Manufacturing Commons^™

Sla Elastic Resin Curing Test Data, Richard Amesimenu, Johnson Nwogu, Haijun Gong

Datasets

3D printing via stereolithography (SLA) enables high-resolution polymer components, but as-printed parts may exhibit incomplete polymerization and reduced mechanical performance. This study investigates the effects of UV post-curing time on SLA-printed elastic photopolymer resin. Specimens were evaluated using Differential Scanning Calorimetry (DSC), uniaxial tensile testing (ASTM D412 Type C), and Durometer Type M hardness testing. Results show that increased post-curing enhances crosslink density, tensile strength, elastic modulus, and hardness, while extended curing may reduce ductility. An optimal post-curing window balancing stiffness and flexibility was identified. Testing datasets include DSC (dsc/), tensile testing (tensile/), and hardness testing (hardness/) results for uncured …

Effect Of Wall Movement On Porosity Formation In Ductile Iron Castings Under Varying Processing Parameters, Shamsul Alam

College of Graduate Studies: Theses & Dissertations

Shrinkage porosity is a major defect that significantly impairs the mechanical properties and overall performance of ductile iron castings. Although graphite formation during solidification induces volumetric expansion, this expansion alone is insufficient to fully compensate for the shrinkage occurring throughout solidification. During the solidification and cooling of ductile iron, multiple phase transformations occur, resulting in dynamic volume changes that exert pressure on mold walls and internal cavities. These pressures can deform mold walls and casting surfaces, leading to defects such as swell and porosity, while also influencing shrinkage formation. This study aims to analyze the mechanisms of porosity formation and …

Ease Of Product Disassembly Through A Systematic Structured Time-Based Design For Disassembly Methodology, Emeka S. Igwe

College of Graduate Studies: Theses & Dissertations

This research introduces a systematic time-based design for disassembly (DfD) framework aimed at optimizing product disassembly by addressing important features like liaisons between components in product, component accessibility and the overall modularity of the product. This study specifically covers electromechanical and mechatronic systems in both household and industrial setup, identifying their disassembly challenges and high value pointers for improvement. The methodology involves using a design for disassembly framework called LeanDfD in carrying out a holistic disassembly process and evaluating quantitative metrics like disassembly time and complexity and suggesting further redesign strategies to minimize disassembly time and cost. Adopting this systematic …

Ranking Of Non-Destructive Testing Methods For Ductile Iron Castings For Industry 4.0, Michael W. Jones

College of Graduate Studies: Theses & Dissertations

Non-destructive testing techniques provide a unique solution to provide quality assurance of parts rapidly and efficiently without altering the functional properties of the workpiece. The metal casting industry requires an elevated level of quality assurance, as castings are critical components to several industries. The wrong selection of non-destructive testing methods could increase production costs, quality costs, and potentially permit non-conforming castings to enter the market. The aim of this research is to develop a ranking model for non-destructive testing techniques for ductile iron castings within the context of the fourth industrial revolution. The ranking model analyzes the effectiveness of the …

Pulsed Arc Additive Manufacturing Of A Functionally Graded Er2209 Duplex Stainless Steel And Hsla-100 Structure: Morphology, Characterization, And Mechanical Performance, Stevens G. Hill Jr

College of Graduate Studies: Theses & Dissertations

Wire arc additive manufacturing is a process well suited to the efficient production of large structures. Duplex stainless steel exhibits high corrosion resistance and good strength which can be highly beneficial for industrial use. However, its use is limited due to its cost and complexity in controlling microstructure to achieve desired properties. In many cases, it can be highly beneficial to manufacture a component which uses specialty steel grades such as duplex stainless steel only where necessary, and utilizes more affordable, commonly available steels for reinforcement or bulk structural support. A functionally graded material satisfies these requirements by providing a …

Effect Of Alloying Additions On Austenite Refinement In Nickel-Alloyed Ductile Cast Irons, Adnan Adib Aahamed

College of Graduate Studies: Theses & Dissertations

The benefits associated with the application of ductile irons are significantly attributed to the control of microstructures, with refinement of austenitic matrix during solidification playing a significant role. Nickel alloyed ductile irons are attractive due to their potential for high ductility and suitability for potential high-temperature applications with stable austenitic microstructure. Refinement of austenite grain structure is thus important to enhance the mechanical properties of the alloyed ductile iron. This research investigates the impact of in-mold additions of different alloying elements on the austenite morphology and grain refinement of nickel-alloyed ductile iron along with the associated mechanical properties. A hypoeutectic …

