Plasma and Beam Physics Commons^™

Effect Of Anode Size On The Properties Of Constricted Hollow Anode Pulsed Plasma Source, Nirav Patel, Garret Seckinger

Discovery Day - Daytona Beach

With the advent of ion thrusters, burns requiring large velocity changes can be performed with a fraction of the propellant required by traditional chemical rocket engines. However, current ion thrusters produce thrust in the order of millinewtons and thus cannot be viable for launching vehicles or burns requiring velocity changes in a small amount of time. Furthermore, current ion thrusters experience grid and component erosion, where the two grids at the termination of the nozzle slowly erode due to particle impact, and the hot electrodes degrade due to high thermal load. This limits the life of ion engines, which require …

A Feedback Loop Control To Automate Cold Atmospheric Pressure Plasma Based Additive Manufacturing, Arineh Shahbazi

Discovery Day - Daytona Beach

Currently, nanoparticle annealing based additive manufacturing process requires high temperatures, making them unsuitable for a broad range of applications. By lowering the temperature and developing a process to use Cold Atmospheric Pressure Plasma (CAPP) for annealing, many more doors are opened to a wide range of materials, films, and environments for space, communication, and microelectronics. CAPP-based additive manufacturing technology is continually evolving, making projects like nanoparticle annealing more feasible. In this work, we designed a CAPP jet printer assembly consisting of a 0.25-inch outer diameter glass tube connected to a 3D printing nozzle. The flow of Argon gas in the …

Experimental Investigation Of The Discharge Modes Of Nanosecond Pulsed Plasmas At Atmospheric Pressure, Md Ziaur Rahman

Electrical & Computer Engineering Theses & Dissertations

The generation of repeatable and stable nanosecond pulsed atmospheric pressure plasmas is important to non-thermal plasma applications in various fields including medicine, material processing, food processing, and plasma ignition for combustion. This dissertation investigates the atmospheric pressure plasma initiation and formation under 10 – 200 ns pulsed power for electrode configurations applicable for transient plasma ignition (TPI) for combustion. The impacts of pulsed power parameters, gas condition, and electrode geometry on the discharge initiation and modes (i.e., streamer, transient spark and spark) are systematically evaluated for applying TPI for combustion. We evaluated the discharge modes driven by both longer and …

Simulations Of Atmospheric Pressure Streamer Discharges: Mechanisms Of Streamer Propagation And Related Physics, Dejan Nikic

Electrical and Computer Engineering ETDs

Gas discharge simulations are performed with particular focus on photoionization process in a positive streamer discharge. The effects of this process are investigated by isolating the change in photoionization mean free path (MFP) and keeping the additional processes constant. Furthermore, comparison are made between various effects of simulation parameters, such as initial conditions, geometry extent, simula- tion particle count etc. All of these simulations are performed using a modern Direct Simulation Monte Carlo Particle-in-Cell (DSMC-PIC) code developed by Sandia Na- tional Laboratories. Large scale simulations including 1 cm and 5 cm electrode gaps are performed under standard atmospheric condition air. …

Measurements And Scaling Of Ion Propulsion Impulse During Driven Magnetic Reconnection, Fatima Ebrahimi, Nicholas A. O'Gorman, Kush Maheshwari, Jongsoo Yoo, Alexandre Sainterme, Hantao Ji

Faculty Publications

Impulse scaling during magnetic reconnection, the magnetic energy conversion to kinetic energy, via direct Mach probe measurements in Magnetic Reconnection Experiment is examined. Ion exhaust velocity and impulse scalings with reconnecting magnetic field during the push phase of driven reconnection are presented. The outflows and impulse measurements are compared with global MHD simulations. Both measurements and simulations reveal a favorable scaling, greater than linear, of impulse with reconnecting field. These scaling results establish that magnetic reconnection could be utilized for plasma propulsion.

Determining The Electric Field In A 10 Ns Pulsed Plasma In Fuel-Air Mixtures Using Efish, Md Ziaur Rahman, Christopher J. Kliewer, Brian D. Patterson, Chunqi Jiang

Bioelectrics Publications

Transient plasma ignition (TPI) utilizes non-equilibrium plasmas, produced by nanosecond high-voltage pulses, to improve lean-fuel combustion performance and reduce emission. It is known that the relatively high reduced electric field (E/N) in TPI plays an important role in generating energetic electrons and facilitating energy-efficient radical productions, resulting in reliable ignition for lean combustion. Determining the reduced electric field in the discharge is hence important for the understanding of the TPI process and ultimately allowing for the control of the plasma chemistry. This study reports spatiotemporally resolved measurements of the electric field (E) in a 10 ns pulsed plasma that is …

Low Energy Ion Irradiation Effects In Electronic Devices And Materials, David C. Mccall

All Dissertations

The physics and engineering of ion-solid interactions are governed by the ion beam characteristics (flux, charge, energy) and target(s) in question. Here I present work on two projects related to the extraction of a high flux of low charge state Argon ions from a commercial plasma source and the irradiation of an engineered target, a transistor, with high charge state Argon ions.

