Manufacturing Commons^™

Field-Assisted Post-Processing Of Cold-Sprayed Pure Copper, Alan Hensley

Theses and Dissertations--Mechanical and Aerospace Engineering

The properties of materials processed through cold spray, and many other AM processes, are non-uniform and unpredictable. In most cases, post-processing is required to achieve desired properties and better uniformity. In cold spray, the typical method is an annealing heat treatment (AHT), which can improve bond strength, reduce porosity, and restore ductility, among other effects. AHT alone, however, is unable to completely remedy any of the unfavorable properties. In addition, long treatments at high temperatures are often needed for satisfactory results. This increases energy consumption and extends production times for products made by the process. For these reasons, numerous investigations …

Process-Guided Learning Via Data-Driven Modeling And Controller Synthesis, Benton Clark

Theses and Dissertations--Mechanical and Aerospace Engineering

This work introduces process-guided learning, a framework in which process characteristics and learning algorithms are combined in the modeling process of engineering applications with the aim of uniting traditional and data-driven modeling and control techniques. Traditional engineering methods using simplified analytic models fail to capture the increasing complexities of engineering problems with sufficient accuracy to achieve modern requirements. More advanced modeling and control techniques using high-fidelity models often produce a computational burden that is infeasible for real-time solutions. Data-driven modeling offers a simple and flexible algorithm for producing real-time capable, high-fidelity models, but naive implementations lack the physical constraints of …

In-Situ Characterization Of Damage Mechanisms In Ceramic Matrix Composites, Cle' E. Sanchez

Theses and Dissertations--Mechanical and Aerospace Engineering

Ceramic Matrix Composites have many advantages, attracting the nuclear, aerospace, and automotive industries with their high heat stability, strength, and oxidation resistance. However, challenges are presented when machining these materials due to the brittle properties and complicated microstructure. The objective of this project was to identify damage mechanisms that occur when a CMC is orthogonally machined and the cutting mechanics are observed in-situ, followed by post-cut characterization of the as-machined surface morphology. In this analysis, the main variable is the feed rate, which can influence the damage mechanisms, such as matrix failure (matrix cracking) or fiber failure (pullout). Through this …

In-Situ Informed Modeling And Characterization Of Friction And Built-Up Edge In Machining Of Aerospace Alloys, Avery Hartley

Theses and Dissertations--Mechanical and Aerospace Engineering

Machining is by no means a new manufacturing process. However, it is separated from other traditional deformation processes by its extreme temperatures and strain rates. The function and life of a multitude of products and mechanical components are dependent on the material properties induced by changing the surface through machining. Furthermore, the tools used within machining are often expensive and material reserves are sparse. The understanding the mechanics of the machining process, especially related to the friction of the tool and workpiece, helps to further the life of tools and parts to minimize economic and environmental impact.

Current friction modeling …

Machining-Induced Residual Stress Modeling Using Physics-Informed Neural Networks, Md Mehedi Hasan

Theses and Dissertations--Mechanical and Aerospace Engineering

Process-induced residual stress (RS) plays a critical role in determining the structural integrity, fatigue life, corrosion resistance, and dimensional stability of manufactured components. Tensile residual stress can be harmful to the machined workpiece by lowering fatigue strength, while compressive residual stress helps to prevent such issues. Therefore, accurate prediction and control of machining-induced residual stresses are essential for optimizing manufacturing processes and enhancing component performance. However, existing modeling approaches—empirical, analytical, and numerical—often have limited predictive accuracy, demand extensive calibration, or involve high computational costs. Traditional finite element analysis (FEA) provides modeling insights but is constrained by its high computational cost …

Artificial Intelligence Enabled Machinery Fault Detection And Diagnosis Using Vibro-Acoustic Signals, Srinivasa Rao Ippili

Theses and Dissertations--Mechanical and Aerospace Engineering

In various industries, the early detection of faults in rotating machinery is crucial to prevent system failures and ensure customer satisfaction. Typically, vibration measurement and diagnosis are employed for fault detection, but this process faces challenges in automation due to the complexity of installing and maintaining accelerometers, particularly in end-of-line quality control or pre-installed machinery health assessments. Acoustic signals, as a form of mechanical wave, offer an alternative for monitoring machinery while in operation. Unlike accelerometers, acoustic transducers are non-contact and easy to set up, enabling real-time data collection without interrupting equipment operation. However, utilizing acoustic signals in manufacturing poses …