Enhancing The Mechanical Properties Of Sla 3d-Printed Bio-Resin From Linseed Oil Using Cellulose And Lignin Biopolymers, Chukwunonso A. Ikedionu

College of Graduate Studies: Theses & Dissertations

Abstract

This research explores the development of bio resin from linseed oil by the process of epoxidation and acrylation to produce acrylated epoxidized linseed oil (AELO). Lignin and cellulose biopolymers were added as reinforcement at varying weight fractions of 1 wt.%, 2.5 wt.%, and 5 wt.%, and their mechanical performance was compared against pure AELO. The formulations were printed using an Elegoo SLA 3D printer to create standardized test specimens like tensile bars, compression cylinders, and hardness blocks, which were all prepared according to the ASTM testing standard.

The results indicate that reinforcement effects depend on both filler type and …

Resonant Ultrasound Spectroscopy(Rus) For Material Characterization Of Metal Am Parts, Malik Marks

College of Graduate Studies: Theses & Dissertations

Additive manufacturing (AM) has revolutionized the manufacturing industry by offering flexibility, customization, and rapid prototyping capabilities. However, ensuring the quality and reliability of AM parts remains a significant challenge due to variations in material properties and process parameters. The NDE method used in this study is Resonant Ultrasound Spectroscopy (RUS). This method was used to evaluate and understand its ability to detect internal voids and defects. Dog-bone samples were made using the 316L stainless steel alloy which were fabricated by powder bed fusion (PBF) AM technique at different processing conditions and post processing conditions. These samples were tested to find …

Understanding The Impact Of Process Interruption On Mechanical Properties In Metal Additive Manufacturing: A Comprehensive Investigation, Poojith C. Chigurupati

College of Graduate Studies: Theses & Dissertations

Metal additive manufacturing techniques enable rapid prototyping and on-demand manufacturing while improving supply chain resiliency. Changes in microstructure and micro-mechanical characteristics of 3D printed metal parts occur due to the influence of process interruptions on melting-solidification cycles during the layer evolution in additive manufacturing processes. The process interruption can deteriorate the structural integrity of the 3D printed parts and generate micro-flaws in the interruption region. Manufacturing post-processing techniques such as Heat-Treatment methods can enhance the mechanical properties of the parts. Since variations commonly happen at the layer level, the investigation of mechanical properties must be done such that these variations …

Development And Characterization Of Vegetable Oil Based, Acrylated Resins For Stereolithography 3d Printing, Julius A. Adeyera

College of Graduate Studies: Theses & Dissertations

The increase in the demand for additively manufactured parts and the drive towards a sustainable economy with less environmental pollution has necessitated the need for renewable materials for use in 3D printing. This study shows the development and characterization of vegetable oil based, acrylated resins for 3D printing. Bio-based 3D resins were formulated using bio-based oils with a minimum of 70% bio-based content and were ready to be polymerized using the stereolithography (SLA) 3D printing process. Two distinct vegetable oils were used to develop biobased photopolymers. Biobased acrylated epoxidized photopolymers were successfully developed that have good mechanical and chemical properties. …

Experimental Investigation Of Liquid Metal Embrittlement In Hot-Dip Galvanized Structural Steel, Amelia Mcnamee

College of Graduate Studies: Theses & Dissertations

This research investigated the liquid metal embrittlement (LME) of hot-dipped galvanized structural steel. The relationship between stress and failure time was analyzed to evaluate the potential presence of a critical stress threshold beyond which LME may occur. A testing apparatus to induce axial stress was designed and assembled in-house. A36 low carbon steel was tested in this study. Different deadweight loadings were applied to the testing sample along the axial direction. The test temperature was maintained by a programmable furnace while the sample gauge section was submerged in a molten zinc bath. Failure time and total displacement of the steel …

A Proof-Of-Concept Study For An Elastohydrodynamic Seal Design, Cameron M. Stuart

