Operations Research, Systems Engineering and Industrial Engineering Commons^™

"Making It Fresh - Your Choice For Performance", The Army's Hospital Foodservice Program, S. Spielmann, M. Worley, R. Harris

United States Army: Publications

To describe the Army’s new foodservice design and concept, “Making it Fresh—Your Choice for Performance” and its application for customer and patient feeding in a fixed medical treatment facility.

Moderate Zinc Restriction Affects Intestinal Health And Immune Function In Lipopolysaccharide-Challenged Mice, Daniel G. Peterson, Angus G. Scrimgeour, James P. Mcclung, Elizabeth A. Koutsos

United States Army: Publications

Zinc (Zn) is an essential nutrient that affects immune function, especially within the digestive system, although the underlying mechanisms are not well understood. This study examined the effects of short-term moderate Zn restriction on intestinal health and immune function in lipopolysaccharide (LPS)-challenged mice through plasma cytokine profiling and histological evaluation of intestinal tissue sections. Adult male mice were fed with a Zn-adequate (40 ppm) or a Zn-marginal (4 ppm) diet for 4 weeks, and then a bacterial challenge was simulated by intraperitoneal injection of LPS (10 μg/g body weight [BW]) or saline (control). BW was recorded weekly, and feed intake …

Why Divide By (N-1) For Sample Standard Deviation?, Paul Savory

Department of Industrial and Management Systems Engineering: Instructional Materials

In statistics, the sample standard deviation is a widely used measure of the variability or dispersion of a data set. The standard deviation of a data set is the square root of its variance. In calculating the sample standard deviation, the divisor is the number of samples in the data set minus one (n-1) rather than n. This often confuses students. This paper offers a quick overview of why the divisor is (n-1) for calculating the sample standard deviation.

Historical Perspective And Contribution Of Us Researchers Into The Field Of Self-Propagating High-Temperature Synthesis (Shs)/Combustion Synthesis (Cs): Personal Reflections, J. W. Mccauley, J. A. Puszynski

United States Army: Publications

In 1967, Merzhanov, Skhiro, and Borovinskaya published the first comprehensive paper describing self-sustaining character of reactions in a condensed phase, which could be utilized for synthesis of many ceramic and intermetallic materials [1]. In this paper, the authors demonstrated the principle of the so called “solid flame” using reactions between transition metals and boron, carbon or nitrogen. The world-wide combustion synthesis community considers this comprehensive paper and subsequent integrated experimental and theoretical research effort conducted in the former Soviet Union as the beginning of a new approach and method of synthesizing advanced high temperature materials. The main research was conducted …

Anaerobic Treatment Of Army Ammunition Production Wastewater Containing Perchlorate And Rdx, Emina Atikovic, Makram T. Suidan, Stephen W. Maloney

United States Army: Publications

Perchlorate is an oxidizer that has been routinely used in solid rocket motors by the Department of Defense and National Aeronautics and Space Administration. Royal Demolition Explosive (RDX) is a major component of military high explosives and is used in a wide variety of munitions. Perchlorate bearing wastewater typically results from production of solid rocket motors, while RDX is transferred to Army industrial wastewaters during load, assemble and pack operations for new munitions, and hot water or steam washout for disposal and deactivation of old munitions (commonly referred to as demilitarization, or simply demil).
Biological degradation in Anaerobic Fluidized Bed …

Differences In The Performance Of Knowledge Transfer Across Projects: A Study Of Gender And Role Of Key Project Stakeholders, Rafael E. Landaeta, Catherine Vergopia, Rey N. Diaz

Engineering Management & Systems Engineering Faculty Publications

This investigation contributes empirical results of differences identified in key project stakeholders with respect to their use of knowledge transferred across projects. Gender and role were the two individual characteristics investigated. Project managers and members of project teams were the key stakeholders analyzed. Data was collected from 71 closed projects using a survey composed of closed-ended questions. The data collected was cross tabulated and statistically analyzed using Friedman's test and Spearman's correlation. The results provide evidence of the association of the performance of knowledge transfer across projects with (a) the individual factors of gender and role of key project stakeholders …

