Plasma and Beam Physics Commons^™

Spark Discharge Coupled Laser Multicharged Ion Source, Md. Haider A. Shaim, Hani E. Elsayed-Ali

Electrical & Computer Engineering Faculty Publications

A spark discharge is coupled to a laser multicharged ion source to enhance ion generation. The laser plasma triggers a spark discharge with electrodes located in front of the ablated target. For an aluminum target, the spark discharge results in significant enhancement in the generation of multicharged ions along with higher charge states than observed with the laser source alone. When a Nd:YAG laser pulse (wavelength 1064 nm, pulse width 7.4 ns, pulse energy 72 mJ, laser spot area on target 0.0024 cm²) is used, the total multicharged ions detected by a Faraday cup is 1.0 nC with …

Development And Testing Of A 325 Mhz Β0= 0.82 Single-Spoke Cavity, C. S. Hopper, Hyekyoung Park, J. R. Delayen

Physics Faculty Publications

A single-spoke cavity operating at 325 MHz with geometric beta of 0.82 has been developed and tested. Initial results* showed high levels of field emission which limited the achievable gradient. Several rounds of helium processing significantly improved the cavity performance. Here we discuss the development process and report on the improved results.

Design Of Dressed Crab Cavities For The Hl-Lhc Upgrade, C. Zanoni, K. Artoos, S. Atieh, I. Aviles-Santillana, S. Belomestnykh, I. Ben-Zvi, J.P. Brachet, G. Burt, R. Calaga, O. Captina, S. U. De Silva, J. R. Delayen, A. May, K. Marinov, R. Olave, H. Park, N. Templeton

Physics Faculty Publications

The HL-LHC upgrade relies on a set of RF crab cavities for reaching its goals. Two parallel concepts, the Double Quarter Wave (DQW) and the RF Dipole (RFD), are going through a comprehensive design process along with preparation of fabrication in view of extensive tests with beam in SPS. High Order Modes (HOM) couplers are critical in providing damping in RF cavities for operation in accelerators. HOM prototyping and fabrication have recently started at CERN. In this paper, an overview of the final geometry is provided along with an insight in the mechanical and thermal analyses performed to validate the …

Performance Evaluation Of Hl-Lhc Crab Cavity Prototypes In A Cern Vertical Test Cryostat, K. G. Hernández-Chahín, A. Macpherson, C. Jarrige, M. Navarro-Tapia, R. Torres Sánchez, G. Burt, A. Tutte, S. U. De Silva

Physics Faculty Publications

Three proof-of-principle compact crab cavity designs have been fabricated in bulk niobium and cold tested at their home labs, as a first validation step towards the High Luminosity LHC project. As a cross check, all three bare cavities have been retested at CERN, in order to cross check their performance, and cross-calibrate the CERN SRF cold test facilities. While achievable transverse deflecting voltage is the key performance indicator, secondary performance aspects derived from multiple cavity monitoring systems are also discussed. Temperature mapping profiles, quench detection, material properties, and trapped magnetic flux effects have been assessed, and the influence on performance …

Experiment And Results On Plasma Etching Of Srf Cavities, J. Upadhyay, Do Im, J. Peshl, S. Popovic, L. Vuskovic, A. -M. Valente-Feliciano, L. Phillips

Physics Faculty Publications

The inner surfaces of SRF cavities are currently chemically treated (etched or electro polished) to achieve the state of the art RF performance. We designed an apparatus and developed a method for plasma etching of the inner surface for SRF cavities. The process parameters (pressure, power, gas concentration, diameter and shape of the inner electrode, temperature and positive dc bias at inner electrode) are optimized for cylindrical geometry. The etch rate non-uniformity has been overcome by simultaneous translation of the gas point-of-entry and the inner electrode during the processing. A single cell SRF cavity has been centrifugally barrel polished, chemically …

Imperfection And Tolerance Analysis Of Hom Couplers For Odu/Slac 400 Mhz Crabbing Cavity, S. U. De Silva, R. G. Olave, H. Park, J. R. Delayen, Z. Li

Physics Faculty Publications

In preparation for the LHC High Luminosity upgrade, a 400 MHz crab cavity has been developed jointly at ODU/SLAC, including two higher order mode couplers designed to dampen the wakefields in order to comply with the impedance budget specified for the LHC system. During fabrication, assembly, and processing of the couplers, a number of imperfections may arise that could modify the higher order mode spectrum and the associated impedance for each mode. We present here a detailed study of the imperfections of the horizontal- and vertical- HOM couplers, and the associated allowed tolerances for manufacture, assembly and processing.