An end-Hall ion source that produces a a high current plasma of ions and electrons in a rough vacuum environment is characterized. Using a Langmuir probe and multiple pressure measurements, the ion and electron content of the source …

Development Of A Near Terahertz Backward Wave Oscillator Using Standard Waveguide, Alexander Glick

Electrical and Computer Engineering ETDs

There is a demand for terahertz (THz) frequency radiation sources. Applications include, but are not limited to, imaging for medical and security purposes, biochemical and organic spectroscopy, and velocimetry. Historically, there was a limited supply of THz devices due to technological limitations. In recent years much progress has been made to reduce this “gap” in supply and demand for THz sources. This work proposes a vacuum electronic device that produces high power, extremely high frequency radiation in the G-band, by utilizing a backward wave oscillator (BWO) based on WR3 standard waveguide. This device is compact, fundamentally simple, and has great …

Characterization Of A Magnetically Contained Hot Filament Plasma Source With A Wide-Sweeping Langmuir Probe, Jonas Rowan

Doctoral Dissertations and Master's Theses

Ionospheric plasma research in the Space and Atmospheric Instrumentation Laboratory’s Space Plasma Chamber has been hindered by the lack of a suitable plasma diagnostic instrument and understanding of its hot-filament plasma source. This thesis describes efforts made to remedy both problems. A wide-range Sweeping Langmuir Probe was developed with a ±35 V sweeping range to fully analyze ion and electron saturation regions in the entire IV curve. A method was derived to estimate the chamber source’s filament temperatures. The new Langmuir probe was integrated into a refurbished automated system designed in Python to measure plasma parameters for various chamber conditions, …

Power-Beaming: Wireless Energy Transfer Using Lasers, Spencer L. Barnett

ATU Scholars Symposium

The objective of the project is to implement a wireless energy transfer system utilizing laser technology. This system involves modulating the laser’s beam profile and spatial distribution through precise optical manipulation. The energy transmitted by the laser is captured by a photovoltaic array, commonly referred to as a solar panel, which is engineered to convert incident photons into direct current (DC) electrical power. The current challenge is to develop a reliable wireless energy transfer mechanism capable of operating over extended distances, thereby overcoming the constraints imposed by wired connections, particularly in environments where wiring is impractical, such as in space. …

Developing Fixed-Bias Langmuir Probes For Multi-Point Constellation Deployments, Henry Carter Valentine

Doctoral Dissertations and Master's Theses

Since their initial development in the early 20th century, electrostatic Langmuir probes have proved invaluable in terrestrial and interplanetary ionospheric sounding applications. When deployed aboard rocket and satellite platforms, these probes yield high-cadence, in-situ measurements of key plasma parameters such as electron density, ion density, and electron temperature. Furthermore, the efficacy of Langmuir probes in characterizing the three-dimensional structure and dynamics of ionospheric plasmas can be augmented by the technique of multi-payload deployments. In this work, we discuss the design, development, and analysis of fixed-bias Langmuir probes constructed for two multi-point science campaigns: the Mars-bound, dual-satellite Escape and Plasma Acceleration …

Streamer Discharge Simulation For Plasma-Assisted Combustion, Stuart Jairo Reyes

Electrical & Computer Engineering Theses & Dissertations

A common and successful method to achieve atmospheric pressure fuel-air plasma-assisted combustion is through repetitive ns pulsed discharges and dielectric-barrier discharge. The transient phase in these discharges is dominated by transport influenced by strong space charges produced by ionization fronts, this can be best represented by the streamer model. The function of non-thermal plasma in these discharges is to excite the species in the fuel-air mixture to produce radicals which accelerate the chemical conversion reactions which directly lead to temperature rise, ultimately culminating in ignition. Therefore, the characterization of the streamer and its energy partitioning is essential to developing a …