Value Mapping Framework Involving Stakeholders For Supply Chain Improvement When Implementing Information Technology Projects, Karla Moore

Electronic Theses and Dissertations

Successful Supply Chain Management (SCM) depends on how well an organization performs internal and external communications with trading partners, executes the logistics component, and understands/monitors related costs of conducting its business. The use of information technology (IT) is considered a prerequisite for the effective control of today's complex supply chains. Increased communication technology has redefined how businesses work together, raised customer expectations, and placed new demands on supply chain performance. IT components with proven and rapid return-on-investment are favored to support critical supply chain processes such as leaner manufacturing processes, consumer-driven supply chains, and customer responsiveness. The use of IT …

Improving Business Performance Through The Integration Of Human Factors Engineering Into Organizations Using A Systems Engineeri, Monica Philippart

Electronic Theses and Dissertations

Most organizations today understand the valuable contribution employees as people (rather than simply bodies) provide to their overall performance. Although efforts are made to make the most of the human in organizations, there is still much room for improvement. Focus in the reduction of employee injuries such as cumulative trauma disorders rose in the 80 s. Attempts at increasing performance by addressing employee satisfaction through various methods have also been ongoing for several years now. Knowledge Management is one of the most recent attempts at controlling and making the best use of employees knowledge. All of these efforts and more …

Unmanned Aerial Vehicle Routing With Limited Risk, Siriwat Visoldilokpun

Industrial, Manufacturing, and Systems Engineering Dissertations - Archive

Due to safety and uninhabitable surrounding environments, long range Unmanned Aerial Vehicles (UAVs) have become an increasingly popular option in both scientific and military applications. With troubling oil prices, a logistic planner requires an efficient method to identify an optimal routing solution. The solution should not only optimize the bottom line objective but must also control variations in an operation.We study the UAV routing problem with limited risk (URPR) in which the considered risk is a fuel burn variance caused by wind variation. The URPR determines the optimal route that minimizes total expected fuel burn to visit all assigned targets …

A Hybrid System Dynamics-Discrete Event Simulationapproach To Simulating The Manufacturing Enterprise, Magdy Helal

Electronic Theses and Dissertations

With the advances in the information and computing technologies, the ways the manufacturing enterprise systems are being managed are changing. More integration and adoption of the system perspective push further towards a more flattened enterprise. This, in addition to the varying levels of aggregation and details and the presence of the continuous and discrete types of behavior, created serious challenges for the use of the existing simulation tools for simulating the modern manufacturing enterprise system. The commonly used discrete event simulation (DES) techniques face difficulties in modeling such integrated systems due to increased model complexity, the lack of data at …

Project Review Maturity And Project Performance: An Empirical Case Study, Catherine Vergopia

Electronic Theses and Dissertations

Many organizations use project management maturity models to improve their project performance. These systematic and sequential frameworks are designed to help organizations quantify their project management maturity and improve their project management processes. However, these models rarely put enough emphasis on project reviews as tools to improve project performance, because, too often, project reviews are considered as non-productive administrative processes. The lack of emphasis on project reviews in project management maturity models is also illustrated by the limited amount of research published on the relationship between project reviews and project performance. Based on the concept of project management maturity models, …

Dmarc: A Framework For The Integration Of Dmaic And Dmadv, Abhishek Vootukuru

Electronic Theses and Dissertations

The Lean Six Sigma methodology is being applied extensively to tackle many quality related issues in many processes of today s industries. Various companies have benefited greatly from the adoption of Six Sigma and Lean engineering concepts since their introduction, and continue to do so. The DMAIC method that is traditionally adopted in the implementation of the Lean Six Sigma methodology has proven to yield cost saving results in most cases. Yet, industries have found that just improvement of existent process and products to reduce defects, does not quench the customer s growing thirst for greater quality. In order to …