Anisotropic Material Behavior Of 3d Printed Fiber Composites, Jordan Garcia

Theses and Dissertations--Mechanical and Aerospace Engineering

Literature has shown that 3D printed composites may have highly anisotropic mechanical properties due to variation in microstructure as a result of filament deposition process. Laminate composite theory, which is already used for composite products, has been proposed as an effective method for quantifying these mechanical characteristics. Starting with the analysis of comparing the printing orientation of premanufactured carbon fiber reinforced filament, the mechanical properties of 3D printed objects were examined. The mechanical properties changed not only as a result of machine choice, but how the sample is oriented along the printing bed. The analysis continued with looking at the …

Machine Learning For Advancing Automation And Quality Control In Robotic Welding, Joseph Kershaw

Theses and Dissertations--Mechanical and Aerospace Engineering

Welding is a vital manufacturing process across a diverse range of industries to permanently join metallic components into needed assemblies. Though widely used and studied, the process is not fully understood due to the myriad of interconnected physics that present themselves during the welding process. Electrical, thermal, structural, and fluidic mechanics are simultaneously at work influencing one another to achieve the bonding that manufacturers desire. In addition to general manufacturing issues, such as tool wear or misalignment, micro-level changes to the material structure and composition can have cascading impacts on the final weld. This complexity makes it difficult, if not …

Energy And Economic Modeling Of Stillage Dewatering Processes In Kentucky Bourbon Distilleries, William Brennan

Theses and Dissertations--Mechanical and Aerospace Engineering

Stillage is a byproduct of alcohol distillation and must be managed in all distilleries to sustain operations. In the United States, fuel ethanol plants typically convert all stillage into Dried Distillers’ Grains with Solubles (DDGS). This process and its variations are well known. Typical stillage management approaches are not well known, however, for the Kentucky bourbon industry. A survey of stillage management approaches in operational bourbon distilleries was conducted. Process modeling was performed to evaluate the energy and economic considerations of the available stillage dewatering methods for a 7 Million Original Proof Gallon (MMOPG) distillery. Monte Carlo simulations were performed …

Quantitative Methods For Total Lifecycle Risk Likelihood And Impact Assessment In Sustainable Product Design Decision Making, Christian Enyoghasi

Theses and Dissertations--Mechanical and Aerospace Engineering

Sustainable products promise significant economic, environmental, and societal benefits. Numerous methods are available for use during the new product development process to identify alternate product designs that optimize sustainability performance. Once any such design is selected and the product is launched, many uncertainties are likely to affect its performance over the total lifecycle. Such uncertainties give rise to risks that can influence the overall product sustainability performance. However, comprehensive quantitative methods to evaluate the likelihood or the impact of different risks to enable sustainable product design decision making are lacking.

This research aims to address this gap by developing a …

In-Situ Characterization Of Surface Quality In Γ-Tial Aerospace Alloy Machining, David Adeniji

Theses and Dissertations--Mechanical and Aerospace Engineering

The functional performance of critical aerospace components such as low-pressure turbine blades is highly dependent on both the material property and machining induced surface integrity. Many resources have been invested in developing novel metallic, ceramic, and composite materials, such as gamma-titanium aluminide (γ-TiAl), capable of improved product and process performance. However, while γ-TiAl is known for its excellent performance in high-temperature operating environments, it lacks the manufacturing science necessary to process them efficiently under manufacturing-specific thermomechanical regimes. Current finish machining efforts have resulted in poor surface integrity of the machined component with defects such as surface cracks, …

In-Situ Characterization Of Burr Formation In Finish Machining Of Inconel 718, Hamzah M. Zannoun

Theses and Dissertations--Mechanical and Aerospace Engineering

One of the undesirable byproducts that occur during the machining process is the development of burrs, which are defined as rough excess material that forms around the geometric discontinuities of a part. Burrs are especially problematic because they have negative impacts across the triple bottom line: economic, environmental, societal. For one, they are expensive to remove because the deburring process is entirely manual and requires skill. Further, burr material is typically discarded which is adding to the already mounting waste generated from machining such as in coolant and chip disposal. Lastly, there are many societal implications, such as operator injury …

Balancing Trade-Offs In One-Stage Production With Processing Time Uncertainty, Jingjing You

