Operations Research, Systems Engineering and Industrial Engineering Commons^™

The Dielectric Behavior Of Polycrystalline Ferroelectric Films With Fiber Textures, Quangen Du, Jiangyu Li, William Nothwang, Melanie W. Cole

United States Army: Publications

We consider the effects of crystallographic symmetry, texture, and internal strain on the dielectric properties of polycrystalline ferroelectric thin films with fiber textures, including spontaneous polarization, coercivity, dielectric constant, dielectric tunability, and strain-induced phase transition, by combining Landau–Ginzburg–Devonshire phenomenological theory for ferroelectrics with the micromechanics theory for polycrystalline thin films. Cubic and tetragonal BaxSr1_xTiO3 (BST) films with [001] fiber texture, and cubic and rhombohedral BST films with [111] texture are considered. The results show that for [001]-textured film compressive strain enhances the spontaneous polarization, coercivity, and tunability while it decreases the dielectric constant; for [111]-textured film the effects are the …

Proposed Evaluation Of Switchgrass Selections For Caddo House Construction, Charles Allen, Sara Thames, Jim Grafton, Bill Welton, Lorene Williams, Katina Mcclure, Darryl Monteau, Phil Cross, Andrew Hamblin, William Meyer

United States Army: Publications

The Caddo Indian tribe’s range was northwest Louisiana, northeast Texas, eastern Oklahoma, western Arkansas, and southwest Missouri. Historical records indicate the use of native switchgrass (Panicum virgatum) in the construction of houses. The frame and stringers for the houses were wood but the entire covering was bundles of switchgrass. In 2005, Fort Polk personnel and faculty and students at Haskell Indian Nations University in Lawrence, Kansas initiated a joint monitoring effort of biological (density, height, seed production), cultural, and other characteristics of switchgrass. Both groups have ongoing field and greenhouse plots with selections of switchgrass from throughout the …

A Study Of The Impact Of Prognostic Errors On System Performance, Mauricio Carrasco

Inquiry: The University of Arkansas Undergraduate Research Journal

Condition-based maintenance is growing in popularity as a means of improving equipment maintenance efficiency. Whether it be the maintenance of an airplane, a computer system, or any type of physical system, the prognostic tools associated with condition-based maintenance are subject to statistical error. These errors can lead to unnecessary preventive maintenance due to underestimation of system remaining life and unnecessary system failures due to overestimation of system remaining life. What is not clear is if these statistical errors outweigh the benefits of a condition-based maintenance policy. This study attempts to address this concern through the evaluation and comparison of three …

Class Exercise For Assessing Abilities And Providing A Structure For A Course, Paul Savory

Department of Industrial and Management Systems Engineering: Instructional Materials

I developed this class exercise to assess students abilities and to highlight the range of questions/issues that they will learn in my IMSE 440/840 (Discrete Event Computer Simulation) course. I draw a picture of the case scenario for students and explain the system’s operation to them. I then ask that they complete the questions regarding the system and/or how they would analyze it. Following class, I develop a summary of the range of student answers. At the next class session, I share the range of answers and share what my answers would be and how these questions/topics relate to what …

Enterprise Resource Planning Survey Of Korean Manufacturing Firms, Lee Taehyung, Young Moon, Lee Heeseok

Mechanical and Aerospace Engineering - All Scholarship

Enterprise Resource Planning (ERP) systems are packaged software designed to integrate and optimise the business processes of an enterprise. The ERP systems have been embraced by industry as a de facto solution to integrate their business functions. The adoption of the ERP concept is a truly global phenomenon. This paper reports a recently completed survey study on Korean manufacturing firms. The study used the same survey questionnaires used in two previous surveys done on US and Swedish manufacturing firms. Our objective is to determine the extent of adoption of the ERP system in the Korean manufacturing firms, their motivations, implementation …

