Operations Research, Systems Engineering and Industrial Engineering Commons^™

A Framework For Executable Systems Modeling, Matthew Amissah

Engineering Management & Systems Engineering Theses & Dissertations

Systems Modeling Language (SysML), like its parent language, the Unified Modeling Language (UML), consists of a number of independently derived model languages (i.e. state charts, activity models etc.) which have been co-opted into a single modeling framework. This, together with the lack of an overarching meta-model that supports uniform semantics across the various diagram types, has resulted in a large unwieldy and informal language schema. Additionally, SysML does not offer a built in framework for managing time and the scheduling of time based events in a simulation.

In response to these challenges, a number of auxiliary standards have been offered …

Tooling For Injection Molding Using Laser-Powder Bed Fusion., Mohith Ram Buxani

Electronic Theses and Dissertations

Laser-Powder Bed Fusion (L-PBF) has been considered for some time by the injection molding industry for the fabrication of tooling for injection molding in order to address large lead times and costs for tool-making. Computer-aided simulations are also routinely used to evaluate new part and mold designs as well as understanding the effects of material compositions and processing conditions on part quality and overall productivity. However, there remains a significant need to integrate the perspectives from injection molding, 3D printing, metal powders, and component design and process simulation to better utilize LPBF for fabricating tooling required for injection molding. The …

Computational Fluid Dynamics Modeling And In Situ Physics-Based Monitoring Of Aerosol Jet Printing Toward Functional Assurance Of Additively-Manufactured, Flexible And Hybrid Electronics, Roozbeh (Ross) Salary

Graduate Dissertations and Theses

Aerosol jet printing (AJP)—a direct-write, additive manufacturing technique—has emerged as the process of choice particularly for the fabrication of flexible and hybrid electronics. AJP has paved the way for high-resolution device fabrication with high placement accuracy, edge definition, and adhesion. In addition, AJP accommodates a broad range of ink viscosity, and allows for printing on non-planer surfaces. Despite the unique advantages and host of strategic applications, AJP is a highly unstable and complex process, prone to gradual drifts in machine behavior and deposited material. Hence, real-time monitoring and control of AJP process is a burgeoning need. In pursuit of this …

Assessing The Tensile And Fatigue Behavior Of Aerosol Jet Printed Nano Silver Particle Traces On Polyimide Substrates, Roshan Muralidharan

Graduate Dissertations and Theses

Flexible interconnects are integral to flexible hybrid electronics. Aerosol jet, inkjet or screen printing offer various advantages and disadvantages compared to electroplating, but the behavior of printed metal traces under various types of loading is very different and not yet well understood. This thesis presents an assessment of the electromechanical behavior of aerosol jet printed Nano silver particles on two common polyimide substrates, Upilex and Kapton.

There are many different aspects to electromechanical testing of flexible interconnects, but this work focuses on the effects of tension and cyclic loading. In comparison to the much more widely researched electroplated copper or …

Throughput And Yield Improvement For A Continuous Discrete-Product Manufacturing System, Md Shahriar J. Hossain

LSU Doctoral Dissertations

A seam-welded steel pipe manufacturing process has mainly four distinct major design and/or operational problems dealing with buffer inventory, cutting tools, pipe sizing and inspection-rework facility. The general objective of this research is to optimally solve these four important problems to improve the throughput and yield of the system at a minimum cost.

The first problem of this research finds the optimal buffer capacity of steel strip coils to minimize the maintenance and downtime related costs. The total cost function for this coil feeding system is formulated as a constrained non-linear programming (NLP) problem which is solved with a search …

Systems Engineering Analysis For Optimum Selection Protocol For Thermal Expansion Measurement Of A Carbon Fiber Reinforced Composite Tube, Ronald Uchimiya

LMU Theses and Dissertations

A material’s Coefficient of Thermal Expansion (CTE) is a valuable physical property, particularly for structural fiber reinforced composites that are routinely used in satellite/aerospace applications. Satellite space structures are routinely designed with a high degree of dimensional and thermal stability. Designing and verifying for near zero CTE performance is a common design requirement. The CTE is routinely a physical property with known values for common materials. However, the strength, stiffness and CTE properties on a multi-ply graphite fiber reinforced laminate composite can be tailored to specific engineering requirements. Because of this, a method of verification (testing) is routinely performed to …

