Operations Research, Systems Engineering and Industrial Engineering Commons^™

Use Of Incremental Adaptation And Habituation Regimens For Mitigating Optokinetic Side-Effects, David A. Graeber

Retrospective Theses and Dissertations

The use of incremental and repeated exposures regimens have been put forth as effective means to mitigate visually induced motion sickness based on the Dual Process Theory (DPT) (Groves & Thompson, 1970) of neural plasticity. In essence, DPT suggests that by incrementing stimulus intensity the depression opponent process should be allowed to exert greater control over the net outcome than the sensitization opponent process, thereby minimizing side-effects. This conceptual model was tested by empirically validating the effectiveness of adaptation, incremental adaptation, habituation, and incremental habituation regimens to mitigate side-effects arising from exposure to an optokinetic drum. Forty college students from …

Re-Engineering Of The Quality Assurance Process Using Work Study Methodology, Yew Hoong Chia

Student Works (2000-2009)

This project paper explores the application of Work Study methods to improve the manufacturing processes in the current semiconductor manufacturing environment. The scope of the project is narrowed down to the Quality Assurance Out-going Final Inspection (QA OFI) Gate process step at the End-Of-Line (EOL) Operations in Motorola Malaysia Sendirian Berhad. This QA OFI Gate process step had recently become a bottleneck to the total EOL operations and in need of productivity improvement. It was observed that Work Study methods were not being used extensively or applied in a systematic manner in the company being studied. Many changes were made …

Hopfield Model For Shortest Path Computation And Routing In Atm Network, Chee Weng Lee

Student Works (2000-2009)

This research focuses on the application of Hopfield neural network and Boltmann machine in solving the shortest path routing problem in the ATM network environment. Hopfield neural network and Boltzmann machine are two types of neural network which are commonly used for solving optimization problem such as the shortest path routing problem. The objectives of this research are to construct a Hopfield neural network and a Boltzmann machine for solving the shortest path routing problem in the ATM network. Both of these two types of neural network are built based on a chosen example of an A TM network. The …

The Evolution Of Manufacturing Planning And Control Systems: From Reorder Point To Enterprise Resource Planning., Patrick Rondeau, L. A. Litteral

Scholarship and Professional Work - Business

Manufacturing planning and control (MPC) systems have existed since the earliest days of the industrial revolution. To gain a historical perspective, it is useful to look at the evolution of these systems. Five major stages were involved: reorder point (ROP) systems, materials requirement planning (MRP) systems, manufacturing resource planning (MRP-II) systems, MRP-II with manufacturing execution systems (MES), and enterprise resource planning systems (ERP) with MES. When examined in detail, each stage represents the next logical step in manufacturing philosophy and technological innovation over the preceding stage.

A K-Out-Of-N Reliability System With An Unreliable Server And Phase Type Repairs And Services: The (N, T) Policy, Srinivas R. Chakravarthy, Achyutha Krishnamoorthy, P. V. Ushakumari

Industrial & Manufacturing Engineering Publications

In this paper we study a k-out-of-n reliability system in which a single unreliable server maintains n identical components. The reliability system is studied under the (N,T) policy. An idle server takes a vacation for a random amount of time T and then attends to any failed component waiting in line upon completion of the vacation. The vacationing server is recalled instantaneously upon the failure of the Nth component. The failure times of the components are assumed to follow an exponential distribution. The server is subject to failure with failure times exponentially distributed. Repair times of the component, fixing times …

Attitudes And Perceptions Regarding Internet-Based Electronic Data Interchange In A Public Organization In Saudi Arabia, Abdulrahman S. Al-Zumaia

Dissertations and Theses @ UNI

This study examined the attitudes and perceptions of staff members and administrators in the General Directorate for Private Institutes & Centers (GDPI&C), Training institutes, and Centers in Saudi Arabia toward Internet-based Electronic Data Interchange (I-EDI) in a public organization. A survey was conducted of a group of GDPI&C members and randomly selected Institutes and Centers. The 339 respondents participated anonymously by providing demographic information and completing the attitudes and perceptions section of I-EDI questionnaire. The survey response rate was 82.6%.

