Plasma and Beam Physics Commons^™

Cold Plasma Treatment Of Hydroponically Grown Basil: Effects On Essential Oil Composition For Sustainable Applications (Ocimum Basilicum), Judith Serwaa Marfo

Seton Hall University Dissertations and Theses (ETDs)

Abstract Essential oils are known to have medicinal benefits and pharmaceutical applications. This study investigates the impact of cold plasma treatment on hydroponically cultivated basil (Ocimum basilicum), focusing on physical growth traits, and essential oil composition. Preliminary trials validated our solvent extraction protocol using IPA, hexanes, and methanol without heat on store-bought basil. Rotary evaporation and GC-FID analysis successfully identified key compounds; eugenol, estragole, eucalyptol, and linalool. Plasma-treated hydroponic plants exhibited enhanced physical characteristics, including larger leaves and intensified green pigmentation, compared to untreated controls under identical conditions. The plasma treatment didn't just increase how much oil was extracted, but …

Calculating Potential Energy Curves Of Molecular Hydrogen And Its Ion Using Psi4 For Blinc Fusion Applications*, Angelina Castillo, Oscar Coral, Canaan Hercules, Blake Laing, Vola Andrianarijaona

Campus Research Month

Southern Adventist University’s Beamline for Ionic and Neutral Collisions (BLINC) is investigating the interactions between hydrogen molecules and fusion particles. To perform in-house theoretical calculations, the BLINC Theory and Analysis Group is testing Psi4 as a viable computational method for BLINC fusion research. Successful calculations of the potential energy curves and dissociation energies of H₂ and H₂⁺ have been completed and compared to known values. Preliminary results align with known values, demonstrating Psi4’s potential for BLINC research. Future work will focus on the vibrational energies, wavefunctions, and transition probabilities of H₂ and H₂⁺.

Effects Of Plasma-Activated Water On Wheat: Germination And Seedling Development, Wafaa Abdulrazzaq Abdullah, Hadeel O. Ismael, Duaa A. Uamran, Hammad R. Humud

Karbala International Journal of Modern Science

The food sector must contend with issues such as pathogen resistance to some of the available chemical agents, environmental pollution, and climate change to provide healthy food for livestock and people. The application of atmospheric pressure plasma jets (APPJs) is one potential solution for such problems. Plasma is appropriate for effective surface decontamination regarding food products and seeds, surface decontamination, and achieving improved agricultural production yields. The impact of plasma-activated water (PAW) produced by plasma jet discharge (PJD) system on in vitro-cultivated wheat seeds is examined in this work. For this aim, a plasma jet system was constructed with a …

Du Undergraduate Showcase Abstracts: Research, Scholarship, And Creative Works, Kabe Aberle, Nadia Kako, Kateri Mcrae, Brooke Agulnek, Sky Palmon, Yasmine Ramirez, Francisca Aguirre Beltran, Ashley Juarez, Bridget Kim, Tessa Appel, Sterling Kerr, Spencer Ingley, Gabe Meyer, Robin Tinghitella, Dale Broder, Lily Baeza, Chloe Beers, Julia Coakley, Whitney Kelsey, Sydney Gainforth, Gabi Wing, Audrey Martin, Aaliyah Amore Berry, Brooke Watley, Kiruthika Venkatesan, Rachel Bienstock, Annabella Brotherston, Madison Bryant, Mia Burgener, Emma P. Lieb, Rachel A. Johnson, Jennifer L. Hoffman, Kania Campbell, Kiena Campbell, Courtney Cassidy, Sage Krzyzkowski, Maddox Jones, Skylar Abookire, Luke Hawkins, Sunnah Yoon, Andrea Chu, Yan Qin, Nyah Cubbison, Brian Gearity, Daniel Mcintosh, Mariely Cruz, Edward Garrido, Grady Dionne, Nicole Doris, Lyndsie Salvagio, Ann-Charlotte Granholm-Bentley, Anna Dymov, Hannah Eckert, Gabrielle Welsh, Erica Larson, Charlie Ernst, Anna Zhou, Sarah Watamura, Larissa Fedorovich-Klein, Georgie Fields, Kimberly A. Guevara, Aven Mccall, Ben Peltier, Feruz Yahia, Patrick Flores, Jadyn Floyd, Sophia Forcier, J. Von R. Monteza, Peter Sokol-Hessner, Gwendolyn Geiger, Scott Nichols, Camryn Gunter, Kendal Hengst, Charlie Bednarz, Issy Garside, Addison Baker, Rachel Mina, Brooke Hermanson, Amanda Klingler, William Highfill, Sydney Jaques, Kerstin Lewey, Allison Grossery, Daniel Linseman, Ethan Lim, Jagger Livengood, Owen Mantelli, Gabby Pappas, Abby Mcdonald, Madeleine Dierking, Eve Miller, Emma Loeber, Anna Marlow, Michael Kerwin, Ella Mathews, Hillary Hamann, Khadija Mohamed, Vivian Nguyen, Gabri Notov, Ifunayachi Ogbonna-Ukuku, Sunil Kumar, Charles Baysah, Sarah Olson, Don Sullivan, Anna Paradiso, Jay Parrish, Mira Pronobis, Alisha Pravasi, Kerstin Haring, Diego Ramirez, Christopher Reardon, Juliana Ramirez, Casey Doherty, Ella Kestner, Teagan Weindel, Cate Billings, Pablo Torre-Walter, Lucy Rand, Samantha Reynolds, Mark Siemens, Khadeeja Rashid, Laine Satterlee, Piper Heilbronner, Lily Pound, Ben Whitehurst, Anna Respet, Lizzie Lesoing, Sydney Hertel, Aya Saad-Masri, Brooke Ballenger, Max Proske, Hannah Rosenberg, Ellia Nakahara, Sophia Espinoza, Ivan Woolhouse, Simon Ruland, Gorkem Er, Timothy Sweeny, Melaku Saketa, Michela Schenk, Maren Lynch, Madi Hamm, Grace Schroeder, Michelle Rozenman, Rana Seif, Jackson Hall, Marisela Simental, Daniel Paredes, Aaron Mena, Preston Spaan, Evelyn Stovin, David Andrew Swartz, Anh Tran, Daniel Pittman, Luke Farchione, Emily Boyer, Ukari Verner, Lacey Conrad, Jonathan Velotta, James Weiner, Jagger Gossett, Noah Sherry, Sam Proud, Ben Block, Avi Narayana, Zoey Weiss, Alyssa Wilson, Gabrielle Walsh, David Zonana, Keely Wright, Kena Riveria, Lillybelle Deer, Jena Doom, Elysia Davis, Isabelle Yaremenko, Caitlyn Young

