compare the periodontal health of maxillary and mandibular anterior teeth retained with two different types of fixed retainers. Methods: Male and female subjects who had been in continuous orthodontic …

Photos And Silhouettes In Evaluating The Need For Bsso Surgery In Adult Females, Jessicah L. Moretz

Loma Linda University Electronic Theses, Dissertations & Projects

Introduction: The objective of this study was to determine the anterior/posterior position of the mandible at which an orthodontist and oral surgeon would advise bilateral sagittal split osteotomy advancement or set back when evaluating adult female photos and silhouettes. Material & Methods: Fifty-one adult female profile photos and lateral cephalograms were collected. Subjects were selected who met three criteria: 1) ANB of 0-2, 2) balanced profile image, and 3) age greater than 18. The image and cephalometric tracing were morphed together to allow software simulation of mandibular prognathia and retrognathia in 2 mm increments. Orthodontists and oral surgeons evaluated morphed …

Changes In Pharyngeal Airway Dimensions Due To Mara Treatment In Class Ii Malocclusions, James K. Dillehay

Theses and Dissertations (ETD)

Orthodontic treatment effects on the pharyngeal airway have recently become a hot topic in the field of orthodontics. Current literature has shown facial skeletal morphology to be correlated with pharyngeal airway shape and volume. This study used CBCT imaging to identify what, if any, effects two different treatment modalities for correcting Class II malocclusions have on the pharyngeal airway volume. This retrospective study consisted of two groups of Class II patients: 38 patients (15 females, 23 males) treated with the MARA and an Edgewise appliance and 32 patients treated with an Edgewise appliance and Class II elastics. Both pre and …

Treatment Effects Of The Mandibular Anterior Repositioning Appliance (Mara) And Conventional Orthodontic Mechanics On Temporomandibular Joint Morphology: A Comparison Using Cone Beam Computed Tomography, Brenton E. Glassell

Theses and Dissertations (ETD)

Introduction: An ongoing debate exists in orthodontics about the amount of condylefossa remodeling and growth seen in Class II patients using functional appliance therapy. Some clinicians and researchers have found that that the use of functional appliances increases the amount of condylar growth and subsequent Class II skeletal correction; others believe that the mandible has a preset amount of growth and that conventional orthodontics will result in a similar amount of condylar growth to functional appliance therapy. Purpose: The aim of this study was to compare condylar remodeling in functional appliance treatment using the mandibular anterior repositioning appliance (MARA) to …

Premaxillary Characteristics In Complete Bilateral Cleft Lip And Palate: A Predictor For Treatment Outcome, Noha Ibrahim Abdelrahman Professor, Islam Tarek Hassan Professor

Dentistry

Objectives:

The aim of the current study was to investigate how bilateral cleft lip and palate (BCLP) cases responded differently to presurgical orthopedics (PSO) and primary lip repair (LR) based on premaxillary characteristics. We suggest a clinically oriented descriptive classification for BCLP based on premaxillary characteristics.

Design and Setting:

A retrospective longitudinal comparative study where available records of all non-syndromic patients with complete BCLP attending the Cleft Clinic, affiliated to the Oral and Maxillofacial Surgery department, Ain-Shams University, Cairo, Egypt were assessed.

Sample Population and Methodology:

Twenty-two cases were collected over a 4-years period from 2008 to 2011 (15 boys …

An Analysis Of Adhesion Promoters On Shear Bond Strength Of Orthodontic Brackets To Teeth, Loren Andrew Cadelinia

UNLV Theses, Dissertations, Professional Papers, and Capstones

Purpose:The aim of this study was to evaluate the shear bond strength of two adhesion promoters, EnhancetmLC and AssureRUniversal Bonding Resin, and their effects with two different adhesion systems (Light Bondtmand TransbondtmXT). To better understand their behavior upon failure, the amount of adhesive remnant remaining on the tooth surface was also observed.

