Operations Research, Systems Engineering and Industrial Engineering Commons^™

Bulletin Ma 20 - Sheep Yard Plans - Flocks Up To 500, D. Bicknell

Animal production and livestock published reports

Manjimup Regional Office

Owners of small flocks often use much more labour per sheep than do owners of large flocks. Most of the difference in labour use is the design of sheep sheds and sheep yards, and a smaller affect from the mob size and experience in handling sheep.

This booklet gives some detail on design and construction of yards and a number of yard plans to handle up to 500 or so sheep. Many of the plans are from an Australian Wool Corporation publicatiot1 "Wool Harvesting Notes".

Lifo Perishable Inventory (S,S,T) Model And Its Related Discount Policy, Yuan-Shyi Chiu

Theses

The objective of this thesis is to determine the optimal (s,S,T) ordering policy for a perishable inventory system with a fixed product lifetime and Poisson demand. The simulation technique is utilized to identify the optimal ordering policy which minimizes the total cost consisted of ordering, holding, shortage, and outdate costs. Upon the establishment of the optimal ordering policy, a discount policy on the outdating items is proposed to provide decision maker(s) with tradeoff between the profit and the average outdate cost.

The computer programs written in FORTRAN are designed to generate the optimal (s,S,T) ordering policy of any above-mentioned inventory …

Acuta Enews September 1983, Vol. 12, No. 9

ACUTA Newsletters

In This Issue

PARTY LINE

FROM THE PRESIDENT

BOCS WILL BREATHE NEW LIFE INTO VOICE STORE AND FORWARD

ACUTA SERVICE AWARDS-- 1983

SLOW-SCAN BRINGS STUDENTS AND FACULTY TOGETHER IN UNIVERSITY OF HAWAII EXPERIMENT

RADIO OPERATORS USE SLOW-SCAN

TRANSMISSION FACILITIES A MUST

BITS & PIECES

Acuta Enews July 1983, Vol. 12, No. 7

ACUTA Newsletters

In This Issue

PARTY LINE

ANOTHER AT&T

FROM THE BOARD

"MOUTH OF THE SOUTH"

BITS & PIECES

Acuta Enews June 1983, Vol. 12, No. 6

ACUTA Newsletters

In This Issue

INSIDE ACUTA

PARTY LINE

FROM THE BOARD

MOUTH OF THE SOUTH

BITS & PIECES

Designing Cost Effective Pump Suction Systems Using Statistical Correlation Techniques To Estimate Vessel Elevation Costs, Neil J. Bernstein

Theses

In order to minimize total costs (investment plus operating costs) when elevating process equipment to meet hydraulic requirements, it is essential to establish cost effective and energy efficient pump suction systems. During the early stages of design of such systems it is most critical that preliminary costs be determined in a timely manner to avoid job delays. One method of accomplishing this is through the use of a cost estimating relationship for defining the price behavior of alternative pump suction systems. This thesis describes the procedure used to develop a mathematical model to predict the cost of elevating vertical drums. …

Industrial Parameters For Applying New Technology, Michael Cimino

Theses

Industrial Parameters for Applying New Technology is a paper devoted to the study of the role 'of' robots in today's manufacturing environment. Industry looks forward to robotic technology to solve, its declining productivity dilemma. The purpose of this paper is to' aid a Prospective robot buyer in selecting the appropriate application and in particular a suitable robot for that application. A listing of robot performance characteristics, criteria chart, and evaluation table were developed to guide the engineer through the necessary steps required in selecting a successful robot application.

The history of robotics is discussed briefly along with an explanation of …

Design Criteria For Employee Alcholism Programs, Lee G. Conover

Theses

This thesis is an examination and evaluation of treating employee alcohol-related problems through a counseling program. Special attention has been given to the many aspects that must be considered for the implementation of a successful counseling program.

