Process Control and Systems Commons^™

Designing A Cylindrical Capacitive Based Sensor For Monitoring The Table Salt’S Moisture Content During Iodization, Mwajuma Lungo

Tanzania Journal of Engineering and Technology (TJET)

Coaxial cylinder capacitive moisture sensor for determination of moisture content of table salts has been fabricated. The CMS method for determination of moisture content of table salts overcomes the effect of evaporation of iodine in table salt which results from heating in the oven drying method. The CMS overcomes the polarization effect result from the resistive methods of moisture content determination and it is non expensive to construct and it has high accuracy since measurements involves programming system in interpretation of the results. In this research, moisture content sensor based on capacitive principal created using two coaxial cylinders with height …

Dynamic Influence Diagram-Based Deep Reinforcement Learning Framework And Application For Decision Support For Operators In Control Rooms, Joseph Mietkiewicz, Ammar N. Abbas, Chidera W. Amazu, Anders L. Madsen, Gabriele Baldissone

Articles

In today’s complex industrial environment, operators are often faced with challenging situations that require quick and accurate decision-making. The human-machine interface (HMI) can display too much information, leading to information overload and potentially compromising the operator’s ability to respond effectively. To address this challenge, decision support models are needed to assist operators in identifying and responding to potential safety incidents. In this paper, we present an experiment to evaluate the effectiveness of a recommendation system in addressing the challenge of information overload. The case study focuses on a formaldehyde production simulator and examines the performance of an improved Human-Machine Interface …

Obtaining Sweet Molasses By The Method Of Hydromechanical And Enzymatic Processing Of Grain, Sadritdin Maxamatdinovich Turabdjanov, Kamoliddin Ahmadjonovich Mahmudov, Bexzod Alisherovich Kasimov, Kasun Dissanayake Kumara

Chemical Technology, Control and Management

Methods of hydrolysis of grains to starch under the influence of hydrodynamic and enzymatic processes are logically based. Polysaccharides derived from starchy grains are known and popular in the food industry for their thickening and stabilizing properties. To date, studies that allow for a deeper understanding of the mechanism of interaction of polysaccharide-containing products with their main components, the effect on the set of rheological, organoleptic, physico-chemical properties of food products that determine their functions are relevant.

Results Of The Study Of The Pumpkin Drying Process, Jasur Esirgapovich Safarov, Shahnoza Abduvakhitovna Sultanova, Andrey Svyatoslavovich Ponasenko, Gani Toshkhujaevich Dadaev

Chemical Technology, Control and Management

The article presents the results of the study of the pumpkin drying process, comparisons with different drying models are carried out. A mathematical model for numerical analysis has been developed. Pumpkin drying rates are calculated and various drying models are investigated. 5 different drying models were used to verify the accuracy of experimental data and search for the most suitable model. The experimental data obtained for the drying air temperature of 45 °C, 55 °C and 65 °C were applied to various drying models.

Use Of Neural Networks In Intelligent Measurement Tools, N.R Yusupbekov, Y.Sh. Avazov, Umidjon Ruziev Phd

Chemical Technology, Control and Management

The paper presents algorithms for processing the measurement signal with the possibilities of adaptation, learning and decision making. A comparative analysis of the methods of intellectual processing of measurement data is carried out. A model of a measuring instrument for determining the structure of a neural network has been developed. The problem of error reduction due to measurement noise filtering with the use of neural networks is considered. The structure of the neural network has been developed for intelligent processing of the measurement signal and ensuring the implementation of the functions of reconfiguration, calibration, self-diagnosis and self-control. A neural network …

Mathematical Model Of An Industrial Robot Built On The Basis Of Linear Motion Mechatron Modules, Matyokubov Nurbek Rustamovich, Rakhimov Temurbek Omonboyevich

Chemical Technology, Control and Management

The use of Industry 4.0 technologies in modern production serves to increase production efficiency. Robots and robotic complexes with innovative intelligent control are widely used in industrial production. However, studying their mechanical part, linear motion mechatronic modules and control system is a complex object. The variety and complexity of control methods and operating modes negatively affects the operator's working time and production productivity. In such cases, it is necessary to improve control methods and develop technologies used in industry, including robots and robotic manipulators, which allow to perform short movements with high accuracy and speed. In the article, the mathematical …

Application Of Evolutionary Algorithms For Optimization Of Operation Modes Of Regional Electric Power Systems, Isamiddin Khakimovich Siddikov, Oksana Vitalevna Porubay

