Plasma and Beam Physics Commons^™

Effect Of Anode Size On The Properties Of Constricted Hollow Anode Pulsed Plasma Source, Nirav Patel, Garret Seckinger

Discovery Day - Daytona Beach

With the advent of ion thrusters, burns requiring large velocity changes can be performed with a fraction of the propellant required by traditional chemical rocket engines. However, current ion thrusters produce thrust in the order of millinewtons and thus cannot be viable for launching vehicles or burns requiring velocity changes in a small amount of time. Furthermore, current ion thrusters experience grid and component erosion, where the two grids at the termination of the nozzle slowly erode due to particle impact, and the hot electrodes degrade due to high thermal load. This limits the life of ion engines, which require …

Determining The Electric Field In A 10 Ns Pulsed Plasma In Fuel-Air Mixtures Using Efish, Md Ziaur Rahman, Christopher J. Kliewer, Brian D. Patterson, Chunqi Jiang

Bioelectrics Publications

Transient plasma ignition (TPI) utilizes non-equilibrium plasmas, produced by nanosecond high-voltage pulses, to improve lean-fuel combustion performance and reduce emission. It is known that the relatively high reduced electric field (E/N) in TPI plays an important role in generating energetic electrons and facilitating energy-efficient radical productions, resulting in reliable ignition for lean combustion. Determining the reduced electric field in the discharge is hence important for the understanding of the TPI process and ultimately allowing for the control of the plasma chemistry. This study reports spatiotemporally resolved measurements of the electric field (E) in a 10 ns pulsed plasma that is …

Low Energy Ion Irradiation Effects In Electronic Devices And Materials, David C. Mccall

All Dissertations

The physics and engineering of ion-solid interactions are governed by the ion beam characteristics (flux, charge, energy) and target(s) in question. Here I present work on two projects related to the extraction of a high flux of low charge state Argon ions from a commercial plasma source and the irradiation of an engineered target, a transistor, with high charge state Argon ions.

An end-Hall ion source that produces a a high current plasma of ions and electrons in a rough vacuum environment is characterized. Using a Langmuir probe and multiple pressure measurements, the ion and electron content of the source …

Characterization Of A Magnetically Contained Hot Filament Plasma Source With A Wide-Sweeping Langmuir Probe, Jonas Rowan

Doctoral Dissertations and Master's Theses

Ionospheric plasma research in the Space and Atmospheric Instrumentation Laboratory’s Space Plasma Chamber has been hindered by the lack of a suitable plasma diagnostic instrument and understanding of its hot-filament plasma source. This thesis describes efforts made to remedy both problems. A wide-range Sweeping Langmuir Probe was developed with a ±35 V sweeping range to fully analyze ion and electron saturation regions in the entire IV curve. A method was derived to estimate the chamber source’s filament temperatures. The new Langmuir probe was integrated into a refurbished automated system designed in Python to measure plasma parameters for various chamber conditions, …

Power-Beaming: Wireless Energy Transfer Using Lasers, Spencer L. Barnett

ATU Scholars Symposium

The objective of the project is to implement a wireless energy transfer system utilizing laser technology. This system involves modulating the laser’s beam profile and spatial distribution through precise optical manipulation. The energy transmitted by the laser is captured by a photovoltaic array, commonly referred to as a solar panel, which is engineered to convert incident photons into direct current (DC) electrical power. The current challenge is to develop a reliable wireless energy transfer mechanism capable of operating over extended distances, thereby overcoming the constraints imposed by wired connections, particularly in environments where wiring is impractical, such as in space. …

Developing Fixed-Bias Langmuir Probes For Multi-Point Constellation Deployments, Henry Carter Valentine

Doctoral Dissertations and Master's Theses

Since their initial development in the early 20th century, electrostatic Langmuir probes have proved invaluable in terrestrial and interplanetary ionospheric sounding applications. When deployed aboard rocket and satellite platforms, these probes yield high-cadence, in-situ measurements of key plasma parameters such as electron density, ion density, and electron temperature. Furthermore, the efficacy of Langmuir probes in characterizing the three-dimensional structure and dynamics of ionospheric plasmas can be augmented by the technique of multi-payload deployments. In this work, we discuss the design, development, and analysis of fixed-bias Langmuir probes constructed for two multi-point science campaigns: the Mars-bound, dual-satellite Escape and Plasma Acceleration …

Determining The Transient Electric Field And The Effect Of Pulse Repetition Frequency On The Field In A Repetitive 10-Ns Pulsed Discharge In A Quiescent Ch₄-Air Mixture, Chunqi Jiang

Bioelectrics Publications

The goal of this research is to understand the underlying physics enabled by nanosecond pulsed power in a discharge initiation and the following physicochemical processes that favor lean-fuel plasma ignition for combustion. The hypothesis of this project is that pulsed power waveforms such as the pulse repetition frequency (PRF), voltage amplitude, and dielectric surface alter the reduced electric field during the initiation of the discharge, resulting in different plasma properties, which will vary the physicochemical processes for efficient and selective radical productions. This is especially important for lean-burn combustion and reducing emission.