DU Undergraduate Research Journal Archive

Abstracts from the DU Undergraduate Research Showcase.

Thermocatalytic Plasma-Assisted Dry Reforming Of Methane Over Ni/Al2o3 Catalyst, Tyler Wong

Seton Hall University Dissertations and Theses (ETDs)

Plasma catalysis is an advantageous approach that combines the effects of plasma with the enhancements of a catalyst. By utilizing a nickel catalyst in the plasma discharge zone of a dielectric barrier discharge (DBD), it can give an enhancement to the electrical field, boost microdischarges, and increase conversion and selectivity rates of CH₄ and CO₂ in the dry reforming of methane (DRM) reaction.

Industrial application of nickel catalysts in DBD Plasma DRM process are limited by poor stability, which is caused by the sintering of active metal particles and coke deposition on the catalyst surface. In this work, …

Synthesis Of Cuo/Zno And Mgo/Zno Core/Shell Nanoparticles With Plasma Jets And Study Of Their Structural And Optical Properties, Raghad S. Mohammed, Kadhim A. Aadim, Khalid A. Ahmed

Karbala International Journal of Modern Science

This paper reports the synthesis of CuO/ZnO and MgO/ZnO core/shell nanoparticles using atmospheric plasma jets. The characterization of the synthesized CuO/ZnO and MgO/ZnO core/shell nanoparticles were confirmed by a series of techniques, including X-ray diffraction (XRD), scanning electron microscopy (SEM), X-ray dispersive spectroscopy (EDS), transmission electron microscopy (TEM), and UV–Vis spectroscopy. The XRD analysis confirmed no other peaks related to the secondary phases for CuO, MgO, or ZnO, indicating the purity of these nanoparticles. Additionally, EDX analysis confirmed the formation of high purity CuO/ZnO and MgO/ZnO core/shell nanoparticles. The surface morphology, which represented the high agglomeration rate, was investigated using …

Simulation Studies On The Interactions Of Electron Beam With Wastewater, X. Li, S. Wang, Helmut Baumgart, G. Ciovati, F. Hannon

Electrical & Computer Engineering Faculty Publications

The manufactured chemical pollutants, like 1,4 dioxane and PFAS (per- and polyfluroralkyl substances), found in the underground water and/or drinking water are challenging to be removed or biodegraded. Energetic electrons are capable of mediating and removing them. This paper utilizes FLUKA code to evaluate the beam-wastewater interaction effects with different energy, space and divergence distributions of the electron beam. With 8 MeV average energy, the electron beam exits from a 0.0127 cm thick titanium window, travels through a 4.3 cm distance air and a second 0.0127 cm thick stainless water container window with 2.43 cm radius, and finally is injected …

