Operations Research, Systems Engineering and Industrial Engineering Commons^™

Relevance Analysis Of Deicing Parameters And Deicing Efficiency Of Aircraft Ground, Bin Chen, Liwen Wang

Journal of System Simulation

Abstract: Aircraft ground freezing could lead to potential danger and delay for flight. To alleviate these problems, the main method is to use the deicing fluids to clean ice or snow on the aircraft body, which lacks of reference of the deicing fluids parameters and efficiency. To study the effect of the deicing fluids parameters on the aircraft deicing efficiency, the deicing mechanism is analyzed.The black box mathematical model of the deicing process is generalized abstractly. The deicing process is divided into two subprocesses to establish the deicing model.The relevance between the deicing fluids parameters and deicing efficiency is studied …

A Novel Algorithm For Improving Fairness Between Uplink And Downlink Flows In Heterogeneous Network, Peiyu Li, Zheqing Li, Wang Hui, Xia Qian

Journal of System Simulation

Abstract: In order to improve the fairness between uplink and downlink flows in AP optimization, a novel algorithm called FOUD(fairness over uplink and downlink) is proposed.Considering the influence of the attempt limit and the bit error rate of wireless, the FOUD algorithm modeling of AP and wireless stations is studied separately by using two-dimensional Markov chain, which derives the probability of data sending under the condition of different bit error rate and different number of uplink and downlink flows. Simulation results show that FOUD can improve the fairness of the uplink and downlink bandwidth as well as the …

Frequency Domain Analysis Of Common Configuration Semi-Submersible Drilling Platform Based On System Simulation, Chen Bo, Zhiyong Yu, Lü Yong, Xiaojian Li

Journal of System Simulation

Abstract: To analysis of 4 semi-submersible drilling platform hydrodynamic performance providing a comprehensive guidance for system selection. The 1:1 3D wet surface model is established by ANSYS and numerical simulation is carried out based on the dynamic analysis software AQWA. Simulation results show that longitudinal waves impact the surge, heaving and pitching motion a lot, beam seas have large effects on the sway, heave, roll motion vertical heave response increases significantly, as will as surge, sway, heave damping coefficient of vector direction and the added mass coefficient of algebraic. We can not only increase the number of columns to …

A Method Of Finding The Shortest Path Of Dynamic Networks, Lunwen Wang, Zhang Ling

Journal of System Simulation

Abstract: We analyze the research status of finding the shortest path of dynamic networks, analyze the complexity of getting the shortest path, study the relationship between the structure of the dynamic networks and finding the shortest path of the dynamic networks. It is proved that dynamic networks defined by velocity automatically meet weak FIFO’s condition. The networks whose passing function of any side is not decreasing function equals dynamic networks which use velocity. The sufficient condition of directly using Dijkstra algorithm to get the shortest path is that the networks must meet weak FIFO’s condition. How to build a …

Fuzzy Sliding Backstepping Mode Control For Flight Simulator Servo Based On Friction And Disturbance Compensation, Huibo Liu, Shanglei Liu

Journal of System Simulation

Abstract: Considering friction, modeling errors and other uncertainties of flight simulator servo system, a compensation strategy which combines model-based friction compensation with nonlinear disturbance observer compensation was proposed. First, the friction is modeled , whose parameters are identified by using genetic algorithm, and using the identified model to compensate. Second, using a nonlinear disturbance observer to estimate the modeling errors, friction less-compensation or over-compensation and other uncertainties, and using this observed value to compensate. The system adopted sliding backstepping controller to ensure the stabilization of the system. Finally, the fuzzy algorithm is adopted to adjust the switching gain of sliding …

Preliminary Study Of Modeling And Simulation Technology Oriented To Neo-Type Artificial Intelligent Systems, Libo Hu, Xudong Chai, Zhang Lin, Li Tan, Duzheng Qing, Tingyu Lin, Liu Yang

Journal of System Simulation

Abstract: A brief interpretation of the rapidly developing “New Internet+ Big Data+ Artificial Intelligence+” era is given in the paperand the essence and the architectureof neo-type artificial intelligence systems are explained. The meaning of neo-type artificial intelligence system oriented modelling and simulation technology is proposed and the new challenges they are facing are discussed. The research contents and preliminaryresults on neo-type artificial intelligence system oriented modelling and simulation technology are given, which includeneo-type artificial intelligence system oriented modelling/secondary modelling, intelligent simulation computer, smart cloud simulation and intelligent simulation hardware/software supporting system technology, and intelligent simulation system application engineering technology. Several …

Moving Toward Prevention: Rural Water Maintenance And Sustained Service Delivery, Caleb Cord, Jeffrey P. Walters, Harold Lockwood, Pranav Chintalapati, Amy Javernick-Will, Karl Linden

Faculty Publications - Biomedical, Mechanical, and Civil Engineering

This paper outlines a research plan to be conducted across the Sustainable WASH Systems (SWS) Learning consortium to learn from maintenance approaches both internal and external to the partnership. It follows a study commissioned by IRC WASH and SWS which gathered information on prominent existing approaches from key informants.

