Operations Research, Systems Engineering and Industrial Engineering Commons^™

A Simulation Analysis Of Factors Influencing The Flexibility Of Cellular Manufacturing, Manocher Djassemi

Industrial Technology and Packaging

The performance of cellular manufacturing (CM) systems in a variable demand and flexible workforce environment has been examined using simulation modelling. Discrepancies between academicians and practitioners' findings with respect to flexibility and uneven machine utilization in CM systems are discussed. The views of two parties were incorporated in simulation models to rectify the existing discrepancies. While the results of this study confirm the previous findings of academicians regarding the deterioration of the performance of CM in a variable product mix situation, it appears that those results may be significantly influenced by considering a flexible workforce. The simulation results show that …

The Effect Of Level Of Automation And Operator-To-Vehicle Ratio On Operator Workload And Performance In Future Uav Systems, Ryan J. Wasson

Master's Theses - Daytona Beach

The military intends to increase the number of UAVs in service while at the same time reducing the number of operators (Dixon, Wickens & Chang; 2004). To meet this demand, many of the current UAV operator functions will need to be automated. How automation is applied to modern systems is not fixed. Levels of automation exist along a continuum from fully manual to fully automatic. Two proposed levels of automation for future UAV systems are Management by Consent (MBC), where the operator selects the task to be executed, and Management by Exception (MBE), where the computer selects the task to …

Acuta Enews April 2005, Vol. 34, No. 4

ACUTA Newsletters

ln This Issue

Nominate Now for ACUTA Ruth A. Michalecki Leadership Award

From the President .................................Tamara Closs, Georgetown Univ,

Tech Talk: Make Sure Your VolP Equipment Stays Cool ........................... Kevin Tanzillo, Dux PR

Web Tip: Listserv & Resource Library ....................... Aaron Fuehrer, ACUTA Computer Services Mgr.

To Wire or Not to Wire New Construction............... Geoff Tritsch, Compass Consulting lntl. lnc.

Caller lD Spoofing: Another Kind of identity Theft....... Corinne Hoch, Nuala Hallinan, Columbia Univ.

DC Update......................... Whitney Johnson, Retired, No. Michigan Univ.

Board Report............................... Carmine Piscopo, Providence College

Welcome New Members

ACUTA Online Press Room

Quantifying Vulnerability To Critical Infrastructure, Barry Charles Ezell

Engineering Management & Systems Engineering Theses & Dissertations

Military and civilian leaders have the responsibility to protect our Nation's critical infrastructure, communities, and symbols of American power from terrorists, home and abroad, as well as from natural disasters. To this end, assessments are conducted to reduce vulnerability. The literature offers multiple definitions of vulnerability and measurement has not been adequately addressed. Thus, the purpose of this research has been to develop and deploy a systems-based model that quantifies vulnerability to critical infrastructure. This research defines critical infrastructure vulnerability as a measure of the susceptibility of critical infrastructure to threat scenarios. Vulnerability is a function of (1) threat scenario, …

A Method For Classification Analysis On Simultaneous Product Defects, Jason S. Trahan

Masters Theses

There have been many advancements that share similar tools and techniques that help reduce the manufacture of nonconformities. These include computer-aided analysis, design reviews, total quality management, multivariate analysis, process monitoring and control, and root cause analysis to mention a few.

This work details the methodology developed for manufacturing companies to predict attribute defects. Injection molding was used to demonstrate the proposed methodology. Data were collected on a variety of tool design and construction attributes thought to affect the performance of a tool. The independent variables consisted of categorical and numerical data types. The dependent variable was a nominal four-tuple …

Modeling Multilevel Supply Chain Systems To Optimize Order Quantities And Order Points Through Mathematical Models, Discrete Event Simulation And Physical Simulations, Alok K. Verma

Mechanical & Aerospace Engineering Theses & Dissertations

Managing supply chains in today's distributed manufacturing environment has become more complex. To remain competitive in today's global marketplace, organizations must streamline their supply chains. The practice of coordinating the design, procurement, flow of goods, services, information and finances, from raw material flows to parts supplier to manufacturer to distributor to retailer and finally to consumer requires synchronized planning and execution. Efficient and effective supply chain management assists an organization in getting the right goods and services to the place needed at the right time, in the proper quantity and at acceptable cost. Managing this process involves developing and overseeing …