The Effect Of Electrode Geometry On Excited Species Production In Atmospheric Pressure Air-Hydrogen Streamer Discharge, Shirshak Kumar Dhali, Stuart Reyes

Electrical & Computer Engineering Faculty Publications

When a gas is overvolted at or near atmospheric pressure, it results in a streamer discharge formation. Electrode geometries exert significant impact on the electrical breakdown of gases by altering the spatial profile of the electric field. In many applications the efficient generation of radicals is critical and is determined by the characteristics of the streamer discharge. We examine the effect of electrode geometry on the streamer characteristics and the production of radicals. This is performed for three different electrode geometries: plane–plane, pin–plane, and pin–pin. A two-dimensional rotationally symmetric fluid model is used for the streamer discharge simulation in the …

Design And Commissioning Of An E-Beam Irradiation Beamline At The Upgraded Injector Test Facility At Jefferson Lab, Xi Li, Helmut Baumgart, Charles Bott, Gianluigi Ciovati, Shaun Gregory, Fay Hannon, Mike Mccaughan, Robert Pearce, Matthew Poelker, Hannes Vennekate, Shaoheng Wang

Electrical & Computer Engineering Faculty Publications

The Upgraded Injector Test Facility (UITF) at Jefferson Lab is a continuous-wave superconducting linear accelerator capable of providing an electron beam with energy up to 10 MeV. A beamline for electron-beam irradiation has been designed, installed and successfully commissioned at this facility, aimed at the degradation study of 1,4-dioxane and per- and polyfluoroalkyl substances (PFAS) in wastewater treatment. A solenoid with a peak axial magnetic field of up to 0.28 T and a set of raster coils were used to obtain a Gaussian beam profile with a transverse standard deviation of ∼15.0 mm at the target location. Monte-Carlo simulations using …

Compact -300 Kv Dc Inverted Insulator Photogun With Biased Anode And Alkali-Antimonide Photocathode, C. Hernandez-Garcia, P. Adderley, B. Bullard, J. Benesch, J. Grames, J. Gubeli, F. Hannon, J. Hansknecht, J. Jordan, R. Kazimi, G. A. Krafft, M. A. Mamun, M. Poelker, M. L. Stutzman, R. Suleiman, M. Tiefenback, Y. Wang, S. Zhang, H. Baumgart, G. Palacios-Serrano, S. Wijethunga, J. Yoskowitz, C. A. Valerio Lizarraga, R. Montoya Soto, A. Canales Ramos

Electrical & Computer Engineering Faculty Publications

This contribution describes the latest milestones of a multiyear program to build and operate a compact −300  kV dc high voltage photogun with inverted insulator geometry and alkali-antimonide photocathodes. Photocathode thermal emittance measurements and quantum efficiency charge lifetime measurements at average current up to 4.5 mA are presented, as well as an innovative implementation of ion generation and tracking simulations to explain the benefits of a biased anode to repel beam line ions from the anode-cathode gap, to dramatically improve the operating lifetime of the photogun and eliminate the occurrence of micro-arc discharges.

Ignition Of A Plasma Discharge Inside An Electrodeless Chamber: Methods And Characteristics, Mounir Laroussi

Electrical & Computer Engineering Faculty Publications

In this paper the generation and diagnostics of a reduced pressure (300 mTorr to 3 Torr) plasma generated inside an electrodeless containment vessel/chamber are presented. The plasma is ignited by a guided ionization wave emitted by a low temperature pulsed plasma jet. The diagnostics techniques include Intensified Charge Coupled Device (ICCD) imaging, emission spectroscopy, and Langmuir probe. The reduced-pressure discharge parameters measured are the magnitude of the electric field, the plasma electron number density and temperature, and discharge expansion speed.

Spark Discharge Coupled Laser Multicharged Ion Source, Md. Haider A. Shaim, Hani E. Elsayed-Ali

Electrical & Computer Engineering Faculty Publications

A spark discharge is coupled to a laser multicharged ion source to enhance ion generation. The laser plasma triggers a spark discharge with electrodes located in front of the ablated target. For an aluminum target, the spark discharge results in significant enhancement in the generation of multicharged ions along with higher charge states than observed with the laser source alone. When a Nd:YAG laser pulse (wavelength 1064 nm, pulse width 7.4 ns, pulse energy 72 mJ, laser spot area on target 0.0024 cm²) is used, the total multicharged ions detected by a Faraday cup is 1.0 nC with …

A Prototype Microwave Cavity Control Circuit For Use In Next Generation Free Electron Laser, Josh Thompson, Peter Neal Barrina, Jiayi Jiang, Joe Frisch, Steve Smith, Daniel Van Winkle

STAR Program Research Presentations

One of the current programs at SLAC National Accelerator Laboratory is the Linac Coherent Light Source, or LCLS. Using the existing hardware of the last third of their linear accelerator (or “linac”), SLAC has created one of the most energetic X-ray free electron lasers (or “FEL”). Since 2009, LCLS has used this FEL to perform a wide range of experiments across all sciences, most notably ultrafast filming at the molecular scale. As requests for beam-time with this laser increases, SLAC is purposing a linac upgrade to better match this demand. This upgrade, named LCLS-II, will replace existing copper radio frequency …

