Operations Research, Systems Engineering and Industrial Engineering Commons^™

Implementing A Functional Iso 9001 Quality Management System In Small And Medium-Sized Enterprises, Andres Sousa-Poza, Mert Altinkilinc, Cory Searcy

Engineering Management & Systems Engineering Faculty Publications

This conceptual paper provides guidance for the implementation of a functional ISO 9001 quality management system (QMS) in small and medium-sized enterprises (SMEs). To help a SME understand its starting point, four initial states for QMS implementation are defined. Five paths for moving the QMS from the initial state to the desired state are described. To support the transition from the initial to the desired state, some key considerations in implementing a QMS in SMEs are discussed. The paper is based on site visits and implementation assistance the authors have provided to several SMEs. It is anticipated the paper will …

Rubric For Project Self-Evaluation, Paul Savory

Department of Industrial and Management Systems Engineering: Instructional Materials

I have developed this rubric to allow each member of a project team to offer a self-assessment of their own performance on the projects. It is my attempt to develop a standardized evaluation linked to specified criteria, making the grading process simpler and more transparent.

Ruberic For Project Team Member Evaluation, Paul Savory

Department of Industrial and Management Systems Engineering: Instructional Materials

I have developed this rubric to allow team members for course projects to offer an evaluation or assessment of the fellow members of their team. It is my attempt to develop a standardized evaluation linked to specified criteria, making the grading process simpler and more transparent.

Determining The Effect Of Speaker's Gender And Speech Synthesis On Callsign Acquisition Test (Cat) Results, Jasminkumar B. Soni

Browse all Theses and Dissertations

Effective and efficient speech communication is one of the leading factors for success of battlefield operation. With the increases in the levels of gender diversity in military services, it is important to assess the effectiveness of voice for both genders in communication systems. The purpose of this research study was to determine the effect of the speaker's voice (male and female) on the speech intelligibility (SI) performance of the Callsign Acquisition Test (CAT). In addition, the effects of synthesized speech were evaluated. The CAT test is a new SI test that has been developed for military use. A group of …

Presence-Dependent Performance Differences Between Virtual Simulations And Miniature Worlds, Andre Huthmann

Electronic Theses and Dissertations

The purpose of simulation is to avoid reality-based constraints by the implemen-tation of a synthetic model. Based on this advantage, interactive simulations have conquered all areas of applications from acquisition, and training, to research. Simulation results are transferred in many ways into reality and conclusions are drawn from the simulation to the application. Many anecdotal observations on human-in-the-loop simulations have shown a significant difference in actor behavior between simulations and reality-based applications. It seems that the factors that makes simulation so attractive, namely the absence of constraints and especially of imminent danger for persons and equipment, influence the behavior and …

Sensitivity Analysis Framework For Large And Complex Simulation Models, Ghaith Rabadi, Shannon Bowling, Charles Keating, Resit Unal

Engineering Management & Systems Engineering Faculty Publications

In this paper, a framework for conducting Sensitivity Analysis (SA) on large and complex simulation models is introduced. The framework consists of components that are designed to make the SA a systematic process that is easy to manage and follow by simulation analysts and practitioners. Unlike local SA (one-variable-at-a-time SA), the method presented here is variance-based and it is rooted in the field of Design of Experiments (DoE) where Input Variables are varied and Output Variables are measured. Based on the DoE results, a risk scoring system is developed to identify the sensitivity of the Input Variables, and as a …

Abatteuses Forestières : Dispositif Et Circuits De Commande Relatifs À La Sécurité, Laurent Giraud, Yuvin Chinniah, Damien Burlet-Vienney, Joseph-Jean Paques, Marina Koutchouk, Renaud Daigle

Rapports de recherche scientifique

Les abatteuses forestières sont des engins tout-terrains conçus pour évoluer en forêt, qui servent de véhicule moteur pour déplacer une tête d’abattage.