An attitude survey was distributed to staff members, administrators, and faculty members in the Saudi Arabian GDPI&C, Training Institutes, and …

Fulfilling The Bargain: How The Science Of Ergonomics Can Inform The Laws Of Workers’ Compensation, Jason M. Solomon

Faculty Publications

In the last decade, cumulative trauma disorders have become a significant percentage of reported workplace injuries and litigated workers'compensation claims. Arising from the accumulated impact of daily work activities on the body, these injuries do not fall neatly within "disease" categories which comprise workers' compensation laws. As a result, courts and legislatures have struggled to properly evaluate workers' compensation claims for these injuries. This Note looks at the legal treatment of cumulative trauma injuries in light of the "original bargain" of workers' compensation, where workers give up a tort remedy against their employers in exchange for guaranteed, but limited, compensation …

A Framework For The Implementation Of An Iso 9000 Based Certification Program For Printed Circuit Board Manufacturers, Adam Y. Maamoun

Retrospective Theses and Dissertations

ISO 9000:2000 is the newest version of the ISO 9000 family of standards. Unlike the 1994 version, it does not distinguish between servicing, testing and designing standards. It emphasizes quality improvement rather than quality control and briefly explains how to implement the Plan-Do-Check- Act (PDCA) cycle for improvement and the use of statistical techniques to improve the quality of process and product instead of controlling the quality of the output. The thesis explains why companies need to be certified and how to implement quality improvement programs.

The objective of this thesis is to provide generic certification guidelines for printed circuit …

Use And Effectiveness Of Decision Support Systems (Dss): Study Of The Saudi Private Sector, Ibrahim A. Alhunaishel

Dissertations and Theses @ UNI

In the industrialized world today, management is characterized by extensive use of computers to manage rapid change, information overload, and complex decision-making. Literature suggests that Decision Support Systems, computer packages offering information retrieval, problem-structuring models, decision alternatives, and other types of decision support, are effective extensions of human decision-making and offer substantial benefits to organizations utilizing them.

In spite of overwhelmingly positive reviews for DSS, empirical literature has produced inconsistent results regarding DSS effectiveness, and definitions of “effectiveness” and of DSS itself are varied and sometimes contradictory. Distinguishing DSS from MIS (management information systems) and other types of managerial computer …

Guidelines For Using Process Mapping To Aid Improvement Efforts, Paul Savory, John R. Olson

Department of Industrial and Management Systems Engineering: Faculty Publications

Process mapping is an easy-to-visualize method for people to analyze and agree on the most efficient routes for reengineering or improving a process. It aids in determining redundant tasks, uncovering hidden interactions between processes and people, and focusing on the processes that serve customers, improve quality, and generate income. This paper presents guidelines for using process mapping as an improvement tool. It is based on the authors’ experiences in aiding a variety of healthcare, service, and manufacturing companies.

Combining Activity-Based Costing With The Simulation Of A Cellular Manufacturing System, Paul Savory, Robert Williams, Rodney Rassmuseun

Department of Industrial and Management Systems Engineering: Faculty Publications

This paper presents an integrated simulation and activity-based management approach for determining the best sequencing scheme for processing a part family through a manufacturing cell. The integration is illustrated on a loop or U-shaped manufacturing cell and a part family consisting of four part types (A, B, C, and D). Production requirements for the cell demand that part batches be processed one type at a time. For example, all part A’s are processed until weekly demand is met, then part B’s, etc. The objective of this example is to determine the best part sequence (e.g., ABCD, DCBA or CABD). In …

Combining Activity-Based Costing With The Simulation Of A Cellular Manufacturing System, Paul Savory, Robert Williams, Rodney Rassmuseun

Department of Industrial and Management Systems Engineering: Faculty Publications

Discrete-event simulation is one of the most effective techniques for analyzing a manufacturing system. Unfortunately, little attention is given to using simulation models to estimate the economic impact of a proposed system configuration. This paper defines how activity-based costing (ABC) concepts can be incorporated into a discrete-event simulation model. Special emphasis is on demonstrating how decision making can be aided by having the simulation create a detailed “Bill of Activity” describing costs associated with manufacturing a part. The integration of ABC and simulation is illustrated by evaluating the impact of a proposed manufacturing cell configuration. The additional costing information aids …

A Model To Evaluate The Effect Of Organizational Adaptation, Holly A. H. Handley, Alexander H. Levis

Engineering Management & Systems Engineering Faculty Publications

When an organization’s output declines due to either internal changes or changes in its external environment, it needs to adapt. In order to evaluate the effectiveness of different adaptation strategies on organizational per- formance, an organizational model composed of individual models of a five stage interacting decision maker was designed using an object oriented design approach and implemented as a Colored Petri net. The concept of entropy is used to calculate the total activity value, a surrogate for decision maker workload, based on the functional partition and the adaptation strategy being implemented. The individual decision maker’s total activity is monitored, …

A Study Of Financial Analysis Expectations And Practices In The Engineering Management Workplace, Paul Kauffmann, Resit Unal, Andres Sousa-Poza, William Peterson

Engineering Management & Systems Engineering Faculty Publications

This paper describes an on-going study of Master of Engineering Management (MEM) students and the financial analysis related job expectations and environment they face. The objective of this effort is to provide enhanced understanding of these requirements so that instructional content in the related courses can be focused to meet these needs. To achieve this goal, the study segments findings based on a range of organizational and job level characteristics to identify critical differences in the financial work environment and the financial tools that are employed. Preliminary findings are discussed in this paper and contrasts between public and private sector …