System Dynamics Modelling As A Tool For Assessing Rural Water Sustainability, Pranav Chintalapati, Jeffrey P. Walters, Amy Javernick-Will, Karl Linden

Faculty Publications - Biomedical, Mechanical, and Civil Engineering

System dynamics modelling is a tool that has been used for decades in business management and economics applications, but little focus has been applied to the WASH sector.

Specifically, this paper discusses the use of causal loop diagrams and stock flow diagrams as methods to better understand the systemic drivers affecting sustainability of rural water service delivery.

Biologically Inspired Design Of Context-Aware Smart Products, Ang Liu, Ivan Teo, Diandi Chen, Stephen Lu, Thorsten Wuest, Zhinan Zhang, Fei Tao

Faculty & Staff Scholarship

The rapid development of information and communication technologies (ICTs) and cyber–physical sys-tems (CPSs) has paved the way for the increasing popularity of smart products. Context-awareness isan important facet of product smartness. Unlike artifacts, various bio-systems are naturally characterizedby their extraordinary context-awareness. Biologically inspired design (BID) is one of the most commonlyemployed design strategies. However, few studies have examined the BID of context-aware smart prod-ucts to date. This paper presents a structured design framework to support the BID of context-awaresmart products. The meaning of context-awareness is defined from the perspective of product design.The framework is developed based on the theoretical foundations …

Engineering Of Bio-Mimetic Substratum Topographies For Enhanced Early Colonization Of Filamentous Algae, Ali Khoshkhoo, Andres L. Carrano, David M. Blersch

Systems Science and Industrial Engineering Faculty Scholarship

No abstract provided.

Investigating A Cyber-Human System For Millennial Caregivers, Ashley Lofton

Theses

Research indicates that most caregiving of persons with dementia (PwD) is done by adults 49 years of age and older. However, millennials make up 25% of the estimated 44 million caregivers in the United States. Although the definition varies, “millennials” for this research is defined by those born between 1984 - 2000, which aligns with the research by Strauss and Howe (2003). Millennial caregivers are taking on this task as their parents or grandparents get older and diagnosed with dementia. Taking on the task of caring for a loved one with dementia can present itself as difficult because of competing …

Ua66/16/2 Ogden College Of Science & Engineering Ogden College Of Science & Engineering Publications, Wku Archives

WKU Archives Collection Inventories

Publications created by and about Industrial & Engineering Technology.

Successfull Implementation Of The Baldrige Performance Excellence Program In Small Businesses, Valentina Parra

Honors Undergraduate Theses

In recent years, companies have been focused on improving organizational performance and the loyalty of customers to improve sustainability in increasingly complex markets. The Baldrige Performance Excellence framework, generally referred to as the Baldrige criteria, was created to guide professionals in achieving these goals including defining a set of excellence criteria and offering an award program to recognize high-performing organizations. The principles of excellence focus on understanding and working for the stakeholders, improving performance and quality management, and strategically driving continuous improvement. The framework can be used for organizational self-assessments; however, many organizations find it challenging to interpret and apply …

Ua66/16/1 Ogden College Of Science & Engineering Ogden College Of Science & Engineering Administration, Wku Archives

WKU Archives Collection Inventories

Administrative records created by Industrial & Engineering Technology.

A Structured Methodology For Tailoring And Deploying Lean Manufacturing Systems, Kenneth John Gembel Ii

Wayne State University Dissertations

The seminal works of Peter Drucker and James Womack in the 1990’s outlined the lean manufacturing practices of Toyota Motor Corporation (TMC) to become a world leader in manufacturing. These philosophies have since become the springboard for a significant paradigm shift in approaching manufacturing systems and how to leverage them to optimize operational practices and gain competitive advantage. While there is no shortage of literature touting the benefits of Lean Manufacturing Systems (LMS), there has been significant difficulty in effectively deploying them to obtain and sustain the performance that TMC has achieved.

This body of work provides a novel methodology …

Ce 5500: Stochastic Hydrology, University Of Virginia, Julianne Quinn

All ECSTATIC Materials

This document is the syllabus for CE 5500: Stochastic Hydrology by instructor Julianne D. Quinn at the University of Virginia. The course is an elective class, open to upper-level undergraduate and graduate students.