A Systems Methodology For Measuring Operational Organization Effectiveness: A Study Of The Original Equipment Computer Manufacturing Industry, 1948 To 2001, Teddy Steven Cotter

Engineering Management & Systems Engineering Theses & Dissertations

Optimizing operational organizational effectiveness is the central, although often unstated, goal of engineering management and systems engineering research and applications. Two fundamental problems remain to be addressed in pursuit of this goal. First, despite over fifty years of research in various disciplines, there is still no universally accepted definition of organizational effectiveness. Second, no methodology exists to identify the domains, dimensions, and determinants of operational organizational effectiveness and dynamically model operational organizational effectiveness within a given population.

This research synthesizes a systems engineering methodology for identifying the domains, dimensions, and determinants of and dynamically modeling operational organizational effectiveness for an …

Development Of A Statistical Model For Process Control To Eliminate Sink Marks In Injection Molded Products, Kurt Frederick Hayden

Masters Theses

Customer demands for high-quality, defect-free injection-molded products are ever increasing. In order to satisfy these quality requirements, much effort is spent monitoring and controlling variable data such as cycle time, part weight, and dimensions. Attribute defects such as sink or splay are often overlooked in the development of process control systems. However, customers reject products because of these attribute defects. Industrial control systems based upon process variables and product design variables can detect conditions that may result in the molding of products with attribute defects. The systems can then correct the process prior to the molding of these defective products. …

Development Of Integrated Process Simulation System Model For Spent Fuel Treatment Facility (Sftf) Design: Quarterly Progress Report January 1-March 31, 2005, Yitung Chen, Sean Hsieh

Separations Campaign (TRP)

The Advanced Fuel Cycle Initiative (AFCI) and Transmutation Research Program-University Participation Program (TRP-UPP) supported by Department of Energy of the United States have been developing many important technologies for the transmutation of nuclear waste to address long-term disposal issues. While successfully embedding AMUSE module into a dedicated System Engineering Model (TRPSEMPro), developed by the Nevada Center for Advanced Computational Methods (NCACM) at the University of Nevada-Las Vegas collaborating with Argonne National Laboratory (ANL), ANL is interested in further simulating the Light Water Reactor (LWR) Spent Fuel Treatment Facility (SFTF) combining commercial process simulation and analysis packages and core calculation of …

F-111 Systems Engineering Case Study, Air Force Center For Systems Engineering, G. Keith Richey

AFIT Documents

The systems engineering lessons from the F-111 program will facilitate learning by emphasizing practical applications and resulting outcomes to the current processes and tools used on today s programs. The student will understand the long-term consequences of systems engineering as implemented on the F-111 and its effect on cost, schedule, and operational effectiveness. The reader can then postulate outcomes of alternate decisions at the program/system level.

Acuta Enews March 2005, Vol. 34, No. 3

ACUTA Newsletters

In This Issue

From ACUTA Headquarters............................ Jeri A. Semer, CAE, ACUTA Executive Director

Did You See the Post?

Nominate for ACUTA Board of Directors

Tech Talk: Holographic Storage................... Kevin Tanzillo, Dux Public Relations

Abandoned Cable May take Unexpected Bite.................. Frank Bisbee, www.wireville.com

Board Report.................... Carmine Piscopo, Providence College

ACUTA Member Sites to See

Web Tip: Questions, Anyone?....................... Aaron Fuehrer, ACUTA Computer Svcs. Mgr.

DC Update..................... Whitney Johnson, Retired, Northern Michigan Univ.