Hot Electron Chemistry On Bimetallic Plasmonic Nanoparticles, Bryn E. Merrill, Bingjie Zhang, Jerry Larue

Student Scholar Symposium Abstracts and Posters

Catalysis provides pathways for efficient and selective chemical reactions through the lowering of energy barriers for desired products. Gold nanoparticles (AuNP) show excellent promise as plasmonic catalysts. Localized surface plasmon resonances are oscillations of the electron bath at the surface of a nanoparticle that generate energetically intense electric fields and rapidly decay into energetically excited electrons. The excited electrons have the potential to destabilize strongly bound oxygen atoms through occupation of accessible anti-bonding orbitals. Tuning the anti-bonding orbitals to make them accessible for occupancy will be achieved by coating the AuNP in a thin layer of another transition metal, such …

Spectroscopy And Formation Of Lanthanum-Hydrocarbon Radicals Formed By Association And Carbon-Carbon Bond Cleavage Of Isoprene, Wenjin Cao, Dilkrushi Hewage, Dong-Sheng Yang

Chemistry Faculty Publications

La atom reaction with isoprene is carried out in a laser-vaporization molecular beam source. The reaction yields an adduct as the major product and C—C cleaved and dehydrogenated species as the minor ones. La(C₅H₈), La(C₂H₂), and La(C₃H₄) are characterized with mass-analyzed threshold ionization (MATI) spectroscopy and quantum chemical computations. The MATI spectra of all three species exhibit a strong origin band and several weak vibronic bands corresponding to La-ligand stretch and ligand-based bend excitations. La(C₅H₈) is a five-membered metallacycle, whereas La(C₂H_{2 …}

Lanthanum-Mediated Dehydrogenation Of Butenes: Spectroscopy And Formation Of La(C4H6) Isomers, Wenjin Cao, Dilkrushi Hewage, Dong-Sheng Yang

Chemistry Faculty Publications

La atom reactions with 1-butene, 2-butene, and isobutene are carried out in a laser-vaporization molecular beam source. The three reactions yield the same La-hydrocarbon products from the dehydrogenation and carbon-carbon bond cleavage and coupling of the butenes. The dehydrogenated species La(C₄H₆) is the major product, which is characterized with mass-analyzed threshold ionization (MATI) spectroscopy and quantum chemical computations. The MATI spectrum of La(C₄H₆) produced from the La+1-butene reaction exhibits two band systems, whereas the MATI spectra produced from the La+2-butene and isobutene reactions display only a single band system. Each of these …

Plasma Temperature Measurements In The Context Of Spectral Interference, Brandon Seesahai

Honors Undergraduate Theses

The path explored in this thesis is testing a plasma temperature measurement approach that accounts for interference in a spectrum. The Atomic Emission Spectroscopy (AES) technique used is called Laser Induced Breakdown Spectroscopy (LIBS) and involves focusing a laser pulse to a high irradiance onto a sample to induced a plasma. Spectrally analyzing the plasma light provides a "finger print" or spectrum of the sample. Unfortunately, spectral line broadening is a type of interference encountered in a LIBS spectrum because it blends possible ionic or atomic transitions that occur in plasma. To make use of the information or transitions not …

Reconfigurable Solid-State Dye-Doped Polymer Ring Resonator Lasers, Hengky Chandrahalim, Xudong Fan

Faculty Publications

This paper presents wavelength configurable on-chip solid-state ring lasers fabricated by a single-mask standard lithography. The single- and coupled-ring resonator hosts were fabricated on a fused-silica wafer and filled with 3,3′-Diethyloxacarbocyanine iodide (CY3), Rhodamine 6G (R6G) and 3,3′-Diethylthiadicarbocyanine iodide (CY5)-doped polymer as the reconfigurable gain media. The recorded lasing threshold was ~220 nJ/mm² per pulse for the single-ring resonator laser with R6G, marking the lowest threshold shown by solid-state dye-doped polymer lasers fabricated with a standard lithography process on a chip. A single-mode lasing from a coupled-ring resonator system with the lasing threshold of ~360 nJ/mm² per pulse …

Localized Surface Plasmon Resonance Of Single Silver Nanoparticles Studied By Dark-Field Optical Microscopy And Spectroscopy, Wei Cao, Tao Huang, Xiao-Hong Nancy Xu, Hani E. Elsayed-Ali

Electrical & Computer Engineering Faculty Publications

Localized surface plasmon resonance (LSPR) of Ag nanoparticles (NPs) with different shapes and disk-shaped Ag NP pairs with varying interparticle distance is studied using dark-field optical microscopy and spectroscopy (DFOMS). Disk-, square-, and triangular-shaped Ag NPs were fabricated on indium tin oxide-coated glass substrates by electron beam lithography. The LSPR spectra collected from single Ag NPs within 5×5 arrays using DFOMS exhibited pronounced redshifts as the NP shape changed from disk to square and to triangular. The shape-dependent experimental LSPR spectra are in good agreement with simulations using the discrete dipole approximation model, although there are small deviations in the …