Understanding The Relationship Of Innovation And Quality In A Fast-Changing Market: An Automotive Industry Perspective, Donna Leanne Bell

Wayne State University Dissertations

In a time when the consumer electronics industry is getting new products to market at a rapid rate, automotive original equipment manufacturers (OEM) must identify ways of getting new products and features to customers faster and with high quality to maintain or increase market share. This accelerated product development process requires a positive relationship between conceptual design and quality in order for a firm to have high performance in strategic areas innovation and quality. The purpose of this dissertation is to research the impact that quality practices have on the advanced product development process. Specifically, this research is focused on …

Understanding The Impact Of Virtual-Mirroring Based Learning On Collaboration In A Data And Analytics Function: A Resilience Perspective, Nabil Raad

Wayne State University Dissertations

Large multinational organizations are struggling to adapt and innovate in the face of increasing turbulence, uncertainty, and complexity. The lack of adaptive capacity is one of the major risks facing such organizations as the rapid change in technology, urbanization, socio-economic trends, and regulations continues to accelerate and outpace their ability to adapt. This is a resilience problem that organizations are addressing by investing in Data and Analytics to improve their innovation and competitive capabilities. However, Data and Analytics projects are more likely to fail than to succeed. Competing on data and analytics is not only a technical challenge but also …

Autonomous Drone Monitoring System, Reed Horton, Garcy Garcia Donis, Ryan M. Hall, Craig L. Calhoun, Sean K. Weinstein, Gregory E. Hunter

ENGS 89/90 Reports

This paper lays out the design of a system which would house a drone and allow for automated launching and landing. It consists of a base, electronics system, and software which controls the drone. This paper outlines a first prototype of the system and allows for continued development.

The Resilient City: A Platform For Informed Decision-Making Process, Paul Niculescu-Mizil Gheorghe, Jarutpong Vasuthanasub, Adrian Gheorghe

Engineering Management & Systems Engineering Faculty Publications

As over half of the world’s inhabitants lives in metropolises, the rapid growth in urbanization has made cities becoming more and more exposed and vulnerable to a broad spectrum of threats and hazards. In order to respond to such difficulties, a concept of resilience is considered a significant component for the long-term planning and sustainable development of the cities. “Resilient City” is a new paradigm that challenges the idealistic principle of stability and resistance to change implicitly in sustainable development and success. However, building a resilient city requires a holistic approach, as well as the appropriate adoption of knowledge and …

History And Current Status Of Human Readiness Levels, Judi E. See, Holly Handley

Engineering Management & Systems Engineering Faculty Publications

[First slide]

• HRLs have been proposed as an analogue to TRLs to provide similar benefits.
• TRLs are routinely used throughout the DOD, DOE, Industry, and academia
• Value of TRLs is widely recognized.

Benefits of TRLs

Demonstrating high maturity for new technologies increases changes of program success.

• Use a common terminology across diverse organizations
• Promote testing and verification to asses maturity
• Gauge progress to plan future level of effort needed to achieve maturity
• Help manage schedule and cost risks
• Provide assurance that technologies will function as intended.

• HRLs are designed to complement TRLs during technology development.
• Mirror simple nine-level TRL scale …

Routing Algorithm For The Ground Team In Transmission Line Inspection Using Unmanned Aerial Vehicle, Yu Li

Masters Theses

"With the rapid development of robotics technology, robots are increasingly used to conduct various tasks by utility companies. An unmanned aerial vehicle (UAV) is an efficient robot that can be used to inspect high-voltage transmission lines. UAVs need to stay within a data transmission range from the ground station and periodically land to replace the battery in order to ensure that the power system can support its operation. A routing algorithm must be used in order to guide the motion and deployment of the ground station while using UAV in transmission line inspection. Most existing routing algorithms are dedicated to …

A Study Of Perceptions On Incident Response Exercises, Information Sharing, Situational Awareness, And Incident Response Planning In Power Grid Utilities, Joseph Garmon

Electronic Theses and Dissertations

The power grid is facing increasing risks from a cybersecurity attack. Attacks that shut off electricity in Ukraine have already occurred, and successful compromises of the power grid that did not shut off electricity to customers have been privately disclosed in North America. The objective of this study is to identify how perceptions of various factors emphasized in the electric sector affect incident response planning. Methods used include a survey of 229 power grid personnel and the use of partial least squares structural equation modeling to identify causal relationships. This study reveals the relationships between perceptions by personnel responsible for …

Framework For Improving Complex System Performance, Charles B. Keating, Polinpapilinho F. Katina, Ra'ed Jaradat, Joseph M. Bradley, Richard Hodge