To gather the data for this thesis, a successful counseling program was observed and members of its counseling program staff, medical, labor relations, and personnel departments, along with its union representatives, were interviewed in order to draw on their experience and expertise in organizing, implementing and maintaining such a counseling program. A counseling program consultant, a representative of the New Jersey Department of …

Proposed Product Plan For A High Growth, High Technology Organization, Alan R. Eschbach

Theses

Analyzing and consequently redefining a corporation's product line or mix is an important task facing all manufacturing organizations. While this task is usually addressed in detail as part of an organization's business plan, it can be very disconcerting when an organization realizes that the markets and products that got them to where they are now will not necessarily be the ones that will give them the growth that they would like to realize. Redefining the product line can be even more critical to young, high technology organizations who have never done it before and have found themselves facing the possibility …

Management Of The Interface Between Product Design And Production, Adam Fischer

Theses

The goal of this thesis was to identify some of the many obstacles which tend to, in some way or manner, delay the timely, satisfactory progression of new developments from becoming new profit items. These obstacles which are numerous are the results of personal observation plus research of many books and periodicals. The identification of the obstacles will hopefully result in their obviation. Notable accomplishments along these lines tend to:

1. Reduce the loss of opportunity to gain an appreciable market share.

2. Reduce investment/overhead cost by earlier recovery of cost through earlier marketing effort.

3. Reduce continuing engineering costs …

A Study Of Personal Conflict And Stress Among Engineering Personnel As Influenced By Corporate Policy, Stated And Unstated, Richard Brian Gordon

Theses

The following concepts are being challenged: That organizations are efficient, well-managed, and intelligent: that if one is to believe in any sort of authority, one must first accept the notion that it truly knows best and that it is not only competent, but well-intentioned; that organizations exist for the benefit of their employees and customers; that organizations reward dedication, competence, and performance: that if the organization is to grow it needs loyal sacrificing people; that organizations are dynamic and receptive to change; that if the employee is discouraged, do not worry, for tomorrow will be better; that to be useful …

An Application Of Personal Microcomputer To Solve Mid-Sized Goal Programming Problems, Chanhon Joe Lu

Theses

This thesis develops a microcomputer software to solve mid-sized goal programming problems utilizing the revised simplex method.

Goal programming is an extension of linear programming, but is more powerful and flexible than linear programming because of its capability in handling problems with multiple conflicting objectives, instead of dealing with "one dimensional" objective - profit maximization or cost minimization. Accordingly, goal programming is very useful to the complex organizational environments.

With the help of rapid and accurate computation of digital computers, solving a complex program is not a difficult task at all. However, some medium-sized companies cannot afford a mainframe -computer, …

The Operational Utility Of The Walton-Mckersie Attitudinal Structuring Model In Collective Bargaining, Donald Warren

Theses

This work is an heuristic inquiry into behavioral change theory designed for application to labor/management interaction in collective bargaining. The theory itself was postulated by Richard E. Walton and Robert B. McKersie in their book A Behavioral Theory Of Labor Negotiations. The principles of their theory are highly axiomatic and their importance and validity can only be recognized through applied empirical analyses that demonstrate or refute its concept.

The aspect of the theory which is the focal point of this research pertains to the structuring and restructuring of attitudes and attendant relationships resulting from the collective bargaining process. The objective …

Automation Considerations For A Manufacturing System, Marvin Fachuan Wang

Theses

This thesis examines the present manufacturing system of Apollo Valve Company, a solenoid control valves manufacturing. After analyzing the present system, the automation considerations and proposed new system were recommended.

Chapter 1 presenti the background material of automation and manufacturing system. The development of the automated factory is also included. The plant layout, organization, and departments functions of the present system are briefly described in the Chapter 2. Analysis of the present manufacturing system by the production volume, by plant layout, and by the manufacturing operations, is discussed in Chapter 3.

Proposed automation considerations and improvements, such as group technology …

Organizing To Manage Future Information Technologies, John Patrick Paczkowski

Theses

The area of information technology has undergone dramatic changes over the past ten years, and the rate of change is expected to continue to accelerate through the 1980's and beyond. The newly developing information systems are providing organizations with numerous options for enhancing the quality of managerial decision making, speeding communications and improving the efficiency and effectiveness of administrative/office processes. Unfortnately, many organizations are discovering that they are unable to effectively assimilate and utilize the technology effectively. Chief executives are finding that the traditional structures for managing Data Processing, Telecommunications, and office systems are often fragmented, lack the technical expertise …

Selection And Problems Faced By The Handicapped In An Industry, Hemank Babulal Dharia

Theses

This thesis reports on the problems faced by handicapped workers placed in an industrial situation. It discusses some of the frustrations, aspirations and hopes of the disabled to find suitable work as well as the fears and misconceptions of employers who consider the employment of the handicapped.