Theses and Dissertations--Mechanical and Aerospace Engineering

Stochastic production scheduling faces three challenges, first the inconsistencies among key performance indicators (KPIs), second the trade-offs between the expected return and the risk for a portfolio of KPIs, and third the uncertainty in processing times. Based on two inconsistent KPIs of total completion time (TCT) and variance of completion times (VCT), we propose our trade-off balancing (ToB) heuristic for one-stage production scheduling. Through comprehensive case studies, we show that our ToB heuristic with preference =0.0:0.1:1.0 efficiently and effectively addresses the three challenges. Moreover, our trade-off balancing scheme can be generalized to balance a number of …

Tailoring Texture, Microstructure, And Shape Memory Behavior Of Niti Alloys Fabricated By L-Pbf-Am, Sayed Ehsan Saghaian N.E.

Theses and Dissertations--Mechanical and Aerospace Engineering

Laser Powder Bed Fusion (L-PBF) is one of the most promising Additive Manufacturing (AM) methods to fabricate near net-shape metallic materials for a wide range of applications such as patient-specific medical devices, functionally graded materials, and complex structures. NiTi shape memory alloys (SMAs) are of great interest due to a combination of unique features, such as superelasticity, shape memory effect, high ductility, work output, corrosion resistance, and biocompatibility that could be employed in many applications in automotive, aerospace, and biomedical industries. Due to the difficulties with traditional machining and forming of NiTi components, the ability to fabricate complex parts, tailor …

Redesigning Products To Optimize Sustainable Performance In Multi-Generational Closed-Loop Production For Advancing The Circular Economy, Buddhika Minendra Hapuwatte

Theses and Dissertations--Mechanical and Aerospace Engineering

Sustainable manufacturing and the circular economy concepts promote efficient and effective resource use to minimize the adverse economic, environmental, and social impacts of alarmingly increasing consumption rates. Product design is the key to implement these transformations in manufacturing. However, the currently available sustainable and circular design methods are not comprehensive and inadequate—especially for multi-generational products. Therefore, designing sustainable products optimized for circular and closed-loop production systems is a challenging task. The 6Rs concept introduced ‘Redesign’ to modify a product’s engineering specifications and allow sustainable utilization of the end-of-use resources from previous generations, thus closing the production loop. Therefore, the objective …

Additive Manufacturing In Personalized Medicine: Patient-Customized Solid Dose Medicines, And Patient-Customized Wound Care Device, Amir Najarzadeh

Theses and Dissertations--Mechanical and Aerospace Engineering

Personalized Medicine - from a one-size fits all to a tailored approach is the future in pharmaceutical therapeutics and medical applications. The aim of this study is demonstrate additive manufacturing in two personalized medicine applications: 1. Patient- customized solid dose medicines, and 2. Patient-customized wound care device. The aim of the first application is to develop an inexpensive and accurate method to design and fabricate patient-customized tablets. Particularly this paper focuses on fabricating and dose controlling of patient-customized extended release prednisolone-poly(vinyle alcohole) PVA. Dry-Blending, Wet Granulation, Extrusion, Spherionization, Hot melt extrusion (HME) was adopted to produce drug loaded prednisolone-PVA filaments …

Molten Aluminum Capillary Hole-Filling, Cheng-Nien Yu

Theses and Dissertations--Mechanical and Aerospace Engineering

The presence of micrometeoroids and space debris in open space raises the question of a mitigation of the damage caused by a possible impact on the man-made structures such as space shuttles, satellites, and the International Space Station. A method achieving metallic sealed hole would be of an interest for development. This dissertation studies a surface tension driven capillary filling/sealing phenomenon in a controlled atmosphere brazing process of aluminum. The filled vs. non-filled results are predictable using minimization of energy, which shows that the outcomes depend heavily on prescribed configurations of the hole. Equilibrium models show excellent agreement with experimental …

Stress Generation In Ni50.3Ti29.7Hf20 Shape Memory Alloys, Utsav Shah

Theses and Dissertations--Mechanical and Aerospace Engineering

Shape memory alloys such as NiTiHf and NiTi have the ability to generate large recovery stresses when they are constrained after pre-straining and then heated above their Austenite Finish Temperature (A_f). In this work Ni_49.9Ti_50.1 (at.%), the most well-known SMA with impressive shape memory properties but limited temperature range and Ni_50.3Ti_29.7Hf₂₀, a promising high temperature shape memory alloy, were characterized to reveal their stress generation capabilities. The effects of pre-straining on stress generation were investigated via martensite reorientation method of NiTi and NiTiHf alloys by loading the samples till …