Methods:One-hundred forty human premolars, which were extracted for reasons other than this study, were utilized and divided into seven groups of 20 teeth each. Groups A1 and B1 were bonded without adhesion promoters and with two different adhesive systems - Light Bondtmand TransbondtmXT. Groups A2 and B2 were …

Frictional Forces Of A Fixed, Esthetic Orthodontic Appliance System, Brady Michael Nance

UNLV Theses, Dissertations, Professional Papers, and Capstones

Purpose: The demands of an all esthetic fixed orthodontic appliance system are ever increasing in today's world. Frictional values of an esthetic, fixed orthodontic appliance system are needed to evaluate their clinical effectiveness for orthodontic treatment. The aim of this study is to evaluate the frictional values of various esthetic orthodontic archwires ligated to an esthetic orthodontic bracket.

Methods: Three types of stainless steel and nickel titanium alloy (niti) esthetic orthodontic archwires (epoxy, poly, plastic) in four sizes (.016, .018, .017 x .025, .019 x .025 inches) were ligated to both a stainless steel bracket system and a ceramic (esthetic) …

Effectiveness Of Resin Infiltration And Mi Paste Cpp-Acp In Masking White Spot Lesions, Melissa Wu Bailey

Loma Linda University Electronic Theses, Dissertations & Projects

The development of decalcification around orthodontic brackets and bands, commonly called white spot lesions (WSLs), is often observed in patients with poor oral hygiene during treatment (Behnan et al., 2010, Rodgers et al., 2010). In many instances, these WSLs continue to be visible after the removal of fixed appliances and after natural remineralization. The purpose of this in vitro study was to compare the effectiveness of two treatment modalities, resin infiltration (RI) and Casein Phosphopeptide Amorphous Calcium Phosphate (CPP-ACP), at improving the light reflectivity and thus the appearance of WSLs using spectrophotometric analysis. Sixty extracted human third molars were partially …

Accuracy Of Ortho Insight 3d Digital Scanner In Mesial-Distal Tooth Measurements, Andrew A. Ferris

Loma Linda University Electronic Theses, Dissertations & Projects

Introduction: Digital scanners and software may be used to measure mesial-distal (MD) tooth width for orthodontic diagnosis and treatment planning. Although there have been many studies performed on different digital scanners, accuracy of mesial-distal tooth measurements using the Ortho Insight 3D scanner and its software (Motionview Software LLC) has not been reported. Purpose: The objective of this study was to determine if the MD tooth measurements from the digital models scanned by Ortho Insight 3D are accurate compared to the measurements taken directly from the teeth and models with a digital caliper. Material and Methods: Individual MD tooth measurements were …

Dental And Buccal Bone Stability After Rapid Maxillary Expansion And Fixed Orthodontic Treatment, Allison Milliner

Loma Linda University Electronic Theses, Dissertations & Projects

The objective of this study was to quantitatively evaluate, via CBCT, the dental and osseous effects of patients who had completed comprehensive orthodontic treatment with rapid maxillary expansion (RME) in conjunction with Ricketts prescription brackets. Thirty consecutive patients (16 males, 14 females; mean age = 13.9  1.9 years) who required RME as part of their orthodontic treatment and had pre-RME (T1), post-RME (T2) and final orthodontic (T3) CBCT images were included in the study. Thirteen patients had 2-banded, while 17 had 4-banded appliances. Measurements of interdental distance (ID), interdental angle (IA), buccal bone thickness (BBT) and buccal marginal bone …

Evaluation Of Apical, Coronal And Occlusal Form Diffrences With Conventional Orthodontic Treatment, Tamar Sardarian

Loma Linda University Electronic Theses, Dissertations & Projects

Introduction: Cone-beam computed tomography (CBCT) can be used to accurately identify dental landmarks in order to detect changes in dental arch forms. Purpose: The objective of this study was to determine how apical, coronal and occlusal arch forms change following orthodontic treatment with fixed appliances and to establish a base for future studies. Material and Methods: Maxillary and mandibular apical, coronal and occlusal landmarks of 27 subjects were selected on their respective CBCT images at two time points: pre-orthodontic treatment (T1) and post-orthodontic treatment (T2). Comparisons were made between the two time points to evaluate how each arch form changed …

Mechanical Evaluation Of Mandibular Defects Restored With Rhbmp-2: A Finite Element Model, Jelson Yalung