Data Mining-Driven Approahces For Process Monitoring And Diagnosis, Thuntee Sukchotrat

Industrial, Manufacturing, and Systems Engineering Dissertations - Archive

The objective of this dissertation is to develop a new set of efficient process monitoring and diagnostic tools through their integration with data mining algorithms. Statistical process control (SPC) is one of the most widely used techniques for quality control. Although traditional SPC tools are effective in simple manufacturing processes that generate a small volume of independent data, these tools falter when confronted by the large streams of complex and correlated data found in modern manufacturing systems. As the limitations of SPC methodology become increasingly obvious in the face of ever more complex manufacturing processes, data mining, because of its …

Functional Data Analysis For Environmental And Biomedical Problems, Chivalai Temiyasathit

Industrial, Manufacturing, and Systems Engineering Dissertations - Archive

Vast amounts of data are being generated due to the development of sensing technology. Among those, one of the common types of data usually found in various discipline is the functional data. Because the functional data are generally collected in a wide area of interest over a relatively long period, such analyses should take into account both temporal and spatial characteristics. Furthermore, combinations of observations from multiple locations, each with a large number of serially correlated values, lead to a situation that poses a great challenge to analytical and computational capabilities. In contrast, data obtained from medical and biomedical researches …

How Do You Interpret A Confidence Interval?, Paul Savory

Department of Industrial and Management Systems Engineering: Instructional Materials

A confidence interval (CI) is an interval estimate of a population parameter. Instead of estimating the parameter by a single value, a point estimate, an interval likely to cover the parameter is developed. Many student incorrectly interpret the meaning of a confidence interval. This paper offers a quick overview of how to correctly interpret a confidence interval.

Evaluating The Performance Of Animal Shelters: An Application Of Data Envelopment Analysis, Brandy Heyde

Electronic Theses and Dissertations

The focus of this thesis is the application of data envelopment analysis to understand and evaluate the performance of diverse animal welfare organizations across the United States. The results include identification of the most efficient animal welfare organizations, at least among those that post statistics on their operations, and a discussion of various partnerships that may improve the performance of the more inefficient organizations. The Humane Society of the United States estimates that there are 4000 - 6000 independently-run animal shelters across the United States, with an estimated 6-8 million companion animals entering them each year. Unfortunately, more than half …

Defining Risk Assessment Confidence Levels For Use In Project Management Communications, Gary Johnson

Electronic Theses and Dissertations

A review of the literature regarding risk management and effective risk communications identified that very few researchers have addressed risk assessment confidence levels when using risk scoring methods. The focus of this research is to develop a definition of risk assessment confidence levels for use in internal project management communications and to evaluate its usefulness. This research defines risk assessment confidence level as "The degree of certainty that the likelihood or consequence score (assigned by the risk assessor) reflects reality." A specific level of confidence is defined based on the types of analyses that were conducted to determine the risk …

Application Of Artificial Neural Networks And Colored Petri Nets On Earthquake Resilient Water Distribution Systems, Nandini Kavanal Balakrishnan

Masters Theses

"Water distribution systems are important lifelines and a critical and complex infrastructure of a country. The performance of this system during unexpected rare events is important as it is one of the lifelines that people directly depend on and other factors indirectly impact the economy of a nation. In this thesis a couple of methods that can be used to predict damage and simulate the restoration process of a water distribution system are presented. Contributing to the effort of applying computational tools to infrastructure systems, Artificial Neural Network (ANN) is used to predict the rate of damage in the pipe …

Applying Six Sigma Methodology To The Admissions Process In Higher Education, Alok Verma

