Manufacturing Commons^™

Materials-Processing Relationships For Metal Fused Filament Fabrication Of Ti-6al-4v Alloy., Paramjot Singh

Electronic Theses and Dissertations

Additive manufacturing (AM) is at the mainstream to cater the needs for rapid tooling and small-scale part production. The metal AM of complex geometries is widely accepted and promoted in the industry. While several metal AM technologies exist and are matured to a level where expectation in terms of design and properties are possible to realize. But the metal AM suffers from the heavy expense to acquire equipment, isotropic property challenges, and potential hazards to work with loose reactive metal powder. With this motivation, the dissertation aims to develop the fundamental aspects to print metal parts with bound Ti-6Al-4V powder …

Selective Laser Melting 17-4 Ph Stainless Steel And The Effect Of Varied Thermal Treatments On Fatigue Behavior., Sean Daniel Dobson

Electronic Theses and Dissertations

Fatigue failure is the leading source of loss in industry. In order for new means of manufacturing to move towards mainstream use a complete understanding of material and mechanical behavior must be gained. This endeavor seeks to aide in that task by observing the fatigue behavior of selective laser melting (SLM) additive manufacturing (AM) specimens and the effect of differing thermal treatment conditions for an optimized AM process. Stainless steel 17-4 PH specimens were fabricated using SLM AM and thermally treated to three conditions: as-built, solutionized and hardened, and direct hardened. These specimens were characterized for material (powder quality, density, …

Experimental And Numerical Study Of Process Parameters Effects Towards Part Quality And Porosity During Powder Bed Additive Manufacturing Processes., Subin Shrestha

Electronic Theses and Dissertations

Powder bed additive manufacturing (PB-AM) process utilizes an electron beam or a laser as a heat source to melt the metallic powder particles. These processes have the capability of freeform fabrication, however certain defects such as porosity, high surface roughness, etc. would hinder its application. It is important to understand the effect of the process parameters and the underlying physical phenomena, which lead to the formation of such defects. In this regard, a three-dimensional (3D) thermo-fluid model is developed to study the effect of beam speed on the surface morphology during powder bed electron beam additive fabrication (PB-EBAF). Besides, the …

Design And Demonstration Of Automated Technologies For The Fabrication And Testing Of Pem Fuel Cell Systems, Vladimir Gurau, Daniel Cox, Devin C. Fowler, Matthew Carter, Adedayo Ogunleke

Manufacturing Engineering: Faculty Publications (2015-2023)

This paper describes the research efforts at Georgia Southern University to develop robotic technologies for the fabrication of fuel cell components and stacks, as well as the design and fabrication of a High Temperature Proton Exchange Membrane Fuel Cell (HT-PEMFC) power system to be used as motive power and auxiliary power unit (APU) for a long range, unmanned, fully autonomous forest rover. The paper describes a manufacturing workcell consisting of a Yaskawa Motoman SDA5F dual arm robot with machine vision used for sorting, reorientation and stacking fuel cell components in presenters in preparation for their subsequent robotic assembly in fuel …

Spherical Cavity Expansion Approach For The Study Of Rigid-Penetrator’S Impact Problems, Mario Buchely, Alejandro Marañon

Materials Science and Engineering Faculty Research & Creative Works

In recent years, Spherical Cavity Expansion (SCE) theory has been extensively utilized to model dynamic deformation processes related to indentation and penetration problems in many fields. In this review, the SCE theory is introduced by explaining the different mathematical features of this theory, its solution, and a potential application to model the penetration of a rigid penetrator into a deformable target. First, a chronologically literature review of the most common models used to study this kind of penetration problems is introduced, focusing on the SCE theory. Then, the engineering model of penetration is presented using the SCE approach. The model …

Investigating The Production Of Cores By Using Reclaimed Foundry Green Sand, Kristopher Lee Boss

Dissertations and Theses @ UNI

Increasing environmental regulations, transportation cost, delivery interruptions leading to production concerns, disposal cost, and demand from other industries have influenced the way foundry’s view used sand. The purpose of this research was to determine a beneficial reuse of overflow-green sand that would normally be disposed. The reclamation process used is a combination of mechanical and wet reclamation. The focus was on the production of foundry cold box cores and if using this reclamation process could create a core with a similar quality performance compared to new sand. Research in reclamation could pave the way for a closed loop sand system, …

3d-Printed Biomimetic Bioactive Glass Scaffolds For Bone Regeneration In Rat Calvarial Defects, Krishna C. R. Kolan, Yue-Wern Huang, Julie A. Semon, Ming-Chuan Leu