Determining The Transient Electric Field And The Effect Of Pulse Repetition Frequency On The Field In A Repetitive 10-Ns Pulsed Discharge In A Quiescent Ch₄-Air Mixture, Chunqi Jiang

Bioelectrics Publications

The goal of this research is to understand the underlying physics enabled by nanosecond pulsed power in a discharge initiation and the following physicochemical processes that favor lean-fuel plasma ignition for combustion. The hypothesis of this project is that pulsed power waveforms such as the pulse repetition frequency (PRF), voltage amplitude, and dielectric surface alter the reduced electric field during the initiation of the discharge, resulting in different plasma properties, which will vary the physicochemical processes for efficient and selective radical productions. This is especially important for lean-burn combustion and reducing emission.

The Effect Of Electrode Geometry On Excited Species Production In Atmospheric Pressure Air-Hydrogen Streamer Discharge, Shirshak Kumar Dhali, Stuart Reyes

Electrical & Computer Engineering Faculty Publications

When a gas is overvolted at or near atmospheric pressure, it results in a streamer discharge formation. Electrode geometries exert significant impact on the electrical breakdown of gases by altering the spatial profile of the electric field. In many applications the efficient generation of radicals is critical and is determined by the characteristics of the streamer discharge. We examine the effect of electrode geometry on the streamer characteristics and the production of radicals. This is performed for three different electrode geometries: plane–plane, pin–plane, and pin–pin. A two-dimensional rotationally symmetric fluid model is used for the streamer discharge simulation in the …

Polarized Photocathode R&D At Bnl And Spin Consideration For The Eic Preinjector, Jyoti Biswas, Erdong Wang, Omer Rahman, John Skaritka, Adam Masters, Sylvain Marsillac, Tai-De Li

Electrical & Computer Engineering Faculty Publications

Superlattice GaAs photocathodes are vital for producing polarized electron beams for the Electron-Ion Collider (EIC) at Brookhaven National Laboratory. The electron pre-injector at the EIC requires a 7 nC bunch with at least 85% spin polarization from a GaAs-based superlattice cathode. The doping density of the very surface layer of the cathode needs to be optimized to extract a high bunch charge beam from the high-voltage DC gun. The polarization axis of the emitted beam is longitudinal, and it will be rotated to transverse direction using two Wien filters, each rotating the spin by 45 degrees. In this paper, we …

Streamer Discharge Modeling For Plasma-Assisted Combustion, Stuart Reyes, Shirshak Kumar Dhali

Electrical & Computer Engineering Faculty Publications

Some of the popular and successful atmospheric pressure fuel/air plasma-assisted combustion methods use repetitive ns pulsed discharges and dielectric-barrier discharges. The transient phase in such discharges is dominated by transport under strong space charge from ionization fronts, which is best characterized by the streamer model. The role of the nonthermal plasma in such discharges is to produce radicals, which accelerates the chemical conversion reaction leading to temperature rise and ignition. Therefore, the characterization of the streamer and its energy partitioning is essential to develop a predictive model. We examine the important characteristics of streamers that influence combustion and develop some …

Optical Investigation Of A Low-Pressure Plasma In A Superconducting Radio-Frequency Cavity, Zachary A. Caudell

Electrical & Computer Engineering Theses & Dissertations

The state-of-the-art cryomodules for particle accelerators use superconducting radio-frequency (SRF) cavities. It is known that accumulation of hydrocarbon impurities reduces the cavity surface work function, decreasing cryomodule performance metrics such as field emission, thermal stability, and accelerating gradients. An in-situ method of plasma processing has recently been developed to clean the cavities and restore cryomodule performance [1]. This study is to understand the properties of the low-pressure plasmas generated in a C100 SRF cavity and ultimately to improve the performance of plasma surface cleaning using optical emission spectroscopy. Using a 500 mm focal length Czerny-Turner monochromator coupled with a photomultiplier …

Redirection Of Current In A Dense Plasma Focus, Rocky Gonzalez

UNLV Theses, Dissertations, Professional Papers, and Capstones

The Mission Support & Test Services (MSTS) reports that significant amounts of energy needed for generating high energy neutrons is lost within a Dense Plasma Focus between its pinch-end of the anode stalk and at its base near the insulating sleeve. It is their mission and the goal of this research effort to both experimentally and theoretically study current redirection in a DPF during and after pinch dynamics. It is hypothesized that current redirection, due to restrike, behind the dynamic sheath of a dense plasma focus will result in a measurable change in the magnetic field along the longitudinal axis …