Analyzing Faulty Knowledge Systems In Project-Based Environments: An Empirical Investigation In A R&D Organization, Rafael E. Landaeta, Cesar Ariel Pinto, Timothy G. Kotnour, William R. Peterson

Engineering Management & Systems Engineering Faculty Publications

This investigation contributes a framework of the relationships among the faulty elements of a knowledge system in a project-based organization. The framework was developed during an applied research project at a R&D organization. A knowledge system can be defined as a series of inputs, processes, and outputs that interact with each other with the purpose of enhance the performance and capabilities of an organization or work unit through knowledge. The framework was developed using literature, our experience as applied researchers, and data collected from members of a R&D organization. Data was collected through a survey, interviews, and group meetings. The …

An Integrated Framework For Modeling And Simulation Of The U.S. Southern Border: A Border Patrol Perspective, Shannon R. Bowling, Ghaith Rabadi, Charles Keating

Engineering Management & Systems Engineering Faculty Publications

Border Security is a complex system consisting of many interrelated components that must function as a whole in order to be effective. The efficacy of border security is dependent on several independent agencies; these include U.S. Customs and Border Patrol (CBP), Immigration and Customs Enforcement (ICE), the Department of Justice (DOJ), state and local law enforcement, and many others. Border security is not only a function of how well each of the agencies perform individually but also how well they interact to accomplish a goal. This paper attempts to model border security from a Border Patrol (BP) perspective using discrete …

A Dynamic Heuristic For The Stochastic Unrelated Parallel Machine Scheduling Problem, Jean-Paul Arnaout, Ghaith Rabadi, Ji Hyon Mun

Engineering Management & Systems Engineering Faculty Publications

This paper addresses the problem of batch scheduling in an unrelated parallel machine environment with sequence dependent setup times and an objective of minimizing the total weighted mean completion time. The jobs' processing times and setup times are stochastic for better depiction of the real world. This is a NP-hard problem and in this paper, new heuristics are developed and compared to existing ones using simulation. The results and analysis obtained from the computational experiments proved the superiority of the proposed algorithm PMWP over the other algorithms presented.

Development Of Integrated Process Simulation System Model For Spent Fuel Treatment Facility (Sftf) Design, Yitung Chen, Sean Hsieh

Separations Campaign (TRP)

The overall goal of this project is the creation of a framework that combines all the strengths of AMUSE’s complicated calculations, well-established commercial system process packages, and TRPSEMPro’s flexible parameter optimization modules. Development of the process simulation code can be done using the solvent extraction process at Argonne National Laboratory in collaboration with the UNLV Nevada Center for Advanced Computational Methods.

The major objectives are the following:

• Develop a framework for simulating the Spent Fuel Treatment Facility (SFTF) process using AMUSE code, commercial process package, such as ASPEN-PLUS, and system engineering model.
• Develop a middleware package that can communicate between …

Effect Of Time-Based Parameters On The Agility Of A Dynamic Mpc System, A. M. Deif, W. H. Elmaraghy

Industrial Technology and Packaging

This paper presents a dynamic manufacturing planning and control (MPC) system that can maintain agility through the ability to dynamically switch between different policies due to varying market strategies. The dynamic behavior of the developed system is investigated by studying the effect of the time based parameters on responsiveness and cost effectiveness of the system reflected in the natural frequency and the damping of its different configurations. Results showed that the agility requirements are directly affected by the time based parameters of the MPC system: production lead time, capacity scalability delay, and shipment time. This resulted in a better understanding …

A Control Approach To Explore The Dynamics Of Capacity Scalability In Reconfigurable Manufacturing Systems, Ahmed M. Deif, Waguih H. Elmaraghy

Industrial Technology and Packaging

This paper presents a dynamic model and analysis for one of the major characteristics of reconfigurable manufacturing systems (RMSs) capacity scalability. The dynamic model is analyzed using its transfer function. Dynamic characteristics associated with the delay in capacity scalability and how to minimize this delay are discussed using control approaches. The problem of how to supply exact capacity in response to market changes is also examined by solving the dynamic problem of the production offset phenomenon in RMSs. The effect of work in process as a damping factor for production disturbances during capacity scalability is addressed. Finally, a general capacity …

B2b E-Marketplaces In The Airline Industry: A Study On Process Drivers And Performance Indicators, Claudia-Maria Wagner, Bernd Huber, Edward Sweeney

Practitioner Journals

No abstract provided.