Beam Dynamics Studies Of 499 Mhz Superconducting Rf-Dipole Deflecting Cavity System, S. U. De Silva, K. E. Deitrick, H. Park, J. R. Delayen

Physics Faculty Publications

A 499 MHz deflecting cavity has been designed as a three-way beam spreader to separate an electron beam into 3 beams. The rf tests carried out on the superconducting rf-dipole cavity have demonstrated that a transverse voltage of 4.2 MV can be achieved with a single cavity. This paper discusses the beam dynamics on a deflecting structure operating in continuous-wave mode with a relativistic beam. The study includes the analysis on emittance growth, energy spread, and change in bunch size including effects due to field non-uniformities.

Effects Of Crab Cavities Multipole Content In An Electron-Ion Collider, A. Castilla, V. S. Morozov, T. Satogata, J. R. Delayen

Physics Faculty Publications

The impact on the beam dynamics of the Medium Energy Electron-Ion Colider (MEIC) due to the multipole content of the 750 MHz crab cavity was studied using thin multipole elements for 6D phase space particle tracking in ELEGANT. Target values of the sextupole component for the cavity’s field expansion were used to perform preliminary studies on the proton beam stability when compared to the case of pure dipole content of the rf kicks. Finally, important effects on the beam sizes due to non-linear components of the crab cavities’ fields were identified and some criteria for their future study were proposed.

Modeling Crabbing Dynamics In An Electron-Ion Collider, A. Castilla, V. S. Morozov, T. Satogata, J. R. Delayen

Physics Faculty Publications

A local crabbing scheme requires π/2 (mod π) horizontal betatron phase advances from an interaction point (IP) to the crab cavities on each side of it. However, realistic phase advances generated by sets of quadrupoles, or Final Focusing Blocks (FFB), between the crab cavities located in the expanded beam regions and the IP differ slightly from π/2. To understand the effect of crabbing on the beam dynamics in this case, a simple model of the optics of the Medium Energy Electron-Ion Collider (MEIC) including local crabbing was developed using linear matrices and then studied numerically over multiple turns (1000 passes) …

Peppo: Using A Polarized Electron Beam To Produce Polarized Positrons, A. Adeyemi, G.L Gueye, P.A. Adderly, M. L. Stutzman, M. M. Ali, H. Areti, J. F. Benesch, L. S. Cardman, J. Clark, S. Covert, S. Golge, C. Hyde

Physics Faculty Publications

An experiment demonstrating a new method for producing polarized positrons has been performed at the CEBAF accelerator at Jefferson Laboratory. The PEPPo (Polarized Electrons for Polarized Positrons) concept relies on the production of polarized e⁺/e⁻ pairs originating from the bremsstrahlung radiation of a longitudinally polarized electron beam interacting within a 1.0 mm tungsten pair-production target. This paper describes preliminary results of measurements using an 8.2 MeV/c electron beam with polarization 84% to generate positrons in the range of 3.1 to 6.2 MeV/c with polarization as high as ∼80%.

Single And Double Spin Asymmetries For Deeply Virtual Compton Scattering Measured With Clas And A Longitudinally Polarized Proton Target, S. Pisano, A. Biselli, S. Niccolai, K. Adhikari, D. Adikaram, M. J. Amaryan, S. E. Kuhn, L. B. Weinstein, Z. W. Zhao, Clas Collaboration

Physics Faculty Publications

Single-beam, single-target, and double spin asymmetries for hard exclusive electroproduction of a photon on the proton ^→e^→p~ → e'p'γ are presented. The data were taken at Jefferson Lab using the CEBAF large acceptance spectrometer and a longitudinally polarized ¹⁴NH₃ target. The three asymmetries were measured in 165 four-dimensional kinematic bins, covering the widest kinematic range ever explored simultaneously for beam and target-polarization observables in the valence quark region. The kinematic dependences of the obtained asymmetries are discussed and compared to the predictions of models of generalized parton distributions. The measurement of three DVCS spin observables …

Double Spin Asymmetries Of Inclusive Hadron Electroproduction From A Transversely Polarized He-3 Target, Y. X. Zhao, K. Allada, K. Aniol, J.R.M. Annand, T. Averett, F. Benmokhtar, M. Canan

Physics Faculty Publications

We report the measurement of beam-target double spin asymmetries (A_LT) in the inclusive production of identified hadrons, ^→e + ³He^↑ → h + X, using a longitudinally polarized 5.9-GeV electron beam and a transversely polarized ³He target. Hadrons (π^±, K^±, and proton) were detected at 16 ° with an average momentum ( P_h ) = 2.35 GeV/c and a transverse momentum (p_T) coverage from 0.60 to 0.68 GeV/c. Asymmetries from the He-3 target were observed to be nonzero for π^± production when the target was polarized …