The Influence Of Cryogenic Machining On Surface Integrity And Functional Performance Of Titanium Alloys For Biomedical And Aerospace Applications, Ying Sun

Theses and Dissertations--Mechanical and Aerospace Engineering

The excellent properties of titanium alloys such as high strength, as well as good corrosion and fatigue resistance are desirable for the biomedical and aerospace industry. However, the same properties that make titanium alloys desirable in high-performance applications also make these space-age materials “difficult-to-machine” materials, as the titanium alloys exhibit high cutting temperatures because of their high strength and low thermal conductivity.

Cryogenic machining is a severe plastic deformation (SPD) processes which uses liquid nitrogen as the coolant to take away the heat generated during machining in a relatively short time. Cryogenic machining can significantly reduce the cutting temperatures at …

Influence Of Size Effects On Surface Generation During Finish Machining And Surface Integrity In Ti-6al-4v, Ian S. Brown

Theses and Dissertations--Mechanical and Aerospace Engineering

Finish machining is an essential manufacturing process that is used to enhance the mechanical characteristics of critical components. The deformation that occurs at the tool and workpiece interface in finish machining significantly affects a host of component properties, commonly referred to as “surface integrity” properties. Surface roughness is a machining deformation-affected characteristic that is of high relevance in contemporary manufacturing. However, over recent decades it has been made clear that the material properties of the deformed surface layers are relevant to component performance as well. Predicting the overall surface quality of a machined component is of great relevance to the …

Enhanced Surface Integrity With Thermally Stable Residual Stress Fields And Nanostructures In Cryogenic Processing Of Titanium Alloy Ti-6al-4v, James R. Caudill

Theses and Dissertations--Mechanical and Aerospace Engineering

Burnishing is a chipless finishing process used to improve surface integrity by severe plastic deformation (SPD) of surface asperities. As surface integrity in large measure defines the functional performance and fatigue life of aerospace alloys, burnishing is thus a means of increasing the fatigue life of critical components, such as turbine and compressor blades in gas turbine engines. Therefore, the primary objective of this dissertation is to characterize the burnishing-induced surface integrity of Ti-6Al-4V alloy in terms of the implemented processing parameters. As the impact of cooling mechanisms on surface integrity from SPD processing is largely unexplored, a particular emphasis …

Transforming A Circular Economy Into A Helical Economy For Advancing Sustainable Manufacturing, Ryan T. Bradley

Theses and Dissertations--Mechanical and Aerospace Engineering

The U.N. projects the world population to reach nearly 10 billion people by 2050, which will cause demand for manufactured goods to reach unforeseen levels. In order for us to produce the goods to support an equitable future, the methods in which we manufacture those goods must radically change. The emerging Circular Economy (CE) concept for production systems has promised to drastically increase economic/business value by significantly reducing the world’s resource consumption and negative environmental impacts. However, CE is inherently limited because of its emphasis on recycling and reuse of materials. CE does not address the holistic changes needed across …

Trade-Off Balancing For Stable And Sustainable Operating Room Scheduling, Amin Abedini

Theses and Dissertations--Mechanical and Aerospace Engineering

The implementation of the mandatory alternative payment model (APM) guarantees savings for Medicare regardless of participant hospitals ability for reducing spending that shifts the cost minimization burden from insurers onto the hospital administrators. Surgical interventions account for more than 30% and 40% of hospitals total cost and total revenue, respectively, with a cost structure consisting of nearly 56% direct cost, thus, large cost reduction is possible through efficient operation management. However, optimizing operating rooms (ORs) schedules is extraordinarily challenging due to the complexities involved in the process. We present new algorithms and managerial guidelines to address the problem of OR …

Analysis Of Surface Integrity In Machining Of Cfrp Under Different Cooling Conditions, Arjun Nagaraj

Theses and Dissertations--Mechanical and Aerospace Engineering

Carbon Fiber Reinforced Polymers (CFRP) are a class of advanced materials widely used in versatile applications including aerospace and automotive industries due to their exceptional physical and mechanical properties. Owing to the heterogenous nature of the composites, it is often a challenging task to machine them unlike metals. Drilling in particular, the most commonly used process for component assembly is critical especially in the aerospace sector which demands parts of highest quality and surface integrity.