Developing A New Program In Marine Engineering Technology, Anthony Dean, Gary Crossman, Alok Verma

Engineering Technology Faculty Publications

The Department of Engineering Technology, in the Batten College of Engineering and Technology at Old Dominion University, in conjunction with members of its advisory board and other industry representatives have begun a sustained effort to promote and develop a strong course of study in Marine Engineering Technology. Located in Norfolk, Virginia, Old Dominion University, and particularly the Department of Engineering Technology, is uniquely positioned to develop such a program. With strong ties to the world's largest Naval Base and superlative shipbuilding, maintenance and repair facilities, early qualitative research indicated high interest for development of such a program in support of …

Oxygen Exposure Promotes Fuel Diversity For Shewanella Oneidensis Microbial Fuel Cells, Justin C. Biffinger, Jacqueline N. Byrd, Breanna L. Dudley, Bradley R. Ringeisen

United States Navy: Publications

Miniature microbial fuel cells (mini-MFCs) were used to monitor the current generated by Shewanella oneidensis DSP10 under both anaerobic and aerobic conditions when exposed to glucose as a potential electron donor. In addition to glucose, other carbon fuels including fructose, sucrose, acetate, and ascorbic acid were also tested. When the anolyte containing S. oneidensis was grown in the presence of oxygen, power densities of 270±10, 350±20, and 120±10 W/m³ were recorded from the mini-MFC for glucose, fructose, and ascorbic acid electron donors, respectively, while sucrose and acetate produced no response. The power produced from glucose decreased considerably (≤100 W/m …

High Power Density From A Miniature Microbial Fuel Cell Using Shewanella Oneidensis Dsp10, Bradley R. Ringeisen, Emily Henderson, Peter K. Wu, Jeremy Pietron, Ricky Ray, Brenda J. Little, Justin C. Biffinger, Joanne M. Jones-Meehan

United States Navy: Publications

A miniature microbial fuel cell (mini-MFC) is described that demonstrates high output power per device crosssection (2.0 cm²) and volume (1.2 cm³). Shewanella oneidensis DSP10 in growth medium with lactate and buffered ferricyanide solutions were used as the anolyte and catholyte, respectively. Maximum power densities of 24 and 10 mW/m² were measured using the true surface areas of reticulated vitreous carbon (RVC) and graphite felt (GF) electrodes without the addition of exogenous mediators in the anolyte. Current densities at maximum power were measured as 44 and 20 mA/m² for RVC and GF, while short …

Evolution Of The Snow Area Index Of The Subarctic Snowpack In Central Alaska Over A Whole Season. Consequences For The Air To Snow Transfer Of Pollutants, A.S. Taillandier, F. Domine, W.R. Simpson, M. Sturm, T.A. Douglas, K Severin

United States Army: Publications

The detailed physical characteristics of the subarctic snowpack must be known to quantify the exchange of adsorbed pollutants between the atmosphere and the snow cover. For the first time, the combined evolutions of specific surface area (SSA), snow stratigraphy, temperature, and density were monitored throughout winter in central Alaska. We define the snow area index (SAI) as the vertically integrated surface area of snow crystals, and this variable is used to quantify pollutants’ adsorption. Intense metamorphism generated by strong temperature gradients formed a thick depth hoar layer with low SSA (90 cm² g^-1) and density (200 kg …

