Aerospace Engineering Commons^™

Analysis Of Wingtip Vortex Structure Generated By Bio-Inspired Winglets, D'Zahn A. Smith

Doctoral Dissertations and Master's Theses

Bio-inspired winglets were studied with the goal of better understanding the structure of the wingtip vortices they generate. Measurements of the tip vortex were previously carried out using stereoscopic particle image velocimetry (sPIV). The bio-inspired winglet was tested on a rectangular NACA 0012 wing section at a 5-degree angle of attack and at a chord Reynolds number of 900,000. Velocity field measurements were recorded at 0.7 and 2 chord lengths aft of the wing’s trailing edge. Compared to the wing with no attachment and a traditional blended winglet, the bio-inspired winglet’s vortex exhibited significantly less intense flow field properties. These …

Oxider To Fuel Ratio Shift Compensation Via Vortex Strength Control In Hybrid Rocket Motors, Max W. Francom

All Graduate Theses and Dissertations, Fall 2023 to Present

Hybrid motors have existed as a hypothetical propulsion system for decades in a wide range of upper stage rocket motors due to their simple, robust, non-toxic, and versatile nature. However, inherent to hybrids is Oxidizer to Fuel ratio (O/F) shift over time, which results in performance losses for the majority of the rocket’s lifetime. The purpose of this study is to develop a hybrid rocket motor capable of manipulating O/F at will, resulting in an engine which eliminates the undesirable effects of O/F shift. By developing and refining a numerical simulation, a novel injector system, and an open-loop control scheme, …

Development, Modeling, Identification, And Control Of Tilt-Rotor Evtol Aircraft, Clayton T. Spencer

All Graduate Theses and Dissertations, Fall 2023 to Present

This thesis includes the development, modeling, identification, and control of an electric-Vertical-Take-Off-and-Landing (eVTOL) aircraft with tiltable rotors. The front two rotors have tilting capability for transition flight from vertical-take-off to forward-level flight. This work details the development of an eVTOL aircraft and the selection of sub components such as electric motors, batteries, and controllers. After the aircraft build, mathematical model is derived to describe the motion of the aircraft. Unknown parameters in the mathematical model are identified using a Least-Squares-regression (LSR) method that can handle parameter constraints. This is done using real flight data collected from the aircraft. Lastly, this …

Modeling Of Rotor Wake Vortex Dynamics And Interactions In Non-Homogenous Vertiport Environments, Garrison P. Shaw

Doctoral Dissertations and Master's Theses

The current research serves to analyze and study the effects ground forces can have on the thrust performance of a propeller in multiple different configurations. The current research utilizes an open source Computational Fluid Dynamics (CFD) software known as OpenFOAM to generate calculate and visualize these runs. The model used for this experiment is a hybrid model that employs both a Unsteady Reynolds-Averaged Navier-Stokes (URANS) and a detached eddy simulation using a hybrid Large Eddy Simulation (LES) via a KomegaSSTDDES model. This model serves to save computational time as well as allow for accurate results. The three cases run are …

Characterization And Analysis Of Supersonic Flow Through De Laval Nozzles At Varied Design Conditions, Sarah Baird

Doctoral Dissertations and Master's Theses

A combined numerical and experimental investigation of supersonic planar nozzles under different design conditions has been conducted. Supersonic planar nozzles are common geometries observed in supersonic wind tunnels and aircraft or rocket engines. For the important role they play in wind tunnel testing and aircraft propulsion, it is important to conduct a thorough numerical and experimental study to characterize their performance at different operating conditions. In this study, a de Laval nozzle was scanned to extract its contours and subsequently modeled to compare analytical and numerical performance expectations under design and off-design conditions. The nozzle was then installed in a …

Using Convolutional Neural Networks For Autonomous Drone Navigation, Joshua Jowers

Industrial Engineering Undergraduate Honors Theses

Unmanned Aerial Vehicles (UAVs), more commonly known as drones, serve various purposes, notably in military applications. Consequently, there arises a need for navigation methods impervious to intercepted signals [1]. Previous research has explored numerous solutions, including machine learning. This paper delves into a specific machine learning approach employing a Convolutional Neural Network (CNN) to discern image locations [2]. It elucidates the conversion of a CNN model between two machine learning libraries and presents results from multiple experiments examining parameters and factors influencing the approach's efficacy. These experiments encompass testing different data sources, image quantities, and processing pipelines to gauge their …

Cosmic Object Space Management Operations System (C.O.S.M.O.S.), Riah Ivy, Tyler Bumpus, Gabriel Soter

Senior Design Project For Engineers

In the expansive realm of outer space, humanity has ventured into new territories, yet this progress is accompanied by challenges. Among the most significant challenges confronting space exploration today is the growing amount of space debris within low earth orbit. Satellites, spent rocket stages, and assorted fragments orbiting Earth present a considerable hazard to spacecraft and astronauts, and this issue is steadily worsening. For years, the task of remedying this orbital congestion has remained formidable and unresolved. This design provides a novel and innovative solution to this growing problem.