Conventionally, all composites are machined under dry conditions. While there are drawbacks related to dry drilling, for example, poor surface roughness, there is a need …

Design And Process Of 3d-Printed Parts Using Composite Theory, Jordan Garcia

Theses and Dissertations--Mechanical and Aerospace Engineering

3D printing is a revolutionary manufacturing method that allows the productions of engineering parts almost directly from modeling software on a computer. With 3D printing technology, future manufacturing could become vastly efficient. However, it is observed that the procedures used in 3D printing differ substantially among the printers and from those used in conventional manufacturing. In this thesis, the mechanical properties of engineering products fabricated by 3D printing were comprehensively evaluated and then compared with those made by conventional manufacturing. Three open-source 3D printers, i.e., the Flash Forge Dreamer, the Tevo Tornado, and the Prusa, were used to fabricate the …

Regression Analysis Of Factors Impacting Problem Solving Engagement Within Lean Systems Implementation, David M. Parsley Ii

Theses and Dissertations--Mechanical and Aerospace Engineering

Organizations around the world have attempted to implement the concepts of the Toyota Production System (TPS), commonly referred to as Lean, with limited sustainable success. The central principles of TPS, continuous improvement and respect for people, are grounded in the Japanese values of Monozukuri and Hitozukuri. Monozukuri deals with creating or making a product, while Hitozukuri conveys the idea of developing people through learning. In order for organizations to adopt these values they must have a system that engages employees at all levels in applying problem solving to improve their work. This research uses organizational assessments obtained from a variety …

Bayesian-Integrated System Dynamics Modelling For Production Line Risk Assessment, Sudhir Punyamurthula

Theses and Dissertations--Mechanical and Aerospace Engineering

Companies, across the globe are concerned with risks that impair their ability to produce quality products at a low cost and deliver them to customers on time. Risk assessment, comprising of both external and internal elements, prepares companies to identify and manage the risks affecting them. Although both external/supply chain and internal/production line risk assessments are necessary, internal risk assessment is often ignored. Internal risk assessment helps companies recognize vulnerable sections of production operations and provide opportunities for risk mitigation.

In this research, a novel production line risk assessment methodology is proposed. Traditional simulation techniques fail to capture the complex …

The Kentucky Re-Entry Universal Payload System (Krups): Sub-Orbital Flights, James Devin Sparks

Theses and Dissertations--Mechanical and Aerospace Engineering

The Kentucky Re-entry Universal Payload System (KRUPS) is an adaptable testbed for atmosphere entry science experiments, with an initial application to thermal protection systems (TPS). Because of the uniqueness of atmospheric entry conditions that ground testing is unable to replicate, scientists principally rely on numerical models for predicting entry conditions. The KRUPS spacecraft, developed at the University of Kentucky, provides an inexpensive means of obtaining validation data to verify and improve these models.

To increase the technology readiness level (TRL) of the spacecraft, two sub-orbital missions were developed. The first mission, KUDOS, launched August 13th, 2017 on a Terrier-Improved Malamute …

Adaptive Scheduling For Operating Room Management, Honghan Ye

Theses and Dissertations--Mechanical and Aerospace Engineering

The perioperative process in hospitals can be modelled as a 3-stage no-wait flow shop. The utilization of OR units and the average waiting time of patients are related to makespan and total completion time, respectively. However, minimizations of makespan and total completion time are NP-hard and NP-complete. Consequently, achieving good effectiveness and efficiency is a challenge in no-wait flow shop scheduling. The average idle time (AIT) and current and future idle time (CFI) heuristics are proposed to minimize makespan and total completion time, respectively. To improve effectiveness, current idle times and future idle times are taken into consideration …

The Limits & Effects Of Draw On Properties And Morphology Of Pan-Based Precursor And The Resultant Carbon Fibers, Sarah Edrington

Theses and Dissertations--Mechanical and Aerospace Engineering

The process, structure, and property relationship of PAN fiber as a precursor to carbon fiber was studied. The limitations of stable spinning and property improvement associated with hot draw in solution spinning were found and quantified. Conditions were varied to generated precursor fiber up to the limit of draw, from which actual samples were collected for thermal conversion to carbon fiber. Samples of PAN and subsequent carbon fiber were characterized using tensile testing and x-ray analysis. The effects of draw on modulus and break stress, as well as the orientation of the crystalline structure of both parent precursor and resultant …