การปรับปรุงกระบวนงานของสำหนังานประกันสังคมโดยใช้แนวทาง ลีน ซิกซ์ ซิกมา, กาญจน์ สุนทราภา

Chulalongkorn University Theses and Dissertations (Chula ETD)

งานวิจัยฉบับนี้มีวัตถุประสงค์เพื่อปรับปรุงการกระบวนงานให้บริการของสำนักงานประกันสังคมเขต 6 โดยการหาแนวทางเพื่อลดจำนวนขั้นตอนและระยะเวลาที่ผู้ประกันตนใช้ในการรับบริการในกระบวนงานขอรับประโยชน์ทดแทนจากกองทุนประกันสังคมจำนวน 5 ประเภทงาน โดยงานวิจัยนี้ใช้แนวคิดและขั้นตอนของ ลีน ซิกซ์ ซิกมา ซึ่งประกอบด้วย การนิยามปัญหา การวัดและเก็บข้อมูลเกี่ยวกับสภาพปัญหา การวิเคราะห์หาสาเหตุของปัญหา การหาแนวทางปรับปรุงแก้ไข และการควบคุมและปรับปรุงอย่างต่อเนื่อง จากการวิเคราะห์ระบบการให้บริการพบว่าสาเหตุหลักของปัญหาเกิดจากการกำหนดขั้นตอนการให้บริการและการจัดสรรเจ้าหน้าที่ไม่เหมาะสม ดังนั้นจึงกำหนดแนวทางในการปรับปรุงระบบการให้บริการตามแนวทางลีน ซิกซ์ ซิกมาโดย 1) ออกแบบผังที่นั่งทำงานของเจ้าหน้าที่ใหม่ 2) ปรับลดและรวมขั้นตอนการทำงาน 3) ปรับปรุงการจัดการการไหลของงานเอกสาร 4) จัดสรรจำนวนเจ้าหน้าที่ให้เหมาะสมและสมดุลในแต่ละขั้นตอนการทำงาน 5) จัดการฝึกอบรมให้เจ้าหน้าที่สามารถทำงานได้หลายหน้าที่ ทั้งนี้ในขั้นตอนการจัดรูปแบบของระบบการให้บริการ และจัดจำนวนเจ้าหน้าที่ให้เหมาะสมได้ใช้วิธีการเขียนแบบจำลองเข้ามาช่วย ซึ่งพบว่าหลังจากปรับปรุงระบบการให้บริการสามารถลดจำนวนเจ้าหน้าที่ในระบบให้บริการลงได้ อีกทั้งค่าเฉลี่ยของระยะเวลาที่ผู้ประกันตนอยู่ในระบบของทั้ง 5 ประเภทงานมีค่าลดลง คือ ก่อนปรับปรุงมีค่าเฉลี่ยอยู่ในช่วง 35-45 นาทีได้ลดลงจนมีค่าเฉลี่ยอยู่ในช่วง 30.9-35.1 นาที และร้อยละของผู้ประกันตนที่ใช้เวลาในระบบเกิน 40 นาทีได้ลดลงจากร้อยละ 19-90 เหลือร้อยละ 0.71-4.9

Management Of System Of Systems Engineering: System Of Systems Engineering Requirements, Charles Keating, Andres Sousa-Poza, Samuel Kovacic

Engineering Management & Systems Engineering Faculty Publications

Traditional systems engineering focuses efforts on developing requirements that are assumed to be objective, definitive, and unwavering. However, the function, development, and utilization of requirements for System of Systems Engineering (SoSE) do not have the level of maturity or sophistication as traditional systems engineering. To avoid miscalculation of the nature and role of requirements in SoSE, a closer examination is necessary. It would be presumptuous to assume that SoSE requirements are a simple extrapolation of traditional systems engineering requirements. The purpose of this paper is to explore the nature of requirements from a SoSE perspective. This examination is concentrated in …

