Operations Research, Systems Engineering and Industrial Engineering Commons^™

Australian Tractor Tests : International A554d : Report On Test No. 36 (Farmers' Edition), G H. Vasey, W. F. Baillie

Journal of the Department of Agriculture, Western Australia, Series 4

THIS Report is taken from the full Technical Report No. 36; results are shown here in briefer form: fuller explanations are added.

Values quoted may be rounded out to two instead of three significant figures; to this extent the values may differ slightly but not significantly from those shown in the Technical Report.

A Shell-Theory Analysis Of Transient Thermal Stresses In Moderately Thick-Walled Cylinders, Thomas K. Mckinley

Mechanical Engineering ETDs

This paper investigates the validity of extending the concepts of shell theory to transient thermoelastic problems involving moderately thick-walled shells. The region of study is a moderately thick-walled cylinder which is constrained radially at both ends and is exposed to a uniform, time-dependent heating (or cooling) at one end. The cylinder walls are assumed to be adiabatic, and inertia effects are neglected in the development.

It is concluded from the results of this investigation that the extension of shell theory to moderately thick-walled cylindrical regions subjected to axial, time-dependent temperature variations is an analytical method of approach.

Australian Tractor Tests : Fordson Farm Major : Report On Test No. 33, G H. Vasey, W. F. Baillie

Journal of the Department of Agriculture, Western Australia, Series 4

THIS Report is taken from the full Technical Report No. 33 of this test; test results are shown here in briefer form: fuller explanations are added.

Values quoted may be rounded out to two instead of three significant figures; to this extent the values may differ slightly but not significantly from those shown in the Technical Report.

Graphs of belt test performance, shown in the Technical Report, are not shown here.

Its Shearing Time, Department Of Agriculture, Western Australia

Journal of the Department of Agriculture, Western Australia, Series 4

SHEARING will soon be taking place on your property. For a smooth annual wool harvest, remember:—

Australian Spark Arrester Tests : Test No. Spa-21 : Caterpillar D7 Turbocharger, W F. Baillie, G. H. Vasey

Journal of the Department of Agriculture, Western Australia, Series 4

FORMAL tests on spark arresters are conducted by The Tractor Testing Committee* at the Testing Station, Werribee, on behalf of those Companies concerned with tractors, engines or spark arresters who wish to have these equipments tested.

The arrester is tested on the engine it is specially designed for (as in this instance), or if it is sold for use on any or several engines, it is tested on an engine of the highest power for which the spark arrester is intended.

Australian Tractor Tests : Report On Test No. 32, G H. Vasey, W. F. Baillie

Journal of the Department of Agriculture, Western Australia, Series 4

THIS Report is taken from the full Technical Report No. 32 of this test: test results are shown here in briefer form: fuller explanations are added. Values quoted may be rounded out to two instead of three significant figures:

A Crush For Tuberculin Testing Of Cattle, A L. Ripper

Journal of the Department of Agriculture, Western Australia, Series 4

ALWAYS a useful asset on any farm where livestock are kept, a strongly-constructed crush is essential where tuberculin testing makes it necessary to deal with dry stock, bulls and young animals that have not been previously handled.

The crush described in this article was specially designed for tuberculin testing, but will serve equally well for vaccinating, branding, de-horning or any operation where restraint is necessary.

Let's Look At Herringbone Dairies, R A. Bettenay, F. Fielder

Journal of the Department of Agriculture, Western Australia, Series 4

THE first of the modern type herringbone dairies in Western Australia was constructed by Mr. F. Tucker of Ruabon, in 1957.

Since then there has been strong interest in this system, and there are now at least six such sheds operating in the district between Ludlow and Augusta. Many more are being constructed.

Australian Tractor Tests : Report On Test No. 34 : Fordson Power Major, G H. Vasey, W. F. Baillie

Journal of the Department of Agriculture, Western Australia, Series 4

THIS Report is taken from the full Technical Report No. 34 of this test; test results are shown here in briefer form: fuller explanations are added.

Values quoted may be rounded out to two instead of three significant figures; to this extent the values may differ slightly but not significantly from those shown in the Technical Report

Some values are taken from graphs shown in the Technical Report, which are not shown here.

Australian Tractor Tests : Zetor 50 Super : Report On Test No.35, G H. Vasey

Journal of the Department of Agriculture, Western Australia, Series 4

T H I S Report is taken from the full Technical Report No. 35; results are shown here in briefer form: fuller explanations are added. Values quoted may be rounded out to two instead of three significant figures.

The Status Of Industrial Arts In Hawaii, Teruo Mukai

Dissertations and Theses @ UNI

Many people are interested in the industrial-arts program in Hawaii, especially since it has become the fiftieth state. Because of the interest, and since the background of the writer included eighteen years of residence in Hawaii and five years of professional preparation in the field of industrial arts it was decided that a status study would be made to see what was going on in the industrial-arts program in Hawaii.