Honors College Theses

Supercritical CO₂ (sCO₂) power cycles are superior to traditional water based, air-breathing, direct-fired, open Brayton cycles or indirect-fired, closed Rankine cycles in terms of efficiency and equipment size. They hold great potential in fossil fuel power plants, nuclear power production, solar power, geothermal power, and ship propulsion. To unlock the potential of sCO₂ power cycles, utilized technology must withstand 10–600 MWe and at sCO₂ temperatures and pressures of 350–700℃ and 20–35 MPa for nuclear industries. Amongst many challenges at the component level, the lack of suitable shaft seals for sCO₂ operating conditions needs to …

Cycle Time Reduction In Additive Manufacturing Using Peltier Thermoelectric Cooling Devices, Trevor Carlton

Honors College Theses

Thermoelectric cooling and the Peltier effect were discovered in 1834, over 188 years ago. Additionally, the first iterations of additive manufacturing (i.e., 3D printing) began in the early 1980s, more than 40 years ago. Despite these technologies’ age and years of advancements, the application of Peltier cooling-based devices in additive manufacturing has not yet been realized. These devices can be used for the active thermal management of print beds in 3D printers. Developing a mechanism to heat and cool a print bed can reduce the cycle time to manufacture a part. In 3D printing, waiting for the heated bed to …

Structural Design And Fabrication Of A Test Chamber To Test Ppes For Effective Particle Filtration, Matthew G. Adharsingh

Honors College Theses

This research project aims to design and fabricate a test chamber for testing Personal Protective Equipment (PPE) to ensure effective particle filtration. The chamber has a special purpose, which is to measure ultrafine and submicron particles concentration in the air and test the ergonomic design of PPE based on its effective filtration. The project also considers the environmental aspects of the chamber such as the level of noise and vibration. The chamber will be designed to measure upstream and downstream particle count. Initially, the chamber was going to be made from wood, but the research team encountered difficulties in the …

Investigation Of Manufacturing Techniques For Magnetorheological Elastomers To Expand Feasibility In A Diverse Array Of Applications, Austin S. Robbins

College of Graduate Studies: Theses & Dissertations

Magnetorheological elastomers, or MREs, are smart composite materials with controllable physical and mechanical properties when introduced to an external stimulus of a magnetic field. The controllability of these properties is highly tunable by the selection of the elastomeric matrix, concentration of magnetically permeable particles, introduction of additives, and the alignment of the constituents during the curing process. The fabrication of MREs typically calls for a mold that is filled with an MRE mixture to create the final desired geometry after curing. These molds are frequently placed under a magnetic field which orients the micron sized magnetic particles along the magnetic …

An Experimental Study On The Mechanical Properties And Chemical Composition Of Lcd 3d Printed Specimens, Sebastian Gomez

College of Graduate Studies: Theses & Dissertations

Additive manufacturing technologies have been enhanced throughout the years yet have surprised the manufacturing industry due to their high-end surface finish and dimensional accuracy. Different experiments have been done to identify a specific phenomenon known in the vat-polymerization field. Distortion and dimensional inaccuracy tend to affect the overall properties of the process, either physical or chemical. This approach allows the understanding of how the physical properties have been affected and how to study the chemical properties to avoid this type of phenomenon. The chemical reaction between polymer and UV light has been studied and experimented with to the point that …

Design And Fabrication Of A Force-Displacement Control Mechanism For Bone-Surgical Tool Testing, Kenneth Nwagu

College of Graduate Studies: Theses & Dissertations

This project focuses on the design and fabrication of an experimental setup for orthopedic-tool testing, tailored for a surgical instrumentation company. The multifaceted project encompasses a literature review, conceptual design, prototyping, and rigorous testing, resulting in a versatile control system capable of assessing various orthopedic tools, including bone drills, saws, burrs, and power handpieces.

Orthopedic surgical procedures (which include cutting and/or drilling into bone) often need to be performed on bones for faster recovery. The drilling and cutting process can cause an increase in temperature at the cutting site which can cause bone necrosis. The tools also need to be …

Robotic Manufacturing System For Unattended Machining And Inspection Of Graphite Bipolar Flow Field Plates For Proton Exchange Membrane Fuel Cells, Vladimir Gurau, Ryan Kent

Manufacturing Engineering: Faculty Publications (2015-2023)

A single robot-based manufacturing system for unattended machining and inspection of graphite bipolar flow field plates for proton exchange membrane fuel cells is designed and integrated for demonstration and validation. Unlike most robotic manufacturing systems where an industrial robot is used for tending an automated tool such as a computer numerical control machine, in the present system the industrial robot performs all manufacturing operations, including machining the flow fields on both sides of the plates, changing the tools, handling the plates, vacuuming the plates and the workholding device of graphite dust, flipping the plates, air blowing them and performing machine …