Heuristics And Genetic Algorithms, Michael D. Mobley, Cihan H. Dagli, David Enke

Engineering Management and Systems Engineering Faculty Research & Creative Works

Genetic algorithms are design tools used in generating optimal solutions. While they can often be shown to outperform various heuristic methods and hybrid approaches, using a combination of evolutionary algorithms and heuristic approaches can generate an optimal solution more quickly than either of the two methods independently. Our purpose is to provide an overview of genetic algorithms, to discuss the types of problems that lend themselves to being solved by genetic algorithms, and to identify heuristics that have been shown to aid genetic algorithms in their quest for optimal solutions. While the sample problems discussed in this paper are generally …

Applying The Mahalanobis-Taguchi System To Vehicle Handling, Kioumars Paryani, Elizabeth A. Cudney, K. M. Ragsdell

Engineering Management and Systems Engineering Faculty Research & Creative Works

The Mahalanobis-Taguchi system (MTS) is a diagnosis and forecasting method using multivariate data. Mahalanobis distance (MD) is a measure based on correlations between the variables and patterns that can be identified and analyzed with respect to a base or reference group. The MTS is of interest because of its reported accuracy in forecasting using small, correlated data sets. This is the type of data that is encountered with consumer vehicle ratings. MTS enables a reduction in dimensionality and the ability to develop a scale based on MD values. MTS identifies a set of useful variables from the complete data set …

Grinding Wheel Condition Monitoring With Boosted Classifiers, Fengming Tang

LSU Master's Theses

In this thesis, two data sets collected in grinding process under different cutting and wheel conditions were studied. One is the cutting forces in three directions, i.e. X, Y and Z, collected under two different cutting conditions. The other one is the acoustic emission (AE) signals collected under different wheel conditions(sharp and dull). For the goal of grinding wheel condition monitoring, the regression model with autocorrelated errors was proved to be effective and was used to extract features from signals in this study. The coefficients of the models served as the features used in the classification step that employed boosting …

Influence Of Circadian Rhythm On The Physical And Mental Performance, Maryam Muhammed Amin

LSU Master's Theses

This thesis studied the temperature circadian rhythm and its relationship with the physical and mental performance of the individuals. The objectives of this study were to determine (1) the effect of temperature circadian rhythm on the mental and physical performance, (2) whether a common oral temperature circadian rhythm pattern exists for all the participants, (3) the times of the day when the participants perform their best and worst in comparison to their highest and lowest temperatures respectively, (4) find out whether the effect of the oral temperature circadian rhythm on the physical and mental performance is different in males and …

Effect Of Overhead Drilling Support On Muscular Activity Of Shoulder, Bharat Kumar Bhogaraju Bhallam Venkata

LSU Master's Theses

This study examines the effect of an overhead drilling support and position of the arm on muscular activity of the shoulder. Five male participants simulated an overhead drilling task by using a drill in near, middle and far reach positions. Electromyographic measurements were taken from the dominant side anterior deltoid, bicep and trapezius muscles. Root mean square amplitude (RMS) of the EMG activity from these muscles was used to determine the load on the muscular system. The participants used a subjective rating scale to evaluate the overhead support stand and holding position. The results demonstrate that the overhead support stand …

Effect Of Repetitions On Static And Dynamic Strength, Sai Chaitanya Reddy Bogolu

LSU Master's Theses

The objective of this study was to investigate the effect of repetitions on static and dynamic strength. The study is divided into two parts, the first part investigated static and dynamic strength during one, three and six repetitions per minute, and the second part of the study analyzed dynamic strength data collected using the Multiaxial Multipurpose Isokinetic Dynamometer. The study comprised of dynamic strength test data at three speeds of one, five and ten inch per second. Five male subjects participated in the first part of the study, and the results were analyzed by plotting a time series to observe …

Evaluation Of The Effect Of Vehicle Performance On Consumer Satisfaction, Elizabeth A. Cudney

Doctoral Dissertations

"Value is the relationship of functionality or benefit to the cost of a product or service. Consumers appear to seek value, but not all consumers are alike in their needs and wants. Common characteristics that consumers desire in automobiles include a high level of value relative to the product's cost. Consumers measure vehicle performance in terms of twenty-three attributes such as roominess, ride, reliability, handling, brake pedal feel, visibility, interior noise, acceleration, etc. Problems arise when automakers try to translate these characteristics into vehicle performance specifications and capabilities.

