Engineering Physics Commons^™

Commissioning Results Of Third C75 Cryomodule For Cebaf, I. H. Senevirathne, G. Ciovati, G. Cheng, M. Mccaughan, M. Weaks, M. Drury

Physics Faculty Publications

The program to upgrade CEBAF cryomodules has been implemented to enhance the energy gain of refurbished cryomodules up to 75 MeV. This strategy in-volves reusing the waveguide end-groups from original CEBAF cavities produced in the 1990s, and existing five elliptical cell cavities are replaced with a new optimized cell shape cavity constructed from large-grain, ingot Nb material. Following fabrication, each cavity undergoes centrifugal barrel polishing and electropolishing and is tested at 2.07 K. Eight cavities are then assembled into "cavity pairs" and tested at 2.07 K before integration into the cryomodule. This paper presents the outcomes of the cavity qualification …

Operation Of A Longitudinally Polarized Solid Nuclear Target Of Clas12, P. Pandey, J. Brock, T. Kageya, C. Keith, S. Kuhn, V. Lagerquist, J. Maxwell, X. Wei

Physics Faculty Publications

A suite of experiments measuring spin observables in electron-nucleon scattering (dubbed Run Group C) was recently executed in Jefferson Lab. These experiments involved the scattering of a polarized 11 GeV electron beam from longitudinally polarized nucleon targets located within the CLAS12 spectrometer in Hall B. The dynamically polarized target used in these experiments was designed and constructed exclusively for operation inside CLAS12 and further optimized for the requirements of Run Group C. We report on the complete target setup, operational experience with the target, the benchmarks achieved using various polarizable and unpolarized materials as well as the preliminary target polarization …

Dual-Energy Electron Storage Ring, B. Dhital, Y. S. Derbenev, A. Hutton, H. Zhang, G. A. Krafft, Y. Zhang, F. Lin, V. S. Morozov

Physics Faculty Publications

A dual-energy electron storage ring is a novel concept initially proposed to cool hadron beams at high energies. The design consists of two closed rings operating at significantly different energies: the low-energy ring and the high-energy ring. These two rings are connected by an energy recovery linac (ERL) that provides the necessary energy difference. The ERL features superconducting radio-frequency (SRF) cavities that first accelerate the beam from the low energy E_L to the high energy E_H and then decelerate the beam from E_H to E_L in the next pass. The different SRF cavities in the ERL …

Event Generators For High-Energy Physics Experiments, J. M. Campbell, M. Diefenthaler, T. J. Hobbs, S. Höche, J. Isaacson, F. Kling, S. Mrenna, J. Reuter, S. Alioli, J. R. Andersen, C. Andreaopoulos, A. M. Ankowski, E.C. Aschenauer, A. Ashkenazi, M. D. Baker, J. L. Barrow, M. Van Beekveld, G. Beswick, S. Bhattacharya, K. Zapp, Et Al.

Physics Faculty Publications

We provide an overview of the status of Monte-Carlo event generators for high-energy particle physics. Guided by the experimental needs and requirements, we highlight areas of active development, and opportunities for future improvements. Particular emphasis is given to physics models and algorithms that are employed across a variety of experiments. These common themes in event generator development lead to a more comprehensive understanding of physics at the highest energies and intensities, and allow models to be tested against a wealth of data that have been accumulated over the past decades. A cohesive approach to event generator development will allow these …

Weak-Strong Beam-Beam Simulation With Crab Cavity Noises For The Hadron Storage Ring Of The Electron-Ion Collider, Y. Luo, B. Gamage, C. Montag, D. Marx, D. Xu, F. Willeke, H. Huang, H. Lovelace Iii, J. Berg, M. Blaskiewicz, S. Peggs, T. Satogata, V. Ptitsyn, V. Morozov, Y. Hao