Plasma Diagnostics For Anode Cathode Plasmas And High Energy Density Physics On A Linear Transformer Driver, Robert Beattie-Rossberg

Electrical and Computer Engineering ETDs

A twelve-brick air insulated linear transformer driver (LTD) was characterized by charging to voltages ranging from 30 to 70 kV and delivering energy to two separate resistive loads. Various plasma diagnostics were built and fielded with an emphasis on the design, implementation and analysis of a Mach Zehnder interferometer, a moiré deflectometer and a spectroscopy system providing information on the temporal evolution of plasma electron density and atomic composition. Rogowski coils, XRD radiation detectors, framing camera images and time integrated DSLR images are used to further understand load conditions where current data, x ray radiation data, velocity data and instability …

Adaptive Plasmonic Metasurfaces For Radiative Cooling And Passive Thermoregulation, Azadeh Didari-Bader, Nooshin M. Estakhri, Nasim Mohammadi Estrakhri

Engineering Faculty Articles and Research

In this work, we investigate a class of planar photonic structures operating as passive thermoregulators. The radiative cooling process is adjusted through the incorporation of a phase change material (Vanadium Dioxide, VO₂) in conjunction with a layer of transparent conductive oxide (Aluminum-doped Zinc Oxide, AZO). VO₂ is known to undergo a phase transition from the “dielectric” phase to the “plasmonic” or “metallic” phase at a critical temperature close to 68°C. In addition, AZO shows plasmonic properties at the long-wave infrared spectrum, which, combined with VO₂, provides a rich platform to achieve low reflections across the …

A High-Precision Electron Emission Model: Computational Methods For Nanoscale Structures, Alister J. Tencate

Graduate Research Theses & Dissertations

The high-intensity, high-brightness and precision frontiers for charged particle beams are an increasingly important focus for study. Electron microscopy has demonstrated high quality beams from a single nanotip emitter, and cathodes of structured nanoscale arrays show promise as ultracold electron sources. Optimization of the cathode design for precision applications necessitates a detailed treatment of the interplay between the structure geometry, quantum mechanical emission mechanism, and electromagnetic interactions between the emitted electrons and the boundary interface. This dissertation details the numerical tools developed to simulate these processes efficiently with enough fidelity to be accurate even in the ultracold regime.

Conventional simulation …

Arrayed Waveguide Lens For Beam Steering, Mostafa Honari-Latifpour, Ali Binaie, Mohammad Amin Eftekhar, Nicholas Madamopoulos, Mohammad-Ali Miri

Publications and Research

Integrated planar lenses are critical components for analog optical information processing that enable a wide range of applications including beam steering. Conventional planar lenses require gradient index control which makes their on-chip realization challenging. Here, we introduce a new approach for beam steering by designing an array of coupled waveguides with segmented tails that allow for simultaneously achieving planar lensing and off-chip radiation. The proposed arrayed waveguide lens is built on engineering the evanescent coupling between adjacent channels to realize a photonic lattice with an equi-distant ladder of propagation constants that emulates the continuous parabolic index profile. Through coupled-mode analysis …

Design And Commissioning Of An E-Beam Irradiation Beamline At The Upgraded Injector Test Facility At Jefferson Lab, Xi Li, Helmut Baumgart, Charles Bott, Gianluigi Ciovati, Shaun Gregory, Fay Hannon, Mike Mccaughan, Robert Pearce, Matthew Poelker, Hannes Vennekate, Shaoheng Wang

Electrical & Computer Engineering Faculty Publications

The Upgraded Injector Test Facility (UITF) at Jefferson Lab is a continuous-wave superconducting linear accelerator capable of providing an electron beam with energy up to 10 MeV. A beamline for electron-beam irradiation has been designed, installed and successfully commissioned at this facility, aimed at the degradation study of 1,4-dioxane and per- and polyfluoroalkyl substances (PFAS) in wastewater treatment. A solenoid with a peak axial magnetic field of up to 0.28 T and a set of raster coils were used to obtain a Gaussian beam profile with a transverse standard deviation of ∼15.0 mm at the target location. Monte-Carlo simulations using …

Foundations Of Plasmas For Medical Applications, T. Von Woedtke, Mounir Laroussi, M. Gherardi

