Operations Research, Systems Engineering and Industrial Engineering Commons^™

Quantitative Analysis Of Retrieved Glenoid Liners, Katelyn Childs, Lynn Crosby, Tarun Goswami

Biomedical, Industrial & Human Factors Engineering Faculty Publications

Revision of orthopedic surgeries is often expensive and involves higher risk from complications. Since most total joint replacement devices use a polyethylene bearing, which serves as a weak link, the assessment of damage to the liner due to in vivo exposure is very important. The failures often are due to excessive polyethylene wear. The glenoid liners are complex and hemispherical in shape and present challenges while assessing the damage. Therefore, the study on the analysis of glenoid liners retrieved from revision surgery may lend insight into common wear patterns and improve future product designs. The purpose of this pilot study …

A Five-Year Performance Review Of Field-Scale, Slow-Release Permanganate Candles With Recommendations For Second-Generation Improvements, Mark Christenson, Ann Kambhu, James Reece, Steve D. Comfort, Laurie Brunner

Nebraska Water Center: Faculty Publications

In 2009, we identified a TCE plume at an abandoned landfill that was located in a low permeable siltyclay aquifer. To treat the TCE, we manufactured slow-release potassium permanganate cylinders (oxidant candles) that had diameters of either 5.1 or 7.6 cm and were 91.4 cm long. In 2010, we compared two methods of candle installation by inserting equal masses of the oxidant candles (7.6-cm vs 5.1-cm dia). The 5.1-cm dia candles were inserted with direct-push rods while the 7.6-cm candles were housed in screens and lowered into 10 permanent wells. Since installation, the 7.6-cm oxidant candles have been refurbished approximately …

Long-Term Velaglucerase Alfa Treatment In Children With Gaucher Disease Type 1 Naïve To Enzyme Replacement Therapy Or Previously Treated With Imiglucerase, Laurie Smith, William Rhead, Joel Charrow, Suma P. Shankar, Ashish Bavdekar, Nicola Longo, Rebecca Mardach, Paul Harmatz, Thomas N. Hangartner, Hak-Myung Lee, Eric Crombez, Gregory M. Pastores

Biomedical, Industrial & Human Factors Engineering Faculty Publications

Background

Gaucher Disease type 1 (GD1) often manifests in childhood. Early treatment with enzyme replacement therapy (ERT) may prevent disease complications. We report the assessment of velaglucerase alfa ERT in pediatric GD1 patients who participated in a long-term extension study (HGT-GCB-044, ClinicalTrials.gov Identifier NCT00635427).

Methods

Safety and efficacy were evaluated in pediatric patients receiving velaglucerase alfa 30–60 U/kg by intravenous infusion every other week. In addition to key hematological and visceral efficacy assessments, exploratory assessments conducted specifically in pediatric patients included evaluation of height, bone age, bone marrow burden, and Tanner stage of puberty.

Results

The study included 24 …

Hsr: L 1/2-Regularized Sparse Representation For Fast Face Recognition Using Hierarchical Feature Selection, Bo Han, Bo He, Tingting Sun, Tianhong Yan, Mengmeng Ma, Yue Shen, Amaury Lendasse

Engineering Management and Systems Engineering Faculty Research & Creative Works

In This Paper, We Propose a Novel Method for Fast Face Recognition Called L1/2-Regularized Sparse Representation using Hierarchical Feature Selection. by Employing Hierarchical Feature Selection, We Can Compress the Scale and Dimension of Global Dictionary, Which Directly Contributes to the Decrease of Computational Cost in Sparse Representation that Our Approach is Strongly Rooted In. It Consists of Gabor Wavelets and Extreme Learning Machine Auto-Encoder (Elm-Ae) Hierarchically. for Gabor Wavelets' Part, Local Features Can Be Extracted at Multiple Scales and Orientations to Form Gabor-Feature-Based Image, Which in Turn Improves the Recognition Rate. Besides, in the Presence of Occluded Face Image, the …

Shortest Path Based Decision Making Using Probabilistic Inference, Akshat Kumar

Research Collection School Of Computing and Information Systems

We present a new perspective on the classical shortest path routing (SPR) problem in graphs. We show that the SPR problem can be recast to that of probabilistic inference in a mixture of simple Bayesian networks. Maximizing the likelihood in this mixture becomes equivalent to solving the SPR problem. We develop the well known Expectation-Maximization (EM) algorithm for the SPR problem that maximizes the likelihood, and show that it does not get stuck in a locally optimal solution. Using the same probabilistic framework, we then address an NP-Hard network design problem where the goal is to repair a network of …

