Chromatographic Analysis Of The Chemical Composition Of Pyrolysis Distillate, Sh.T. Juraev, B.F. Muxiddinov, U.T. Tailakov

Chemical Technology, Control and Management

The paper presents the results of a study of the physico-chemical characteristics of the liquid fraction of products of thermal oxidative pyrolysis of worn tires. The mass fraction of the volatile gas compounds, the optimal boiling points of the obtained condensates and the flashpoint of pyrolysis liquids, together with the mass composition of cracking products of rubber products at high-temperature pyrolysis at a temperature of 800-900 °C, were determined. Chromatographic analysis allowed us to determine the composition, mainly the mass composition of pyrolysis products, which consisted of carbon (42.8%), higher aliphatic and aromatic hydrocarbons (17.0%), methane (10.2%), benzene (4.2%) and …

Development Of A Mathematical Model Of Magnetic Field Distribution In Magnetic Conductors Of A Wide-Range Current Transformer, Abdurauf Safarov

Chemical Technology, Control and Management

The article is devoted to the analysis of the distribution of the magnetic field in the magnetic conductors of a wide-range current transformer for the development of a mathematical model that can be used as the basis for calculating its static characteristics and error. The design, replacement circuits and design model of a current transformer are given. The relations of magnetic induction and tension from the coordinate of the position of the primary winding are obtained. It is shown that the conversion range can be adjusted depending on the different positions of the bus with current, as a result of …

A Neural Network Model For Monitoring And Forecasting The Process Of Storing Oilseeds, N.A. Kabulov

Chemical Technology, Control and Management

The paper presents the results of research on the control, forecasting and management of the storage process of oilseeds. Vegetable oil production and energy consumption are two important factors of oilseed storage systems. The first ones should meet the needs of the population quantitatively and qualitatively. As a result, in order to properly control these two important aspects, it is necessary to maintain an appropriate microclimatic environment using a computational decision support system (DSS) that is able to adapt to changes in environmental characteristics. The multilayer perceptron neural network (MLP-NN) was developed to simulate the temperature and relative humidity profiles …

Synthesize A Neural Network Parameter Optimizer For An Adaptive Pid Controller, Nashvandova Gulruxsor Murot Qizi

Chemical Technology, Control and Management

Wide application of proportional-integral-differential (PID)-regulator in industry requires constant improvement of methods of its parameters superstructuring. In the paper, the questions of optimization of PID-regulator parameters with application of methods of neural network technology are considered. A methodology for selecting the architecture of neural network optimizer designed to determine the tuned parameters of PID regulator is proposed. The algorithm of training of the neural network, with the set on the basis of the method of inverse gradient propagation is offered. The proposed improved PID-neural regulator allowed to provide stabilization of neural network operation and its trainability in the control loop …

Development Of A Criterion Assessing The Level Of Relationship Of Multiple Identified Characteristics For Classification, Mirzoyan Mirzaaxmedovich Kamilov, Oybek Zokirovich Koraboshev, Bobomurod Mamitjonovich Tojiboev

Chemical Technology, Control and Management

This article discusses an optimized version of the standard design developed by Yu.I.Zhuravlev, an optimization procedure through an algebraic approach based on precedent algorithms that solves the problem of pattern identification. The formation of the convex hull of the recognition operator and corrective procedures of information models by mutual compensation of each other was also studied. In addition, the functional connection of recognition operators and the definition of idempotent connection of operators are analyzed.

Evaluation Of Environmental Management System For Small And Medium Enterprises In Dar Es Salaam, Tanzania, Juma M. Matindana

Tanzania Journal of Engineering and Technology (TJET)

A system that manages environmental issues of Small and Medium Enterprises (SMEs) from the time of acquisition of raw materials up to disposal of the product is not well clear, especially in Tanzania. Most of the studies have been conducted in the field of environment management but few of them address the evaluation of the management of SMEs activities with respect to the environment. Although the nature of activities of SMEs has little noticeable environmental implications at the individual level but the impact is large due to diversification and labour intensity of these SMEs. SMEs employ about 20% of the …

A Two-Stage Based Life Cycle And Principal Component Analysis For Decision Support Of Potential Municipal Solid Wastes Management Scenarios, Case Study Dar Es Salaam, Tanzania, Edwin Richard Ndibalema Dr

Tanzania Journal of Engineering and Technology (TJET)

In most of the urban areas of Tanzania, poor and inadequate solid waste management is a growing environmental and public health concern. Despite an array of solid waste management options, choosing an appropriate one remains a challenge. This study applied a novel two-stage-based approach to assess the environmental impacts and sustainability performance of the 27 scenarios for municipal solid wastes (MSW) management of Dar es Salaam City, Tanzania. In the first stage, the study utilized a life cycle analysis (LCA) to quantify the environmental impacts of MSW scenarios. In the second stage, the study used the principal component analysis (PCA) …