Q-Switched And Mode Locked Short Pulses From A Diode Pumped, Yb-Doped Fiber Laser, Seth M. Swift

Theses and Dissertations

A diode-pumped, ytterbium (Yb)-doped fiber laser system was designed and demonstrated to operate in continuous wave (cw), passively Q-switched and possibly passively mode locked operation. To our knowledge, this was the first fiber laser oscillator built at the Air Force Institute of Technology. A Cr⁴⁺:YAG (Chromium: Ytterbium Aluminum Garnett) crystal was used as a saturable absorber to generate Q-switched pulses. Attempts to mode lock the laser were performed using a semiconductor saturable absorber mirror (SESAM) and through nonlinear polarization rotation (NPR). The best output power result was 5 Watts (W) while pumping at 8.3 W, yielding 60% efficiency …

Real-Time Plasma Controlled Chemistry In A Two-Frequency, Confined Plasma Etcher, Vladimir Milosavljevic, Albert R. Ellingboe, Cezar Gaman, John V. Ringwood

Articles

The physics issues of developing model-based control of plasma etching are presented. A novel methodology for incorporating real-time model-based control of plasma processing systems is developed. The methodology is developed for control of two dependent variables (ion flux and chemical densities) by two independent controls (27 MHz power and O2flow). A phenomenological physics model of the nonlinear coupling between the independent controls and the dependent variables of the plasma is presented. By using a design of experiment, the functional dependencies of the response surface are determined. In conjunction with the physical model, the dependencies are used to deconvolve the sensor …

Predicted Properties Of Microhollow Cathode Discharges In Xenon, J. P. Boeuf, L. C. Pitchford, K. H. Schoenbach

Bioelectrics Publications

A fluid model has been developed and used to help clarify the physical mechanisms occurring in microhollow cathode discharges (MHCD). Calculated current-voltage (I-V) characteristics and gas temperatures in xenon at 100 Torr are presented. Consistent with previous experimental results in similar conditions, we find a voltage maximum in the I-V characteristic. We show that this structure reflects a transition between a low-current, abnormal discharge localized inside the cylindrical hollow cathode to a higher-current, normal glow discharge sustained by electron emission from the outer surface of the cathode. This transition, due to the geometry of …

Excimer Emission From Cathode Boundary Layer Discharges, Mohamed Moselhy, Karl H. Schoenbach

Bioelectrics Publications

The excimer emission from direct current glow discharges between a planar cathode and a ring-shaped anode of 0.75 and 1.5 mm diameter, respectively, separated by a gap of 250 μm, was studied in xenon and argon in a pressure range from 75 to 760 Torr. The thickness of the “cathode boundary layer” plasma, in the 100 μm range, and a discharge sustaining voltage of approximately 200 V, indicates that the discharge is restricted to the cathode fall and the negative glow. The radiant excimer emittance at 172 nm increases with pressure and reaches a value of 4 W/cm² for …

Xenon Excimer Emission From Pulsed Microhollow Cathode Discharges, M. Moselhy, R. H. Stark, K. H. Schoenbach, U. Kogelschatz

Bioelectrics Publications

By applying electrical pulses of 20 ns duration to xenon microplasmas, generated by direct current microhollow cathode discharges, we were able to increase the xenon excimer emission by more than an order of magnitude over direct current discharge excimer emission. For pulsed voltages in excess of 500 V, the optical power at 172 nm was found to increase exponentially with voltage. Largest values obtained were 2.75 W of vacuum-ultraviolet optical power emitted from a single microhollow cathode discharge in 400 Torr xenon with a 750 V pulse applied to a discharge. Highest radiative emittance was 15.2 W/cm². The …

Absolute-Convective Instabilities And Their Associated Wave Packets In A Compressible Reacting Mixing Layer, F. Q. Hu, T. L. Jackson, D. G. Lasseigne, C. E. Grosch

Mathematics & Statistics Faculty Publications

In this paper the transition from convective to absolute instability in a reacting compressible mixing layer with finite rate chemistry is examined. The reaction is assumed to be one step, irreversible, and of Arrhenius type. It is shown that absolute instability can exist for moderate heat release without backflow. The effects of the temperature ratio, heat release parameter, Zeldovich number, equivalence ratio, direction of propagation of the disturbances, and the Mach number on the transition value of the velocity ratio are given. The present results are compared to those obtained from the flame sheet model for the temperature using the …