Life Cycle Assessment And Optimization-Based Decision Analysis Of Construction Waste Recycling For A Leed-Certified University Building, Murat Kucukvar, Gokhan Egilmez, Omer Tatari

Mechanical and Industrial Engineering Faculty Publications

The current waste management literature lacks a comprehensive LCA of the recycling of construction materials that considers both process and supply chain-related impacts as a whole. Furthermore, an optimization-based decision support framework has not been also addressed in any work, which provides a quantifiable understanding about the potential savings and implications associated with recycling of construction materials from a life cycle perspective. The aim of this research is to present a multi-criteria optimization model, which is developed to propose economically-sound and environmentally-benign construction waste management strategies for a LEED-certified university building. First, an economic input-output-based hybrid life cycle assessment model …

Exploratory Study Of The Adoption And Use Of The Smartphone Technology In Emerging Regions: Case Of Saudi Arabia, Fahad Abdulaziz Aldhaban

Dissertations and Theses

Users' acceptance of a new information technology (IT) is considered to be a key determinant factor of its success. Also, studying users' adoption and use of new IT plays an important role in determining users' needs and reducing business risk, especially in industry segments with rapid changes in IT such as Smartphone technology. Such rapid evolution is influencing consumers' behaviors, their daily lifestyle, the manner of conducting their activities and their ways of consuming and using information.

Smartphone technology holds a promising future with an expected global market that could reach US $258 billion by the end of year 2015 …

Auto-Detection Of Anisakid Larvae In Cod Fillets By Uv Fluorescent Imaging With Os-Elm, Wenqiang Cai, Limin Cao, Hong Lin, Jianxin Sui, Rui Nian, Jidong Hu, Amaury Lendasse

Engineering Management and Systems Engineering Faculty Research & Creative Works

In This Paper, One Auto-Detection Scheme of Anisakid Larvae in Cod Fillets is Developed on the Basis of Online Sequential Extreme Learning Machine (OS-ELM) in a Single Hidden Layer Feedforward Neural Networks (SLFN). One Uv Fluorescent Imaging System is First Set Up to Collect and Extract the Typical Image Patches with and Without Anisakid Larvae Inside the Fish Muscles, the Uv Fluorescent Image Patches Are Then Fed into SLFN Sequentially to Learn How to Nondestructively Identify the Parasites in Real-Time, particularly for a Growing Size of the Training Set with New Observations Arrived Again and Again. It Has Been Shown …

The Pneumatic Leg Extension, David G. Sedano

All Undergraduate Projects

In recent years, reaching altitudes that are higher than your normal-height has evolved from pure amusement to an “in-demand” necessity out in the field. Means of achieving greater than normal height range from wooden poles to aluminum stilts. The era of ladders and other extension methods are slowly fading away. There are many designs in the market that focus on different factors to make a stilt. As other designs focus on one or two enhancements, the pneumatic leg extension’s objective is to improve all aspects of the stilt. This radical new design differs greatly from traditional stilt designs. The pneumatic …

Using Casual Loop Diagramming To Explore The Drivers Of The Sustained Functionality Of Rural Water Services In Timor-Leste, Kate Neely, Jeffrey P. Walters

Faculty Publications - Biomedical, Mechanical, and Civil Engineering

It is recognized that international water sector development work has issues with a lack of sustained positive outcomes. A large driver of this outcome is how NGOs work with communities to implement and then manage water services. Many NGOs tend to focus their efforts on improving their reach and organisational growth by continually engaging in new projects. This behaviour is largely driven by short-term donor funding models that reward extended coverage, leaving little focus on sustained outcomes. Similarly, community-based management (CBM) schemes often impede sustained services as a result of the community’s limited capacity to operate and maintain the technology. …

Changing States Of Multistage Process Chains, Thorsten Wuest, Christopher Irgens, Klaus-Dieter Thoben

Faculty & Staff Scholarship

Generally, a process describes a change of state of some kind (state transformation). This state change occurs from an initial state to a concluding state. Here, the authors take a step back and take a holistic look at generic processes and process sequences from a state perspective. The novel perspective this concept introduces is that the processes and their parameters are not the priority; they are rather included in the analysis by implication. A supervised machine learning based feature ranking method is used to identify and rank relevant state characteristics and thereby the processes’ inter- and intrarelationships. This is elaborated …