Reconfigurable Solid-State Dye-Doped Polymer Ring Resonator Lasers, Hengky Chandrahalim, Xudong Fan

Faculty Publications

This paper presents wavelength configurable on-chip solid-state ring lasers fabricated by a single-mask standard lithography. The single- and coupled-ring resonator hosts were fabricated on a fused-silica wafer and filled with 3,3′-Diethyloxacarbocyanine iodide (CY3), Rhodamine 6G (R6G) and 3,3′-Diethylthiadicarbocyanine iodide (CY5)-doped polymer as the reconfigurable gain media. The recorded lasing threshold was ~220 nJ/mm² per pulse for the single-ring resonator laser with R6G, marking the lowest threshold shown by solid-state dye-doped polymer lasers fabricated with a standard lithography process on a chip. A single-mode lasing from a coupled-ring resonator system with the lasing threshold of ~360 nJ/mm² per pulse …

Longitudinal Target-Spin Asymmetries For Deeply Virtual Compton Scattering, E. Seder, A. Biselli, S. Bültmann, A. Klein, S. E. Kuhn, Y. Prok, Clas Collaboration

Physics Faculty Publications

A measurement of the electroproduction of photons off protons in the deeply inelastic regime was performed at Jefferson Lab using a nearly 6 GeV electron beam, a longitudinally polarized proton target, and the CEBAF Large Acceptance Spectrometer. Target-spin asymmetries for e p → e'p'ɣ events, which arise from the interference of the deeply virtual Compton scattering and the Bethe-Heitler processes, were extracted over the widest kinematics in Q², x_B, t, and ɸ, for 166 four-dimensional bins. In the framework of generalized parton distributions, at leading twist the t dependence of these asymmetries provides insight into …

Crab Cavity And Cryomodule Development For Hl-Lhc, F. Carra, A. A. Carvalho, K. Artoos, S. Atieh, I. A. Santillana, S. Belomestnykh, A. Boucherie, J. P. Brachet, K. Brodzinski, G. Burt, S. U. De Silva, J. R. Delayen, R. Olave, H. Park

Physics Faculty Publications

The HL-LHC project aims at increasing the LHC luminosity by a factor 10 beyond the design value. The installation of a set of RF Crab Cavities to increase bunch crossing angle is one of the key upgrades of the program. Two concepts, Double Quarter Wave (DQW) and RF Dipole (RFD) have been proposed and are being produced in parallel for test in the SPS beam before the next long shutdown of CERN accelerator’s complex. In the retained concept, two cavities are hosted in one single cryomodule, providing thermal insulation and interfacing with RF coupling, tuning, cryogenics and beam vacuum. This …

Engineering Design And Prototype Fabrication Of Hom Couplers For Hl-Lhc Crab Cavities, C. Zanoni, S. Atieh, I. Aviles Santillana, S. Belomestnykh, G. Burt, R. Calaga, S. U. De Silva, J. R. Delayen, R. Olave, H. Park

Physics Faculty Publications

The High-Luminosity upgrade for the LHC relies on a set of RF Crab Cavities for reaching its goals. Two parallel concepts, the Double Quarter Wave (DQW) and the RF Dipole (RFD), are going through a comprehensive design process along with preparation of fabrication in view of extensive tests with beam in SPS. High Order Modes (HOM) couplers are critical in providing damping in RF cavities for operation in accelerators. HOM prototyping and fabrication have recently started at CERN. In this paper, an overview of the final shape is provided along with an insight in the mechanical and thermal analyses performed …

Electromagnetic Design Of 400 Mhz Rf-Dipole Crabbing Cavity For Lhc High Luminosity Upgrade, S.U. De Silva, H. Park, J. R. Delayen, Z. Li

Physics Faculty Publications

The beam crabbing proposed for the LHC High Luminosity Upgrade requires two crabbing systems operating in both horizontal and vertical planes. In addition, the crabbing cavity design needs to meet strict dimensional constraints and functional specifications of the cavities. This paper presents the detailed electromagnetic design including em properties, multipole analysis, multipacting levels of the 400 MHz rf-dipole crabbing cavity.

Superconducting Cavity For The Measurements Of Frequency, Temperature, Rf Field Dependence Of The Surface Resistance, Hyekyoung Park, S.U. De Silva, J. R. Delayen

Physics Faculty Publications

In order to better understand the contributions of the various physical processes to the surface resistance of superconductors the ODU Center for Accelerator Science is developing a half-wave resonator capable of operating between 325 MHz and 1.3 GHz. This will allow the measurement of the temperature and rf field dependence of the surface resistance on the same surface over the range of frequency of interest for particle accelerators and identify the various sources of power dissipation.