Chemical Technology, Control and Management

The paper presents the possibilities of using evolutionary algorithms to solve the problem of optimizing the operation modes of electric power facilities in the presence of constraints in the form of inequalities and equalities. The limits of constraints have a variable character, depending on the generated and consumed energy. Existing methods used for the optimization of modes are based on general principles and approaches to optimization, which usually adapt to the specifics of the problem. In electric power facilities, optimization problems have some peculiarities, among which is the presence of multiple constraints applied to both independent and dependent variables. Many …

Systematic Analysis Of Methods Of Control Of Dynamic Objects In Conditions Of Non-Measurable Disturbances, Mamirov Farkhodovich Uktam, Buronov Mamurjon Ugli Bunyod

Chemical Technology, Control and Management

The article presents a systematic analysis of control methods of dynamic objects under non-measurable disturbances. It is important to study all the factors affecting the control object in order to increase the efficiency of the control system. Due to the immeasurable nature of disturbances affecting control objects, it is shown that they cause negative effects and increase the complexity of control systems in this case. In the control of dynamic objects of this type, the possibilities of control by indirect measurement of disturbances or by estimation of object position and disturbances have been explored. The use cases, shortcomings and achievements …

Development Of The Computer Model Of The Waste Water Treatment Process Using Ion-Exchange Resins In The Matlab Program, Jaloliddin Abdurazzakovich Eshbobaev, Bakhodir Tajiddinovich Khamidov, Adham Tilovovich Norkobilov, Orifjon Sharipovich Kodirov

Chemical Technology, Control and Management

In this work, a mathematical model of industrial wastewater treatment technology was formed. First, wastewater treatment technologies were analyzed and the technology of ion-exchange resin treatment was selected. A water purification device using ion-exchange resins was made, and tested on the Kungrad soda plant and the results were obtained. According to these results, it was determined that the cleaning coefficient of the device is up to 98-99%. In this article, a mathematical model of a wastewater treatment device using ion-exchange resins was developed using the stoichiometric matrix method. After the mathematical model of the process was found, a graph of …

Algorithms For Synthesis Of Adaptive Control Systems Based On The Neural Network Approach, Jasur Sevinov, Oxunjon Boborayimov, Sh.M. Abdishukurov

Chemical Technology, Control and Management

Here are algorithms for the synthesis of adaptive control systems based on the neural network approach presented. The issues of choice of architectures of neural networks that produce parametric identification of the object regulation. Adaptative neural networks that reproduce the optimal parameters of implemented controllers, methods of forming training samples for their training are considered. The other question of using the theory of artificial neural networks for approximating the functional of the controller's tuning parameters are determined. Structures of synthesized neural networks of parametric identification of objects with self-alignment in an open loop ACS are proposed. Algorithms made it possible …

The Morphology Analysis Of Soil In Remote Sensing Image Processing, Mirzayan Mirzaaxmedovich Kamilov, Mirzaakbar Xakkulmirzayevich Hudayberdiev, Bobomurod Mamitjonovich Tojiboev

Chemical Technology, Control and Management

This article analyzed various techniques used in satellite image processing to analyze soil morphology. Analysis of soil morphology using satellite imagery plays a crucial role in soil science research, Land Management, and environmental monitoring. It provides an economical and efficient means of studying large-scale soil variability, providing information on land sustainable use, resource management and soil conservation decisions.

Computer Training Systems For Training Engineering Personnel For Control Industrial Enterprises, Yusuf Shodiyevich Avazov, Kamola Rustamovna Abdullaeva

Chemical Technology, Control and Management

A principle has been proposed for constructing computer simulators for improving the qualifications of process control operators at industrial enterprises and for training students of higher educational institutions. The capabilities of a computer simulator that can be used as a digital assistant are revealed. Their architecture for building digital simulators is proposed. From the architecture it is clear that the computer simulator consists of two systems. The training process management system and the server of the computerized simulator are combined into a digital simulator. Simulators in this category provide student operators with the opportunity to develop skills in self-control of …

Addition Of Process Control Experiment To Unit Operations Ii Laboratory., Bradley Esselman

Electronic Theses and Dissertations

Process control is an essential aspect of manufacturing, contributing to improved process safety, efficiency, product consistency, and energy optimization. Chemical engineers are often responsible for ensuring the safe, efficient, and cost-effective operation of industrial processes, and process control plays a pivotal role in accomplishing this.

Chemical engineering students at the University of Louisville complete the course, Elements of Process Control, during the second semester of their fourth year. This lecture-based course offers limited hands-on, practical experience. To supplement the lack of hands-on experience in the classroom, a new process control experiment was designed and implemented into the Unit Operations …

Improving Lignin Recovery From Paper Mill And Biorefinery Waste Streams Via Liquid-Phase Splitting, Carter Fitzgerald

All Dissertations

Lignin is an abundant biopolymer with significant promise due to its aromaticity. It has been targeted as a replacement for a number of petroleum-based products including adhesives, coatings, polyurethane foams, activated carbon, and carbon fibers. However, commercially available bulk lignins are too polydisperse, and contain too many residual metals from the pulping process that are detrimental to the properties of the final product.