L’utilisation d’abatteuses avec une tête d’abattage multifonctionnelle s’est largement répandue au Québec ces dernières années pour deux raisons :

• Cette méthode d’abattage réduit la machinerie car une seule machine tronçonne et façonne les arbres en billots, là où il en fallait plusieurs avec les anciennes méthodes;
• La méthode d’abattage abîme moins le sol de la forêt car le façonnage des arbres se fait sur place et crée ainsi un tapis végétal.

L’IRSST a lancé une série d’études sur …

Qualitative Mapping For Understanding The Collective Judgment Building Process : A Study Of The Federal Open Market Committee, Hyunjung Kim

Legacy Theses & Dissertations (2009 - 2024)

This study develops a mapping method for studying a collective judgment building process in a decision-making group. Environmental uncertainties and a lack of information require a decision maker to make judgments about various issues relevant to the decision task. In a group setting, the members together weave their structural model of the system with available information to build a collective judgment for the decision task.

Characterization Of Electrochemically Active Bacteria Utilizing A High-Throughput Voltage-Based Screening Assay, Justin C. Biffinger, Meghann Ribbens, Bradley Ringeisen, Jeremy Pietron, Steven Finkel, Kenneth Nealson

United States Navy: Publications

Metal reduction assays are traditionally used to select and characterize electrochemically active bacteria (EAB) for use in microbial fuel cells (MFCs). However, correlating the ability of a microbe to generate current from an MFC to the reduction of metal oxides has not been definitively established in the literature. As these metal reduction assays may not be generally reliable, here we describe a four- to nine-well prototype high throughput voltage-based screening assay (VBSA) designed using MFC engineering principles and a universal cathode. Bacterial growth curves for Shewanella oneidensis strains DSP10 and MR-1 were generated directly from changes in open circuit voltage …

Simultaneous Analysis Of Physiological And Electrical Output Changes In An Operating Microbial Fuel Cell With Shewanella Oneidensis, Justin C. Biffinger, Ricky Ray, Brenda J. Little, Lisa A. Fitzgerald, Meghann Ribbens, Steven E. Finkel, Bradley R. Ringeisen

United States Navy: Publications

Changes in metabolism and cellular physiology of facultative anaerobes during oxygen exposure can be substantial, but little is known about how these changes connect with electrical current output from an operating microbial fuel cell (MFC). A high-throughput voltage based screening assay (VBSA) was used to correlate current output from a MFC containing Shewanella oneidensis MR-1 to carbon source (glucose or lactate) utilization, culture conditions, and biofilm coverage over 250 h. Lactate induced an immediate current response from S. oneidensis MR-1, with both air-exposed and anaerobic anodes throughout the duration of the experiments. Glucose was initially utilized for current output by …

Photophysical Properties Of C60 Colloids Suspended In Water With Triton X-100 Surfactant: Excited-State Properties With Femtosecond Resolution, Andrew F. Clements, Joy E. Haley, Augustine M. Urbas, Alan Kost, R. David Rauh, Jane F. Bertone, Fei Wang, Brian M. Wiers, De Gao, Todd S. Stefanik, Andrew G. Mott, David M. Mackie

United States Army: Publications

We examine the photophysics of a colloidal suspension of C₆₀ particles in a micellar solution of Triton X-100 and water, prepared via a new synthesis which allows high-concentration suspensions. The particle sizes are characterized by transmission electron microscopy and dynamic light scattering and found to be somewhat polydisperse in the range of 10-100 nm. The suspension is characterized optically by UV-vis spectroscopy, femtosecond transient absorption spectroscopy, laser flash photolysis, and z-scan. The ground-state absorbance spectrum shows a broad absorbance feature centered near 450 nm which is indicative of colloidal C₆₀. The transient absorption dynamics, presented for the …

Retrieval Of Subpixel Snow Covered Area, Grain Size, And Albedo From Modis, Thomas H. Painter, Karl Rittger, Ceretha Mckenzie, Peter Slaughter, Robert E. Davis, Jeff Dozier