There is discussed the work done by the author in designing jigs and fixtures to assist handicapped workers in production as well as the models of placement, job understanding and rehabilitation efforts.

The work was done at the Delaware County Branch of the Pennsylvania Association for the Blind, Chester, Pennsylvania where the author …

Managing And Controlling The Manufacturing Operations, Harish Doshi

Theses

No abstract provided.

Designing A Data Management System To Support A Quality Control Mission, Erastus Runji Muchioki

Theses

This thesis is concerned with the design of a Data Management System to support a Quality Control Mission particularly within the writer's organization. It defines the term quality, with respect to his company's needs, followed by an outline of quality control management's responsibilities. Problems of quality Control from product design, assembly to the finished product are discussed. The organization's current quality control procedures are analyzed. Problems in establishing the data base are discussed. This data is then organized to form the new Data Management System that will support a Quality Control Mission properly. In the discussion, the author tries to …

Managing In The Technical Sales Arena, Robert Munro

Theses

The major objective of this thesis is to portray the role of a Field Engineer for a major manufacturer of electrical distribution and control equipment. In so doing, it should represent a reasonable facsimile of what a sales manager of a large Field Office, comprised of approximately twelve Field Engineers, would encounter in his supervisory capacity. As such, it should provide information for those interested in entering and hoping to manage in technical sales career.

While much of the information was derived from books, periodicals, and conversations with people associated with the electrical industry, the major portion of the work …

Acuta Enews May 1983, Vol. 12, No. 5

ACUTA Newsletters

In This Issue

GETTING AHEAD IN TELECOMMUNICATIONS

ASSESSING ORGANIZATIONAL EFFECTIVENESS

IMPROVING THE QUALITY OF WORKING LIFE

CONCLUSION

Acuta Enews April 1983, Vol. 12, No. 4

ACUTA Newsletters

In This Issue

Q&A

BITS & PIECES

ANSWER TO FREQUENTLY ASKED QUESTIONS ABOUT STORE & FORWARD VOICE SYSTEMS

FUNCTIONAL INTEGRATION

WHY DATA TALKS AND VOICE WALKS

Interstate Gas Pipeline Ratemaking And Contract Implications, Henry E. Brown

Natural Gas Symposium: Contract Solutions for the Future of Regulatory Environment (March 24-25)

61 pages.

Contains references.

Contains 7 attachments.

Creditors’ Rights Involved In The Production And Sale Of Natural Gas, William M. Schultz

Natural Gas Symposium: Contract Solutions for the Future of Regulatory Environment (March 24-25)

101 pages (includes forms).

Contains 6 attachments.

Section 311 And 312 Of The Natural Gas Policy Act Of 1978 And Hinshaw Pipelines, Lauren Eaton

Natural Gas Symposium: Contract Solutions for the Future of Regulatory Environment (March 24-25)

5 pages.

Drafting And Interpreting Sensitive Gas Purchase Contract Provisions, William D. Watson

Natural Gas Symposium: Contract Solutions for the Future of Regulatory Environment (March 24-25)

8 pages.

Off-System Sales: Will They Ever Return?, Paul F. O'Konski

Natural Gas Symposium: Contract Solutions for the Future of Regulatory Environment (March 24-25)

5 pages.

Off-System Sales – Will They Ever Return? (The Interstate Side), Robert C. Mchugh

Natural Gas Symposium: Contract Solutions for the Future of Regulatory Environment (March 24-25)

27 pages (includes illustrations).

Contains 2 pages of references.

Contains 1 attachment.

The Natural Gas Industry In Transition, Ruth A. Maurer

Natural Gas Symposium: Contract Solutions for the Future of Regulatory Environment (March 24-25)

10 pages (includes illustrations).

Legislative Prospects For Wellhead Pricing Of Natural Gas, Richard G. Morgan

Natural Gas Symposium: Contract Solutions for the Future of Regulatory Environment (March 24-25)

162 pages.

Contains 16 attachments.

Contractual And Other Considerations Affecting Producers, Pipelines And Distributors During Current Period Of Market Demand Constraints [Outline], Michael J. Manning

Natural Gas Symposium: Contract Solutions for the Future of Regulatory Environment (March 24-25)

6 pages.