Hand-Held Flyback Driven Coaxial Dielectric Barrier Discharge: Development And Characterization, Victor J. Law, Vladimir Milosavljevic, Neil O’Connor, James F. Lalor, Steven Daniels

Articles

The development of a handheld single and triple chamber atmospheric pressure coaxial dielectric barrier discharge driven by Flyback circuitry for helium and argon discharges is described. The Flyback uses external metal-oxide-semiconductor field-effect transistor power switching technology and the transformer operates in the continuous current mode to convert a continuous dc power of 10–33 W to generate a 1.2–1.6 kV 3.5 μs pulse. An argon discharge breakdown voltage of ∼768 V is measured. With a 50 kHz, pulse repetition rate and an argon flow rate of 0.5–10 argon slm (slm denotes standard liters per minute), the electrical power density deposited in …

Real-Time Plasma Controlled Chemistry In A Two-Frequency, Confined Plasma Etcher, Vladimir Milosavljevic, Albert R. Ellingboe, Cezar Gaman, John V. Ringwood

Articles

The physics issues of developing model-based control of plasma etching are presented. A novel methodology for incorporating real-time model-based control of plasma processing systems is developed. The methodology is developed for control of two dependent variables (ion flux and chemical densities) by two independent controls (27 MHz power and O2flow). A phenomenological physics model of the nonlinear coupling between the independent controls and the dependent variables of the plasma is presented. By using a design of experiment, the functional dependencies of the response surface are determined. In conjunction with the physical model, the dependencies are used to deconvolve the sensor …

Predicted Properties Of Microhollow Cathode Discharges In Xenon, J. P. Boeuf, L. C. Pitchford, K. H. Schoenbach

Bioelectrics Publications

A fluid model has been developed and used to help clarify the physical mechanisms occurring in microhollow cathode discharges (MHCD). Calculated current-voltage (I-V) characteristics and gas temperatures in xenon at 100 Torr are presented. Consistent with previous experimental results in similar conditions, we find a voltage maximum in the I-V characteristic. We show that this structure reflects a transition between a low-current, abnormal discharge localized inside the cylindrical hollow cathode to a higher-current, normal glow discharge sustained by electron emission from the outer surface of the cathode. This transition, due to the geometry of …

Optical Coherent Communication System Using Phase Shift Keying, Syed Javaid Iqbal

Student Works (2000-2009)

This thesis presents the experimental study and design of a coherent communication system by using phase shift keying (PSK). Systems are designed by using all passive elements, which make the system very easy to operate, and less maintenance is required. All the PSK designs are based on a single light source. In this thesis there are five different types of PSK with a single light source communication systems are designed. All designs are experimentally tested in free space. The systems are • All optical two-channel PSK communication system, by using single light source, "All optical single channel, two-way PSK communication, …

Optimisation Of Transverse Arc Array Laser, Albert Kok Foo Ng

Student Works (2000-2009)

A novel discharge scheme is proposed for the pumping of short wavelen,gth lasers. This scheme had been tested to produce fast current pulse and a 5 kA current in 60 nsec is obtained. Lasing action has been observed by using nitrogen gas. The laser line is 337 nm from the strong transitions of nitrogen molecules. The new discharge scheme is based on the concept of an arc array amplifier. It essentially consists of 48 pairs of electrodes which are lined up to form an array of arc discharge. Its electrical circuitry allows each pair of the electrodes to be decoupled …

Direct Current Glow Discharges In Atmospheric Air, Robert H. Stark, Karl H. Schoenbach

Bioelectrics Publications

Direct current glow discharges have been operated in atmospheric air by using 100 μm microhollow cathode discharges as plasma cathodes. The glow discharges were operated at currents of up to 22 mA, corresponding to current densities of 3.8 A/cm² and at average electric fields of 1.2 kV/cm. Electron densities in the glow are in the range from 10¹² to 10¹³  cm⁻³. Varying the current of the microhollow cathode discharge allows us to control the current in the atmospheric pressure glow discharge. Large volume atmospheric pressure air plasmas can be generated by operating microhollow cathode discharges …

Electric Field Induced Emission As A Diagnostic Tool For Measurement Of Local Electric Field Strengths, A. N. Dharamsi, K. H. Schoenbach

Bioelectrics Publications

The phenomenon of electric field induced (EFI) emission is examined in several diatomic and polyatomic molecules. The possibility of using this phenomenon as a diagnostic tool to measure, nonintrusively, the strength and direction of local electric fields in plasmas is discussed. An estimate of the EFI signal emitted in a typical application plasma is given. This yields a lower bound on the detector sensitivity necessary to exploit EFI emission in practical applications. It is concluded that, at present, the EFI signal could be measured by some very sensitive infrared detection schemes available. Current progress in infrared detector technology, if maintained, …