Exploring Agricultural Production Systems And Their Fundamental Components With System Dynamics Modelling, Jeffrey P. Walters, David W. Archer, Gretchen F. Sassenrath, John R. Hendrickson, Jon D. Hanson, John M. Halloran, Peter Vadas, Vladimir J. Alarcon

Faculty Publications - Biomedical, Mechanical, and Civil Engineering

Agricultural production in the United States is undergoing marked changes due to rapid shifts in consumer demands, input costs, and concerns for food safety and environmental impact. Agricultural production systems are comprised of multidimensional components and drivers that interact in complex ways to influence production sustainability. In a mixed-methods approach, we combine qualitative and quantitative data to develop and simulate a system dynamics model that explores the systemic interaction of these drivers on the economic, environmental and social sustainability of agricultural production. We then use this model to evaluate the role of each driver in determining the differences in sustainability …

Risk Attitudes And Global Infrastructure Technology Choices, Jessica Kaminsky, Jeffrey P. Walters

Faculty Publications - Biomedical, Mechanical, and Civil Engineering

Past research shows that Hofstede’s cultural dimension of uncertainty avoidance explains variance in nations’ technology choice for sanitation and electricity infrastructure construction. The uncertainty avoidance dimension describes the way that nations deal with ambiguity and uncertainty. This paper is part of a larger project that links that previous national scale research to the project level that is most relevant to the construction practice. As such, this paper reviews methods from the literature that measure individual risk attitudes, including issues of measurement and risk determinants. For example, this paper discusses paid real-stakes lotteries, general risk questions, and context specific risk questions. …

Knowledge Reuse Through Electronic Knowledge Repositories: An Empirical Study And Ontological Improvement Effort For The Manufacturing Industry, Peter Panha Chhim

Wayne State University Dissertations

Knowledge management adoption is growing, and will continue to grow in no small part because of its recent inclusion into the ISO 9001 quality standard. As organizations look towards ways in which to manage their knowledge, the codification of explicit knowledge through Knowledge Management Systems (KMS) and Electronic Knowledge Repositories (EKRs) will undoubtedly gain more interest.

An EKR is a form of KMS that emphasizes the codification and storage of organizational expertise for the purposes of Knowledge Reuse (KRU). Unfortunately, the factors surrounding KRU are not well understood. While previous studies have viewed EKR usage from a narrow perspective, a …

Perceptions Of The Advanced Manufacturing Competency Model (Amcm) For Curriculum Development, Mark Doggett, Muhammad Jahan

SEAS Faculty Publications

The Advanced Manufacturing Competency Model (AMCM) model emphasizes building of competencies at all levels ranging from the shop floor production worker to manufacturing engineers. It consists of different levels of competencies organized hierarchically. The levels are personal effectiveness, academic, workplace, industry-wide technical, industry-sector technical, management and organization-specific competencies.

This paper discusses survey research on the perceptions of manufacturing students, faculty, and industry advisory board members regarding the AMCM. The research evaluated the manufacturing program based on perceptions of the AMCM competencies and the curricular coverage required for entry-level manufacturing professionals. Specifically, the survey sought to answer the following research questions: …

Group Scheduling In A Cellular Manufacturing Shop To Minimise Total Tardiness And Nt: A Comparative Genetic Algorithm And Mathematical Modelling Approach, Gokhan Egilmez, Emre M. Mese, Bulent Erenay, Gürsel A. Süer

Mechanical and Industrial Engineering Faculty Publications

In this paper, family and job scheduling in a cellular manufacturing shop is addressed where jobs have individual due dates. The objectives are to minimise total tardiness and the number of tardy jobs. Family splitting among cells is allowed but job splitting is not. Two optimisation methods are employed in order to solve this problem, namely mathematical modelling (MM) and genetic algorithm (GA). The results showed that GA found the optimal solution for most of the problems with high frequency. Furthermore, the proposed GA is efficient compared to the MM especially for larger problems in terms of execution times. Other …

A Simulation-Based Evaluation Of Efficiency Strategies For A Primary Care Clinic With Unscheduled Visits, Afrifah Bobbie

Electronic Theses and Dissertations

In the health care industry, there are strategies to remove inefficiencies from the health delivery process called efficiency strategies. This dissertation proposed a simulation model to evaluate the impact of the efficiency strategies on a primary care clinic with unscheduled "walk-in" patient visits. The simulation model captures the complex characteristics of the Orlando Veteran's Affairs Medical Center (VAMC) primary care clinic. This clinic system includes different types of patients, patient paths, and multiple resources that serve them. Added to the problem complexity is the presence of patient no-shows characteristics and unscheduled patient arrivals, a problem which has been until recently, …