Application Of Phased Array Eddy Current (Paec) Nondestructive Technology For Stress Corrosion Cracking (Scc), Cameron A. Jones

GS4 Student Scholars Symposium

Stress Corrosion Cracking (SCC) is the constant growth of a crack or fault due to the tensile and corrosive stresses in a given environment. These cracks can potentially progress to sudden and catastrophic failures in metals exposed to tensile stress and corrosive environment. The over-whelming cost and damage caused by Stress Corrosion Cracking (SCC) is an immense amount of cost in many industries considering that SCC happens to produce a spontaneous failure due to overload stress. The topic of stress corrosion cracking has drastically changed the movement and progression of the production of better-quality products and engineering design such as, …

Effects Of Varied Oxygen Levels, Laser Powers, And Scanning Speeds On Manufactured Components By Laser-Based Powder Bed Fusion, Amelia Mcnamee

Honors College Theses

This project addresses the effects of oxygen concentration, laser power, and scanning speed on the melt pool geometry of laser-based powder bed fusion (L-PBF) additively manufactured components. A parametric analysis using the substrate alone was conducted to determine a range of desirable laser powers and scanning speeds. The parameter with the more significant effect will be decided upon based on the depth-to-width ratios (D/W) of the resultant laser weld bead. A range of oxygen levels and scan speeds was selected for the next phase. These samples were then be analyzed for depth-to-width ratios. It was expected that higher oxygen concentrations …

A Study Of Reduced Activation Ferritic Martensitic Metal Core Wire For Wire Arc Additive Manufacturing, Alexander L. Reichenbach

College of Graduate Studies: Theses & Dissertations

This study seeks to determine the technical feasibility of fabricating reduced activation ferritic martensitic (RAFM) steel parts, using a wire arc additive manufacturing (WAAM) process. The WAAM process, manufactures a part by depositing layers of metal onto a substrate to build a large scale near net shape part. RAFM alloy steels are next generation steels designed to resist radiation effects in the radiation intense working environments, such as nuclear reactors. To achieve this, process development and testing to design the WAAM production process with the custom RAFM filler wire was carried out. Several welding waveform modes were tested, and it …

Effects Of Titanium And Cerium Addition On Grain Size And Mechanical Properties Of Ductile Iron Castings, Shelton F. Fowler Iv

College of Graduate Studies: Theses & Dissertations

According to the Hall-Petch equation, the refinement of grains in metals increases the yield strength of the material. Austenite grain size influences the fineness of microstructural constituents in the ferrous alloys. It is well studied that cerium and titanium refine the austenite in steels and some gray irons, but no studies have been done to systematically explore the effects of cerium and titanium additions on austenite in ductile iron. This study sought to determine the effects of selected levels of these elements on the grain size within ductile iron. A hypoeutectic iron was chosen for testing as the proeutectic phase …

Mechanical Properties Of Nanomodified Hybrid Gfrp Composite Materials, Micah Rop Kimutai

College of Graduate Studies: Theses & Dissertations

The mechanical behavior of the nanomodified hybrid epoxy matrix was investigated in glass fiber reinforced plastics (GFRP). In this study, five nanocomposites enriched with as received halloysite, nanomer I.28E, HNT-APTES, and the hybrid combinations of the two HNTs with the nanomer I.28E were successfully fabricated. To evaluate the effects and morphological characteristics of the individual fillers and the hybrid configurations on the epoxy resin matrix, TGA, DSC, and DMA were analyzed. To understand the effect of the five configurations on the neat GFRP laminate, mode I interlaminar fracture toughness, tensile, and vibration properties were investigated. Electron microscopy testing techniques were …

In-Situ Process Monitoring For Metal Additive Manufacturing (Am) Through Acoustic Technique, Md Shahjahan Hossain

College of Graduate Studies: Theses & Dissertations

Additive Manufacturing (AM) is currently a widely used technology in different industries such as aerospace, medical, and consumer products. Previously it was mainly used for prototyping of the products, but now it is equally valuable for commercial product manufacturing. More profound understanding is still needed to track and identify defects during the AM process to ensure higher quality products with less material waste. Nondestructive testing becomes an essential form of testing for AM parts, where AE is one of the most used methods for in situ process monitoring. The Acoustic Emission (AE) approach has gained a reputation in nondestructive testing …