Adopt: Combining Parameter Tuning And Adaptive Operator Ordering For Solving A Class Of Orienteering Problems, Aldy Gunawan, Hoong Chuin Lau, Kun Lu

Research Collection School Of Computing and Information Systems

Two fundamental challenges in local search based metaheuristics are how to determine parameter configurations and design the underlying Local Search (LS) procedure. In this paper, we propose a framework in order to handle both challenges, called ADaptive OPeraTor Ordering (ADOPT). In this paper, The ADOPT framework is applied to two metaheuristics, namely Iterated Local Search (ILS) and a hybridization of Simulated Annealing and ILS (SAILS) for solving two variants of the Orienteering Problem: the Team Dependent Orienteering Problem (TDOP) and the Team Orienteering Problem with Time Windows (TOPTW). This framework consists of two main processes. The Design of Experiment (DOE) …

A Framework And Exploration Of A Cybersecurity Education Escape Room, Justin Charles Snyder

Theses and Dissertations

This thesis presents a review of educational-escape-room literature followed by a design-oriented framework (the Snyder Escape Room Framework or SERF) and demonstrates the potential efficacy of escape-rooms in cybersecurity education. Several authors have proposed frameworks and guidelines for game and educational design regarding escape rooms. This work coalesces some of those ideas into a more substantial and comprehensive framework (SERF) that designers can use when developing educational escape rooms. The Snyder Escape Room Framework provides heuristics for goals and objectives, players, activities, context, trajectory design, and evaluation. Additionally, this work describes and analyzes the novel prototyped BYU GCC escape room …

Robust Assignment Of Customer Orders With Uncertain Configurations In A Production Network For Aircraft Manufacturing, Jens Buergin, Philippe Blaettchen, Juri Kronenbitter, Katharina Molzahn, Yannick Schweizer, Caroline Strunz, Manuel Almagro, Frank Bitte, Stephan Ruehr, Marcello Urgo, Gisela Lanza

Research Collection Lee Kong Chian School Of Business

Production of multi-variant products in a network requires the assignment of customer orders to locations and periods. This is a highly complex planning task, as requirements of procurement, production, distribution, and sales have to be considered. Providing customers with the flexibility of configuring their ordered products after order assignment further increases the complexity of the planning task by taking uncertainty into account. Therefore, a robust optimisation model, using scenarios representing potential customer-specific order configurations, is introduced. By providing enough flexibility to handle maximum work overload caused by the potential order configurations at locations, a robust assignment of orders can be …

A Web Page Classifier Library Based On Random Image Content Analysis Using Deep Learning, Leonardo Espinosa Leal, Amaury Lendasse, Kaj Mikael Björk, Anton Akusok

Engineering Management and Systems Engineering Faculty Research & Creative Works

In This Paper We Present a Methodology and the Corresponding Python Library1 for the Classification of Webpages. the Method Retrieves a Fixed Number of Images from a Given Webpage, and based on Them Classifies the Webpage into a Set of Established Classes with a Given Probability. the Library Trains a Random Forest Model Built Upon the Features Extracted from Images by a Pre-Trained Neural Network. the Implementation is Tested by Recognizing Weapon Class Webpages in a Curated List of 3859 Websites. the Results Show that the Best Method of Classifying a Webpage among the Classes of Interest is to Assign …

A Project-Based Learning Approach In Teaching Simulation To Undergraduate And Graduate Students, Gokhan Egilmez, Dusan Sormaz, Ridvan Gedik

Engineering and Applied Science Education Faculty Publications

In this study, application of experiential learning into graduate and undergraduate curricula of a industrial system simulation course is presented. Simulation has been among the courses against which students feel uncomfortable or frightened due to heavy software use, prerequisite of probability, and statistics knowledge, and its application requirements. To minimize this fear and improve student’s understanding about the subject matters and have them develop ample skills to build complex models, a project-based learning approach is proposed and used in undergraduate and graduate teaching settings. To achieve the project-based learning goals, a 15-week curriculum is designed to have a balanced lecture …

4-D Printing Of Pressure Sensors And Energy Harvesting Devices For Engineering Education, Tzu-Liang Bill Tseng, Aditya Akundi, Hoejin Kim