Mathematics & Statistics Faculty Publications

The Electron Ion Collider (EIC), to be constructed at Brookhaven National Laboratory, will collide polarized high-energy electron beams with hadron beams, achieving luminosities of up to 1 X 10³⁴cm⁻²s⁻¹ in the center-mass energy range of 20-140 GeV. Crab cavities are employed to compensate for the geometric luminosity loss caused by a large crossing angle of 25 mrad in the interaction region. The phase noise in crab cavities will induce a significant emittance growth for the hadron beams in the Hadron Storage Ring (HSR). Various models have been utilized to study the effects of crab cavity …

Accelerating Cavity Fault Prediction Using Deep Learning At Jefferson Laboratory, Md M. Rahman, A. Carpenter, K. Iftekharuddin, C. Tennant

Electrical & Computer Engineering Faculty Publications

Accelerating cavities are an integral part of the continuous electron beam accelerator facility (CEBAF) at Jefferson Laboratory. When any of the over 400 cavities in CEBAF experiences a fault, it disrupts beam delivery to experimental user halls. In this study, we propose the use of a deep learning model to predict slowly developing cavity faults. By utilizing pre-fault signals, we train a long short-term memory-convolutional neural network binary classifier to distinguish between radio-frequency (RF) signals during normal operation and RF signals indicative of impending faults. We optimize the model by adjusting the fault confidence threshold and implementing a multiple consecutive …

Computationally Modeling The Human-Structure Interaction Response Of An Occupied Cantilevered Structure, Brennan Smith

Honors Theses

There is a limited understanding of the impact that passive human occupants have on a dynamic structural system, referred to as Human-Structure Interaction (HSI). Cantilevers are naturally prone to excessive vibrations due to their long unsupported spans, and cantilevered structures such as those commonly found in the seating area of a stadium facility or concert hall are designed to support a high density of occupancy.

This study determined that HSI in cantilevered structures can be modeled using a simple two-degree-of-freedom system. The results of the model were validated by data that was collected on a small-scale laboratory structure intentionally designed …

Processing, Stability, And High-Temperature Properties Of Doped Lacro3-Based Refractory Ceramics And Composites For Harsh Environments Sensing Applications, Javier A. Mena

Graduate Theses, Dissertations, and Problem Reports (ETD)

In order to test and monitor the operational stability and conditions of various energy, transportation, and manufacturing systems and their components, accurate sensors capable of operating at temperatures over 1000 °C in various environments for long durations are required. In addition, many of these harsh environmental systems do not permit sensors to be directly inserted into the environment, so the sensors need to be embedded into the surrounding support or thermal protective materials. Some technological and industrial applications that require the use of harsh environment conditions sensing include nuclear and chemical reactors, jet engines, heavyduty gas turbines, rotating bearings in …

Understanding Sextupole, T. Zolkin, I. Morozov, S. Nagaitsev

Physics Faculty Publications

In this study, we reassess the dynamics within a simple accelerator lattice featuring a single degree of freedom and incorporating a sextupole magnet. In the initial segment, we revisit the Hénon quadratic map, a representation of a general transformation with quadratic nonlinearity. In the subsequent section, we unveil that a conventional sextupole is essentially a composite structure, comprising an integrable McMillan sextupole and octupole, along with non-integrable corrections of higher orders. This fresh perspective sheds light on the fundamental nature of the sextupole magnet, providing a more nuanced understanding of its far-from-trivial chaotic dynamics. Importantly, it enables the description of …

Investigation Of Hot-Spots Due To Trapped Flux In Niobium Superconducting Radiofrequency Cavities, B. Khanal, P. Dhakal

Physics Faculty Publications

One of the significant sources of residual losses in superconducting radio-frequency cavities is magnetic flux trapped during the cool-down due to the incomplete Messier effect. If the trapped vortices are non-uniformly distributed on the cavity surface, the temperature mapping revealed the “hot-spots” at the location of high density of pinned vortices. Here, we performed a rf test on 1.3 GHz single cell cavity with the combination of the temperature mapping system. The temperature mapping reveled the development of the hot spots with the increase in rf field inside the cavity. When magnetic field is trapped locally on the surface of …