Augmented Finite Control Set Mpc Design Technique For Wide Speed Range Control Of Permanent Magnet Synchronous Motor Drives, Francis Mwasilu

Tanzania Journal of Engineering and Technology (TJET)

The effective motion control task is highly influencing the final drive performance in wide-range motor drives applications such as electric vehicles (EVs), washing machines, compressors, elevators and lathe machines. Recently, permanent magnet synchronous motor (PMSM) drive has been widely employed in these applications to achieve desired performances such as high efficiency, high torque requirements with minimum size “occupancy”. The PMSM drive features combining with these modern drive applications are highly nonlinear and the desired operation requirements demand high-performance control schemes with fast system response and robustness features. Linear control schemes are usually implemented to drive the PMSM that entail trade …

Cost Estimation Proxy Models For Economic Evaluations In Petroleum Projects: A Case Study From The Onshore Gas Field In The Southern Coastal Tanzania Basin, Fulmence Kaborogo

Tanzania Journal of Engineering and Technology (TJET)

Petroleum economic evaluation involves estimating revenues from forecasted production profiles and field costs including capital expenditures (CAPEX), drilling expenses (DRILLEX), and operating expenses (OPEX). The existing cost-estimating tool requires several inputs making it time-intensive and difficult to use with few data during the early stages of projects. Majority of the previously developed time saving cost estimations proxy models rely on unrealistic assumptions that include uniform operational costs for different fields with a different number of wells, casings, and drilled depths. This work focused at developing proxy models that consider the variability of the development costs with different parameters. The developed …

Virtual Test Beds For Image-Based Control Simulations Using Blender, Akkarakaran Francis Leonard, Govanni Gjonaj, Minhazur Rahman, Helen E. Durand

Chemical Engineering and Materials Science Faculty Research Publications

Process systems engineering research often utilizes virtual testbeds consisting of physics- based process models. As machine learning and image processing become more relevant sensing frameworks for control, it becomes important to address how process systems engineers can research the development of control and analysis frameworks that utilize images of physical processes. One method for achieving this is to develop experimental systems; another is to use software that integrates the visualization of systems, as well as modeling of the physics, such as three-dimensional graphics software. The prior work in our group analyzed image-based control for the small-scale example of level in …

Schaeffler Icvd Coating Machine, Louis Mcgrath

Williams Honors College, Honors Research Projects

Chemical Vapor Deposition (CVD) is mutual technology used to deposit thin film through a gaseous phase by vaporizing the solid materials. This conventional process usually requires high thermal stability of the materials, which is not applicable for most of the polymeric materials. Therefore, a novel process, initiated Chemical Vapor Deposition (iCVD) is developed by introducing the gaseous monument and initiator to form the thin film in-situ. By adjusting the free-radical polymerization in the vapor phase, a variety of thin and uniform polymer films can be achieved. Depending on the chemistry, iCVD has many categories. This report explains the design …

Application Of Predictive Control Strategies For Water-Gas Shift Membrane Reactors Using Data-Driven Models, Bernardo De Oliveira Vecchio

Graduate Theses, Dissertations, and Problem Reports (ETD)

As demand for more efficient processes keeps rising and more restrictive environmental legislation requires higher levels of both yield and purity, the process industry has now, more than ever, been looking for new ways to achieve these goals. One approach has been the implementation of Process Intensification (PI). PI aims to combine multiple unit operations into a single one, promoting efficiency gains on multiple levels. This combination, however, leads to complex process dynamics, and controlling such processes, particularly when setup as multi-input-multi-output (MIMO) systems, presents a great challenge due to highly interactive complex process dynamics and the imposition of many …

Development Of Dynamic Mass-Energy-Thermodynamics Constrained Hybrid Neural Network Models For Process Systems Applications, Angan Mukherjee

Graduate Theses, Dissertations, and Problem Reports (ETD)

First-principles models can provide very good predictions even for cases when there are no data at all, or data are limited in certain range of operating conditions, or for cases where data collection is infeasible. However, the development of accurate first-principles models for complex nonlinear dynamic systems can be time consuming, computationally expensive, and may be infeasible for certain systems due to lack of sufficient knowledge (information). It is also challenging to adapt first-principles models for time-varying systems. Furthermore, it can be difficult, if not impossible, to develop accurate models for some complex phenomena that are poorly understood. On the …

Triggered Online System Re-Identification Applied To Model Predictive Control Using Gaussian Processes, Daniel Augusto Kestering

Graduate Theses, Dissertations, and Problem Reports (ETD)