Manufacturing & Industrial Engineering Faculty Publications

This paper elaborates on the development of laboratory project modules in the Industrial manufacturing and systems engineering department at The University of Texas El Paso based on Four-Dimensional (4D) printing technology. These modules are aimed at introducing the students to interdisciplinary manufacturing and emerging dimensions in manufacturing technology. 4D printing is a new dimension in additive manufacturing wherein, the 3D printed structures react to the change of parameters within the environment such as temperature, and humidity, resulting in shape change or in functionality such as electricity output, and self-healing. Recently 4D printing of simple devices for pressure sensors application were …

Combination Forecasting Of Stock Index Time Series Based On Cooperative Game Theory, Luo Wei

Journal of System Simulation

Abstract: In view of the characteristics of nonlinear, large amplitude, frequent fluctuations in China's stock market, a prediction method of intelligent composite stock index time series based on the cooperative game is presented. The prediction model of stock index time series is established by using neural network method based on the correlations among the various economic indicators, and the development trend and laws of stock index time series are established by using the improved ARIMA method. The two methods are combined by importing cooperative game method. Simulation results show that the prediction accuracy of the presented method is controlled …

Real-Time Simulator For Spatial Information Networks Based On Analog If Signal Processing, Zeguo Yang, Ma Shang, Diaopeng Huang, Jianhao Hu, Lixiang Liu

Journal of System Simulation

Abstract: To solve the problem of real-time simulation of spatial information network with high dynamic network topology, a real-time simulator based on the IF signal processing is proposed. Compared with traditional channel simulator, it supports both the channel transmission characteristics like channel fading, Doppler shift, noise, and path delay, and the real-time simulation of dynamic network topology changes. The simulator supports 8~128 70 MHz IF (0~20 MHz signal bandwidth) emulated nodes with flexible link type configuration. The maximal fading depth is 100 dB, the maximal Doppler shift is 2 MHz, and the maximal path delay can reach up …

A Lightweight Modeling And Simulation Technical Framework For Complex Systems, Ji Hang, Junhua Zhou, Guoqiang Shi, Tingyu Lin, Junjie Xue

Journal of System Simulation

Abstract: Aiming at the modeling and simulation verification of complex systems, the paper established a lightweight simulation technical framework and a system building method. The simulation technical framework is built based on distributed network communication middleware and has graphic user interface, simulation management and run control modules, it packages effective and lightweight network middleware, object management, event management and time management and it is capable of interoperability and its members have abilities of reusable and combinable. The results show that the framework can supports flexible construction and effective simulation on complex systems.

Temperature Characteristics Of Contact Wire Under Different Driving Intervals, Hongwei Wang, Zhang Kai, Zhiyong Wang, Fengyi Guo, Liu Shuai, Zhang Qiong

Journal of System Simulation

Abstract: To reduce the wear of pantograph and catenary system while decreasing the headway, the temperature field of the contact wire is studied. A simulation model is established by using the COMSOL Multiphysics software. The effectiveness of the model is verified with temperature experiments. Temperature field of the contact wire of freight locomotive and passenger locomotive in different intervals is studied by simulation. The smaller the headway of trains, the higher the temperature value, and the shorter the balance process. Under the constraint of temperature field, the headway of freight locomotive couldn't be less than 180s under long term operation. …

Analysis And Simulation Of Temperature Control For Battery Pole Piece Electromagnetic Heating Roller, Jing Ran, Feng Hua, Yonggeng Wang, Haiping Song, Yanjun Xiao

Journal of System Simulation

Abstract: With the application of electromagnetic heating roller on battery pole piece rolling,the processing technology, quality and efficiency of the battery pole piece are improved. The special heating technology of electromagnetic heating roller which involves multi-physics coupling in the process of conversion makes it difficult to control the heating process and determine the control index. By studying the electromagnetic heating theory, the mathematical model of electromagnetic heating roller is established and the simulation and analysis of the electromagnetic heating roller using MATLAB software and the finite difference method are carried out. The distribution, change rule and influence factors of the …

Modeling & Simulation Technology In Manufacturing, Zhang Lin, Longfei Zhou

Journal of System Simulation

Abstract: With the continuous deepening of the application of information technology in the manufacturing field, the informatization of manufacturing systems is developing from unit digital manufacturing to integration networked manufacturing, and then to the comprehensive digital, networked and intelligent manufacturing. As a comprehensive information technology integrating computer, model theory, and scientific computing, modeling & simulation technology plays an irreplaceable role during the development of manufacturing informatization and is widely applied in all phases of the whole product lifecycle, such as design, manufacturing, testing, maintenance, purchase, sales and other phase. This paper reviews and summarizes the research and application of modeling …