A Systems Approach To Assessing, Interpreting And Applying Human Error Mishap Data To Mitigate Risk Of Future Incidents In A Space Exploration Ground Processing Operations Environment, Tiffaney Alexander

Electronic Theses and Dissertations

Research results have shown that more than half of aviation, aerospace and aeronautics mishaps/incidents are attributed to human error. Although many existing incident report systems have been beneficial for identifying engineering failures, most of them are not designed around a theoretical framework of human error, thus failing to address core issues and causes of the mishaps. Therefore, it is imperative to develop a human error assessment framework to identify these causes. This research focused on identifying causes of human error and leading contributors to historical Launch Vehicle Ground Processing Operations mishaps based on past mishaps, near mishaps, and close calls. …

Computational Modeling Approaches For Task Analysis In Robotic-Assisted Surgery, Mahtab Jahanbani Fard

Wayne State University Dissertations

Surgery is continuously subject to technological innovations including the introduction of robotic surgical devices. The ultimate goal is to program the surgical robot to perform certain difficult or complex surgical tasks in an autonomous manner. The feasibility of current robotic surgery systems to record quantitative motion and video data motivates developing descriptive mathematical models to recognize, classify and analyze surgical tasks. Recent advances in machine learning research for uncovering concealed patterns in huge data sets, like kinematic and video data, offer a possibility to better understand surgical procedures from a system point of view. This dissertation focuses on bridging the …

Technology Decisions In New Product Development, Amir Sanayei

Wayne State University Dissertations

Selecting the right technology is one of the most important and challenging decisions in new product development (NPD) process that can greatly affect all downstream design activities which have a great impact on product success in the market place. Although new technologies may bring more competitive advantage by offering higher performance to price, they also make the NPD process more risky and challenging. We model the technology selection problem of a firm that is defining its new product in the presence of the technology uncertainty. At each review stage, firm has the options: select and commit to any technology alternatives …

Complex Adaptive Behavior: Pragmatic Idealism, Mustafa Canan, Andres Sousa-Poza

Engineering Management & Systems Engineering Faculty Publications

The introduction of new concepts is a driver of organizational evolution and transformation. A newly introduced concept can introduce new meaning that is disparate to existing understanding. A new concept may also be interpreted in multiple ways, thereby introducing several disparate meanings. The disparity is resolved through adaptation. The disparity introduces complex adaptive behavior to the organization, requiring suitable changes to its management and design. The development of corresponding doctrine for new concepts, and training for the organization's constituents become indispensable. In so doing, constituents can be involved in the adaptation process through direct participation, and thereby include the cognitive …

Modeling Social, Economic, Technical & Environmental Components In An Energy System, Ange-Lionel Toba, Mamadou Seck

Engineering Management & Systems Engineering Faculty Publications

Energy system models have become the main supporting tool for energy policy. Modern challenges in energy policy require energy systems models that integrate technical, environmental and societal aspects of the energy systems. In this paper, we introduce a conceptual model for an energy system model that specifies the relationships between social, technical, environmental, and economic aspects of an energy system. This conceptual model presented in the IDEF0 language will serve as a basis for a computational energy systems model. © 2016 The Authors.

Energy Sustainability Of Turkey In The Case Of Lng, Omer Ilker Poyraz, Omer Keskin, Resit Unal

Engineering Management & Systems Engineering Faculty Publications

Energy is both vital and strategic element for a nation to sustain its fundamental activities like security, logistics, heating, etc. Countries sustain their energy demands through internal or external sources. In the case of not being able to maintain energy demands from their internal sources, they would need to import their requirements. Whenever they need to buy raw materials, they have to build terminals to process the raw material into the required form. The dependency on the imports may cause the importing country to weaken its advantage in international conflicts, unemployment, and welfare. Therefore, countries aim to mitigate dependence to …

The Effect Of Impeded Information Sharing And Transparency On Power Differentials And Organizational Dysfunction, Mustafa Canan, A. Sousa-Poza