Analysis Of A 750 Mhz Srf Dipole Cavity, Alejandro Castilla, J. R. Delayen

Physics Faculty Publications

There is a growing interest in using rf transverse deflecting structures for a plethora of applications in the current and future high performance colliders. In this paper, we present the results of a proof of principle superconducting rf dipole, designed as a prototype for a 750 MHz crabbing corrector for the Medium Energy Electron-Ion Collider (MEIC), which has been successfully tested at 4.2 K and 2 K at the Jefferson Lab’s Vertical Testing Area (VTA). The analysis of its rf performance during cryogenic testing, along with Helium pressure sensitivity, Lorentz detuning, surface resistance, and multipacting processing analysis are presented in …

Secondary Electron Yield Of Electron Beam Welded Areas Of Srf Cavities, M. Basovic, S. Popovic, M. Tomovic, L. Vuskovic, A. Samolov, F. Cuckov

Physics Faculty Publications

Secondary Electron Emission (SEE) is a phenomenon that contributes to the total electron activity inside the Superconducting Radiofrequency (SRF) cavities during the accelerator operation. SEE is highly dependent on the state of the surface. During electron beam welding process, significant amount of heat is introduced into the material causing the microstructure change of Niobium (Nb). Currently, all simulation codes for field emission and multipacting are treating the inside of the cavity as a uniform, homogeneous surface. Due to its complex shape and fabricating procedure, and the sensitivity of the SEE on the surface state, it would be interesting to see …

Design And Prototyping Of A 400 Mhz Rf-Dipole Crabbing Cavity For The Lhc High-Luminosity Upgrade, S. U. De Silva, J. R. Delayen, H. Park, Z. Li, T. H. Nicol

Physics Faculty Publications

LHC High Luminosity Upgrade is in need of two crabbing systems that deflects the beam in both horizontal and vertical planes. The 400 MHz rf-dipole crabbing cavity system is capable of crabbing the proton beam in both planes. At present we are focusing our efforts on a complete crabbing system in the horizontal plane. Prior to LHC installation the crabbing system will be installed for beam test at SPS. The crabbing system consists of two rf-dipole cavities in the cryomodule. This paper discusses the electromagnetic design and mechanical properties of the rf-dipole crabbing system for SPS beam test.

Progress On The Design Of The Polarized Medium Energy Electron Ion Collider At Jlab, F. Lin, S. A. Bogacz, P. D. Brindza, A Camsonne, E. Daly, Y. S. Derbenev, D. Douglas, R. Ent, D. Gaskell, R. L. Geng, A. Castilla, J. R. Delayen, C. E. Hyde, K. Park

Physics Faculty Publications

The Medium-energy Electron Ion Collider (MEIC) at JLab is designed to provide high luminosity and high polarization needed to reach new frontiers in the exploration of nuclear structure. The luminosity, exceeding 10³³ cm^-2s⁻¹ in a broad range of the center-of-mass (CM) energy and maximum luminosity above 10³⁴ cm^-2s⁻¹, is achieved by high-rate collisions of short small-emittance low-charge bunches made possible by high-energy electron cooling of the ion beam and synchrotron radiation damping of the electron beam. The polarization of light ion species (p, d, ³He) can be easily preserved and …

Effects Of Plasma Processing On Secondary Electron Yield Of Niobium Samples, M. Basovic, S. Popovic, M. Tomovic, L. Vuskovic, A. Samolov, F. Cuckov

Physics Faculty Publications

Impurities deposited on the surface of Nb during both the forming and welding of accelerator cavities add to the imperfections of the sheet metal, which then affects the overall performance of the cavities. This leads to a drop in the Q factor and limits the maximum acceleration gradient achievable per unit length of the cavities. The performance can be improved either by adjusting the fabrication and preparation parameters, or by mitigating the effects of fabrication and preparation techniques used. We have developed the experimental setup to determine Secondary Electron Yield (SEY) from the surface of Nb samples. Our aim is …

Langmuir Probe Instrument Suite For Mesosphere Turbulence Experiment Mission, Adam Blake

Doctoral Dissertations and Master's Theses

The Langmuir probe technique is the predominant in-situ plasma diagnostic technique, and is arguably the only measurement technique that is universally own on every sounding rocket investigation. Earth's mesosphere region (80-120 km) is a host of many dynamic phenomena such as the noctilucent clouds, breaking gravity waves, inversion layers, settlement of mesospheric smoke particles, etc. As such it is critical to have a comprehensive suite of plasma diagnostics that can unambiguously measure various plasma parameters.