Incorporating Heterogeneity In Command Center Interactions, Holly A. H. Handley, Alexander H. Levis

Engineering Management & Systems Engineering Faculty Publications

One of the many complexities of multinational coalition operations stems from differences in culture, military procedures, and command and control processes between the cooperating command centers. These differences can influence the interactions between decision makers of different command centers and can affect the outcome of the coalition operation. A coalition model, composed of individual models of the five-stage interacting decision maker model, was used in a virtual experiment. The subjective parameters included in the decision maker model can be any attribute that characterizes the heterogeneity of the decision makers. In this case, the parameters of power distance and uncertainty avoidance …

Levels Of Interoperability In Coalition Systems, Holly A. H. Handley, Alexander H. Levis, Michel Bares

Engineering Management & Systems Engineering Faculty Publications

Systems of different command centers that are brought together in a coalition operation must have some level of interoperability in order to work together. Bares [2000] has introduced a formalism of three interoperability domains that describe the ability of the systems to define their own level of interoperability within the coalition by assessing their own and the other systems’ ability to interact on actions of the coalition. The lowest domain, interconnectivity, reflects the ability to exchange messages; this level must already have been achieved in order for the systems to participate in the coalition. The second domain, interoperability, reflects a …

The Effects Of Multitasking On Quality Inspection In Advanced Manufacturing Systems, Jose A. Pesante, Robert C. Williges, Jeffrey C. Woldstad

Department of Industrial and Management Systems Engineering: Faculty Publications

Although the industrial quality inspection task has been extensively studied, the effect of multitasking on the performance of the operator in a hybrid inspection system is still unknown. The experiment described in this article compared the quality inspection performance for participants performing a single task, 3 multiple tasks, and 5 multiple tasks. The results of this research indicate that the performance of the operator in the quality inspection task while multitasking in an advanced manufacturing system will be determined by the interaction between the number of different types of defects that can be presented at the same time in the …

Advantages Of Using Fuzzy Class Memberships In Self-Organizing Map And Support Vector Machines, Sunghwan Sohn, Cihan H. Dagli

Engineering Management and Systems Engineering Faculty Research & Creative Works

The self-organizing map (SOM) is naturally unsupervised learning, but if a class label is known, it can be used as the classifier. In a SOM classifier, each neuron is assigned a class label based on the maximum class frequency and classified by a nearest neighbor strategy. The drawback when using this strategy is that each pattern is treated by equal importance in counting class frequency regardless of its typicalness. For this reason, the fuzzy class membership can be used instead of crisp class frequency and this fuzzy membership-label neuron provides another perspective of a feature map. This fuzzy class membership …

Decreasing Returns To Shareholders From Randd Spending In The Computer Industry, Del A. Mank, Halvard Nystrom

Engineering Management and Systems Engineering Faculty Research & Creative Works

This article explores the relationship between stockholder value changes and corporate research and development (RandD) spending in the computer industry. Researchers attempted to tie RandD expenditures and its various measurable effects to future results of the firms within an industry, with mixed results. They identify a positive, short-term relationship between stockholder share price movements and firm announcements of plans to increase RandD expenditures. They also show that industries with higher RandD intensities grow faster than those with low RandD intensities. However, little research is available that effectively relates RandD expenditures to future share price performance of the firms within an …

Using A Neuro-Fuzzy-Genetic Data Mining Architecture To Determine A Marketing Strategy In A Charitable Organization's Donor Database, Korakot Hemsathapat, Cihan H. Dagli, David Lee Enke

Engineering Management and Systems Engineering Faculty Research & Creative Works

This paper describes the use of a neuro-fuzzy-genetic data mining architecture for finding hidden knowledge and modeling the data of the 1997 donation campaign of an American charitable organization. This data was used during the 1998 KDD Cup competition. In the architecture, all input variables are first preprocessed and all continuous variables are fuzzified. Principal component analysis (PCA) is then applied to reduce the dimensions of the input variables in finding combinations of variables, or factors, that describe major trends in the data. The reduced dimensions of the input variables are then used to train probabilistic neural networks (PNN) to …

A Web-Based Interface For Storing And Executing Simulation Models, Paul Savory

Department of Industrial and Management Systems Engineering: Faculty Publications

The dominance of the Internet in the development of information and communication technology has made Web-based distributed solutions increasingly attractive. Apart from providing other services, the World Wide Web is being looked upon as an environment for hosting modeling and simulation applications. SIMAN is a simulation language that allows users to simulate discrete and continuous systems. In this research, a web-based interface or toolkit has been developed for storing and executing SIMAN simulation models over the Internet. This toolkit consists of a World Wide Web interface to SIMAN and a web-accessible database for storing user models. It provides users an …