Engineering Management & Systems Engineering Faculty Publications

The constituents of an organization have to interact with each other. The purpose of the interaction is to maintain flow of information, to exchange knowledge, to share individual situational awareness, and to give rise to an organizational shared awareness. The rate of information exchange is constrained by multiple factors and impacts the effectiveness of the communication in an organization. For instance, extensive communication may not result in informativeness all the time. Communication channels induce constraints between the interacting agents. These constraints can impede information flow. Impeding information flow will result in an accumulation of knowledge with a particular agent. Consequently, …

Parametric Investigations Into Internal Surface Modification Of Brass Tubes With Alternating Magnetic Field, Harish Kumar, Sehijpal Singh, Anil K. Srivastava

Manufacturing & Industrial Engineering Faculty Publications

The final finish operations have great significance in an overall manufacturing cycle of a product. The surface finishing and modification of surfaces have been the vital requirements of most of the products. The processes like shot peening, shot blasting, abrasive finishing and super finishing are being largely employed for such requirements. While final finishing of flat and outside surfaces are relatively easy and well established, the internal surfaces such as those of pipes is not so simple. In this paper, the application of low frequency alternative magnetic field has been explored for imparting surface modification including surface on the internal …

A Framework To Generate A Smart Manufacturing System Configurations Using Agents And Optimization, Khalid Nagadi

Electronic Theses and Dissertations

Manufacturing is a crucial element in the global economy. During the last decade, the national manufacturing sector loses nearly 30% of its workforce and investments. Consequently, the quality of the domestic goods, global share, and manufacturing capabilities has been declined. Therefore, innovative ways to optimize the usage of the Smart Manufacturing Systems (SMS) are required to form a new manufacturing era. This research is presenting a framework to optimize the design of SMS. This includes the determination of the suitable machines that can perform the job efficiently, the quantity of those machines, and the potential messaging system required for sharing …

A Hybrid Simulation Framework Of Consumer-To-Consumer Ecommerce Space, Oloruntomi Joledo

Electronic Theses and Dissertations

In the past decade, ecommerce transformed the business models of many organizations. Information Technology leveled the playing field for new participants, who were capable of causing disruptive changes in every industry. "Web 2.0" or "Social Web" further redefined ways users enlist for services. It is now easy to be influenced to make choices of services based on recommendations of friends and popularity amongst peers. This research proposes a simulation framework to investigate how actions of stakeholders at this level of complexity affect system performance as well as the dynamics that exist between different models using concepts from the fields of …

An Efficient Solution To The Mixed Shop Scheduling Problem Using A Modified Genetic Algorithm, V. Nguyen, H. P. Bao

Mechanical & Aerospace Engineering Faculty Publications

The mixed job shop scheduling problem is one in which some jobs have fixed machine orders and other jobs may be processed in arbitrary orders. In past literature, optimal solutions have been proposed based on adaptations of classical solutions such as by Johnson, Thompson and Giffler among many others, by pseudopolynomial algorithms, by simulation, and by Genetic Algorithms (GA). GA based solutions have been proposed for flexible Job shops. This paper proposes a GA algorithm for the mixed job shop scheduling problem. The paper starts with an analysis of the characteristics of the so-called mixed shop problem. Based on those …

An Integrated Design For Six Sigma-Based Framework To Align Strategy, New Process Development, And Customer Requirements In The Airlines Industry, Mohammed Alghamdi

Electronic Theses and Dissertations

When organizations create new strategy maps, key new processes are often identified. This is important for organizations to stay competitive in the global marketplace. This document describes the development, implementation, and validation of a framework that properly aligns and links an organization's strategy and new process development. The proposed framework integrates the Balanced Scorecard management system (BSC) and the Design for Six Sigma (DFSS) methodology, leveraging their strengths, overcoming weaknesses, and identifying lessons learned to help bridge the gap between strategy development and execution. The critical-to-quality conceptual model is used as an integrative component for the framework. Literature search has …

An Experimental Investigation Of The State Of Creativity, Critical Thinking And Creativity Training In Undergraduate Engineering Students, Eric Sola

Electronic Theses and Dissertations

This research explores creativity and critical thinking skills in undergraduate engineering students. The study undertook two experiments in order to gather a better understanding of several factors regarding the interactions between students' creative abilities and the effects of the undergraduate engineering curriculum. Experiment 1 focused on the differences in creative and critical thinking skills in freshman versus senior undergraduate engineering students. Experiment 2 centered on the variation in the effects of long-term versus short-term creativity training on senior engineering students. Creative skill was measured using the Test for Creative Thinking – Drawing Production (TCT-DP) developed by Urban and Jellen (2010). …