Biological Sciences Faculty Research & Creative Works

The pore geometry of scaffold intended for the use in the bone repair or replacement is one of the most important parameters in bone tissue engineering. It affects not only the mechanical properties of the scaffold but also the amount of bone regeneration after implantation. Scaffolds with five different architectures (cubic, spherical, x, gyroid, and diamond) at different porosities were fabricated with bioactive borate glass using the selective laser sintering (SLS) process. The compressive strength of scaffolds with porosities ranging from 60% to 30% varied from 1.7 to 15.5 MPa. The scaffold's compressive strength decreased significantly (up to 90%) after …

A Study Of The Design And Manufacturing Of An Elevated Dog Feeder, Lena Turner

Honors Theses

ABSTRACT

The senior capstone which students in the Center for Manufacturing Excellence program partake in was the basis for project. The Dog Box is an elevated dog feeder with an internal food storage compartment. It was designed for medium to large dogs, and can hold over 40 lbs of dog food. The internal storage compartment has drawer access and contains a plastic tote that will hold the food. The purpose of the design was to create an aesthetically pleasing elevated dog feeder that would double as a storage device, and elevated feeding can help prevent health issues in large dog …

Faculty Instruction Face Shield Project, David Holden, John Schneiderhan

Michigan Tech 3D Designs

Early in the spring of 2020 project contributors David Holden and John Schneiderhan began test printing a variety of open source Personal Protective Equipment (PPE)/Covid related items that could help protect or prevent the spread of the emerging virus. With assistance from Pete Baril of the Western Upper Peninsula Health Department (WUPHD) approval was obtained for the face shields to be used in the health care and nursing homes in the area. With the support and approval from university and library administration efforts were coordinated with Dr. Joshua Pearce and the students from the MOST lab to concentrate on the …

Thermal Modeling Of Additive Manufacturing Using Graph Theory: Validation With Directed Energy Deposition, Jordan Severson

Department of Mechanical and Materials Engineering: Dissertations, Theses, and Student Research

Metal additive manufacturing (AM/3D printing) offers unparalleled advantages over conventional manufacturing, including greater design freedom and a lower lead time. However, the use of AM parts in safety-critical industries, such as aerospace and biomedical, is limited by the tendency of the process to create flaws that can lead to sudden failure during use. The root cause of flaw formation in metal AM parts, such as porosity and deformation, is linked to the temperature inside the part during the process, called the thermal history. The thermal history is a function of the process parameters and part design.

Consequently, the first step …

Advanced Mechatronics, Hao Su

Open Educational Resources

Project-based course on the design of mechatronic devices to address needs identified by hospital-based clinicians and industry. Students work in teams to develop a mechatronic prototype. The lectures will cover the design of medical devices and robotics including sensors, actuators, and robots. The students will communicate with customers to understand design needs, then conduct study on prior art, intellectual property, due diligence, and idea conceptualization. Students will present ideas in class and to a broad audience from local industry. Students will also write a publication-quality final report, which they will be encouraged for publication submission.

Investigation Of Manual Material Handling On Musculoskeletal Disorder At Computer Numerical Control Workstation, Abdullah Nor Suliani

Student Works (2020-2029)

Manual Material Handling (MMH) tasks have been recognized among the major source of work-related musculoskeletal disorder (WMSD) in automotive industry and they are commonly practiced at Computer Numerical Control (CNC) workstation. At this workstation, workers act as a material transfer device in the process of loading and unloading products from pallets to machines. The physical interaction of workers to machine is not self-chosen and workers are forced to follow the pace of running CNC machine. The worst situation happens when workers are required to operate more than one machine concurrently. The mismatch interaction between workers and machine exposes workers to …

Development Of A Finite Element Model Of The Stamping Process To Predict The Natural Frequencies Of Dimpled Beams, Varad Vasudeo Pendse

Masters Theses

Creating dimples on beams has been proven to be an effective way of altering their vibrational behavior. The objective of this research is to simulate the process of stamping using the finite element (FE) method to create a model of a dimpled beam. This dimple has non-uniform thickness, so it shows close agreement with its real-life counterpart.

ANSYS® Parametric Design Language (APDL) is used to build a three-dimensional (3-D) finite element model and simulate the process of stamping used to create the dimple. The structural simulation is validated by calculating the thickness and width of the deformed geometry of the …

Novel Methods For Composites Recycling Via Pyrolysis, Matt Jacobs

Undergraduate Honors Theses

Composites are unique materials in many respects. When fabric woven from carbon fibers is joined with a thermoset resin in a controlled environment, it results in a very strong material, especially evaluated on a pound-for-pound basis against metals and ceramics. One aspect of this construction that provides great strength lies in the fiber-matrix adhesion which facilitates load transfer to the reinforcement of the composite. This fiber-matrix adhesion is promoted by the polarity of the usual thermoset matrices, and properly designed sizing materials coating the fibers. It’s a two-edged sword, though. Although the resin and the fibers are quite strong together, …