It was the purpose of this study (1) to determine teacher qualifications as to college preparation and experience; (2) to determine what type of shops were most common such as …

Industrial-Arts Objectives And Course Content For The Junior High School, William Earl Stock

Dissertations and Theses @ UNI

The purpose of this study were to determine: (1) the stated objectives in the more recent industrial-arts courses of study for the junior high school; and (2) the courses or units which should comprise the industrial-arts curriculum of the junior high school as indicated by selected industrial-arts teachers.

The objectives were recorded from state and city industrial-arts bulletins for the junior high school and compared to a master list compiled in a study by Reed. Objectives which were listed in 50 per cent or more of the bulletins were considered to be objectives for junior-high-school industrial arts which characterize the …

A Follow-Up Study Of Industrial Technology Graduates From Western Michigan University, Dale Donald King

Masters Theses

Chapter I

The Problem and Its Setting

During the past few years, nationally prominent industrial and educational leaders have been concerned with the present shortages of engineers and technically trained personnel. These leaders appear to be concerned with the utilization of manpower and in present and future educational patterns which will insure an ample supply of technically competent personnel.¹

Staff members of Western Michigan University are also concerned with the technician. In fact, 243 students were graduated from thirteen Industrial Technology curriculums during the period of 1955 through 1959. It is believed that the school has been effective in …

Australian Tractor Tests : No. 30, G. H. Vasey, W. F. Baillie

Journal of the Department of Agriculture, Western Australia, Series 4

THIS Report is taken from the full Technical Report No. 30 of this test; test results are shown here in briefer form: fuller explanations are added.

Values quoted may be rounded out to two instead of three significant figures; to this extent the values may differ slightly but not significantly from those shown in the Technical Report.

Graphs of belt test performance, shown in the Technical Report, are not shown here.

Australian Spark Arrester Tests : Spark Arrester For International B-250, W. F. Baillie, G. H. Vasey

Journal of the Department of Agriculture, Western Australia, Series 4

FORMAL tests on spark arresters are conducted by The Tractor Testing Committee at the Testing Station, Werribee, on behalf of those companies concerned with tractors, engines or spark arresters who wish to have these equipments tested.

Shearing Shed Design, W L. Mcgarry, D. A. Young, M. Butler

Journal of the Department of Agriculture, Western Australia, Series 4

PLANNING the layout of a shearing shed requires a good deal of thought to ensure its maximum working efficiency.

If the contemplated structure is to serve the dual purpose of storage-shearing shed, it is better to plan a shearing shed that can be used for storage, rather than a storage shed with a view to its utilisation as a shearing shed.

Tractor Testing In Australia, G H. Vasey, W. F. Baillie

Journal of the Department of Agriculture, Western Australia, Series 4

AUSTRALIA is one of several countries that have set up "official" tractor testing schemes.

These schemes mean testing stations that, while providing a testing service for both the manufacturing industry and the consumer, in effect mainly the farming industries, are independent of either.

Tractor Testing In Australia. Part 2, G H. Vasey, W. F. Baillie

Journal of the Department of Agriculture, Western Australia, Series 4

AUSTRALIAN test procedures, though differing: in some details, and in some ways going further and telling more about the tractor, conform in essentials to overseas standards.

The tests are in four main parts—

(a) the physical properties of the tractor;

(b) the power of the engine, and its stationary outlets—the belt and the p.t.o;

(c) the power on the drawbar when working on a formalised test surface or track;

(d) the reliability of the tractor when running under test, and its condition after the test.

Hold On To Your Egg Profits, J A. Hoy

Journal of the Department of Agriculture, Western Australia, Series 4

IN recent years, much sound advice has been made available to poultry farmers to assist them in developing their properties and operating them on profitable lines.

Much of this advice has been utilised to good advantage, but there are still many properties on which the profits are being reduced by feed wastage, damage by rats and mice, lack of sufficient attention to egg quality, unnecessarily high labour costs and failure to keep farm records.

Bulk Handling Of Superphosphate, H G. Cariss

Journal of the Department of Agriculture, Western Australia, Series 4

A MAJOR factor in our agricultural production is the outlay for fertilisers, including the cost of their application to the land.

Any means which can be employed to reduce these costs are therefore of extreme importance to the State's agriculture.

The bulk-handling of fertilisers could be one way of reducing these costs to the farmer.

Australian Spark Arrester Tests, W. F. Baillie, G. H. Vasey

Journal of the Department of Agriculture, Western Australia, Series 4

FORMAL tests on spark arresters are conducted by The Tractor Testing Committee at the Testing Station, Werribe, on behalf of those Companies concerned with tractors, engines or spark arresters who wish to have these equipments tested.