Quality is an essential element for both the consumer and producer since …

Balancing Mixed-Model Assembly Line To Reduce Work Overload In A Multi-Level Production System, Pravin Y. Tambe

LSU Master's Theses

Generating the optimal production schedule for an assembly line, which will balance the workload at all the production stages, is a difficult task considering a variety of practical constraints. Varying customer demand is an important factor to be considered when designing an assembly line. In order to respond to varying customer demand, many companies are attempting to make their production system more flexible/agile or adaptable to change. Due to the volatile nature of market, companies cannot afford to manufacture same type of product for long period of time and neither can maintain high inventory level; to tackle this problem we …

Employee Commitment And Turnover: Literature And Data Analysis Of Correlations, Jean-Paul M. Arnaout, Gamze Karayaz, Andres Sousa-Poza

Engineering Management & Systems Engineering Faculty Publications

Due to the current turbulent environment, companies had to evolve form their traditional rigid structures to flexible and efficient ones, in order to better adapt to the continuous changes in the environment. New practices have emerged in the workplace, particularly the large layoffs of employees due to budget cuts, leading to an increase in the organizations' turnover. Thus, in today's world, a company is subject to high turnovers at any time of its life cycle; a suggested approach for reducing this turnover is through the improvement of organizational commitment. This paper addresses the following question: "Do all forms of employee …

Assimilating Non-Probabilistic Assessments Of The Estimation Of Uncertainty Bias In Expert Judgment Elicitation Using An Evidence Based Approach In High Consequence Conceptual Designs, Colin K. S. Barrows

Engineering Management & Systems Engineering Theses & Dissertations

One of the major challenges in conceptual designs of complex systems is the identification of uncertainty embedded in the information due to lack of historic data. This becomes of increased concern especially in high-risk industries. This document reports a developed methodology that allows for the cognitive bias, estimation of uncertainty, to be elucidated to improve the quality of elicited data. It consists of a comprehensive literature review that begins by defining a 'High Consequence Conceptual Engineering Environment' and identifies the high-risk industries in which these environments are found. It proceeds with a discussion that differentiates risk and uncertainty in decision-making …

A Dyadic Composition To Foster Virtual Team Effectiveness: An Experimental Study, Gamze Karayaz

Engineering Management & Systems Engineering Theses & Dissertations

The importance of effectiveness for virtual teamwork continues to gain momentum as technology and globalization of work accelerate. The implementation of virtual teams provides one approach to enhance competitiveness, overcoming the disadvantages of space and time differences through collaborative technologies. The influence of structure to virtual team performance has not been clearly established in the literature. The purpose of this research study was to investigate the effectiveness of a dyad structured approach for virtual teams using a quasi-experimental research design.

This research investigated four questions related to the influence of structure on virtual team effectiveness related to task performance, communication …

Imse Alumni Survey Of Abet Program Educational Objectives, Paul Savory

Department of Industrial and Management Systems Engineering: Faculty Publications

This report showcases the results of the Department of Industrial and Management System Engieering's survey of alumni regarding our updated ABET Program Educational Objectives. The Program Educational Objectives represent the expected characteristics of industrial engineering graduates within three to five years of receiving a Bachelor of Science degree in Industrial and Management Systems Engineering from the University of Nebraska-Lincoln. A total of 76 responses were received. The alumni survey responses indicate strong agreement and approval for the new Program Educational Objectives. The associated comments will be used by the IMSE faculty to future refine the course curriculum to ensure that …