The Sequential Liquid-lignin Recovery and Purification (SLRP) process was developed by Michael Lake and John Blackburn, in collaboration with Clemson, with the intention of creating a continuous method for recovering lignin from paper-mill black liquors. Thies and …

Product Costing And Pricing In Small And Medium Enterprises In Tanzania, Cosmas F Kindole

Tanzania Journal of Engineering and Technology (TJET)

metalwork small and medium enterprises located in Dar es Salaam with the aim of establishing methods used by SMEs in Tanzania in setting selling prices of their products. The study was necessitated by the apparent discrepancy of prices for similar products from SMEs. The approach used to gather information was mainly through direct interview and the use of questionnaires. Direct observation and literature review were also used to establish the whole costing and pricing practices in metal manufacturing SMEs. The findings of the study established that product selling practices of the surveyed SMEs were based on instinct and appearance of …

Assessments Of The Application Of Earned Value Management System For Construction Project Performance Measurement In Zanzibar, Juma M. Matindana

Tanzania Journal of Engineering and Technology (TJET)

Many construction projects in developing countries including in Zanzibar suffer from time and budget overruns. The Revolution Government of Zanzibar established different bodies such as Zanzibar Contractors Registration Board (ZCRB), Zanzibar Architects, Engineers and Quantity Surveyors Registration Board (ZAEQRB), Zanzibar Public Procurement and Disposal of Public Asset Authority (ZPPDA), among others with the aim of controlling the performance of project. Often scope creep, time and cost overruns are very common problems in construction projects. This study aims at addressing those problems by assessing the use of Earned Value Management (EVM) methodology in measuring construction industry performance in Zanzibar. The study …

Review On Modifications Of Sisal Fibers For Textile Applications, Liberato V Haule

Tanzania Journal of Engineering and Technology (TJET)

Properties of sisal fibers such as high coarseness and poor drapability made the fibers less suitable in production of conventional textiles compared to synthetic fibers. The environmental consciousness and depletion of petrochemical resources have attracted researchers on investigating the use of natural fibers in the industrial production of conventional textiles. Sisal is among highly researched natural fibers due to its features such as strength, recyclability, availability, low processing cost, light weight and ease process ability. This paper reviews possible modifications of sisal fibers to enhance performance in conventional textiles applications

Topological Interpolation Method For Modeling Dynamic Systems, Isamiddin Xakimovich Siddikov, Dilnoza Maxamadjanovna Umurzakova

Chemical Technology, Control and Management

The method of simulation structural-complex continuous-discrete control systems is discussed. For simulation and calculation of dynamic processes in continuous-discrete systems topological interpolation method is proposed, based on application of hybrid methods of space of state variables and interpolation of signals. The essence of the method is that the dynamics of the investigated system, considered at the final interval, is broken down into subintervals, on each of which the processes are described by linear ordinary system differential equations. The computational efficiency of the proposed method was evaluated by comparison with standard methods such as the Runge-Kutta-Merson method. The use of this …

Intellectualization Of The Process Of Monitoring Of Complex Technological Productions, Dmitry Semenovich Karpovich, Umidjon Abdimajitovich Ruziev

Chemical Technology, Control and Management

The article deals with the creation of intelligent monitoring systems for complex technological processes. The methods and models of the intellectualization of information processing systems are analyzed. The advantages of using intelligent measuring instruments in monitoring systems are given, which allow obtaining reliable information necessary for the effective control of complex technological processes. The issues of using intelligent measuring instruments in monitoring systems are considered. A block diagram of intelligent monitoring of signal processing of complex production processes has been proposed. An algorithm for parametric correction of intelligent measuring instruments in monitoring systems has been developed. A model of a …

Modeling And Dynamic Correction Of The Thermal Radiation Fluxes Measuring System, Olexander Alekseevich Sytnik, Fatima Mirazizovna Sagatova

Chemical Technology, Control and Management

Temperature measurements are currently an integral part of modern production, in particular, energy, aviation, instrumentation, etc. Therefore, the need to improve the accuracy of measurement, control and regulation of temperature largely determines the technical and economic efficiency of production. The development of reliable methods for temperature control under various conditions and the creation of specific devices is one of the most important tasks of modern instrumentation. The article deals with the issues of solving the problems of modeling and correcting the dynamic characteristics of a system for measuring thermal radiation fluxes using the integral method of signal recovery. For computer …