Engineering Technology Faculty Publications

Time and quality are two important metrics for improving a company's production and profit performance. Six Sigma is one of the most powerful continuous improvement tools that have been used to improve the quality of products and business processes. Six Sigma methodology provides the techniques and tools to improve the capability and reduce the number of defects in any process. It was originally developed by Motorola to systematically improve processes by eliminating defects. Although, originally developed for manufacturing processes, the tool has been effectively applied to improve business processes also. Evaluation of applications for admission in higher education is often …

Measuring Agility Of Organizations - A Comprehensive Agility Measurement Tool (Camt), Ameya S. Erande, Alok K. Verma

Engineering Technology Faculty Publications

Since "Agility" is ability to respond to unpredictable changes with quick response and profitability, it is not industry specific. This "not industry specific" nature of agility makes it hard to assess and measure it on a fixed scale. Measurement of agility of an enterprise has been a major topic of research since inception of agility in 1991. Though some methods have been developed to measure agility, they mainly remain tied to manufacturing industry. As agility is present in all the industries, comprehensive tool to measure it is a necessity in order to determine responsiveness of an enterprise to external turbulences. …

The Influence Of Acidity On Microbial Fuel Cells Containing Shewanella Oneidensis, Justin C. Biffinger, Jeremy Pietron, Orianna Bretschger, Lloyd J. Nadeau, Glenn R. Johnson, Cynthia C. Williams, Kenneth H. Nealson, Bradley R. Ringeisen

United States Navy: Publications

Microbial fuel cells (MFCs) traditionally operate at pH values between 6 and 8. However, the effect of pH on the growth and electron transfer abilities of Shewanella oneidensis MR-1 (wild-type) and DSP10 (spontaneous mutant), bacteria commonly used in MFCs, to electrodes has not been examined. Miniature MFCs using bare graphite felt electrodes and nanoporous polycarbonate membranes with MR-1 or DSP10 cultures generated >8W/m³ and ∼400μA between pH 6–7. The DSP10 strain significantly outperformed MR-1 at neutral pH but underperformed at pH 5. Higher concentrations of DSP10 were sustained at pH 7 relative to that of MR-1, whereas at pH …

The Army Dietetic Mentorship Program: Making The Most Out Of Mentoring, M.A. Worley, M.B. Salgueiro, D.R. Hernandez, C.J. Buck

United States Army: Publications

To describe the Army’s Dietetic Mentorship Program and its effect on personnel and professional development of recent internship graduates.

A Systematic Approach To Project Portfolio Selection For Economic Development In Municipalities: A Case Study In Vienna, Missouri, Amanda Danielle Alpaugh

Masters Theses

"Economic development is essential for the survival of all municipalities in the United States. Economic growth, created through project implementation, brings new capital into municipalities by increasing the tax base. Smaller municipalities often struggle to implement projects that promote economic growth. These municipalities run into problems because they lack resources to hire an economic consultant and capabilities to independently complete the strategic planning process. This thesis describes an easy-to-use and easy-to-implement systematic ten-step approach to project portfolio selection for economic growth within smaller municipalities...The ten-step approach was employed in a case study performed in Vienna, Missouri. The case study involved …

Development Of Integrated Process Simulation System Model For Spent Fuel Treatment Facility Design, Yitung Chen, Sean Hsieh

Separations Campaign (TRP)

The major objectives will lead to the creation of a framework that combines all the strengths of AMUSE’s complicated calculations, well-established commercial system process package, and ISOPro’s flexible parameter optimization modules. Development of the process simulation code can be done using the solvent extraction process at Argonne National Laboratory in collaboration with the research team from the Mechanical Engineering Department at UNLV.

Research accomplishments:

• Completed final version of the ISOPro User Manual associated with summarized ISOPro source codes.

• Redesigned and completed use case and design class diagrams (DCD) of the ISOPro package using ArgoUML.