Particle Accelerator Spin-Transparent Storage Rings For Beyond State-Of-The-Art Science, R. Suleiman, Y. Derbenev, M. Grau, V. Morozov

Physics Faculty Publications

We will describe spin-transparent storage rings that exhibit spin-coherence times of several hours and store a large number of particles and their use in novel applications. For example, these rings can be used to directly measure the electric dipole moment of the electron, relevant to CP violation and matter-antimatter asymmetry in the universe, and to search for dark energy and ultra-light dark matter*. These rings can also serve as a compelling platform for quantum computing. In this presentation, we will describe how spin-transparent rings can be used in conjunction with ion traps to enhance scalability and increase quantum coherence times …

Photoluminescence Of Beryllium-Related Defects In Gallium Nitride, Mykhailo Vorobiov, Mykhailo Vorobiov

Theses and Dissertations

This study explores the potential of beryllium (Be) as an alternative dopant to magnesium (Mg) for achieving higher hole concentrations in gallium nitride (GaN). Despite Mg prominence as an acceptor in optoelectronic and high-power devices, its deep acceptor level at 0.22 eV above the valence band limits its effectiveness. By examining Be, this research aims to pave the way to overcoming these limitations and extend the findings to aluminum nitride and aluminum gallium nitride (AlGaN) alloy. Key contributions of this work include. i)Identification of three Be-related luminescence bands in GaN through photoluminescence spectroscopy, improving the understanding needed for further material …

Hydrodynamics Of Drops And Particles Driven By Marangoni And Diffusiophoretic Forces, Subramaniam Chembai Ganesh

Dissertations and Theses

This study investigates the hydrodynamics of particles and drops driven by forces generated by an asymmetrical physical and chemical surrounding environment. In the first part, a novel colloidal motor design driven by surface tension forces is proposed, utilizing an active Janus particle encapsulated in an immiscible liquid drop to form a compound drop/particle. Marangoni forces induced by asymmetric solute adsorption at the liquid-liquid interface of the drop propels the compound system. The propulsion speeds of the motor are analyzed for various relative sizes and configurations of the Janus particle and the encapsulating drop and the effects of varying the transport …

Effect Of Annealing On Photoluminescence From Defects In Gan, Oleksandr Andrieiev

Theses and Dissertations

Annealing is a critical process in modern GaN technology, essential for achieving p-type conductivity by activating the Mg_Ga acceptor, as first demonstrated by Shuji Nakamura in the early 1990s. Despite the omnipresence of hydrogen as an impurity in GaN crystals, the precise mechanisms governing hydrogen diffusion and acceptor passivation remain only partially understood. The presented research investigates the effects of annealing-induced activation and hydrogen passivation on C and Be acceptors in GaN grown by MOCVD, HVPE, and MBE methods. We explored these effects by using several annealing techniques, gas compositions, and thermal regimes. A transient behavior between the C …

Effects Of Electron Beam Irradiation On Crmnv And Crmntiv High Entropy Alloys: Nano-Mechanical, Structural, And Thermodynamic Perspectives, N. A. Sultana, Y. S. Mohammed, S. J. Pendleton, J. Vennekate, G. Ciovati, X. Li, H. Baumgart, A. A. Elmustafa

Mechanical & Aerospace Engineering Faculty Publications

Beam exit windows are crucial components of any particle accelerator as they provide an interface between the beamline vacuum and target material at atmospheric media. For high beam power machines, special materials and designs are required to withstand high radiation and mechanical loads, while minimizing energy loss during transition and maximizing window lifetime. This research investigates the impact of electron beam exposure to bulk CrMnV and CrMnTiV high entropy alloys (HEAs) with the primary goal of identifying suitable candidate materials for the design of robust and durable exit window settings. The selection criteria include intrinsic characteristics, power dissipation, and mechanical …

Disaggregating Longer-Term Trends From Seasonal Variations In Measured Pv System Performance, Chibuisi Chinasaokwu Okorieimoh, Brian Norton, Michael Conlon