Cal Poly Supermileage Dynamometer, Jacob Randall, Nate Deffenbaugh, Kyle Milgram

Mechanical Engineering

Our senior project involves designing a chassis dynamometer capable of simulating variable loads for the Cal Poly Supermileage Vehicle (SMV) team. The chassis dynamometer we are developing uses an alternator to develop additional resistance that the vehicle will have to overcome while testing. To implement a control system for the variable load, we use an Arduino Nano paired with multiple sensors and drivers. This control system allows the user to select different levels of resistance that correlate with different road grades. We designed a custom Printed Circuit Board (PCB) that will contain all the electrical components needed for the control …

Utilization And Standardization Of Beverage Based Containers, Michael T. Bobke, Jack C. Maughan, Kenia Vargas

Industrial and Manufacturing Engineering

The purpose of this document is to formally describe and explain all of the decisions associated with the data collection and analysis for this Cal Poly Senior Project. Throughout the project, we will utilize and hone the skills that each team member has developed during our time in Cal Poly's Engineering program. In addition, this document will briefly describe some of Blue Diamond’s history as one of the biggest almond companies in the world. The statement of work will introduce and describe the current status of the beverage base container process and international beverage container design. Next it will discuss …

Rebar Impalement Safety, Spencer C. Nefores, Steven M. Hoover

Industrial and Manufacturing Engineering

This project is sponsored by Webcor with the purpose of finding a better solution to rebar impalement safety. The current rebar impalement safety caps being used by Webcor were found to frequently fall off after being installed. This results in workers being exposed to the hazard for longer than desired. The research that has been done by the team showed that rebar impalement is a serious hazard and results in injury or death every year. Site visits and interviews were performed to aid in understanding the problem and designing solutions. The customer needs, current state of the problem, existing solutions, …

Parklets San Luis, Owen Kenny, Preston Jag Stebel, Leonidas Goodman, Lukas Braun

Industrial and Manufacturing Engineering

Downtown San Luis Obispo has been a popular destination for tourists, students, families, and roadtrippers. However, according to Ryan Betz, Interim Assistant to the City Manager, foot traffic and retail business revenue has been decreasing. Downtown SLO does not have enough free public spaces. Recent projects such as sidewalk bump outs and lighted crosswalks have aimed at making SLO more pedestrian accessible, but they have not actually made downtown more pleasurable. These projects have not seemed to drive any more business or traffic downtown. There are a myriad of ways to rectify this; studies show that having a free place …

Development And Experimental Investigation Of Modular Crates For Industrial Packaging Applications, Marshal Louie, Kumar B

Journal of Applied Packaging Research

For the increased product varieties, engineered plywood crate production technique could not facilitate box size optimization. This paper investigates the implementation of modularity function onto the plywood crate to resize the pack cube volume on customer requirement and to reduce space wastage inside the box. This is achieved by using a new joint technique called “Flat- Post Tongue Joint”. The full-sized experimental work is carried out comprising Flexural test analysis on Flat-Post Tongue joint, Tensile test analysis on tongue joint and Box Compression Test analysis on the two developed models of modular crates namely Modifiable Reinforced Plywood Crate (MRPC) and …

Asts Frame, Dustin Braun

All Undergraduate Projects

The automotive industry has been an industry of many breakthroughs in technology and mechanical systems over the course of its history. But in one area, its innovation has slowed. That is in the area of the short throw shifter. All aftermarket short throw shifters are currently one dimensional. No adjustability, no ability to finetune to one’s personal desire. The goal of this project is to create a short throw shifter frame that is easier/faster to install, as well as allow for full adjustability of the shifter from inside the car. This frame design uses mostly 6061-T6 aluminum, along with some …

Speed Bump Power Generator, Sultan Alanazi, Osamah Abulgaith

All Undergraduate Projects

A large amount of energy is wasted by the vehicles on the speed breakers through friction. Energy can be produced by using the vehicle weight and speed. The team proposes a smart speed breaker that generates power (Speed bump power generator). The device allows vehicles to pass from both sides. The system makes use of mechanical assembly with metal sheets with linkages that press down with spring arrangement. Using the motion and weight of vehicles was the method that the team relied on to design the device. The mass of the vehicles allows the top plate to move the rack …

Machine Learning In Manufacturing: Review, Synthesis, And Theoretical Framework, Ajit Sharma, Zhibo Zhang, Rahul Rai

Business Administration Faculty Research Publications

There has been a paradigmatic shift in manufacturing as computing has transitioned from the programmable to the cognitive computing era. In this paper we present a theoretical framework for understanding this paradigmatic shift in manufacturing and the fast evolving role of artificial intelligence. Policy, Strategic and Operational implications are discussed. Implications for the future of strategy and operations in manufacturing are also discussed. Future research directions are presented.