Rasc-Al Large Scale Lunar Crater Prospector, Austin Arnold, Coleman Alvarez, Mark Suberu

Senior Design Project For Engineers

The purpose of this project is to design a conceptual layout of a lunar rover capable of exploring craters at the lunar south pole. The rover should be autonomous and capable of self-sustainment for at least one year in extreme cold and darkness. While determining the location and accessibility of water ice and other volatiles within the crater. This document will contain all information related to the team's conceptual design. Including research, component selection, electrical design, and mechanical design.

Lunar Rascals Video: https://www.youtube.com/watch?v=MdcjzVMtzaI

Rapid Response Satellite Launcher, Nathan Jones, Joey Cosentino, Jayson Layton, Afek Adar

Senior Design Project For Engineers

Air launch to orbit is a new style or spacecraft where rockets are attached to a large aircraft and released at cruising altitude to then ignite and launch into space. Companies such as Virgin Orbit are using it as a cheap and efficient way to move satellite payloads into lower or upper Earth orbit. These styles of launchers can be designed to be much smaller than ground-launched spacecraft, reducing cost and weight of the launcher in comparison. With many private companies coming into the space and satellite industry, the design and manufacturing of these launchers have become a focus within …

Development And Testing Of An 8-Bit Digitally Throttled Hybrid Rocket Motor, Trevor W. Coombs

All Graduate Theses and Dissertations, Fall 2023 to Present

Hybrid rocket motors that use a solid fuel grain and liquid oxidizer are low-cost and safer alternatives to traditional rocket motors. Another benefit of hybrid rocket motors is that during a burn, the amount of oxidizer into the combustion chamber can be changed, this capability is called throttling. To take advantage of the throttling ability of hybrid rocket motors, a throttling valve made up of 8 individually controlled valves is designed, developed, and tested, which is documented in this thesis. The results of the testing campaign show that the 8-bit digital throttling valve technology is an effective throttling technology and …

A Comprehensive Investigation Of The Influence Of Geometric Structure On The Shape Memory Performance Of Nafion, Jade Thomas

Physics Undergraduate Honors Theses

While perfluorosulfonic acid (PFSA) membranes have primarily been used in fuel cells due to their chemical, thermal, and mechanical stability, one PFSA, Nafion, boasts two unique characteristics: a broad glass transition (~55 °C to 130 °C) and a temperature-persistent electrostatic network. The combination of these two characteristics endows Nafion with exceptional shape memory properties – the ability of a material to morph and transform into pre-programmed shapes when exposed to an external stimulus – with enhanced permanent shape memorization, and a potentially near-infinite number of temporary shape memorization. This study focused on expanding the base of knowledge surrounding Nafion’s shape …

A Comprehensive Investigation Of The Influence Of Geometric Structure On The Shape Memory Performance Of Nafion, Jade Thomas

Mechanical Engineering Undergraduate Honors Theses

While perfluorosulfonic acid (PFSA) membranes have primarily been used in fuel cells due to their chemical, thermal, and mechanical stability, one PFSA, Nafion, boasts two unique characteristics: a broad glass transition (~55 °C to 130 °C) and a temperature-persistent electrostatic network. The combination of these two characteristics endows Nafion with exceptional shape memory properties – the ability of a material to morph and transform into pre-programmed shapes when exposed to an external stimulus – with enhanced permanent shape memorization, and a potentially near-infinite number of temporary shape memorization. This study focused on expanding the base of knowledge surrounding Nafion’s shape …

A Study Of Varying Dielectric Constant And Thickness Of Dielectric Barrier Discharge Devices And Their Subsequent Plasma Actuation, Sharon Kardasz

Mechanical Engineering Undergraduate Honors Theses

The principles of air-breathing ion propulsion are relatively unestablished in the aerodynamic realm as traditional forms of combustion for propulsion systems have remained in use. However, due to increasing environmental, economic, and efficiency concerns of traditional combustion, interests in innovative propulsion methodologies, such as electric propulsion, are emerging. A primary technology of interest for use of ion propulsion is the Dielectric Barrier Discharge Device (DBD). Preliminary research conducted at the University of Arkansas has determined the most favorable DBD geometry. This work will continue the preliminary research to decipher the most favorable DBD configuration by varying dielectric thickness and dielectric …