This thesis deals with the development and testing of three different Langmuir probe implementations suitable for investigation of the mesosphere which are to be launched …

Nonlinear Dichroism In Back-To-Back Double Ionization Of He By An Intense Elliptically Polarized Few-Cycle Extreme Ultraviolet Pulse, Jean Marcel Ngoko Djiokap, N. L. Manakov, A. V. Meremianin, S. X. Hu, L. B. Madsen, Anthony F. Starace

Anthony F. Starace Publications

Control of double ionization of He by means of the polarization and carrier-envelope phase (CEP) of an intense, few-cycle extreme ultraviolet (XUV) pulse is demonstrated numerically by solving the six-dimensional two-electron, time-dependent Schrödinger equation for He interacting with an elliptically polarized XUV pulse. Guided by perturbation theory (PT), we predict the existence of a nonlinear dichroic effect (∝ I^3/2) that is sensitive to the CEP, ellipticity, peak intensity I, and temporal duration of the pulse. This dichroic effect (i.e., the difference of the two-electron angular distributions for opposite helicities of the ionizing XUV pulse) originates from interference of …

Particle Swarms In Confining Geometries, Eric Robert Boomsma

Open Access Dissertations

The transport of micro- and nano-particles in subsurface fluid deposits is an area of increasing interest due to the rising use of these particles for consumer and industrial purposes. Subsurface particle transport is complicated by the presence of fractures and fracture networks which govern the paths that particles will be able to take. In this thesis, subsurface particle transport will be investigated using particle swarms; collections of hydro-dynamically interacting particles which exhibit group behavior. The effects of fluid viscosity, particle properties, fracture geometry, and fracture aperture on swarm behavior were experimentally investigated. ^ Swarm parameters were examined in time with …

Dropwise Condensation Dynamics In Humid Air, Julian Eduardo Castillo Chaco

Open Access Theses

Dropwise condensation of atmospheric water vapor is important in multiple practical engineering applications. The roles of environmental factors and surface morphology/chemistry on the condensation dynamics need to be better understood to enable efficient water-harvesting, dehumidication, and other psychrometric processes. Systems and surfaces that promote faster condensation rates and self-shedding of condensate droplets could lead to improved mass transfer rates and higher water yields in harvesting applications. The thesis presents the design and construction of an experimental facility that allows visualization of the condensation process as a function of relative humidity. Dropwise condensation experiments are performed on a vertically oriented, hydrophobic …

Optical Spectroscopy And Langmuir Probe Diagnostics Of Microwave Plasma In Synthesis Of Graphene-Based Nanomaterials, Alfredo D. Tuesta

Open Access Dissertations

Along with the revolutionary discovery and development of carbon nanostructures, such as carbon nanotubes and graphitic sheets, has arrived the potential for their application in the fields of medicine, bioscience and engineering due to their exceptional structural, thermal and electrical properties. As roll-to-roll plasma deposition systems begin to provide means for large scale production of these nanodevices, a detailed understanding of the environment responsible for their synthesis is imperative in order to more accurately design and control the growth of carbon nanodevices. To date, the understanding of the chemistry and kinetics that govern the synthesis of carbon nanodevices is only …

Positional Control Of Plasmonic Fields And Electron Emission, Robert Campbell Word, Joseph P. Fitzgerald, Rolf Könenkamp

Physics Faculty Publications and Presentations

We report the positional control of plasmonic fields and electron emission in a continuous gap antenna structure of sub-micron size. We show experimentally that a nanoscale area of plasmon-enhanced electron emission can be motioned by changing the polarization of an exciting optical beam of 800 nm wavelength. Finite-difference calculations are presented to support the experiments and to show that the plasmon-enhanced electric field distribution of the antenna can be motioned precisely and predictively.

Quantitative Assessment Of Blood Coagulation By Cold Atmospheric Plasma, Caitlin Heslin, Daniela Boehm, Vladimir Milosavljevic, Michelle Laycock, Patrick J. Cullen, Paula Bourke

Articles

Cold atmospheric plasma (CAP) is produced by ionizing a chosen gas, thereby creating charged and reactive species. The reactive species generated are capable of inducing a range of biomedically relevant interactions including blood coagulation. However, the underlying biochemical processes of plasma-assisted blood coagulation are largely unknown, and data quantifying blood clot formation or the impact of system parameters on the intensity of the blood clot are scarce. In this study, blood coagulation was quantified by measuring hemoglobin absorbance. System parameters of the kINPen plasma jet were investigated and compared, including treatment time, distance from the plasma source and gas flow …