Petroleum Engineering Commons^™

A Simplified Method For Experimentally Quantifying Crude Oil Swelling During Immiscible Carbon Dioxide Injection, Sherif Fakher, Abdulmohsin Imqam

Geosciences and Geological and Petroleum Engineering Faculty Research & Creative Works

Immiscible carbon dioxide (CO₂) injection is one of the highly applied enhanced oil recovery (EOR) methods due to its high oil recovery potential and its ability to store CO₂ in the reservoir. The main mechanism of immiscible CO₂ injection is oil swelling. Generally, oil swelling is measured experimentally or measured using modeling methods. This research conducts oil swelling experiments using a simplified method in order to easily and accurately measure oil swelling and determines some of the most significant factors that may impact oil swelling during CO₂ injection. The impact of varying CO₂ injection …

Anti-Collision Planning Optimization In Directional Wells, Abdulrahman Mohamed

Petroleum Engineering and Gas

One of the most application of the directional drilling is drilling multiple wells from one location or platform. In drilling multiple wells from one location the major problem that faced is avoiding the collision with the offset wells that drilled near the proposed well in the same region. Therefore, the potential of collison between the wells can cause severe catastrophic accidents such as an explosion or oil spill. Several measurements of proximity calculation or methods have been adopted to control the distance between the wells, avoid the collison, increasing the clearance along with smoothing the trajectory, Reducing the drilling time …

A Scoring Model To Evaluate Offshore Oil Projects: Case Of Eni And Mellitah Oil & Gas, Abdulhakim Giadedi

Dissertations and Theses

Offshore oil projects have many different and unique characteristics, such as larger project size, higher number of scopes, and higher complexity. In fact, offshore oil projects described as mega projects are ones that require significant assessment and acquisition methods in order to reduce risks and failures. Traditionally, cash flow analysis and return on investment are the most known factors to evaluate offshore oil projects. However, there are several other internal and external factors that affect the overall performance of offshore oil projects. A comprehensive approach and advanced tools are required to evaluate these factors that can have a significant impact …

Membrane-Based Removal Of Ammonia From A Waste Stream And Its Recovery, Philip A. Aligwe

Dissertations

At neutral pH levels, ammonia in aqueous streams exists in two forms: ammonium ion (NH₄⁺) and dissolved ammonia gas molecules (NH₃). Membrane separation serves as a viable option for treatment of ammonia containing effluents. This can be achieved via by stripping NH₃ from an ammonia feed solution at feed solution pH > 11 via hollow fiber supported gas membrane (SGM) or removing NH₄⁺ from an ammonia feed solution at feed solution pH < 7 via liquid or polymeric membranes.

The first study reported here examines the influence of feed volumetric flow rates on outlet NH₃ concentrations in parallel flow …

A Comparison Study Using Particle Swarm Optimization Inversion Algorithm For Gravity Anomaly Interpretation Due To A 2d Vertical Fault Structure, Neil Lennart Anderson, Khalid S. Essa, Mahmoud Elhussein

Geosciences and Geological and Petroleum Engineering Faculty Research & Creative Works

A new approach to the inversion of gravity data utilizing the Particle Swarm Optimization (PSO) algorithm is used to model 2D vertical faults. The PSO algorithm is stochastic in nature; its development was motivated by the communal in-flight performance of birds looking for food. The birds are represented by particles (or models). Individual particles have a location and a velocity vector. The location vectors represent the parameter value. PSO is adjusted with random particles (models) and searches for targets by updating generations. Herein, the PSO algorithm is applied to three synthetic data sets (residual only with and without noise, residual …

Pressure Monitoring For Subsurface Leakage Characterization, Mojtaba Mosaheb

LSU Doctoral Dissertations

Undesirable leakage from underground sedimentary formations is a matter of considerable concern due to implications for water resources contamination and greenhouse gas emissions. Leakage in underground formations can remain undetected for a long period. Pressure monitoring is a dynamic method that can be used for leakage detection and characterization. The pressure signals are affected by the hydraulic characteristics of the reservoir media and leakage pathways. Consequently, the pressure data can be interpreted to obtain information about the hydraulic characteristics of the system. Pressure interpretation is useful for early leakage detection, because the pressure signals travel fast in reservoir media. In …

Developing A New Formula For Predicting Oil Recovery Factor In Water Flooded-Heterogeneous Reservoirs, Mohamed Khaled Aljifri

Theses

In this work, two sets of empirical correlations were developed for predicting the recovery factor (RF) in water-flooded layered oil reservoirs. The first set of these correlations encompasses four key parameters believed to have a significant impact on waterflooding performance, namely, reservoir heterogeneity (permeability variation coefficient), injected water viscosity, permeability anisotropy (ratio of vertical permeability to horizontal permeability), and water injection rate. This first set consists of two expanded forms, one for predicting the RF at water breakthrough time (BT) and the other for predicting the RF at the end of the project (EOP). Out of the aforementioned four key …

Data-Driven Modeling And Prediction For Reservoir Characterization And Simulation Using Seismic And Petrophysical Data Analyses, Xu Zhou

LSU Doctoral Dissertations

This study explores the application of data-driven modeling and prediction in reservoir characterization and simulation using seismic and petrophysical data analyses. Different aspects of the application of data-driven modeling methods are studied, which include rock facies classification, seismic attribute analyses, petrophysical properties prediction, seismic facies segmentation, and reservoir dimension reduction.