Loma Linda University Electronic Theses, Dissertations & Projects

Introduction: The utilization of recombinant human Bone Morphogenetic Protein-2 (rh- BMP2) to form new bone has been shown to be a promising alternative to autogenous bone grafts. Understanding the biomechanical properties of rhBMP-2 restored mandibular defects would provide useful knowledge in the future success of orthopedic and dental treatment in patients who have had restoration of mandibular defects with rhBMP-2. The aim of the study was to evaluate and compare the biomechanical characteristics of rhBMP-2 regenerated bone in mandibular defects using 2 different concentrations of rhBMP-2 with a given carrier in non-human primates Material and Methods: Critical-sized defects (approximately 2.5 …

Effect Of Gingival Margin Design On Retention Of Thermoformed Orthodontic Aligners, Daniel P. Cowley

UNLV Theses, Dissertations, Professional Papers, and Capstones

Purpose: The aim of this study was evaluate the effect of gingival margin design (scalloped vs. straight cut at gingival zenith vs. straight cut 2mm above gingival zenith) on the retention of thermoformed aligners. Retention of aligners is a critical requirement for efficient tooth movement.

Methods: Two thermoform aligner materials were used, Invisacryl A and Invisacryl C, in 0.040 mil (1mm) thickness. Six aligner designs were fabricated for each of the two aligner materials (12 total aligner designs). Aligner designs are scalloped, straight cut at gingival zenith (0mm), and straight cut 2mm above gingival zenith on a model with attachments. …

Influence Of Outdoor Air Quality On Maxillofacial Growth And Development, Ryan Rudd

Loma Linda University Electronic Theses, Dissertations & Projects

Introduction: Mild to moderate deviations from normal facial types can significantly change orthodontic treatment modalities. Studies linking ambient air pollution with respiratory problems, as well as craniofacial morphology with respiratory problems are well established.1-19 In this study we aimed to determine if there was a correlation between ambient air pollution and maxillofacial growth and development. We also wanted to determine if further research should be done in this area, and if so how can the study be improved. Materials and Methods: We selected Santa Maria, CA and Upland, CA as sample areas due to their significant differences in air quality. …

Three-Dimensional Force Systems Produced By Vertical V-Bends In An Arch Wire, Raja Shah

Master's Theses

No abstract provided.

The Effect Of Corticision On The Rate Of Orthodontic Tooth Movement In Rats, Hamed Vaziri

Master's Theses

Minimal treatment time is a primary goal for orthodontic therapy. Reducing treatment time decreases risk of caries, periodontal disease, root resorption, and increases patient satisfaction. Orthodontic tooth movement (OTM) is a result of bone resorption and apposition; factors influencing the rate at which these processes take place may affect OTM. Various attempts have been made to shorten treatment time. The regional acceleratory phenomenon (RAP) has been used to modify the balance between resorption and apposition of bone through selectively injuring the cortical plate of the alveolus to accelerate tooth movement. This approach is limited due to the need of flap …

Skeletal And Dental Components Of Class Ii Division 1 Correction With The Mara Compared To The Standard Edgewise Appliance, Zachary Paul Pitcher

Theses and Dissertations (ETD)

Many tools are available to correct Class II dental relationships. A functional orthopedic appliance is a popular type of Class II corrector that is thought to correct Class II dental relationships both dentally and skeletally by enhancing mandibular growth. The purpose of the study was to quantify differences in the amounts of skeletodental change based on treatment (MARA and Standard Edgewise) in Class II Division 1 patients. The sample consisted of 2 groups of Class II Division 1 patients: 51 patients treated with the MARA followed by an Edgewise appliance and another group of 51 patients treated with the Standard …

Rankl And Osteoprotegerin Levels In Response To Orthodontic Forces, Katherine Ann Hart D.D.S.

Theses and Dissertations (ETD)

Orthodontic tooth movement is mediated by interactions between PDL cells and those of the alveolus. One protein—the receptor activator nuclear factor kappa B ligand (RANKL)—is critical for osteoclastogenesis, and osteoprotegerin (OPG) is a decoy ligand that competitively inhibits RANKL. A higher RANKL/OPG ratio is associated with areas of bone resorption, while a lower ratio occurs in areas of bone deposition and homeostasis. There have been almost no clinical studies of RANKL and OPG expression in human subjects undergoing orthodontic tooth movement. The purpose of this study was to quantify changes in the levels of RANKL and of OPG expression in …

A Secular Increase In The Tempos Of Tooth Formation: 1980-2010, Kevan Michael O'Neill

Theses and Dissertations (ETD)

Introduction: Improved environments in the U.S. have resulted in taller, larger, and heavier children and adults compared to past generations. Studies of other skeletal-dental dimensions have shown increases across generations, and our perception is that teeth now are forming faster. The purpose of this study is to test for a secular trend towards faster tempos of tooth mineralization in a sample of U.S. white adolescents over the past quarter century (1980-85 to 2005-10).