The Development Of A Holistic Quality Score Using In-Situ Monitoring Of Laser Powder Bed Fusion, Ryan Daigneault

College of Graduate Studies: Theses & Dissertations

Additive manufacturing processes allow for a great degree of flexibility in terms of part production. The process is autonomous once the part has started printing in that the operator generally does not need to intervene until the part is finished. One issue that this introduces, however, is an inability to determine part quality during the printing process. Once a part has started printing, the operator must either wait until the part is finished or regularly check on the part during the print to determine the part quality. Using data gathered from multiple sensors, a quality score can be used to …

Reclamation Of Fused Silica From Investment Shells Used For Casting Steel, Samuel L. Holt

College of Graduate Studies: Theses & Dissertations

Fused silica is widely used for investment casting shell molds. Fused silica shells are discarded after being used for casting one time. This is due to the transformation of fused silica to beta cristobalite above 1652℉ (900℃). To reduce cost and waste of investment casting foundries, this study is exploring a method to inhibit transformation of fused silica and reclaim it from high temperature investment casting shells. This research has employed firing to minimalize fused silica transformation to cristobalite. The phase transformation is minimalized due to sintering and coarsening of the particles during firing. Coarsening reduces surface area to volume …

Design And Development Of Soft Earthworm Robot Driven By Fibrous Artificial Muscles, Beau Ragland

College of Graduate Studies: Theses & Dissertations

Earthworm robots have proven their viability in the fields of medicine, reconnaissance, search and rescue, and infrastructure inspection. These robots are traditionally typically hard-shelled and must be tethered to whatever drives their locomotion. For this reason, truly autonomous capabilities are not yet feasible. The goal of this thesis is to introduce a robot that not only sets the groundwork for autonomous locomotion, but also is safe for human-robot interaction. This was done by ensuring that the actuation principle utilized by the robot is safe around humans and can work in an untethered design. Artificial muscle actuation allowed for these prerequisites …

Data Analysis To Evaluate The Performance Of Breathing Masks Used For Filtering Nano-Level Particles At Manufacturing Sites, Gracia M. Dardano

Honors College Theses

The work performed in this research aims to evaluate the performance of commercially available breathing masks in filtering airborne nanoparticles at manufacturing sites. Nanoparticles are found virtually anywhere, from dust in a worksite to a simple sneeze. Therefore, they pose a substantial threat to human health as their velocity and volatility are high. This research analyzes if current efforts of breathing masks to hinder nanoparticles are effective, especially at manufacturing sites. Data has been collected in order to analyze the behavior of nanoparticles and to measure nanoparticle levels at manufacturing sites and its working environment. Data is statistical in nature …

Study On The Viability Of Preparing Plaster Molds For Rapid Prototyping Of Complex Ceramic Parts Using The Lost Pla Method, Shelton F. Fowler Iv

Honors College Theses

In the field of metal casting, cast parts often require an internal cavity to be made to meet design requirements. Frequently, these interior surfaces are not manufacturable through standard machining processes, and even when possible, they would most likely involve expensive and time-consuming operations. In order to avoid these machining costs, expendable ceramic or sand cores are manufactured and placed into the mold to allow the direct casting of complex internal geometries. This research seeks to use relatively inexpensive plastic 3D printing technology and the lost PLA casting process for the production of low-cost and rapidly producible ceramic cores. A …

Design Of A Methanol Reformer For On-Board Production Of Hydrogen As Fuel For A 3kw High-Temperature Proton Exchange Membrane Fuel Cell Power System, Vladimir Gurau, Adedayo Ogunleke, F. Strickland

Manufacturing Engineering: Faculty Publications (2015-2023)

The method of Computational Fluid Dynamics is used to predict the process parameters and select the optimum operating regime of a methanol reformer for on-board production of hydrogen as fuel for a 3 kW High-Temperature Proton Exchange Membrane Fuel Cell power system. The analysis uses a three reactions kinetics model for methanol steam reforming, water gas shift and methanol decomposition reactions on Cu/ZnO/Al2O3 catalyst. Numerical simulations are performed at single channel level for a range of reformer operating temperatures and values of the molar flow rate of methanol per weight of catalyst at the reformer inlet. Two operating regimes of …