United States Army: Publications

We describe and validate a model that retrieves fractional snow-covered area and the grain size and albedo of that snow from surface reflectance data (product MOD09GA) acquired by NASA's Moderate Resolution Imaging Spectroradiometer (MODIS). The model analyzes the MODIS visible, near infrared, and shortwave infrared bands with multiple endmember spectral mixtures from a library of snow, vegetation, rock, and soil. We derive snow spectral endmembers of varying grain size from a radiative transfer model specific to a scene's illumination geometry; spectra for vegetation, rock, and soil were collected in the field and laboratory. We validate the model with fractional snow …

Hydrogen Infrastructure: Resource Evaluation And Capacity Modeling, Kevin B. Martin

Doctoral Dissertations

"A hydrogen economy could offer energy stability, economical, and environmental benefits. Several issues are involved in the design and implementation of a hydrogen economy such as the selection of feedstocks, generation and storage technologies, transportation methods, appropriate equipment capacity, codes/standards and public awareness. The design of a hydrogen infrastructure may seem insurmountable; however, as the system is deconstructed a proper design can be achieved. In order to better understand how a hydrogen system for light duty vehicles might operate, both hydrogen resource and capacity analysis and modeling is conducted. Specifically, an evaluation of leading near term production and distribution technologies …

Enhancing Systems Integration By Incorporating Business Continuity Drivers, Bajgoric Nijaz, Young Moon

Mechanical and Aerospace Engineering - All Scholarship

Purpose – The purpose of this paper is to present a framework for developing an integrated operating environment (IOE) within an enterprise information system by incorporating business continuity drivers. These drivers enable a business to continue with its operations even if some sort of failure or disaster occurs.

Design/methodology/approach – Development and implementation of the framework are based on holistic and top-down approach. An IOE on server’s side of contemporary business computing is investigated in depth.

Findings – Key disconnection points are identified, where systems integration technologies can be used to integrate platforms, protocols, data and application formats, etc. Downtime …

A Framework For Managing Engineering Change Propagation, Krishna Reddi, Young Moon

Mechanical and Aerospace Engineering - All Scholarship

Engineering Changes (ECs) are facts of life for any company developing and introducing new products, despite a commonly held notion that they are distractions from normal operation. Companies can become more innovative by utilising ideas from the ECs or by learning how to handle the ECs. This paper presents a framework to manage the ECs effectively, particularly the issue of EC propagation. An EC seldom confines itself to a single change, but triggers other changes in different components. The framework is designed to identify the affected components automatically, capture the required knowledge during the design phase of the product life …

Rapid Sensor Technology: A Risk And System Complexity Analyses Of Early Detection Of Influenza-Like-Illnesses, Cesar Ariel Pinto, Ipek Bozkurt

Engineering Management & Systems Engineering Faculty Publications

The development of effective and reliable methods to defend the nation against biological terrorism remains an urgent challenge to researchers in the areas of risk, bio-defense, public health, and emergency medicine. The emerging threat of the avian flu pandemic also highlights the unpreparedness of our nation's health care system to meet a highly contagious and infectious disease outbreak. The implementation of a rapid sensor technology for early detection of influenza-like-illness provides possible opportunities, as well as problems. Bounding and defining such a complex problem is one of the first challenges this research addresses. Approaching this problem from various perspectives such …

Embedding Simulation Education Into The Engineering Management Body Of Knowledge, Andreas Tolk, Ghaith Rabadi, Donald N. Merino

Computational Modeling & Simulation Engineering Faculty Publications

The American Society for Engineering Management (ASEM) established a Body of Knowledge (BoK). As simulation is of growing interest to engineers in general and to engineering managers in particular, simulation is part of this documentation of domains of interest that characterise the profession. The basis for the Body of Knowledge comprises of established and accredited curricula and additional input from practitioners of the field. As it is essential to cover the basic topics and core competences as well as application specific domain knowledge, the simulation education for engineers is categorised into topics on simulation theory and simulation application.