The arrester is tested on the engine it is specially designed for (as in this instance), or if it is sold for use on any or several engines, it is tested on an engine of the highest power for which the spark arrester is intended.

A Follow-Up Study Of Former Senior High School Industrial Arts Students At Belle Plaine, Iowa, Donald E. Wallis

Dissertations and Theses @ UNI

The primary purpose of this study was to determine, through the experiences and present status of the graduates and drop-outs who enrolled for industrial arts at the Belle Plaine High School, how effectively the industrial arts program had met their vocational as well as their general needs after leaving high school.

Further purposes of the study were 1) to evaluate the present industrial arts program in the school; and (2) to recommend changes which might enable the industrial arts department to meet the needs of youth more effectively.

The Effectiveness Of The Mass-Production Technique In Achieving Selected Objectives For Industrial Arts, Michael William Horton

Dissertations and Theses @ UNI

The purpose of this study was to answer the following questions related to the mass-production technique of teaching industrial arts:

1. Will two comparable groups of student show a significiant difference in achievement with respect to selected industrial-arts objectives when one group is taught by the traditional method and the other is taugh, in part, by the mass-production technique?

2. Will a mass-production project conducted for a period of six to eight weeks aid in the students' understanding of the problems, processes, and methods fo product development and production in industry?

3. Will students who work exclusively on individual projects …

Australian Tractor Tests : No. 31, G. H. Vasey, W. F. Baillie

Journal of the Department of Agriculture, Western Australia, Series 4

THIS Report is taken from the full Technical Report No. 31 of this test; test results are shown here in briefer form: fuller explanations are added. Values quoted may be rounded out to two instead of three significant figures; to this extent the values may differ slightly but not significantly from those shown in the Technical Report. Graphs of belt test performance, shown in the Technical Report, are not shown here.

A Survey Of Industrial Arts In The Public Schools Of North Dakota, Milo Norman Sulentic

Dissertations and Theses @ UNI

The writer ahs been on the faculty of the State Normal and Industrial College at Ellendale, North Dakota since 1957. During this time he became concerned about the status of industrial arts in the public schools of North Dakota. Since instruction in industrial arts depends to a large extent on the facilities and equipment available for use by the individual teacher and the nature of the ship program, it would seem desirable for those colleges preparing industrial arts teachers to know the status of this subject area in the public schools of their state. Such information could be used to …

A Study Of A Production Control System In A Job Order Die Casting Plant, Robert Gordon Woodnorth

Theses

This thesis examines the production planning and control system in a job-order die casting plant. After comparing to the criteria for an ideal system the following changes were recommended.

1. Central work storage and dispatching. This would reduce work in process and workload fluctuations through closer planning. It would also provide a perpetual inventory system and a central control point which would be constantly informed of production progress.

2. Operator trucking. By having operators do their own trucking material handling costs and production delays would be reduced.

3. Simplified job cost accounting. The use of standard costs for finishing and …

A Study Of The Extent To Which Girls Were Included In Industrial Arts In Grades Seven Through Twelve In The State Of Iowa, Walter Haynes

Dissertations and Theses @ UNI

The purpose of this study was to determine the extent to which girls were included in industrial arts in grades seven through twelve in the state of Iowa.

A Learning Index For The Midget Wiggly Block Test For Mechanical Ability, James Franklin Winegarden

Dissertations and Theses @ UNI

The writer became interested in testing mechanical ability while taking a course in the 1957 summer session at the Iowa State Teachers College dealing with the problem of teaching industrial arts. The teacher of this course was Dr. Howard O. Reed who had devised the Midget Wiggly Block Test for Mechanical Ability, which will be referred to hereafter in this report as the Midget Wiggly Block Test. During a class presentation, Reed state that there may be a learning process involved in the repeated assembling of the Midget Wiggly Block Test and presented a single formula for computing a score …

Synthetic Fiber Industry- A Story In Industrial Location, Leonard D. Goranson

Journal of the Arkansas Academy of Science

No abstract provided.

An Analysis Of Predetermined Time Systems, Richard Otto Schmid

Theses

This paper endeavors to compare three predetermined time systems, namely; Work-Factor, Methods-Time Measurement and Basic Motion Time-study, elemental-by-elemental, through the use of a series of detailed analyses. The following information in the form of conclusions and recommendations has been set forth from the investigation of the various comparative analyses contained herein:

1. Reasons for the variation between the elementals.

2. A chronological order of attack for further study with an eye to accomplishing the most in the shortest possible time.

3. The results of a composite analysis which utilizes the most realistic elemental definitions of the three systems. (This includes the comparison of …

   ---

   Go to article