The application of using petrophysical well logs to predict rock facies is explored using different data analytics methods including decision tree, random forest, support vector machine and neural network. Different models are trained from a set of well logs and pre-interpreted rock facies data. Among the compared methods, the random …

Flow Of Carbon Dioxide In Micro And Nano Pores And Its Interaction With Crude Oil To Induce Asphaltene Instability, Sherif Fakher, Abdulmohsin Imqam

Geosciences and Geological and Petroleum Engineering Faculty Research & Creative Works

This study presents an investigation of the flow mechanism of carbon dioxide (CO₂) through nano and micro pores and the impact of this flow on oil mobilization and asphaltene instability in the crude oil. The flow mechanism of CO₂ is determined using numerical modeling through the Knudsen number to determine the flow regimes under different thermodynamic conditions. Following this, the oil production and asphaltene stability are studied using a filtration vessel supplemented with nano and micron sized filter membranes. The effect of varying CO₂ injection pressure, oil viscosity, porous media pore size, and porous media thickness …

An Experimental Investigation Of Asphaltene Stability In Heavy Crude Oil During Carbon Dioxide Injection, Sherif Fakher, Mohamed Ahdaya, Mukhtar Elturki, Abdulmohsin Imqam

Geosciences and Geological and Petroleum Engineering Faculty Research & Creative Works

Carbon dioxide (CO₂) injection is one of the most applied enhanced oil recovery methods in the hydrocarbon industry, since it has the potential to increase oil recovery significantly and can help reduce greenhouse gases through carbon storage in hydrocarbon reservoirs. Carbon dioxide injection has a severe drawback, however, since it induces asphaltene precipitation by disrupting the asphaltene stability in crude oil that bears even the slightest asphaltene concentration. This can result in severe operational problems, such as reservoir pore plugging and wellbore plugging. This research investigates some of the main factors that impact asphaltene stability in crude oil …

Stress-State And Injection-Rate Dependent Damage Processes During The Hydraulic Fracturing Of Granite, Gayani Sasendrika Gunarathna

Dissertations

Hydraulic fracturing is a well-stimulation technique that is employed in field applications, such as enhanced geothermal systems (EGS) and shale oil/gas extraction. This research experimentally investigates the effect of the state of stress and injection rate on the hydraulic fracturing processes. In addition, a displacement discontinuity method (DDM) code, FROCK, is used to model the crack initiation and propagation in a granite specimen under hydraulic fracturing conditions. In order to conduct the experimental work, a test setup capable of applying a triaxial state of stress and water pressure inside pre-fabricated flaws cut in prismatic granite specimens is developed. Additionally, the …

Upgrading Cracking Waste To Rubber Precursors Via Oxidative Dehydrogenation, Andrew Mason, Delaney Franck, Firdvas Nasimov, Lindsey Jarema, Gitau Wambugu

Department of Chemical and Biomolecular Engineering: Funded Proposals

To: Dr. Yasar Demirel, Professor, University of Nebraska-Lincoln

As the result of process changes within an ethylene cracking plant, the amount of a C4 byproduct waste stream has significantly increased (Fabiano, Nedwick 1999). A system of extractive distillation and catalytic oxidative dehydrogenation can be used to add value to this C4 waste stream by producing high purity 1,3-Butadiene, an important rubber precursor. 1,3-Butadiene is a critical component of multiple consumer goods, including automobile tires and synthetic rubber and has a steadily increasing demand, reaching 10 million metric tons in 2012 (Biddy, Scarlata, Kinchin, 2016). The simulation assumes a feed flow …

Modeling Unconventional Water Production In The Northeast Elm Coulee Field, Bakken Formation, Jan Branning

Graduate Theses & Non-Theses

Wells within the Northeast (NE) Elm Coulee produce significantly higher water cuts than wells within Elm Coulee Proper. The purpose of this work was to identify the source of produced water in the NE Elm Coulee. An area within the NE Elm Coulee was selected for a numerical flow simulation analysis, and a total of three models of the project area were constructed by isolating production mechanisms to determine the source of produced water in the NE Elm Coulee. A Separate Tank model was constructed to determine if the source of the produced water was matrix water saturation in the …

Production Of Renewable Hydrocarbon Fuel Via Titanium Oxide-Alumina (Tio2-Al2o3) Catalytic Deoxygenation Reaction, Xian Yih Ooi

Student Works (2020-2029)