Contributions By Individual And Group Strategies For Organizational Learning In Architectural, Engineering, And Construction Firms, Robert Beaver

Electronic Theses and Dissertations

Organizations with multiple operating requirements require support functions to assist in execution of strategic goals. This effort, in turn, requires management of engineering activities in control of projects and in sustaining facilities. High level strategies include employing engineering support that consists of a project management function encompassing technical and managerial disciplines. The architecture/engineering, and construction office (AEC) is the subject of this research. Engineering and construction oriented organizations have experienced challenges to their abilities to learn and grow. This has potential detrimental implications for these organizations if support functions cannot keep pace with changing objectives and strategy. The competitive nature …

A Systematic Analysis To Identify, Mitigate, Quantify, And Measure Risk Factors Contributing To Falls In Nasa Ground Support Ope, Joylene Ware

Electronic Theses and Dissertations

The objective of the research was to develop and validate a multifaceted model such as a fuzzy Analytical Hierarchy Process (AHP) model that considers both qualitative and quantitative elements with relative significance in assessing the likelihood of falls and aid in the design of NASA Ground Support Operations in aerospace environments. The model represented linguistic variables that quantified significant risk factor levels. Multiple risk factors that contribute to falls in NASA Ground Support Operations are task related, human/personal, environmental, and organizational. Six subject matter experts were asked to participate in a voting system involving a survey where they judge risk …

The Design And Development Of An Additive Fabrication Process And Material Selection Tool, Andrew Palmer

Electronic Theses and Dissertations

In the Manufacturing Industry there is a subset of technologies referred to as Rapid Technologies which are those technologies that create the ability to compress the time to market for new products under development . Of this subset, Additive Fabrication (AF), or more commonly known as Rapid Prototyping (RP), acquires much attention due to its unique and futuristic approach to the production of physical parts directly from 3D CAD data, CT or MRI scans, or data from laser scanning systems by utilizing various techniques to consecutively generate cross-sectional layers of a given thickness upon the previous layer to form 3D …

Data Entry Error In Mobile Keyboard Device Usage Subject To Cognitive, Environmental, And Communication Workload Stressors Present In Fully Activated Emergency Operations Centers, Samiullah Durrani

Electronic Theses and Dissertations

The diversity and dynamic nature of disaster management environments necessitate the use of convenient, yet reliable, tools for technology. While there have been many improvements in mitigating the effects of disasters, it is clearly evident by recent events, such as Hurricane Katrina that issues related to emergency response and management require considerable research and improvement to effectively respond to these situations. One of the links in a disaster management chain is the Emergency Operations Center (EOC). The EOC is a physical command center responsible for the overall strategic control of the disaster response and functions as an information and communication …

Dod Acquisition Workforce Education: An Sba Education Case Study, Richard Davenport

Electronic Theses and Dissertations

A Department of Defense (DoD) M&S education task force is in the process of studying the Modeling and Simulation (M&S) education of the acquisition workforce. Historically, DoD acquisition workforce education is not referred to as education, but rather what the Defense Acquisition University (DAU) refers to as "practitioner training, career management, and services." The DAU is the organization primarily responsible for training the DoD acquisition corps in conjunction with service schools and strategic partners in the civilian sector. DAU programs primarily focus on program management, contracting, and management of logistics across the system life cycle. Further, the examples and cases …

Occupational Lower Extremity Risk Assessment Modeling, Christopher Reid

Electronic Theses and Dissertations

Introduction: Lower extremity (LE) work-related musculoskeletal disorders (WMSDs) are known to occur with cumulative exposure to occupational and personal risks. The objective of this dissertation study was to find if creating a quantifiable risk detection model for the LE was feasible. The primary product of the literature review conducted for this study resulted in focusing the attention of the model development process onto creating the initial model of the LE for assessing knee disorder risk factors. Literature Review: LE occupational disorders affect numerous industries and thousands of people each year by affecting any one of the musculoskeletal systems deemed susceptible …

On The Effects Of Small-Scale Fading And Mobility In Mobile Wireless Communication Network, Bandana Paudel

Masters Theses

"In this study, a comprehensive analysis of the impact of mobility on end-to-end performance measures of Mobile Ad Hoc Network is performed by using small-scale fading models. Network simulation is performed in order to study a wide range of phenomena occurring during MANET communication. The effectiveness of three reactive routing protocols against different level of mobility is observed under varying network parameter like the network size, number of nodes and network connectivity. The study reveals that the network sparseness or density favors one or the other routing mechanism under varying mobility. Outcome of the simulation also provides a great deal …