Electrical & Computer Engineering Faculty Publications

Plasma medicine refers to the application of nonequilibrium plasmas at approximately body temperature, for therapeutic purposes. Nonequilibrium plasmas are weakly ionized gases which contain charged and neutral species and electric fields, and emit radiation, particularly in the visible and ultraviolet range. Medically-relevant cold atmospheric pressure plasma (CAP) sources and devices are usually dielectric barrier discharges and nonequilibrium atmospheric pressure plasma jets. Plasma diagnostic methods and modelling approaches are used to characterize the densities and fluxes of active plasma species and their interaction with surrounding matter. In addition to the direct application of plasma onto living tissue, the treatment of liquids …

Pseudo-Modal Expansions For Generating Random Electromagnetic Beams, Milo W. Hyde Iv, Olga Korotkova

Faculty Publications

Excerpt: We derive two pseudo-modal expansions that provide insight into the structure of stationary electromagnetic sources and can be used for their physical realization and in computer simulations. Both expansions are derived from the vectorial version of Bochner’s theorem of functional analysis.

Grand Challenges In Low Temperature Plasmas, Xinpei Lu, Peter J. Bruggeman, Stephan Reuter, George Naidis, Annemie Bogaerts, Mounir Laroussi, Michael Keidar, Eric Robert, Jean-Michel Pouvesle, Dawei Liu, Kostya (Ken) Ostrikov

Electrical & Computer Engineering Faculty Publications

Low temperature plasmas (LTPs) enable to create a highly reactive environment at near ambient temperatures due to the energetic electrons with typical kinetic energies in the range of 1 to 10 eV (1 eV = 11600K), which are being used in applications ranging from plasma etching of electronic chips and additive manufacturing to plasma-assisted combustion. LTPs are at the core of many advanced technologies. Without LTPs, many of the conveniences of modern society would simply not exist. New applications of LTPs are continuously being proposed. Researchers are facing many grand challenges before these new applications can be translated to practice. …

Beamline For E-Beam Processing At Uitf, G. Ciovati, C. Bott, S. Gregory, F. Hannon, Xi Li, M. Mccaughan, R. Pearce, M. Poelker, H. Vennekate

Electrical & Computer Engineering Faculty Publications

No abstract provided.

Numerical Investigations Of 2-D Magnetic Nozzles On Pulsed Plasma Plumes, Joshua Daniel Burch

Masters Theses

"This research presents studies of a novel type of magnetic nozzle that allows for three-dimensional (3-D) steering of a plasma plume. Numerical simulations were performed using Tech-X's USim® software to quantify the nozzle's capabilities. A2-D planar magnetic nozzle was applied to plumes of a nominal pulsed inductive plasma (PIP) source with discharge parameters similar to those of Missouri S&T's Missouri Plasmoid Experiment (MPX). Argon and xenon plumes were considered. Simulations were verified and validated through a mesh convergence study as well as comparison with available experimental data. Periodicity was achieved over the simulation run time and phase angle samples were …

On The Dynamic Generation Of Megagauss-Level Magnetic Fields On 100-Ns Timescales To Stabilize And Magnetize Pulsed-Power-Driven Liner Implosions, Gabriel A. Shipley

Electrical and Computer Engineering ETDs

This dissertation presents analysis of experiments and simulations executed to develop the auto-magnetizing liner concept (AutoMag) for use as an alternative premagnetization mechanism for MagLIF. Tests of each stage of AutoMag (magnetization, dielectric breakdown, and implosion) were executed on the Mykonos accelerator and the Z accelerator. Experiments demonstrate strong peak axial magnetic field production (20 – 150 T), dielectric breakdown initiation that depends on global induced electric field across the target, and a level of cylindrical implosion uniformity high enough to be useful for prospective fusion-fuel-filled (auto-magnetized MagLIF) experiments.

This dissertation also presents detailed simulations of the Solid Liner Dynamic …

Design Of A 10 Mev Beamline At The Upgraded Injector Test Facility For E-Beam Irradiation, Xi Li, Helmut Baumgart, Gianluigi Ciovati, F.E. Hannon, S. Wang

Electrical & Computer Engineering Faculty Publications

Electron beam irradiation near 10 MeV is suitable for wastewater treatment. The Upgraded Injector Test Facility (UITF) at Jefferson Lab is a CW superconducting linear accelerator capable of providing an electron beam of energy up to 10 MeV and up to 100 µA current. This contribution presents the beam transport simulations for a beamline to be used for the irradiation of wastewater samples at the UITF. The simulations were done using the code General Particle Tracer with the goal of obtaining an 8 MeV electron beam of radius (3-σ) of ~2.4 cm. The achieved energy spread is ~74.5 keV. The …