Welcome New Members

ACUTA Online Press Room

Status Of Department Of Defense Architecture Framework (Dodaf) Implementation Within The Aeronautical Systems Center (Asc), Chad A. Millette

Theses and Dissertations

The purpose of this research was to identify the current status of the use of the Department of Defense Architecture Framework (DoDAF) systems architecture products within the Aeronautical Systems Center (ASC) program offices. There are regulatory requirements dictating the creation of DoDAF products as annexes to programmatic documentation, such as the Joint Capabilities Integration Development System (JCIDS) requirement for systems architectures as annexes for acquisition milestone decision documentation. In addition, the DoDAF itself identifies several products as being highly applicable for the development of acquisition strategies. This thesis investigated the use of systems architectures, and particularly DoDAF products, within the …

Medical Devices, Support Networks, And Their Vulnerabilities: A Case Study Of The Integration Of Medical Networks Into The Air Force Information Network, Paul G. Oleksiak

Theses and Dissertations

With the implementation of "one Air Force, one network" under way it is important to look at how the Air Force plans to incorporate the medical field and its unique systems, networks, and mission. The medical field presents distinctive problems not seen in other areas. Open network vulnerabilities in the medical information systems not only pose a problem for the individual, but to the military service also. Possible security holes provide both access to vital military & personal information (end strength numbers, current status of personnel, social security), and a door way into the "network". Intruders now can possibly access …

The Feasibility Of The U.S. Air Force Mandating The Exclusive Use And Purchase Of Forest Stewardship Council Certified Wood And Paper Containing 100% Post Consumer Content, Silinda Johnson

Theses and Dissertations

The Resource Conservation and Recovery Act required federal agencies to purchase products with the highest recovered content (or post-consumer content in the case of paper) as practicable. The Office of Federal Procurement Policy required all executive agencies to give preference in their procurement programs to products that conserve natural resources and protect the environment. These requirements necessitate that the Air Force consider purchasing 100% post-consumer content (PCC) paper and Forest Stewardship Council (FSC) certified wood because of their environmentally preferable attributes. This study compared the availability, performance standards, and prices of 100% PCC paper to 30% PCC paper and FSC-certified …

A Study To Determine Damage Assessment Methods Or Models On Air Force Networks, Lisa S. Thiem

Theses and Dissertations

Damage assessment for computer networks is a new area of interest for the Air Force. Previously, there has not been a concerted effort to codify damage assessment or develop a model that can be applied in assessing damage done by criminals, natural disasters, or other methods of damaging a computer network. The research undertaken attempts to identify if the Air Force MAJCOM Network Operations Support Centers (NOSC) use damage assessment models or methods. If the Air Force does use a model or method, an additional question of how the model was attained or decided upon is asked. All information comes …

Performance Based Service Acquisition: A Quantitative Evaluation Of Implementation Goals And Performance In The United States Air Force, Dylan D. Pope

Theses and Dissertations

In an attempt to maximize cost savings in the rapidly growing services sector, the DoD established a Performance Based Service Acquisition (PBSA) strategy that focuses on evaluating contractor performance based on their ability to meet desired outcomes rather than the means to which the outcomes are obtained. In April 2000, Dr. Gansler, then Under Secretary of Defense for Acquisition, Technology and Logistics, mandated that 50 percent of all eligible service acquisitions be awarded using PBSA methods by FY 2005. Since then very little research has been focused on USAF implementation of PBSA and the progress and attainment of the PBSA …

An Analysis Into The Effectiveness Of Aircraft Maintenance Under The Combat Wing Structure, Derrick R. Barthol

Theses and Dissertations

Organizational structure builds the foundation from which organizations operate. To gain full potential of structural efficiencies in the current operating environment, public and private firms are continually modifying their organizational structure. The U.S. Air Force is no different and underwent its most recent reorganization in the fall of 2002 replacing the post-Gulf War format of the previous decade. Air Force leadership needs to understand how well the current structure is performing at achieving its intended objectives. This research investigates the effectiveness of the recent change to Air Force organizational structure on aircraft maintenance performance through an analysis of aircraft maintenance …

Minimizing Security Forces Response Times Through The Use Of Facility Location Methodologies, Michael C. Dawson