Preventing Chemical Product Failure, Kenneth Ombete

Masters Theses

"The purpose of this thesis is to demonstrate a research methodology to prevent chemical product failures. This methodology extends the risk in early design (RED) method for prevention of failure in electromechanical products to include products with chemical subsystems. Inclusion of this domain is demanded by the ever-growing semiconductor and energy industries. The RED method was extended by first identifying principal chemical failure modes and adding them to the failure mode taxonomy. The RED database was then augmented with historical failures of products that included chemical subsystems. Finally, the extension was validated with a case study of a fuel cell"--Abstract, …

Project Collaboration In A Distributed Environment, Shriroopa Prabhakar Deshpande

Masters Theses

"This thesis investigates methods of managing projects in an environment where project team members are in different locations. Today, large scale projects undertaken by firms that have a global presence are successfully developed across time, distance, and geographic boundaries. In order to survive in this environment, firms face many project challenges, including diverse employees, various work practices, and communication issues. Many communication issues can be minimized by the proper use of collaborative tools as well as by sharing expertise, coordinating activities, and managing relationships. Web-enabled project management tools have enhanced efforts to increase the quality, competitiveness, and profitability of these …

Adapting Management Strategies To Enter New Global Markets, Karuna Vineetha Vemulapalli

Masters Theses

"With globalization spreading its roots into every country, people from various countries are working together, and will be trying to understand the cultural differences between the organizations in different nations. Effective management of the cultural differences will be an important and competitive advantage. Keeping in mind the different perceptions of the term “Management” by varying cultures, namely United States and India, this research will be focused on understanding and managing these differences.

The proposed research will deal with concepts of cultural diversity, economic differences, intercultural and organizational differences between the two countries. Understanding why some factors like motivation, responsibility, and …

Using Extensible Modeling In Systems Engineering And Architectural Search, Jason Paul Dauby, Cihan H. Dagli

Engineering Management and Systems Engineering Faculty Research & Creative Works

The system architecting process is the hierarchical reduction of ambiguity associated with user needs and system design. Design allocation, and subsequent integration, implicitly requires a mechanism by which levels of detail can be added and removed from a decision scenario. This paper addresses the idea of engineering model sharing through the concept of vertical and horizontal extensibility as one mechanism by which hierarchical reduction in ambiguity can be facilitated. Extensible modeling introduces a systems architecting approach to the modeling community by identifying model interfaces and carefully decomposing the model domain. While the actual system hardware is not known at the …

Design Complexity And Its Relationship With Sn Ratio - Larger-The-Better Characteristics With Finite Target, Naresh K. Sharma, Elizabeth A. Cudney, Sonali Sharma

Engineering Management and Systems Engineering Faculty Research & Creative Works

The concept of complexity is an essential constituent of axiomatic design and axiomatic quality. a reciprocal transformation is used to compute quality loss for larger-the-better performance characteristics in Taguchi's methodology. El-Haik's work on connecting robust design and axiomatic design with the help of mathematical relationships also considers the reciprocal methodology for larger-the-better functional requirements. Because of reciprocal transformation axiomatic complexity formulation for larger-the-better performance characteristics is different from that for smaller-the-better and nominal-the-best characteristics. Second, the signal-to-noise ratio based on complexity is also different for the same reason. This paper shows that a simple linear transformation in which a finite …

Using Two Channel Communication To Study Selective Auditory Attention Using Air And Bone Conducted Interfaces, Kutbi Nuruddin Kaliyakuwawala

Browse all Theses and Dissertations

The purpose of this study was to evaluate the human capability to use selective auditory attention across the two different hearing pathways, air conduction and bone conduction. Four two channel communication systems were used as a basis for comparison: (1) both channels presented via headphones (left ear and right ear each represent a different channel), (2) two channels presented via loudspeakers placed at 135° and 225°, (3) one channel presented via headphones (both ears) and one channel to bone vibrator (placed at the condoyle), and (4) one channel presented via bone vibrator and one channel via loud speakers (placed at …