Machine Learning-Based Gps Jamming And Spoofing Detection, Alberto Squatrito

Doctoral Dissertations and Master's Theses

The increasing reliance on Global Positioning System (GPS) technology across various sectors has exposed vulnerabilities to malicious attacks, particularly GPS jamming and spoofing. This thesis presents an analysis into detection and mitigation strategies for enhancing the resilience of GPS receivers against jamming and spoofing attacks. The research entails the development of a simulated GPS signal and a receiver model to accurately decode and extract information from simulated GPS signals. The study implements the generation of jammed and spoofed signals to emulate potential threats faced by GPS receivers in practical settings. The core innovation lies in the integration of machine learning …

Aerodynamic Design And Analysis Of A Modified 2006 Mazda Miata, William N. Recher

Honors College Theses

Aerodynamic forces developed by automobiles have destabilizing effects at high speed. These forces tend to skew toward a vehicle’s rear which can present safety concerns, especially for rear-wheel-drive automobiles like the Mazda Miata. To address oversteer and high-speed instability, a vehicle’s design can be tailored to bring about aerodynamic balance and improve traction. LiDAR was used to bring the physical automobile into the digital space. Then, a splitter and diffuser were added to reduce the magnitude of the destabilizing forces. Next, the size and shape of the rear-wing required to balance the vehicle was calculated using a combination of parameters …

Martian Atmospheric Rover Simulation (M.A.R.S.), Matt Berard, Shelby Beddard, Alexander Brunette, Emma Conti, Collin Duke, Delaney Novak, Keelin Weaver

Aerospace, Physics, and Space Science Student Publications

While rovers have been used by various agencies to explore Mars, their travel is limited by terrain obstacles, which may prevent mission completion. Creating a vehicle equipped with both driving and flight capabilities would allow greater range of motion on extraterrestrial planets. Integrating the technology for both transportation modes into one rover allows for efficiency and advancements in technological and planetary research.

Predictive Ai Applications For Sar Cases In The Us Coast Guard, Joshua Nelson

Cybersecurity Undergraduate Research Showcase

This paper explores the potential integration of predictive analytics AI into the United States Coast Guard's (USCG) Search and Rescue Optimal Planning System (SAROPS) for deep sea and nearshore search and rescue (SAR) operations. It begins by elucidating the concept of predictive analytics AI and its relevance in military applications, particularly in enhancing SAR procedures. The current state of SAROPS and its challenges, including complexity and accuracy issues, are outlined. By integrating predictive analytics AI into SAROPS, the paper argues for streamlined operations, reduced training burdens, and improved accuracy in locating drowning personnel. Drawing on insights from military AI applications …

Successful Rocket Launch In Argonia, Seungyou Cho

SACAD: John Heinrichs Scholarly and Creative Activity Days

The object of launching the PK-56 (The name of the kit) rocket is how to take off and land safely using the parachute deployment. To inspect the engineering process, I tried to get an L1 certification from Tripoli Rocketry Association who is judging whether the rocket was flying stable. This consisted of building the structure, deployment system, engine system, anddesigning process. The most important thing was to read the instructions thoroughly, and to build a safe rocket.

Since launching high-power rockets needs a comprehensive understanding of those processes, I tested with small rocket with a motor that impulses 1.26 N …

Theory Of Development And Improvement Of The Mathematical Model Of The Methodology Of Public Control In The Management Of Occupational Safety And Industrial Risks, Aliakbar Khamidullaevich Rasulev, Sunnatilla Suleymanovich Suleymanov, Nodira Bakhadirzhanovna Gaibnazarova

Technical science and innovation

The article develops and analyzes a mathematical model based on a logical flowchart of the methodology of public control in the management of occupational safety and industrial risks and probability theory, according to the model, the results of compliance with the requirements of social cooperation on occupational safety lead to a sharp increase in the probability of reliability, management efficiency becomes higher. Analysis of the mathematical model of the developed logical flowchart based on probability theory has shown that when the parties cooperate to monitor the results of compliance with labor protection requirements, they lead to a sharp increase in …

Solving Water Resources Problems - Water Saving In The Republic Of Uzbekistan, Rustam Muxammatdjanovich Raximov

Technical science and innovation

In this article we will talk about the problems of water resources in the Republic of Uzbekistan. The problem of drinking water supply, solutions to provide drinking water to the population of Uzbekistan. The largest consumers of fresh water in Uzbekistan are farmers. Due to outdated infrastructure, 40% of water is wasted. Rising food prices and the risk of spreading disease are the first signs of water shortages that we may experience in the coming еars. Uzbekcosmos told how to solve the problem. Water is an invaluable resource used not only in the home, but also in the production and …