Articles

Photovoltaic (PV) systems are widely adopted for renewable energy generation, but their performance is influenced by complex interactions between longer-term trends and seasonal variations. This study aims to remove these factors and provide valuable insights for optimising PV system operation. We employ comprehensive datasets of measured PV system performance over five years, focusing on identifying the distinct contributions of longer-term trends and seasonal effects. To achieve this, we develop a novel analytical framework that combines time series and statistical analytical techniques. By applying this framework to the extensive performance data, we successfully break down the overall PV system output into …

Magneto-Thermal Limitations In Superconducting Cavities At High Radio-Frequency Fields, I. Parajuli, G. Ciovati, A. Gurevich

Physics Faculty Publications

The performance of superconducting radio-frequency Nb cavities at high radio-frequency (rf) fields in the absence of field emission can be limited by either a sharp decrease of the quality factor Q₀(B_p) above peak surface magnetic fields B_p ∼100 mT or by a quench. We have measured Q₀(B_p) at 2 K of several 1.3 GHz single-cell Nb cavities with different grain sizes, and with different ambient magnetic fields and cooldown rates below the critical temperature. Temperature mapping and a novel magnetic field mapping systems were used to find the location of “hot-spots” …

A Compton Transmission Polarimeter For Dc And Srf Electron Photo-Injectors, G. Blume, M. Bruker, C. Cuevas, H. Dong, Benjamin Fernandes Neres, P. Ghoshal, S. Gopinath, J. Grames, S. Gregory, G. Hays, C. Le Galliard, Sylvain Marsillac, B. Moffit, Thi Nguyen Trung, M. Poelker, R. Suleiman, E. Voutier, S. Zhang

Physics Faculty Publications

A polarimeter was constructed to measure the longitudinal polarization of a spin-polarized electron beam at 5 and 7 MeV. The polarimeter takes advantage of Compton scattering between circularly polarized bremsstrahlung photons produced by a longitudinally polarized electron beam striking a copper radiator and the spin-polarized electrons orbiting the iron atoms of an analyzing magnet. This so-called Compton transmission polarimeter is compact and relatively inexpensive compared to Mott-scattering polarimeters because no spin manipulator is required. This work presents the design of the radiator, analyzing magnet, photon detector assembly, and data acquisition system of the Compton transmission polarimeter as well as beam …

Field, Frequency, And Temperature Dependencies Of The Surface Resistance Of Nitrogen Diffused Niobium Superconducting Radio Frequency Cavities, P. Dhakal, B. D. Khanal, A. Gurevich, G. Ciovati

Physics Faculty Publications

We investigate the rf performance of several single-cell superconducting radio-frequency cavities subjected to low temperature heat treatment in nitrogen environment. The cavities were treated at temperature 120–165 °C for an extended period of time (24–48 h) either in high vacuum or in a low partial pressure of ultrapure nitrogen. The improvement in 𝑄0 with a 𝑄 rise was observed when nitrogen gas was injected at ∼300 °C during the cavity cooldown from 800 °C and held at 165 °C, without any degradation in accelerating gradient over the baseline performance. The treatment was applied to several elliptical cavities with frequency ranging …

Beam Correction For Multi-Pass Arcs In Ffa@ Cebaf: Status Update, A. Coxe, J. F. Benesch, R.M. Bodenstein, K. E. Deitrick, K. Price, T. Satogata

Physics Faculty Publications

As design and simulation studies for the energy upgrade at the Continuous Electron Beam Accelerator Facility progress, both static and dynamic errors must be addressed. The current upgrade design introduces a pair of Fixed-Field Alternating-Gradient (FFA) recirculating arcs: one in the East recirculating arc, and one in the West. In the present design, each FFA arc supports six concurrent beam energies in the same beam pipe; these must be concurrently corrected for both static and dynamic errors. This document discusses the present beam correction strategies applied in simulation.