Engineering Management & Systems Engineering Faculty Publications

This paper introduces a framework for improvement of complex system performance. Complex systems are besieged with conditions marked by increasing uncertainty, emergence, and ambiguity. Additionally, demands for increased productivity, resource efficiencies, and performance improvement make new approaches paramount for modern systems engineers. In response, a framework to improve complex system performance is developed. Following an introduction, the paper pursues four objectives: (1) introduction of Complex System Governance (CSG) as a foundation to describe essential system functions, (2) suggest system `pathologies' as an explanation for deep system performance issues, (3) exploration of system performance improvement as a function of `requisite variety' …

Development Of A New Instrument To Assess The Performance Of Systems Engineers, Niamat Ullah Ibne Hossain, Morteza Nagahi, Raed Jaradat, Charles Keating

Engineering Management & Systems Engineering Faculty Publications

Complex systems continue to confound the capabilities of systems engineers to deal with and navigate a new generation of problems. Thus, there is an emerging need to develop a cadre of effective systems engineers capable of efficiently addressing complex systems problems. This paper introduces a new system engineering instrument that assesses the performance of systems engineers. The instrument is based on the set of performance indicators examining six fundamental system engineering attributes. This instrument would provide a baseline to understand the current state of the systems engineering skills for a systems engineer and indicate developmental areas to enhance those skills. …

Healthcare Robotics: Key Factors That Impact Robot Adoption In Healthcare, Sujatha Alla, Pilar Pazos

Engineering Management & Systems Engineering Faculty Publications

In the current dynamic business environment, healthcare organizations are focused on improving patient satisfaction, performance, and efficiency. The healthcare industry is considered a complex system that is highly reliant of new technologies to support clinical as well as business processes. Robotics is one of such technologies that is considered to have the potential to increase efficiency in a wide range of clinical services. Although the use of robotics in healthcare is at the early stages of adoption, some studies have shown the capacity of this technology to improve precision, accessibility through less invasive procedures, and reduction of human error during …

A Multi-Response Optimization For Isomerization Of Light Naphtha, Donia Abdel Nasser Fathy, Moustafa A. Soliman

Chemical Engineering

Isomerization process is considered one of the main processes used to produce high octane rating gasoline with improved environmental conditions and less emissions. The main keys of performance in isomerization units are the product yield, paraffin isomerization number (PIN) and octane number (RON). In this article we present a multi-response optimization strategy for an industrial naphtha continuous isomerization-process that aims to maximize RON, PIN and yield. Data of 53-runs including feed compositions as well as operating conditions; reactor temperature, benzene content, liquid hour space velocity, feed PIN, hydrogen to hydrocarbon ratio, feed octane number, C7+ content, inlet reactor temperature and …

Retail Facility Layout Considering Shopper Path And Door Placement, Sagarkumar D. Hirpara

Browse all Theses and Dissertations

The physical design of a retail store is known to influence the attitude and behavior of shoppers, in turn affecting the store’s performance. While literature in retail design has alluded to the impact of changes in department placements on impulse revenue, it has not accounted for the changes in the path of a shopper due to such modifications. Shopper path changes can alter a department’s visibility to the shoppers as they pass by, and such visibility eventually impacts that department’s impulse revenue. To address this gap, we study the retail facility layout problem by accounting for changes in the shopper …

Supply Chain Infrastructure Restoration Calculator Software Tool -- Developer Guide And User Manual, Akhilesh Ojha, Bhanu Kanwar, Suzanna Long, Thomas G. Shoberg, Steven Corns

Engineering Management and Systems Engineering Faculty Research & Creative Works

This report describes a software tool that calculates costs associated with the reconstruction of supply chain interdependent critical infrastructure in the advent of a catastrophic failure by either outside forces (extreme events) or internal forces (fatigue). This tool fills a gap between search and recover strategies of the Federal Emergency Management Agency (or FEMA) and construction techniques under full recovery. In addition to overall construction costs, the tool calculates reconstruction needs in terms of personnel and their required support. From these estimates, total costs (or the cost of each element to be restored) can be calculated. Estimates are based upon …

An Analysis Of Resistance Spot Weld Quality Based On Acoustic And Electrical Signatures, Ivan Charles Butler

Theses and Dissertations--Manufacturing Systems Engineering

The union of a set of materials by way of Resistance Spot Welding is designed so that once fused together, a substantial amount of intentional, external force must be applied to separate the contents. Therefore, Resistance Spot Welding is often the preferred fusion method in high-volume manufacturing processes. The result of Resistance Spot Welding however is the formation of a weld nugget which is not visible to the naked eye. Destructive and/or ultrasonic methods applied off-line must be used to determine the quality of each weld; both inefficient and expensive processes. The following research analyzes the data fed back during …