Research On Maturity Evaluation Technology Of Complex Digital Industrial System, Geng Chao, Shiyou Qu, Tingyu Lin, Guoqiang Shi, Yingying Xiao, Wang Mei, Qiudan Ma, Ji Hang

Journal of System Simulation

Abstract: Under the background of a new round of the innovation of science and technology and the revolution of industry, the complex digital industrial system is constantly innovating and shaping. Firstly, the paper established maturity evaluation model of the complex digital industrial system based on system engineering. Then, the paper proposed multi - index maturity analysis method and multi - enterprise maturity synthesis method of the complex digital industrial system. Combined with the digital industrial system of aerospace complex product, an evaluation example is presented. The results show that the maturity evaluation method can be used to standardize and guide …

Identification Of Closed Loop Projection Subspace For Motor Based On Hankel Correlation Function, Minghong She

Journal of System Simulation

Abstract: To solve estimation deviation problem of model parameter in the closed-loop system identification, the subspace identification model and state space model based on the estimation of the correlation function are presented, and through the correlation function estimation and zero space followed by projection, the block Hankel matrix of identification framework was filled so as to obtain the scope of the extended observability matrix; on the basis of the same projection on the time offset set of related data, the RQ decomposition of the projection is calculated by numerical calculation, and the dynamic estimation of the system model is obtained. …

High Frequency Blend Clips Matching Based Fire Sound Synthesis, Yin Qiang, Shiguang Liu

Journal of System Simulation

Abstract: Aimed at the problem which generated by fire sound simulation in virtual reality field, a new fire sound synthesis method was proposed. Most of the sound synthesis methods currently separate the fire sound into low and high frequencies for synthesizing. The influence of low frequency fire sound models was considered and the low frequency signal was synthesized based on the physical visual fire model data. The high frequency sound signal was synthesized based on high frequency blend clips matching method. According to the characteristics of the fire's high frequency, the different frequency bands of high noise signal …

Clustering Method Based On Graph Data Model And Reliability Detection, Yanyun Cheng, Huisong Bian, Changsheng Bian

Journal of System Simulation

Abstract: For the data in feature space, traditional clustering algorithm can take clustering analysis directly. High-dimensional spatial data cannot achieve intuitive and effective graphical visualization of clustering results in 2D plane. Graph data can clearly reflect the similarity relationship between objects. According to the distance of the data objects, the feature space data are modeled as graph data by iteration. Cluster analysis based on modularity is carried out on the modeling graph data. The two-dimensional visualization of non-spherical-shape distribution data cluster and result is achieved. The concept of credibility of the clustering result is proposed, and a method is proposed, …

Aerodynamic Simulation Of Multi-Dof Flapping-Wing Air Vehicle Of Bird-Like Based On Xflow Software, Yonggang Yang, Hanping Su

Journal of System Simulation

Abstract: The aerodynamic characteristics analysis of flapping-wing is of great significance to the design, manufacturing and control of the aircraft. In this paper, a simple motion model of multiple-Degrees-of- Freedom (multi-DOF) of “swing-torsion-bending and folding” is established by analyzing the flight characteristics of bird-like flapping wing. The flapping-wing air vehicle of multi-DOF is numerically simulated in the case of unsteady flow at low Reynolds number by XFlow software. The effects of flapping wing shape, frequency and inflow on surrounding air are analyzed. The simulation results provide theory and technique supports for the flapping-wing air vehicle'research and development.

Simulation Analysis Of Magnetic Field Effect In Induction Heating Coil Of Porous Silicon Core Furnace, Jingang Li, Gaoyuan Liu

Journal of System Simulation

Abstract: A new technology of porous coil disposable drawing a plurality of single crystal silicon rod can solve the problem of low efficiency and high cost of zone melting method of single induction heating coil in drawing monocrystalline silicon. However,the missing of the theoretical research and mature technology leads to different sizes of monocrystalline silicon rods. According to electromagnetic theory,Some characterisitics of the porous coil are studied,including magnetic field model,operating principle,magnetic field distribution.To prove the mechanism of the technology, a mathematical model of the porous coil is constructed based on Matlab and Ansys software. The magnetic flux density distribution …