Materials: Two cohorts of 200 children each were identified, each with an age range of 10-to- 15 years, one group from 1980-85 and the more recent group …

Oropharyngeal Airway Volume Following Orthodontic Treatment: Premolar Extraction Versus Non-Extraction, Thomas Patrick Shannon

Theses and Dissertations (ETD)

Orthodontic correction of tooth size versus arch size discrepancy (TSASD) can be achieved with two distinct methods of treatment. The first involves the extraction of teeth to gain the space needed for tooth alignment. The second relies on arch expansion to gain the space needed for correction. In recent decades, arguments for and against the extraction of teeth for orthodontic purposes have become increasingly important, particularly in regards to oropharyngeal airway size. Purpose: The purpose of this study is to determine whether there is a decrease in oropharyngeal dimensions following the extraction of four premolars and subsequent orthodontic therapy. Methods: …

Oropharyngeal Airway Volume Following Orthodontic Treatment: Premolar Extraction Versus Non-Extraction, Thomas Patrick Shannon

Theses and Dissertations (ETD)

Orthodontic correction of tooth size versus arch size discrepancy (TSASD) can be achieved with two distinct methods of treatment. The first involves the extraction of teeth to gain the space needed for tooth alignment. The second relies on arch expansion to gain the space needed for correction. In recent decades, arguments for and against the extraction of teeth for orthodontic purposes have become increasingly important, particularly in regards to oropharyngeal airway size. Purpose: The purpose of this study is to determine whether there is a decrease in oropharyngeal dimensions following the extraction of four premolars and subsequent orthodontic therapy. Methods: …

Comparison Of The Efficacy Of Various Ibuprofen And Acetaminophen Regimens On The Treatment Of Post-Endodontic Pain, Erik Deyoung

Master's Theses (2009 -)

The purpose of this study was to determine the efficacy of taking ibuprofen and acetaminophen at the same time versus alternating the same medications in patients with a diagnosis of symptomatic irreversible pulpitis.

Materials and Methods: Ten patients who presented for root canal therapy with a diagnosis of symptomatic irreversible pulpitis were included in this study. The patients were randomly assigned to 2 groups. Following root canal therapy, the patients in group A were instructed to take ibuprofen 600 mg and acetaminophen 1000 mg every six hours. Patients in group B were instructed to take ibuprofen 600 mg, wait three …

Fluoride Release, Recharge, And Re-Release From Four Orthodontic Bonding Systems, Amy Bouvier

Student Theses, Dissertations and Capstones

A thesis submitted to the College of Dental Medicine of Nova Southeastern University of the degree of Master of Science in Dentistry.

Objectives: To determine the amount of initial fluoride release from four orthodontic bonding systems over a period of four weeks, and then to subject these materials to an external source of fluoride for recharge in order to measure the amount of fluoride re-release over another four-week interval. Additionally the surface morphology of these materials was analyzed under the scanning electron microscope in order to identify microscopic changes in the materials that may have occurred during the experiment. Methods: …

New High Intensity Light-Emitting Diode (Led) Curing Lights: An In Vitro Evaluation Of Increased Power Density At Reduced Curing Times, Jeff Mirrielees

MUSC Theses and Dissertations

Introduction: The purpose of this study was to evaluate two new light-emitting diode (LED) curing lights with increased power densities at reduced curing times. Methods: Ninety extracted bovine incisors were examined in vitro. The incisors were divided into six test groups and metallic adhesive pre-coated brackets were bonded using either the Valo Otho (Opal Orthodontics, Ultradent) @ 3200 mW/ cm 2 or the Ortholux Luminous {3M Unitek)@ 1600 mW/ cm 2 at curing intervals of 3-, 6-, or 12-seconds. The samples were stored for 24 hours in 37 degree Celsius water and debonded. Brackets were tested using an MTS Mini-Bionix …