Safety, product quality, enhanced performance, and increased profit all depend on the control of chemical and energy processes. However, operational issues can lead to control challenges, especially when processes are subject to disturbances during their operation. Process control methods work best when processes operate close to their designed operat- ing conditions, but lack of performance or other issues may occur when the process is far from such conditions. To overcome these challenges, in this dissertation, online model re- identification is proposed for Model Predictive Control (MPC). This involves reassessing the predictive model of an advanced controller, namely MPC, when re-identification …

Development Of Dynamic Modeling And Estimation Techniques For Condition Monitoring Of Advanced Energy Systems, Vivek Saini

Graduate Theses, Dissertations, and Problem Reports (ETD)

The integration of renewable energy sources into the electric grid requires the current fleet of fossil-fired power plants to operate more flexibly, leading to frequent load changes that stress critical high temperature boiler components that were primarily designed for base load operations. The more complex operating scenarios can modify component damage, compromising reliability and increasing operational costs. To ensure efficient plant operations, adaptive condition monitoring tools generalizable for different plant configurations are essential for recognizing the impacts of load-following, improving safety, and preventing outages. This dissertation work is primarily focused on the development of advanced modeling and estimation techniques frameworks …

Modeling, Control, And Fault Detection Of Energy Systems Under Limited High-Confidence Data Scenarios, Selorme K. Agbleze

Graduate Theses, Dissertations, and Problem Reports (ETD)

Abstract

Modeling, Control, and Fault Detection of Energy Systems under Limited High-Confidence Data Scenarios

Selorme K. Agbleze

Utilizing process measurements for fault detection is an established approach for processes with adequate datasets. For systems with limited high-confidence data representing fault cases and some amount of low-confidence data, few quantitative hybrid techniques exist for performing fault detection. In real systems, it is time-consuming, expensive, and sometimes not productive to generate enough high-confidence data with fault characteristics of a specific process. The problem of limited high-confidence data scenarios may also arise due to process novelty, the need for new operating conditions, or …

Strategies For Process Systems Mapping And Control Based On Operability Analysis, Victor Manuel Cunha Alves

Graduate Theses, Dissertations, and Problem Reports (ETD)

This dissertation aims to develop strategies for process systems engineering (PSE) mapping using models, emerging tools and algorithms motivated by process operability analysis research. Such strategies will be employed to ensure simultaneous design and control of large-scale industrial systems. The emerging tools and techniques in this research include supervised machine learning-based (ML-based) operability mapping, automatic differentiation (AD) for implicit mapping, and the development of a systematic mapping approach for control structure selection using operability analysis. Thus far, the developed operability algorithms either recur to nonlinear programming (NLP) solutions which are computationally expensive or to linearizing the underlying modeling task at …

State Estimation And Economic Analysis For Electrochemical Sensor-Based Corrosion Monitoring, Chandra Sekhar Somayajula

Graduate Theses, Dissertations, and Problem Reports (ETD)

Coal is currently the third-largest source of electricity production in the U.S. However, renewables are projected to be the primary source of electricity production in the future. Though coal-fired power plants (CFPPs) are rapidly retiring in the U.S., many CFPPs worldwide are expected to stay operational for a while due to factors like easy and cheap access to comparatively inexpensive coal. Therefore, non-renewable sources like coal are still expected to be prevalent and be used to ensure the stability of the electric grid in the foreseeable future. The existing coal-fired power plants generally designed to operate at base-loaded conditions are …

Reducing Food Scarcity: The Benefits Of Urban Farming, S.A. Claudell, Emilio Mejia

Journal of Nonprofit Innovation

Urban farming can enhance the lives of communities and help reduce food scarcity. This paper presents a conceptual prototype of an efficient urban farming community that can be scaled for a single apartment building or an entire community across all global geoeconomics regions, including densely populated cities and rural, developing towns and communities. When deployed in coordination with smart crop choices, local farm support, and efficient transportation then the result isn’t just sustainability, but also increasing fresh produce accessibility, optimizing nutritional value, eliminating the use of ‘forever chemicals’, reducing transportation costs, and fostering global environmental benefits.

Imagine Doris, who is …

Algorithms For Synthesis Of Adaptive Control Systems With A Customized Model Using The Speed Gradient Method, Jasur Sevinov, Oxunjon Boborayimov

Chemical Technology, Control and Management

Algorithms are considered for the synthesis of adaptive control systems with a customized model based on the speed gradient method. For the synthesis of adaptive control systems, the identification approach is based on obtaining estimates of the unknown parameters in the object. By calculating the speed gradient, identification algorithms with an explicit and implicit customized model were obtained as well as that in sliding modes. A joint solution is given to the interrelated problems of identifying parameters with insufficient current information. The position of an object is about assessing the state with insufficient a priori information about its parameters. This …