Theses and Dissertations

Since the events of September 11, 2001, security for the nation's Intercontinental Ballistic Missile force has become a prominent concern for personnel in the highest levels of government. This has resulted in many physical security upgrades and new methods to counter hostile activities. This research seeks to find the optimal placement for one layer of the security net protecting these crucial assets, the daily-deployed security forces Fire Teams. The problem of finding the optimal placement for these forces is modeled as a facility location problem. Three of the methods of locating facilities available in the literature are selected to solve …

Comparing Management Approaches For Automatic Test Systems: A Strategic Missile Case Study, William C. Ford

Theses and Dissertations

From 1980 to 1992, the DoD spent over $50 billion acquiring Automatic Test Systems (ATS) used to test weapon systems. At that time, procuring unique ATS to support single weapon systems was the norm. In 1994, the DoD made a dramatic change to their ATS acquisition policy; common ATS that supported multiple weapon systems was preferred over ATS tailored to support a single weapon system. Expected benefits of this new policy included: more reliable equipment, increased supportability, decreased cost, smaller logistics footprint, and decreased manning. To date, the common ATS initiative has garnered little support AF-wide due to lack of …

A Multiple-Case Analysis Of Lean Six Sigma Deployment And Implementation Strategies, Peter M. O'Rourke

Theses and Dissertations

Lean and Six Sigma are recent developments in continuous improvement methodology that have been popularized by several high-profile companies. The success and complementary nature of these methodologies has led to their combination into a single methodology, commonly called Lean Six Sigma or Lean Sigma. Although there is considerable literature available and many consultants involved with Lean Six Sigma, very little published research addresses the practical experiences of companies that have implemented Lean Six Sigma. The research question for this research is: How and why are certain private sector implementations of Lean Six Sigma successful or unsuccessful? The investigative questions further …

Determining Pacaf Transportation Alternatives To The General Purpose Vehicle, Andrew H. Pate

Theses and Dissertations

Vehicle fleets under gird the mission of Air Force bases. Under funding for vehicle replacement requirements raised concerns and has led to purchasing alternative vehicles classified as equipment items to supplement budget shortfalls. In order to effectively use funds and meet mission requirements, Pacific Air Force (PACAF) commanders need an adjustable multifactor decision tool that will allow them to make an informed purchasing decision from among appropriately classified equipment item vehicles. This research will discuss existing regulatory restrictions to alternative transportation purchases, consider available alternative vehicles, and determine the attributes important to vehicle purchases. A review of current Air Force …

Air Force Jp-8 Fuel Distribution System: A Statistical Analysis To Determine Where And When To Sample, Eric J. Heath

Theses and Dissertations

The Air Force Petroleum Office at Wright-Patterson Air Force Base, Ohio collects JP-8 sampling data, but this data doesn't undergo analysis to determine the health of the base-level JP-8 fuel distribution system. Commanders possess no known confidence level when assessing base-level fuel health. Therefore, the objective of this research is to assess Air Force base-level fuel sampling data to determine the base-level sampling point that ensures a quality and healthy product at the aircraft. Also, this research seeks to identify how often correlation sampling should take place. Sample test pass rates are analyzed from three locations, receipt, storage, and vehicles/aircraft, …

Optimization Model For Base-Level Delivery Routes And Crew Scheduling, Young-Ho Cha

Theses and Dissertations

In the U.S. Air Force, a Logistic Readiness Squadron (LRS) provides material management, distribution, and oversight of contingency operations. Dispatchers in the LRS must quickly prepare schedules that meet the needs of their customers while dealing with real-world constraints, such as time windows, delivery priorities, and intermittent recurring missions. Currently, LRS vehicle operation elements are faced with a shortage of manpower and lack an efficient scheduling algorithm and tool. The purpose of this research is to enhance the dispatchers' capability to handle flexible situations and produce "good" schedules within current manpower restrictions. In this research, a new scheduling model and …

Analysis Of Online-Delaunay Navigation For Time Sensitive Targeting, David Chow

Theses and Dissertations

Given the drawbacks of leaving time-sensitive targeting (TST) strictly to humans, there is value to the investigation of alternative approaches to TST operations that employ autonomous systems. This paper accomplishes five things. First, it proposes a short-hop abbreviated routing paradigm (SHARP) - based on Delaunay triangulations (DT), ad-hoc communication, and autonomous control - for recognizing and engaging TSTs that, in theory, will improve upon persistence, the volume of influence, autonomy, range, and situational awareness. Second, it analyzes the minimum timeframe need by a strike (weapons enabled) aircraft to navigate to the location of a TST under SHARP. Third, it shows …