The Role Of Intelligent Transportation Systems (Its) In Intermodal Air Cargo Operations, H.-S. Jacob Tsao, Asim Rizwan

Faculty Publications

If California were a nation, it would be the sixth largest economy in the world. Efficient goods movement is crucial to California’s economy. Air freight consists predominantly of high-value, time-sensitive or time-definite goods, e.g., electronic equipment, emergency shipments, overnight packages, etc. Timely delivery of air freight has been an important element of many manufacturing and service operations in California. Therefore, the air cargo industry is a vital part of the state’s economy. The objectives of this research include (a) investigating and suggesting how the public sector in California can assist the air cargo industry in providing efficient services to businesses …

The Determination Of Failure Occurring In The Stator Coil Winding Due To The Over-Voltage Using Matlab Software, Ali Reza Alavizadeh

Morehead State Theses and Dissertations

A thesis presented to the faculty of the College of Science & Technology at Morehead State University in partial fulfillment of the requirements for the degree of Master of Science in Vocational Education & Technology by Ali Reza Alavizadeh on December 1, 2000.

Vehicle Routing For Milk Procurement, Janat Shah

IIMB Management Review

In a typical co-operative dairy, one of the significant operating costsunder the control of the management is the cost of milk collectionand transportation. (Exhibit 1 shows the typical cost structure of adairy) The dairy under study picked up milk from 500-800 pick uppoints (nodes) twice a day. The vehicle routes were decided manu-ally keeping in mind the peak load expected at the nodes during thecoming year. The dairy had about 50 odd routes, each route cover-ing an average of 15 nodes. Usually dairies do not own the ve-hicles but use transport contractors who enter into an annual con tract with …

Product-Mix Optimiser For An Integrated Steel Plant, Goutam Dutta, Gopal P Singh, P N Roy

IIMB Management Review

Optimal utilisation of constrained resources is one of the most important problems in the area of operations management. The determination of optimal productmix is an extremely difficult task for an organisation producing multiple products in multiple stages, sharing a set of common plant resources and experiencing a fluctuating market over time. In the absence of a quick method to determine optimality under changing conditions, plant managers have to make decisions based on their experience and intuition. 

Application Of Or To Management Practice: An Introduction, H K Lakshman Rao

IIMB Management Review

Customer dissatisfaction with products and services, long queues at hospitals and railway stations, stock out/excess stock situations, overflowing solid waste bins at street corners, delayed deliveries and time lag in new product development, steeply increasing project costs, high rates of wastage in the manufacturing process these are among the numerous instances indicating the lack of systems approach and inadequate appreciation of Operations Research (OR) methods in the Indian management and administrative network scenario.

Acuta Enews December 2000, Vol. 29, No. 12

ACUTA Newsletters

In This Issue

UConn Wins in Court

ACUTA EVENTS

Spotlight on Volunteers

DC Update

Board Report

Higher Education and Truth-in-Billing

Web Site Recognition

Welcome New Members

Positions Available

The Pilgrim's Progress: Operations Research In Queuing, G Raghuram

IIMB Management Review

Good management practice is synonymous with applying operations research (OR). Both imply a systematic approach beginning with clarity in problem definition, understanding the objectives and constraints, characterising the alternatives (these three steps constitute  model building), evaluating (analysing) them and finally selecting an alternative for implementation. In addition to this basic methodology, there is also an implication of a quantitative basis to the extent possible. It is this quantitative basis which lends to the common perception that good management practice is much larger than OR

Applications Of Or In The Indian Context, R Sankar, Muthulingam Suresh

IIMB Management Review

Operations Research (OR) originated in England during World War II. The first applications aimed at improving the operational efficiency of the radar defence systems deployed by the Royal Air Force. Very soon thereafter, OR methods and techniques were applied successfully to the resolution of complex industrial and commercial problems in areas such as scheduling, inventory management, strategic planning, resource allocation and transportation.

Computer-Based Methods For Constructing Two-Level Fractional-Factorial Experimental Designs With A Requirement Set, Steven L. Forsythe

Theses and Dissertations

This dissertation developed four methodologies for computer-aided experimental design of two-level fractional factorial designs with requirement sets (DOE/RS). The requirement sets identify all the experimental factors and the appropriate interaction terms to be evaluated in the experiment. Taguchi graphs and similar manual methods provide techniques for solving the DOE/RS problem. Unfortunately, these methods are limited because they become difficult to use as the number of factors or interaction terms exceeds ten. This research showed that the DOE/RS problem belongs to a class of difficult-to-solve problems known as NP-Complete. It is the combinatorial nature of NP-Complete problems that causes them to …