Synthesizing Rotational Human Motion With Physical Reality, Wei Yi, Shihong Xia

Journal of System Simulation

Abstract: Both keyframes and their timings play an important role in synthesizing physically realistic human motion. However, physically plausible timings are hard to set by manual. By combing keyframes and the physics-based optimization, a new method is proposed to solve physically plausible timings of given keyframes. Firstly, the keyframes and the initial value of the timings of keyframes are set through a graphical user interface. Secondly, the physically plausible timings of keyframes are obtained by optimizing a small-size nonlinear optimization model. Finally, the rotational human motion is synthesized by the keyframes and the computed timings of keyframes. Experiments are performed …

Equipment Rul Prediction Oriented Parallel Simulation Framework, Chenglong Ge, Yuanchang Zhu, Yanqiang Di, Zhiwei Hu, Zhihua Dong

Journal of System Simulation

Abstract: As the equipment states are complicated with uncertainty, predicting remaining useful life with self-updating ability has become a hard task. Simulation provides an effective way to solve the problem. The concept and technology framework of equipment remaining useful life prediction oriented parallel simulation are proposed based on parallel system theory and the concept, characteristics, capacity demands and functional compositions of parallel simulation are introduced. The main modeling technologies of equipment remaining useful life prediction oriented parallel simulation are discussed, which include awareness of equipment degradation state, construction of equipment degradation state space model and evolution of equipment degradation state …

Matlab-Based Physical Real-Time Simulation Platform Of Pmsm In Intelligent Test System, Mengru Wang, Zhou Shan, Jinbo Wang, Panpan Xue

Journal of System Simulation

Abstract: As the physical objects cannot simulate multiple failure modes to cooperate with space controller test, a solution that establishing the real-time physics simulation platform which contains the controlled object and the control system is proposed in this paper. In this solution, we established permanent magnet synchronous motor vector control model using MATLAB /Simulink toolbox of System Generator, then implemented on FPGA; After hardware extension, a complete closed-loop test system is constructed with the DUT(controller) and the motor simulation model; the model has high pointing and tracking precision. Besides simulating motor's normal functions, the model's parameters can be changed …

Monkey Algorithm For Solving Logistics Center Location Selection Problem, Xiaoping Xu, Dongjie Zhang

Journal of System Simulation

Abstract: The location selection of logistics center is the most basic problem that affects the whole development of logistics center; an improved monkey algorithm is used to solve the problem. The basic idea is that the chaos variables are used to generate the initial feasible solution of the monkey algorithm, the decreasing factor is taken as the climbing step in the climbing process and a chaotic search method is introduced in the looking process to improve the performance of the algorithm. Through simulation experiment, the solution results of typical function and logistics center location problem are given to illustrate the …

Simulation Analysis Of Nearest Neighbor Searching For Anti-Ship Missile Target Selector Performance, Sun Jie, Tianyun Wang, Huanyao Dai, Cuiqiong Mo, Zhao Jing

Journal of System Simulation

Abstract: In view of that the current admission comparing searching mode is difficult to adapt to the offshore operation of anti-ship missile in multi target selection, the nearest neighbor selector applied to the target search scheme is put forward. By setting the typical searching situation, a target searching model is established; and on the basis of reasonable simplification, the nearest neighbor selector capture probability of display expression is deduced. Typical scenes in numerical simulation show that the scheme based on distance criterion for admission multiple targets for prioritization effectively improves the search performance of the target. A …

New Phase-Lock Method For Tracking Low-Voltage Ride-Through On Photovoltaic Inverters, Bobo Li, Shouzhi Li, Yanxiao Zhang

Journal of System Simulation

Abstract: The low-voltage ride-through in photovoltaic power generation is a key problem for photovoltaic inverters connected to grid. Aiming at the frequency- and phase-locking of low-voltage ride-through on the photovoltaic inverter during asymmetric fault on the grid and using positive and negative sequence separation, a dual second-order generalized integral frequency- and phase-locking algorithm (DSOGI-FLL-PLL) is proposed, and a simple FLL is used so that positive and negative sequence separation can be performed for various frequencies. The conventional phase-lock- loop (PLL) is also used to capture the grid-side voltage, which greatly reduces response time and error of PLL during asymmetric faults …