• Improved ISOPro system …

Improving Airline Schedule Reliability Using A Strategic Multi-Objective Runway Slot Assignment Search Heuristic, Florian Hafner

Electronic Theses and Dissertations

Improving the predictability of airline schedules in the National Airspace System (NAS) has been a constant endeavor, particularly as system delays grow with ever-increasing demand. Airline schedules need to be resistant to perturbations in the system including Ground Delay Programs (GDPs) and inclement weather. The strategic search heuristic proposed in this dissertation significantly improves airline schedule reliability by assigning airport departure and arrival slots to each flight in the schedule across a network of airports. This is performed using a multi-objective optimization approach that is primarily based on historical flight and taxi times but also includes certain airline, airport, and …

Optimizing The Level Of Customization For Products In Mass Customization Systems, Sami Spahi

Electronic Theses and Dissertations

Mass customization (MC) was developed to capitalize on the combined benefits of economies of scale and economies of scope. Balancing the tradeoffs involved in an MC system warrants the determination of the degree or the extent of customization. Most of the literature views the degree of customization as how early or how far the customer is integrated in the production cycle, which is defined as the order decoupling point. In this study we are addressing the degree of customization from a product structural perspective. There are two objectives in this research. The first is to develop a unit of measurement …

A Framework To Align Strategy, Improvement Performance, And Customer Satisfaction Using An Integration Of Six Sigma And Balanced, Adriana Rodriguez

Electronic Theses and Dissertations

This dissertation investigated the development, implementation, and evaluation of a management methodology founded on the alignment among the strategy, performance, and customer to bring value to any organization. A case study/action research in a service organization, called Institution "Z," provided the opportunity to assess the effects of the proposed Six Sigma Scorecard (SSS) methodology in the productivity indicators (measured by cycle time, line capacity, and number of errors). The Case study/action research was conducted in three phases: Model and Concepts Design, Data Collection, and Findings. During the research, validity was pursued by using triangulation and theory to help maintain the …

Information Retrieval Performance Enhancement Using The Average Standard Estimator And The Multi-Criteria Decision Weighted Set, Tareq Ahram

Electronic Theses and Dissertations

Information retrieval is much more challenging than traditional small document collection retrieval. The main difference is the importance of correlations between related concepts in complex data structures. These structures have been studied by several information retrieval systems. This research began by performing a comprehensive review and comparison of several techniques of matrix dimensionality estimation and their respective effects on enhancing retrieval performance using singular value decomposition and latent semantic analysis. Two novel techniques have been introduced in this research to enhance intrinsic dimensionality estimation, the Multi-criteria Decision Weighted model to estimate matrix intrinsic dimensionality for large document collections and the …

Stochastic Resource Constrained Project Scheduling With Stochastic Task Insertion Problems, Sandra Archer

Electronic Theses and Dissertations

The area of focus for this research is the Stochastic Resource Constrained Project Scheduling Problem (SRCPSP) with Stochastic Task Insertion (STI). The STI problem is a specific form of the SRCPSP, which may be considered to be a cross between two types of problems in the general form: the Stochastic Project Scheduling Problem, and the Resource Constrained Project Scheduling Problem. The stochastic nature of this problem is in the occurrence/non-occurrence of tasks with deterministic duration. Researchers Selim (2002) and Grey (2007) laid the groundwork for the research on this problem. Selim (2002) developed a set of robustness metrics and used …

Modeling Lane-Based Traffic Flow In Emergency Situations In The Presence Of Multiple Heterogeneous Flows, Amani Saleh

Electronic Theses and Dissertations

In recent years, natural, man-made and technological disasters have been increasing in magnitude and frequency of occurrence. Terrorist attacks have increased after the September 11, 2001. Some authorities suggest that global warming is partly the blame for the increase in frequency of natural disasters, such as the series of hurricanes in the early-2000's. Furthermore, there has been noticeable growth in population within many metropolitan areas not only in the US but also worldwide. These and other facts motivate the need for better emergency evacuation route planning (EERP) approaches in order to minimize the loss of human lives and property. This …