The renewable hydrocarbon-like biofuel from biomass is crucial to substitute fossil fuel. Catalytic deoxygenation is a biofuel upgrading process to eliminate the high oxygen content in biofuel which will lead to corrosion, instability and lower heating value problems. The choice of support is significant to provide the maximum acid strength for the hydrogenolysis of C-O bonds. Al2O3 supported catalyst has drawn attention due to the high acidity. However, the high acidity leads to coke deposition, unstable and deactivation of the catalyst. Thus, it is important to develop methods to improve catalyst performance, reduce catalyst coking and enhance catalyst lifetime. Recently, …

Investigation Of Tracer-Surfactant-Foam Processes In Shallow Subsurface Environmental Remediation: History-Matching And Performance Prediction, Hazem Fleifel

LSU Master's Theses

In-situ subsurface remediation has been widely used as an efficient means of cleaning up non-aqueous phase liquid (NAPL) from contaminated soils and aquifer. The use of tracer, surfactant, and foam are often considered to keep track of the propagation of injected fluids in the medium, dissolve and mobilize contaminants trapped by capillary forces, and overcome the level of heterogeneity and improve displacement and sweep efficiencies.

This study shows an actual remediation process to reduce NAPL within a military base in South Korea, by injecting tracer and surfactant solutions together for a duration of 10 days. The site consists of 5 …

Microfluidic Study Of The Electrocoalescence Of Aqueous Droplets In Crude Oil, Thomas Leary, Mohsen Yeganeh, Charles Maldarelli

Publications and Research

In electrocoalescence, an electric field is applied to a dispersion of conducting water droplets in a poorly conducting oil to force the droplets to merge in the direction of the field. Electrocoalescence is used in petroleum refining to separate water from crude oil and in droplet-based microfluidics to combine droplets of water in oil and to break emulsions. Using a microfluidic design to generate a two-dimensional (2D) emulsion, we demonstrate that electrocoalescence in an opaque crude oil can be visualized with optical microscopy and studied on an individual droplet basis in a chamber whose height is small enough to make …

Re-Crosslinking Particle Gel For Co₂ Conformance Control And Co₂ Leakage Blocking, Yifu Long, Baojun Bai, Thomas P. Schuman

Geosciences and Geological and Petroleum Engineering Faculty Research & Creative Works

The present invention generally relates to the composition of particle gels for CO₂-EOR and CO₂ storage. More particularly, CO₂ resistant particle gels are provided that can re-crosslink at subterranean conditions. These particle gels can be deployed to improve the conformance of CO₂ flooding, CO₂ huff-puff, or Water-Alternative-Gas (WAG). The applications may also involve CO₂ storage, such as the blocking of CO₂ leakage and similar CO₂ processing.

Critical Review Of Asphaltene Properties And Factors Impacting Its Stability In Crude Oil, Sherif Fakher, Mohamed Ahdaya, Mukhtar Elturki, Abdulmohsin Imqam

Geosciences and Geological and Petroleum Engineering Faculty Research & Creative Works

Asphaltene is a component of crude oil that has been reported to cause severe problems during production and transportation of the oil from the reservoir. It is a solid component of the oil that has different structures and molecular makeup which makes it one of the most complex components of the oil. This research provides a detailed review of asphaltene properties, characteristics, and previous studies to construct a guideline to asphaltene and its impact on oil recovery. The research begins with an explanation of the main components of crude oil and their relation to asphaltene. The method by which asphaltene …

Insights Into The Applications Of Waste Materials In The Oil And Gas Industry: State Of The Art Review, Availability, Cost Analysis, And Classification, Abo Taleb T. Al-Hameedi, Husam H. Alkinani, Hussein W. Albazzaz, Shari Dunn-Norman, Mohammed M. Alkhamis

Geosciences and Geological and Petroleum Engineering Faculty Research & Creative Works

This study investigates different types of waste materials and their applicability in the oil and gas industry as well as analyzing various applications of these waste materials in the petroleum industry. This study also explores the availability of these waste materials by performing a statistical analysis in a good number of countries worldwide. The statistical study was performed starting with a study on which countries generate waste the most overall, followed by examining multiple countries and investigating their top three most available waste. The results showed that the USA is the leading country in terms of municipal solid waste generation …

A Data Analysis Of Immiscible Carbon Dioxide Injection Applications For Enhanced Oil Recovery Based On An Updated Database, Sherif Fakher, Abdulmohsin Imqam

Geosciences and Geological and Petroleum Engineering Faculty Research & Creative Works

Carbon dioxide (CO₂) injection is an enhanced oil recovery technique used worldwide to increase oil recovery from hydrocarbon reservoirs. Immiscible CO₂ injection involves injecting the CO₂ into the reservoir at a pressure below which it will become miscible in the oil. Even though immiscible CO₂ injection has been applied extensively, very little research has been conducted to provide a comprehensive understanding of the mechanism and the applications of immiscible CO₂ injection. This research performs an in-depth data analysis is performed based on more than 200 experiments and 20 field tests from more than 40 …