On The Use Of Surrogate Functions For Mixed Variable Optimization Of Simulated Systems, John E. Dunlap

Theses and Dissertations

This research considers the efficient numerical solution of linearly constrained mixed variable programming (MVP) problems, in which the objective function is a black-box stochastic simulation, function evaluations may be computationally expensive, and derivative information is typically not available. MVP problems are those with a mixture of continuous, integer, and categorical variables, the latter of which may take on values only from a predefined list and may even be non-numeric. Mixed Variable Generalized Pattern Search with Ranking and Selection (MGPS-RS) is the only existing, provably convergent algorithm that can be applied to this class of problems. Present in this algorithm is …

Optimal Maintenance For Stochastically Degrading Satellite Constellations, Timothy J. Cook

Theses and Dissertations

This thesis develops a methodology to determine an optimal policy for maintaining a satellite constellation that degrades over time. Previous work has developed a methodology to compute an optimal replacement policy for a satellite constellation in which satellites were viewed as binary entities, either operational or failed. This research extends the previous models by developing an optimal maintenance policy for satellite constellations in which each satellite may operate in a finite number of degraded states. The constellation is assumed to consist of a finite number of satellites, each with a finite number of functions with distinct failure mechanisms. Assuming each …

Modeling And Analysis Of Clandestine Networks, Clinton R. Clark

Theses and Dissertations

Since Sept. 11, 2001, there has been great interest in the military and intelligence communities in using Social Network Analysis (SNA) to support the disruption and destruction of global terrorist networks. SNA results, however, tend to be descriptive and are limited due to the lack of advantageous properties of the relationship measures applied to the arcs in a social network. Further, SNA techniques generally focus on a single network context while real relationships are based in multiple contexts. This thesis develops a new proxy measure of pair-wise potential influence between members of a network, a Holistic Interpersonal Influence Measure (HIIM). …

An Investigation Of The Effects Of Correlation And Autocorrelation In Classifier Fusion With Non-Declarations, Frank M. Mindrup

Theses and Dissertations

Air Force doctrine requires reliable and accurate information when striking targets. Further, this doctrine states that fusion should be utilized whenever possible to ensure the best possible information is conveyed; there is no specific guidance as to how to fuse this information. This thesis extends the research found in Leap, Bauer, and Oxley (2004) to include a non-declared class. The Identification system operating characteristic (ISOC) was adapted to allow for non-declarations both at the individual sensor level as well as the fused output level. A probabilistic neural network (PNN) was also used as a fusion technique. A cost function was …

Optimal Sampling Of A Chemical Hazard Area, Jennifer R. Plourde

Theses and Dissertations

This thesis proposes a methodology for optimally sampling a chemical hazard area subsequent to a chemical weapons attack. The objective is to identify the maximum number of areas that no longer require protective gear for safe operations. We model the area as an undirected graph and employ network analysis techniques to provide a methodological framework for identifying an optimal sampling sequence within a fixed time limit. We propose four models that characterize the secondary vapor concentrations: i) static and deterministic, ii) static and stochastic, iii) dynamic and deterministic, and iv) dynamic and stochastic. Comparisons of the static cases and their …

Strategic Airlift En Route Analysis And Considerations To Support The Global War On Terrorism, Michael C. Sere

Theses and Dissertations

The Global War on Terrorism has mandated the need for additional global en route airfields. En route airfields consist of bases that are strategically located at intermediate locations between the Continental United States and the intended theater of operations. These airfields serve as refueling, crew staging, or maintenance stops for strategic airlift aircraft flying transoceanic routes. The focus of this study is to examine concepts to meet this need and to address important aspects that should be considered in devising new en route strategies. Based on various important factors associated with potential en route airfields, a goal programming methodology was …