Composite Guitar, Ryn Rollins

All Undergraduate Projects

Traditional wood-bodied products such as boats, hockey sticks, and guitars can be easily chipped or cracked if not properly taken care of. The wood can absorb moisture and deteriorate over time. If that wood is replaced with composite materials, those products can become stronger, more lightweight, and resistant to temperature and corrosion. Two of the most popular composite materials are carbon fiber and fiberglass. Because these composite materials have such a high strength, the core of a guitar body can also be replaced with a lighter material such as Styrofoam which makes for a lighter and more durable guitar. The …

Rc Mini Baja Car - Suspension And Chassis, Collin Mckenzie

All Undergraduate Projects

Two students have developed a unique design of the RC Baja Car to optimize functionality and performance. A Baja car is a remote controlled 1/10 scale car that is used for recreation or competition, usually meant for competing in the ASME Baja car competition versus various schools. The competition focuses on the best time achieved in different courses that utilize speed, turns, and jumps. The objective for the project was to create a unique suspension from previous individual’s projects by creating a four-link suspension in which allows more travel in the suspension of the car and maintains functionality with the …

Next Generation Longboard Trucks Ng-Trucks, Zach J. Ducatt

All Undergraduate Projects

A device is needed that will provide longboard riders with a truck that is specifically designed for the sharp turns and high speeds they experience throughout their ride. This longboard truck must have a design that is engineered for these purposes and avoids the standard pin and bushing design that is commonly copied from the closely related skateboard truck. This standardized design is outdated, and more importantly, was made to adhere to the skateboard style of riding, consisting primarily of performing tricks with less turning. The longboard truck provides a secure connection point upon the two wheels and the board …

Forge Burner, Caleb Desjardins

All Undergraduate Projects

Can small scale blacksmithing operations achieve a level of efficiency in their forge comparable to that of a large scale industry? The causes for the lack of efficiency needed to be pinpointed, and then the geometry of the existing design for the burner could be changed to fix the underlying issues, while still maintaining functionality. The problems with the previous design is the geometry of the intake giving an unknown air/fuel ratio, and the attachment of to the forge allowing the intake air to be contaminated by exhaust gasses. A burner needed to be designed that would solve these problems …

R/C Mini Baja Car: Drive Train And Steering, Carlton R. Mcdonald

All Undergraduate Projects

The purpose of the Baja R/C Car is to compete in the ASME eFX competition in a series of events to prove the functionality of the vehicle. This series of events includes the Slalom, Drag, and Baja race, The Slalom is a test in the steering capability of the vehicle, the Drag is a test in the acceleration of the vehicle in a straight line, and the Baja puts all factors together in a race to test every component of the vehicle. This project is about building an R/C car that not only functions, but also has maximum performance capabilities …

Ev Clutch System, Jacob Yordy

All Undergraduate Projects

This project’s goal was to add a clutch system to an electrical vehicle at Central Washington University. The project’s second goal was to have the clutch system improve the electrical vehicle’s fuel economy for Electrathon events. Electrathon uses an equivalent mpg formula to determine an electrical vehicle’s “fuel economy.” Based on the amount of energy in kilo-Watt hours in a gallon of gas, Electrathon assumes each car uses 0.026 gallons of “gas” in the hour long race and the mpg value given to an electrical vehicle is based on the distance the vehicle travels in the race. Analyzes and problem …

Mechanical Footstep Power Generator, Mohammed Saleh Aljohani, Faisal Alonazi

All Undergraduate Projects

Mechanical Footstep Power generator

By Author: Mohammed Aljohani

Abstract

Modern technology is focusing on newer and better sources of energy. Among the important areas are power generation methods since electricity has become part of our lives. Various researchers have conducted surveys to find out the feasibility of converting renewable kinetic energy into electricity. Some of the works done in the past emphasized the selection of suitable materials and power generation systems designs that appear complicated and expensive. To ensure there is cost efficiency and energy efficiency better power generation systems need to be embraced.

The footstep power generator is a …

Design Of Banner Tow Mechanism For Bush Plane, Kyle Ciarrone, Ivan Martin, Rishabh Gadi, Tyler Brandt

Williams Honors College, Honors Research Projects

The 2019-2020 AIAA DBF objective was to design, build, and test a banner-towing bush plane that carries wooden passengers and luggage. Senior members on the team undertook the creation of the banner tow mechanism subsystem as their senior design project on behalf of the design team due to the challenge of its mechanical design and the aerodynamic considerations regarding its placement and enclosure aboard the aircraft. The competition as well as access to campus resources were canceled due to COVID-19, so full testing and integration of the mechanism was not achieved. However, the engineering design process was experienced from the …